I'm looking for a piece of code, which would activate a certain Range i.e. the start of which would be in column A and the End in Column G. My problem is that the activated range of cells shuld be exactly in the same row as the currently active cell i.e. active cell B3 -> activated range A3:G3 .
View 6 Replies
I have got stuck on one piece of my code and having trouble fixing... Overall I am trying to find variable station name in cell L2 of Sheet 2 in Sheet 1 and then select and copy the data from the data in "cell L2 of Sheet 2" to the last entry of that row. I have attached an example test spreadsheet of the data and a macro is within Sheet 1 called test1. Please note that cell L2 in Sheet 2 will always be different station name and the station list in Sheet 1 will change with differing station name.
The code I am using is:
[Code] .....
The code that is not working and bringing up an error is:
[Code] .....
Attached File : Copy of Testexample.xlsm‎
I Have searched existing threads but cannot find the answer to my query,
As part of a longer macro, I want to sum all cells in a column which contains data. Each day the number of cells that contain data will vary.
I have tired specifying all the cells in the column which contain data as a range, by selecting the top cell and using the
Range(Selection, Selection, Selection.End(x1Down))
But I cannot get a SUM Formula of this range. If someone could show me the correct syntax to get a sum from a range like this I would be very grateful.
I have a form that loads and depending on the word selected in the drop down the following code loops through cells Q2:AC2 until it finds the word in one of those cells (the word will always be in one of the cells)
Code:
For Each c In Range("Q2:AC2").Cells
If c = period Then
c.Select
[Code]...
The active cell it finds will always change, i know I need something to code the active cell back but I don't know what it should be.
How can I define a range, only for the active cell?
View 6 Replies View RelatedI have this code I wrote (combining variations of existing ones).. but not very well. unfortunately doesn’t seem to work. It copies the information back onto itself
View 5 Replies View RelatedI would like to start off in col A, do an offset until a certain value is reached:
View 2 Replies View Relatedhow can I resize a from my active cell to a specific cell (eg. L1) and select all the cells in between? I am using this code to select the last cell after my data (active cell is in column A).
View 2 Replies View RelatedI am after a vba code that will sum the range from the activecell upwards.
The range does not go to the top of the column there are many blanks cells therefore it would need to
Range(Selection, Selection.End(xlUp)).Select
This is what I was working on and isn't very good and the sum formula does not work even though I have change the formula many times.
Code:
Sub Macro1()
Dim cellC As Range, rng As Range, topcell As Range, bottomcell As Range
Set bottomcell = ActiveCell.Offset(-1, 0)
Dim s1 As String
[Code] ..
When i click commandbutton1:
Copy Active cell (columnB), next cell (ColumnC), next cell (ColumnI), next cell (ColumnO) all of which exist in the same row.
I will then paste the values into another sheet in the next available row which i think i have mastered. the cells will be pasted next to each other i.e. instead of column B,C,I,O they will be pasted as column A,B,C,D.
My dilema is i am not sure if you can use multiple cell offsets to perform this or if it is better to use a loop.
I have some working code that makes a number of changes to an excel report using VBA. Each time I execute the code I am taken to a different point in the excel report (depending on user inputs). What I now need to do is to change the cell selection from a single cell to three cells.
For example, my code may result in cell B100 being the active cell. What I now want to do is change the selection from B100 to the range B100:B103. I would have thought I could write something simple like:
Sheets("Group").Range("ActiveCell:Offset(0, 2)").Select
I have tried every variation of the above but I can't seem to make it run. Where am I going wrong?
So the constraints are
1. if there's a value in name or names count => must be at least one value in test1 or test2
2. last value in names count must be equal to the sum of trues in B1:B4 Problem Is it possible to identify once any of the cells in A9:D12 are activated that once that range is deactivated I run the check to make sure the constraints are met, and populate default values in the case they are not?
Is it possible to identify once any of the cells in A9:D12 are activated that once that range is deactivated I run the check to make sure the constraints are met, and populate default values in the case they are not?
Trying to figure it out with a some combination of: checking if the last cell I was in was in the range and I am no longer in that range; using the selection change change event?
[Code]....
Attached File : HelpMeWorkbook.xlsx‎
I want my code to evaluate each cell in column B, and based on its value, copy the row from D to X and paste on the newly activated worksheet. I'm trying to use Offset, but it's not working.
View 6 Replies View RelatedSplit from: Clear Range To Right Of Active Cell Down. I was working through this the first step was to clear the contents of the cells. After they are cleared, I have another sub that then goes and retreives a unquie number and places it back at the top of the column that I just cleared. Would this same code that cleared the cells contents work to copy the contents of the active cell down that same column, until the cell to its right is blank? -R-
View 5 Replies View RelatedI am working on a macros that creates a new row for every data entry. Below is the macros that I have. In the new row, I want for the cells in columns F through O to merge right after creating the row. How do I go about this?
If Sigma = 0 Then
Selection.EntireRow.Insert ' New row for new entries
ActiveCell.Value = "NONE"
ActiveCell.Offset(1, 0).Select
End If
Im writing a macro and have a cell activated (using ActiveCell). If I want to select this cell (the activated one - i.e., k3) along with the 2 cells next to it (i.e., l3, and m3), how would i go about doing that?
I'm wanting to shift 3 cells downward and I know how to shift them down, but dont know how to select the cells i want.
I'd like to ranage the range selection from D1 to A1:B53, but a number of attempts have failed. but can't get it working.
Code:
FileName = "R" + Scheme + Product + "_" + Format((Date + 1), "DDMMYY") + ".RP3.txt"
Sheets("RP3").Select
Range("D1").Select
WholeText = ActiveCell.Value
Call OutPutFile(WholeText, FileName)
I'm trying to select a range of cells whereby the range is dependent on the currently active cell. I know you can use the "Activesheet.Range("A1:D2").select" method to select a range where the cells are always the same, but I'm after a dynamic selection where the values can be programmatically altered depending on some other result.
For example, let's say that I make a certain cell active (based on the result of some other formula), and I want to select the range of cells in the adjacent column that is X rows deep. Putting this into context, imagine the resultant active cell is B2, I then want to select the range C2:C10, but if the active cell is E10, the range selected would be F10:F18 (if active cell is X, then range would be Y:Z).
The Offset function would allow me to position the cell based on the current active one, but it doesn't let me select a range. The Range function only lets you choose either hard coded or index cells, e.g. "Range(cells(y,z), cells(y,z)).select", but this is still no good because I'd need to know the index value of the active cell (can this be done?).
can someone make a code for a range.Name = "match" as soon as active then that active cell is to be copied to cell C2.
View 9 Replies View RelatedI RECORDED THIS MACRO BUT I WILL LIKE TO MAKE TO AUTO SELECT THE ACTIVE CELL RANGE IS VARIABLE ON MY REPORTS MY CODE
Sub FORMAT_AS_A_TABLE()
ActiveSheet.ListObjects.Add(xlSrcRange, Range("$A$1:$L$1900"), , xlYes).Name = _
"Table1"
Range("Table1[#All]").Select
ActiveSheet.ListObjects("Table1").TableStyle = "TableStyleDark5"
End Sub
How can I convert all cell values in active range to text format without losing the actual value.
For Ex.
0123 will remain 0123
07/12/2014 will remain 07/1/2014
3453 will remain 3453
regardless of there previous format. Currently I am doing this manually for every column before creating a load file for SQL database.
The rows will differ depending on the Active Cell that's selected and I don't know how to specify this.
The range I want to copy is from Column B to DA on the worksheet ("Staff") which I want to paste to another worksheet ("Leavers"). This is as far as I got
'FindRemove = lstRemove.Value
'If FindRemove = "" Then End
' Goes to the start of the Data column
'Sheets("Staff").Select
'Range("B4").Select
' Tests current cell against FindRemove
'Do
'If ActiveCell.Value = FindRemove Then
'Call CopyPerson
'Exit Sub
'Else: ActiveCell.Offset(1, 0).Select
'End If
'Loop Until ActiveCell.Value = ""
'End Sub
I'm creating a Macro to paste a series of formulas from a template in hidden rows above to cells further down in the same worksheet. My code works fine if I set an absolute range as the Destination - here's a portion of it:
Sub TimelineRow150()
Dim TimelineMatch As Integer, ProjectPlan As Object
TimelineMatch = ActiveCell.Offset(0, -1).Value
If TimelineMatch = 26 Then
Range("E26:AQ28").Select
[Code]....
I'd like to be able to copy and paste this code to run it multiple times in the same worksheet, (the TimelineMatch variable actually has 26 different options). Is there a way to replace the [Range("E150:AQ152").Select] portion of the code with a range that is relative to the Active Cell? (I'd instruct users that cell E be the Active cell before running the Macro, and E to AQ is still the range I need the copied data to appear.) I've tried using ActiveCell.Offset, but I keep getting an error of Method 'Range of Object' _Global' failed.
whenever the active cell is within a given range, highlight the cell on the same row in column S (by changing its interior colour). This should occur each time the active cell is changed, whether by cursor keys or mouse. The effect would be similar to the row and column highlights at left and top of the worksheet.
This action should be restricted to one sheet in the workbook.
It's for Excel 2003.
i try to paste in active cell copied range.
I mean that i do follow:
- i select range of cell - mostly range of column f.e. A2:A500
- i click/select on any free cell (f.e. B1)
- then i run macro
i expected it paste unique values (text or number)
this dont work
i dont know how defined the range
Looking for a macro that will copy a highlighted range to another sheet. I can get an row to move but not 3 rows.
View 5 Replies View RelatedMy VB looks like this at the moment
[Code]....
What I want to do is when a button is clicked, the range of data in columns 2-9 of the active row gets copied. Then a new sheet is created and the data is then pasted to a range in that new sheet.
The VB I have done so far works fine but its specific to a single range - it doesnt take account of the active row.
All of a sudden, deleting an entire row has become a calculation too complicated for Excel to calculate. It seems the RANGE of even a single row exceeds 33,000 cells - and therefore I get a warning that this could take a long time. Ignoring this warning does no good - Excel then tells me it couldn't do it. "Excel cannot complete this task with available resources. Choose less data and or close other applications."
In another seemingly related problem, I used a macro to automatically extend my formulas down 15,000 rows. I had hoped that I'd never have to drag down formulas again. But instead, this action created a much larger range of cells Excel now seems to consider "active." That means I can no longer use my scroll wheel, for example, to navigate my 300-row spreadsheet, because the scroll wheel seems to move the cursor up and down as a percentage of the total document length - a length now 15,000 rows long - and whatever percentage of that length each click of the scroll wheel was supposed to cover is now too miniscule to notice.
How do I make this spreadsheet "small" again?
And am I right in believing I should just convert the thing to a table?
I have the following code Range("M402").Select
This very simple code brings me to M402 everytime I click on the button.
However, I would like to stay in the same column that I am at the moment when I click the button, and go to row 402. (i.e. if I am in cell "Z56", I would like to be redirected to "Z402" when I click the button.
I'm trying to sort data on sheet1 and sheet2. I'm running all macros from sheet one and I need it to stay active all of the time. I'm using the following code to sort sheet2. When I sort the column on sheet2 with the code, I can not get back to sheet one without an error.
Worksheets("Sheet2").Activate
Columns("a:a").Select
Selection.sort Key1:= Range("a1"), Order1:=xlDescending, Header:=xlGuess, _
OrderCustom:=1, MatchCase:=False, Orientation:=xlTopToBottom, _
DataOption1:=xlSortNormal
I've tried
Worksheets("Sheet1").Activate
Columns("a:a").Select..............
