The following does paste the formula into the dynamic range, however, it doesn't move on to the next step in the code. It seems to get stuck on the last line. I let it run for 5 minutes and it still did not move to the next set of commands ...
View 9 RepliesI would like to select cell A6 after pasting a large range so that when send to user the entire range is not selected. I tried
wsDestPage.Range("A6").Select
And
wsDestPage.[a6].Select
I receive
Select method of range class failed
How can I select a single cell after pasting the large range?
copy/paste Every Sheet Single ( P Column ) and Paste to Notepad and take P1 As file name for note pad.
View 1 Replies View RelatedI would like to copy a cell in v2 to from v3 to end of column v where there are values in column u.
View 4 Replies View RelatedI created the following code to copy the contents of b6 down. However, I need to modify the code to copy this formula =IF(M6=calculations!$E$34, N(B5)+1,N(B5)) down the range.
Sub copyformulas()
'copy and paste cells with formulas down. Select B6 throubh AH6 and copy the formulas down to the last employee ID.
Dim lr As Long
For Each SheetName In Array("All employees annualized", "All employee salary", "All employee hourly", "allmaleee", "allfemaleee", "cohort analysis", "minority", "nonminority")
With Worksheets(SheetName)
lr = .Cells.Find(What:="*", SearchDirection:=xlPrevious, SearchOrder:=xlByRows).Row
.Range("b6:b").AutoFill Destination:=.Range("b6:b" & lr)
End With
end sub
I had the following code that worked great with Excel 2003, but I receive an error with Excel 2007.
Dim Master As Workbook
Set Master = Workbooks("Master.xls")
For Each wb In Workbooks
wb.Activate
If wb.Name Like "S04*" Then _
If Not Range("A2") = Empty Then _
Range(Cells(Rows.Count, 1).End(xlUp), Range("A2")).EntireRow.Copy _
Master.ActiveSheet.Cells(Rows.Count, 1).End(xlUp).Offset(1)
Next wb
I receive error 1004 "application defined or object defined error" when it tries to paste to the "Master" sheet using the the above lines.
Is there something in the formatting that has changed with 2007? I'm guessing I have to slightly change the line in bold.
I am using the copy range command to copy cells from one worksheet to one that is generated on commandbutton click. Is there any way to 'paste' the cells in row 3 instead of row A?
The code i am using looks like this -
Worksheets("Products").Range("A" & i + 2).Resize(1, 6).Copy Range("C" & Rows.Count).End(xlUp).Offset(1)
This code works fine, but i want the data to start in row 5, not at the top.
Task:A user has to copy and paste a range of cells, if any row in column B has "PM" as a value.
I have several macros/VBS scripts that copy and paste from one workbook to another, how do I create a macro that says whatever row "PM" is in copy range F:BC on that row
My issues is the fact the PM can be in any row in column B in different sheets. Example.xlsx
can someone make a code for a range.Name = "match" as soon as active then that active cell is to be copied to cell C2.
View 9 Replies View RelatedWhat can I add to the macro I already have in place (below) to accomplish what I'm looking for (2 parts)? ...
1) I need to copy everything (formulas) that is in C7:F7 and paste it down to all "active" rows - I'm defining an active row by any row where column A is not blank.
2) I need to copy everything (formulas) that is in Q7:AF7 and paste it down to all "active" rows - I'm defining an active row by any row where column P is not blank. (You'll notice by the screenshot that there will be blank cells in column P mixed in with non-blank cells.)
Code:
Sub AdminTool()
'
' CreateAdminTool Macro
'
'
ActiveWindow.Zoom = 90
Rows("1:1").Select
Selection.Insert Shift:=xlDown, CopyOrigin:=xlFormatFromLeftOrAbove
[Code] ...........
I am carrying out some sensitivity testing on a model, and would like to greatly increase the speed of the process by being able to call in from a user defined cell a named range, which is then pasted to the right of the cell.
The attached file steps through the process I have in mind.
Please see attached sample worksheet. Column A will be generated by the user manually.
I'm looking for a way in VBA to have A1:D20 in Sheet2 copied and pasted in the "Bank Reconciliation" Sheet based on how many "Markets" there are in Column A. Then, once that's complete to have A22:D30 (the smaller box in Sheet2) copied and pasted directly below those results.
I have what the macro would hopefully generate to the right in "Bank Reconciliation" (B6:E54) as an example. So if there's a market in A1, copy and paste the box to B6. If there's a market in A2, copy and paste the box directly below the first (B26) etc. etc. until it's done, then paste the smaller box directly below whatever the macro generates.
Book2.xlsx
I am successfully opening a .csv file using a variable value stored in a named range in my Main file (the variable includes the directory and path).
I copy data from the .csv file to the Main file then I need to close the .csv file without saving but I want to do that by using the
Windows("xxxx").Activate
command where "xxxx" is the namedrange in my Main file which stores the .csv filename (without the directory and path prefix).
I can use the
ActiveWindow.ActivatePrevious
command but if I have another workbook open, this one closes instead of the .csv file I opened from the macro.
I realise this is probably very basic and I've searched the forums but can't find any identical postings.
I'm trying to find a macro that will copy data from the areas of B120:E179 and I120:K179 for example (linked to another worksheet within the workbook) and special paste (Values Only and skipping blank cells) it to the next available open cell up top where basic data entry will be taking place B10:E29 and I10:K29. I need it to only copy/paste the rows with data (skipping all cells/rows with no data) and once it is finished coping I will need it to place an "X" in column M next to the row that it copied data from. I would also need it to reference the data in each row from B to E and if there is an entry say on B14 to E14 that matches it but if I10 to E29 are blank then paste that information on row 14. If it does not match or if those columns are full then paste on next available line.
I hope I'm making sense here. This is for a vehicle tracking log between checkpoints. Each driver and info will be listed on each row. Columns B through E will contain information for each driver: name, badge, #passengers, and vehicle #. The log lists location, time, and destination for outgoing travelers in columns F to H. Incoming info is listed on Columns I to K............
I Want users to be able to copy a reference number from a an external program into excel, this works well for single cells but the cell I want them to be able to paste the information into is a merged cell and keep getting the "Data on the clipboard is not the same size and shape blah blah error". What I can do to get this information to paste? Is there some VBA that can kinda trick the cell to believe its single or when pasting it unmerges and then remerges again?
View 1 Replies View RelatedI have a worksheet with 14 columns. Column 12 is either blank or when I finish that project, from a drop down menu I pick Yes. What I am hoping for is that as soon as I hit yes the line will be cut from the first sheet labeled Open and pasted to the next available row on the second sheet labed Closed. On the first sheet that blank row is eliminated so there are no spaces and on sheet two it always looks for the next available row as to not over write any data.
Also, to make sure I am doing this right too, I would right click the tab then click view code, paste it into the window (below the drop down that says (General) click file save workbook then file close and return to excel correct? One last thing, while looking at this page it shows my worksheet I call Open is really sheet 16 and closed is really sheet 17.
I'm trying to write a macro, and the first thing I need it to do is paste a value into the currently selected cell. This value, though, will usually be multiline. So when I try to do it now, it pastes into the selected cell and the cells below it (one for each line of the pasted value). When I'm pasting manually, I avoid this by pressing F2 to edit the cell first, and then pasting. But how can I do this using a macro? Is there a type of paste command that will insert the multiline value from the clipboard into the selected cell?
View 2 Replies View RelatedI have read post re this question but have not been able to answer my problem. I get the error message 'Application defined or object defined error' when running the code below. I should indicate the range counter currently indicated about 6,200 rows that this code will work on and the individual range names in the list of 6,200 rows are spread over at least 20 worksheets.
The code appears to be running but after some time it stops on the line of code 'Range(Cells(i, 1).Value) = Cells(i, 2)'.
Sub PopulateWithImportData()
Dim counter As Integer
counter = Sheets("Imported Data").Range("Counter")
Application. ScreenUpdating = False
Application.Calculation = xlCalculationManual
Worksheets("imported data").Select
Range("a1").Select
i = 1
Do Until i = counter
Range(Cells(i, 1).Value) = Cells(i, 2)
i = i + 1
Loop
how to copy the contents of multiple comment boxes and paste in a single comment box.
The big picture is that I have a number of cells with numerical values in and text in comment boxes. I want to be able to click a button to copy the contents of the comment boxes and paste them, along with the numerical value from the cell, into a single comment box, ordered by highest to lowest value within the comment box, then delete the original cells and comments.
I am quite new to VBA but have been coping quite well so far with information of the web and analysing recorded macros.
Trying to assign code to comm. button on User form to copy lets say:
(sheet1, rangeB2:B21) to (sheet2, first blank row rangeB2:B21) and paste it as text value one more question: what to be aware in case of sheets format (merged cells, hidden rows...)
Need a code using application.inputbox to get a range, then use that range to copy and paste the range's link and format to a different sheet? The specifics don't matter, I just can't figure out the syntax. Here is what I have currently:
View 2 Replies View RelatedTo initialize some cells/ranges, I am copying a given range and pasting it to another given range using the. Copy and .PaseSpecial methods. However, it would seem that both methods actually select the range(s) for the operations, i.e. the given ranges(s) are activated/selected thus changing the focus on the spreadsheet. I would like to perform both operations without actually selecting the given ranges.
View 5 Replies View RelatedI have been struggling for a while to copy data from one worksheet to another and reset the target range.
The copy bit is cool, the range resetting bit is not. I have tried various methods, but none seem to work.
For example, the below code generates an error: "Compile error: Argument not optional"
I have stuck the particular command button script below to let you see what I am trying to do:
Private Sub cmbFilter_Click()
Dim sCriteria As String
On Error Resume Next
I have the following code that let's the user choose and " import" data to an existing sheet. It works well up until now. The problem is that the three ranges that I am trying to copy the data from on workbook to another has changed size. In previous version of my workbooks the range was two columns by 10 rows. Now, it is 1 column by 10 rows. So, when I run this macro it doesn't work because the two ranges are different. Is there any way to:
1) Only copy over one of the rows of a range thus making the macro run?
2) Do not run that part of the macro if there is an error?
Thanks so much for reading this long-winded description but the error is a big problem
Private Sub CommandButton1_Click()
Import_Data_Form.Hide
Run "UnProtectAll"
Set b = Selection
ad = b.Address
' Local Variables
Dim wkbDataFile As Workbook
i try to paste in active cell copied range.
I mean that i do follow:
- i select range of cell - mostly range of column f.e. A2:A500
- i click/select on any free cell (f.e. B1)
- then i run macro
i expected it paste unique values (text or number)
this dont work
i dont know how defined the range
im currently using a Code that copies a visible range from one workbook and pastes that Range to another workbook. I dont like it though because every time it pastes the screen jumps.
I tried setting Range 1 = Range 2, its not giving me an error but its not "pasting" the information to the 2nd workbook.
I know ive done it before by doing each cell in each row individually but a its a big Data Table and that would take too long.
I am using the code below to copy a range and paste it over a variable range.
View 4 Replies View RelatedBasically, i have a common workbook template that is used by multiple users across the business to request a cost for numerous new products.
Within the template, there is a common section at the top, where specific project information is entered. There is also a table beneath where 1 or many products can be entered, with specific information relating to that product in the same row.
All the submitted requests are uploaded via an email attachment, to a particular sharepoint directory.
What i would like to do in the master workbook is the following:-
1. Open in turn every uploaded workbook within the sharepoint directory and copy the following cells into the master workbook, each in it's own row (or next available), with the data in adjacent cells.... 1st cell to enter data is $B6.
Cells to copy from each sheet:
Common info contained within cells:
$DG$2,$N$11,$N$12,$N$19,$N$13,$AO$7,$AO$8,$AO$9,$AO$10,$AO$11,$AO$12,$AO$12,$AO$13,$AO$14,$BO$8,$BO$11,$BO$14
Product specific info: $U37, $AD37, $AH37, $DH37, $C37, $O37
Depending on the number of products requested, we need to repeat (loop?) until it finds the next blank row in the table. I have hidden a blank row in the table, so there will always be one!
All of the common information needs to be included for each product specific entry.
For each file, once the upload has been completed, i would like the file to be moved to another "archive" directory.
I have attached the template for information. The master workbook is still in development so can't share currently.
From E15:E150
Start with E16 and if it is blank than make it the same as the value above (If E16 is blank than E16 would have value of E15)
If it has a value than skip and go to next.... all the way through E150.
So an example would be:
E
15 ABQ
16
17
18 MFE
19 AUS
20
21 HOU
22
23
24
25 ATL
26
and so on
Would look like this after macro
E
15 ABQ
16 ABQ
17 ABQ
18 MFE
19 AUS
20 AUS
21 HOU
22 HOU
23 HOU
24 HOU
25 ATL
26 ATL
and so on
can somone tell me why the attached code will not work it works for the first
range only but when others added it fails also how do you clear outline of
copied cells, i used range ("D9").Select but no good.
-- Private Sub Workbook_Open()
Workbooks("Staff Details").Activate
Range("I4:I10")("C4")("C9")("G9").Select
Selection.Copy
Worksheets("Payslip").Activate
Range("B2:B8", "C11", "K11", "K12").Select
Selection.PasteSpecial Paste:=xlPasteValues, Operation:=xlNone,
SkipBlanks _
:=False, Transpose:=False
Range("D9").Select
End Sub
BD3