My VB looks like this at the moment
[Code]....
What I want to do is when a button is clicked, the range of data in columns 2-9 of the active row gets copied. Then a new sheet is created and the data is then pasted to a range in that new sheet.
The VB I have done so far works fine but its specific to a single range - it doesnt take account of the active row.
Looking for a macro that will copy a highlighted range to another sheet. I can get an row to move but not 3 rows.
View 5 Replies View RelatedSheet 1 has data entered into it, it is then printed out as a jobsheet, saved and the data cleared. There are certain fields on this sheet that are eventually manually replicated onto sheet 2. The row in which they must go on sheet 2 will always be the 'activerow' on that sheet from a previous operation. It would make life so much easier and save lots of time if I could incorporate copying cells C10,C12,K8,K12,M2,C27 and C29 from sheet 1 to respective cells H,I,J,M,N,R,S of the active row on sheet 2 before I carry out the clear data process.
View 6 Replies View RelatedI'm trying to create a copy of the active sheet and then rename the new copied sheet to what's in cell O4, which is a formula (see below) and then paste value cell O4 in B3 of the copied sheet. However, when I run this macro it doesn't seem to like the second line where I am renaming the sheet (run time error '1004').
"O4" =DATE(YEAR($B$3),MONTH($B$3)+1,DAY($B$3))
Sub NewMonth()
ActiveSheet.Copy Before:=Sheets(Sheets.Count)
ActiveSheet.Name = Range("O4").Value
ActiveSheet.Range("O4").Copy
ActiveSheet.Range("B3").PasteSpecial Paste:=xlPasteValues
End Sub
I would like a macro that will go to a fixed sheet, copy the format, go back to the previous sheet and paste the format. My problems arise going back to the previously activated sheet rather than just a fixed sheet.
View 2 Replies View RelatedI have a workbook that I want to copy two separate ranges from and then post to two different sheets. Range one on the active sheet from A4:K(no of rows will vary) to sheet Savoury Year, and range two A64:K(no of rows will vary) to Site Services Year. When pasting I want to paste it to the next empty row down.
Copy of workbook attached : Weekly Accounts.xls‎
I want DELETE the rows that contains 0 (zero or -) in column F (SALDO BRUTO), when I click the Button (Clear). And How I can copy from this sheet to a new sheet in this workbook, but the names of new sheet automatic rename to next date or 2, and next when I click the Button "Copy to New Sheet".
View 2 Replies View RelatedI am wanting to create a macro for excel that when run it it will copy the active worksheet and worksheet named "Timesheet" and copy them to a new Excel workbook named the same as the original file + "JobBrief".
View 3 Replies View RelatedI want to copy data from the current sheet, and past it in the "montly" sheet.
'i and j were defined above, with a Case statement
Range(" Ai:Cj").Select
Selection.Copy
Sheets("monthly").Select
' I want the upper left cell of the pasted area to be A11
Range("A11").Select
ActiveSheet.Paste
I get an error saying that I should select one cell and then paste. But I thought that that is what I did...
I have 2 excelfiles. The macro should copy the Sheet "SDH" from file "New file.xlsm" and paste it to the file "FileforUpdate.xlsm".
"FileforUpdate.xlsm" has already a Sheet called "SDH". This have to be deleted before past the sheet "SDH" from "New file.xlsm" .
After Copy, delete and past it should save the "FileforUpdate.xlsm" in it's folder and close the WB.
When a sheet is the active sheet i use the following to define a range.
View 6 Replies View RelatedI have this code I wrote (combining variations of existing ones).. but not very well. unfortunately doesn’t seem to work. It copies the information back onto itself
View 5 Replies View RelatedI'm trying to sort data on sheet1 and sheet2. I'm running all macros from sheet one and I need it to stay active all of the time. I'm using the following code to sort sheet2. When I sort the column on sheet2 with the code, I can not get back to sheet one without an error.
Worksheets("Sheet2").Activate
Columns("a:a").Select
Selection.sort Key1:= Range("a1"), Order1:=xlDescending, Header:=xlGuess, _
OrderCustom:=1, MatchCase:=False, Orientation:=xlTopToBottom, _
DataOption1:=xlSortNormal
I've tried
Worksheets("Sheet1").Activate
Columns("a:a").Select..............
I have managed to use ADO to copy data from a closed book to my active sheet. Problem : it copies only the text, and not the dates or figures...
Code:
Sub TestReadDataFromWorkbook()
' fills data from a closed workbook in at the active cell.
GetDataFromClosedWorkbook "H:P&LYE TempDiv P&LP&L Report 020312.xls", "A1:Z1000", Range("A1"), False
End Sub
Code:
Sub GetDataFromClosedWorkbook(SourceFile As String, SourceRange As String, _
TargetRange As Range, IncludeFieldNames As Boolean)
'GetDataFromClosedWorkbook "C:FolderNameWorkbookName.xls", "A1:B21", ActiveCell, False
'GetDataFromClosedWorkbook "C:FolderNameWorkbookName.xls", "MyDataRange", Range("B3"), True
[Code]...
I want my code to evaluate each cell in column B, and based on its value, copy the row from D to X and paste on the newly activated worksheet. I'm trying to use Offset, but it's not working.
View 6 Replies View RelatedSplit from: Clear Range To Right Of Active Cell Down. I was working through this the first step was to clear the contents of the cells. After they are cleared, I have another sub that then goes and retreives a unquie number and places it back at the top of the column that I just cleared. Would this same code that cleared the cells contents work to copy the contents of the active cell down that same column, until the cell to its right is blank? -R-
View 5 Replies View Relatedis there a way to have the same named range cover a range of cells regardless of which sheet you are on? They seem to want to default to the page you are on. I want to make some VBA subroutines that will go over each sheet, and perform the same functions on each sheet. All sheets have the same format, but different data. I guess worst case scenario I can just break down and use multiple workbooks, but this seems a little less desirable. Should I be dividing this into seperate posts?
View 3 Replies View RelatedI would like to create macro, where it would on macro run copy text from active cell and find that value in another sheet (in column H) and select that cell.
What I did is this:
I need to copy the Selected Sheet (Sheet name will be different each month) on a spreadsheet and paste the copy to the left of the selected Sheet. Then I need to copy and paste values the entire sheet of the sheet that the copy was made from (the one on the right). I am very new to macros, and I tried recording and manually editing the macro with no success. The number of sheets will be different always as I will be adding this to different workbooks and also because new sheets may be added to any workbook at any time. I attached my code that I came up with, as I am not familiar with code enought to "[code]" my code.
View 3 Replies View Relatedcan someone make a code for a range.Name = "match" as soon as active then that active cell is to be copied to cell C2.
View 9 Replies View RelatedI would like to run a calculation based on selected active range in sheet. I tried several methods and cannot make it work.
View 2 Replies View RelatedIs it possible for a Macro to read a cell say D:11 and copy that email address and send the active sheet to that email?
View 9 Replies View RelatedThe rows will differ depending on the Active Cell that's selected and I don't know how to specify this.
The range I want to copy is from Column B to DA on the worksheet ("Staff") which I want to paste to another worksheet ("Leavers"). This is as far as I got
'FindRemove = lstRemove.Value
'If FindRemove = "" Then End
' Goes to the start of the Data column
'Sheets("Staff").Select
'Range("B4").Select
' Tests current cell against FindRemove
'Do
'If ActiveCell.Value = FindRemove Then
'Call CopyPerson
'Exit Sub
'Else: ActiveCell.Offset(1, 0).Select
'End If
'Loop Until ActiveCell.Value = ""
'End Sub
How can I test in my VBA wether a named range (with a scope of sheet) exists on the active sheet?
Code:
If "EmployeeEmail" exists on the active sheet Then,
xxxx
Else
yyyy
End If
Using Excel 2010.
i have a main.xls file and two data file dat1.xls and dat2.xls
mail named file have ar - br- cr- dr- er -fr sheets
dat1 named file have ar-br-cr sheets
dat2 named file have dr-er-fr sheets
and all this files data source is
colomn source a - fd
row source 29-4000
i want to make two commandbutton to main file first for dat1 second for dat2 file and i need a code to use at this buttons to make
when dat1 and dat2 close
main file user when click first button
copy dat1 file ar sheet colomn source a - fd row source 29-4000 cells to main file ar sheet colomn source a - fd row source 29-4000 cells
copy dat1 file br sheet colomn source a - fd row source 29-4000 cells to main file br sheet colomn source a - fd row source 29-4000 cells
copy dat1 file cr sheet colomn source a - fd row source 29-4000 cells to main file cr sheet colomn source a - fd row source 29-4000 cells
I currently have the following macro running to set a chart's data values:
Sub C3Quarter12013()
'
' C3Quarter32013 Macro
'
'
ActiveSheet.ChartObjects("Chart 2").Activate
ActiveChart.PlotArea.Select
ActiveChart.SeriesCollection(1).Values = _
[Code] ......
When I copy the tab and change some of the data within the cells, I want the macro refer to the chart on the current tab and the values in the current tab - as currently it refers to only "Chart 2" and the values in the tab 'Figure 2 - WE OPH'.
I've tried changing the sheet name to ActiveSheet.name but that doesn't seem to work.
Hi. Does anyone know a formula to copy a selected range of cells on sheet one to a range on sheet three when a check box in checked. Ex. copy range a4:j4 on sheet one into a4:j4 on sheet three once the check box for on sheet one is checked?
View 9 Replies View RelatedMy requirement is as follows......
I want to get a copy of worksheet from specific workbook to active work book in which i want a copy of sheet get moved.
I have a Picture in a workbook kept open. ( workbook 1 )And i have some X workbook open....i want a copy of sheet from workbook 1 To X workbook which is currently active.
View 1 Replies View RelatedNeed a code using application.inputbox to get a range, then use that range to copy and paste the range's link and format to a different sheet? The specifics don't matter, I just can't figure out the syntax. Here is what I have currently:
View 2 Replies View Related