Paste Multiline Value Into Single Cell As Part Of Macro?
Feb 27, 2014
I'm trying to write a macro, and the first thing I need it to do is paste a value into the currently selected cell. This value, though, will usually be multiline. So when I try to do it now, it pastes into the selected cell and the cells below it (one for each line of the pasted value). When I'm pasting manually, I avoid this by pressing F2 to edit the cell first, and then pasting. But how can I do this using a macro? Is there a type of paste command that will insert the multiline value from the clipboard into the selected cell?
View 2 Replies
ADVERTISEMENT
Feb 13, 2007
I've been looking on the forum for hours, but couldn't find exactly what I need.
I have a textbox that the user enters muliple lines of text. I, then, copy the text to a sheet. The problem I'm having is the pasted text is all in one cell. I would like each line to be in a different cell.
My textbox has multiline = true, wordwrap = true, EnterKeyBehavior = true.
View 3 Replies
View Related
Mar 2, 2012
I want the VB Code to do the following;
For each row in Column C, if the text starts with "Calls from service no", it must extract the last word and paste it into corresponding row in Column A. So if the macro finds a cell in Column C starting with "Calls from service no..", then the last word (the last word will always be a number and is seperated with a space) of this cell must be pasted in cell A45. So it must continue for all occurances in Column C. Sample of text in cell = "Calls from service no 0431324345" and "Calls from service no 3242134254" etc.
I also require similar, but this time it must extract as shown below.
If text is found in Column C starting with "Local" or starting with "Long Distance" or starting with "Mobile", only this text, ie "Local" or "Long Distance" or "Mobile" must be pasted in Column B.
It can be 2 different macros that I can run.
View 9 Replies
View Related
Sep 17, 2009
I have a cell with entries as follows for example
abcd
efgh
ijkl
i would like to split it over multiple columns. Let me be a little more specific.
my data is arranged as follows in the cell
abcd<space><enter>
efgh<space><enter>
ijlk<space>
I want it as follows in ONE cell as follows
abcd<space>efgh<space>ijkl
OR
Column 1 Column 2 Column 3
abcd efgh ijkl
1. "Data -->Text to columns" : doesn't work for some reason, only my first string "abcd" is being read. Please do remember I have more than a thousand entries so manual change on each cell would be difficult.
2. =clean() : removes the spaces making data splitting impossible.
3. =trim() : same as above
View 4 Replies
View Related
Dec 2, 2013
I Want users to be able to copy a reference number from a an external program into excel, this works well for single cells but the cell I want them to be able to paste the information into is a merged cell and keep getting the "Data on the clipboard is not the same size and shape blah blah error". What I can do to get this information to paste? Is there some VBA that can kinda trick the cell to believe its single or when pasting it unmerges and then remerges again?
View 1 Replies
View Related
Jan 12, 2009
The following does paste the formula into the dynamic range, however, it doesn't move on to the next step in the code. It seems to get stuck on the last line. I let it run for 5 minutes and it still did not move to the next set of commands ...
View 9 Replies
View Related
May 8, 2012
I have a worksheet with 14 columns. Column 12 is either blank or when I finish that project, from a drop down menu I pick Yes. What I am hoping for is that as soon as I hit yes the line will be cut from the first sheet labeled Open and pasted to the next available row on the second sheet labed Closed. On the first sheet that blank row is eliminated so there are no spaces and on sheet two it always looks for the next available row as to not over write any data.
Also, to make sure I am doing this right too, I would right click the tab then click view code, paste it into the window (below the drop down that says (General) click file save workbook then file close and return to excel correct? One last thing, while looking at this page it shows my worksheet I call Open is really sheet 16 and closed is really sheet 17.
View 14 Replies
View Related
Jan 20, 2007
I would like to select cell A6 after pasting a large range so that when send to user the entire range is not selected. I tried
wsDestPage.Range("A6").Select
And
wsDestPage.[a6].Select
I receive
Select method of range class failed
How can I select a single cell after pasting the large range?
View 5 Replies
View Related
Sep 6, 2012
copy/paste Every Sheet Single ( P Column ) and Paste to Notepad and take P1 As file name for note pad.
View 1 Replies
View Related
Feb 6, 2008
I have a sheet where i have many differently named areas (like state1_1 and state1_2) When I doubleclick on a cell then a macro should run with following criteria: 1) Macro will run if the doubleclicked cell is part of any range in the list. Here I mean that names of ranges which belong to that list start with word state (like state1_1 and state1_2). No other ranges should not be in that list. If the cell is not in the range that is part of the list, then nothing should happen.
View 2 Replies
View Related
Jul 18, 2014
I am looking for some VB to import multiple csv files, stored in a single directory, into a single excel worksheet. However I am looking to also include all or part of the filename, so to differentiate each file.
I've attached an example spreadsheet, inc the below code, of what I am trying to achieve.
Current code is (this parsers all .csv files in the specified folder into a single worksheet):
[Code] ......
Attached File : csv_loader.xlsm‎
View 6 Replies
View Related
Jun 18, 2014
Here is the code I'm working on:
I want this code to replace the value of s with the value of a cell.
sub Macro2()
Dim s As String
s= value of (cell F2)
Range("I8").Select
ActiveCell.FormulaR1C1 = "='[(s).xlsm]Payroll Computation '!R8C11"
End Sub
View 5 Replies
View Related
Mar 16, 2007
1st - Need a macro to change a range of cells colours based on a single cell having a value greater than 0.001. ie. cells A1 - G1 need to change to grey based on cell F1 having a value greater than 0.001 entered in it?
2nd - Also a macro for deleting the text contents of cell C1 based on cell F1 having a value greater than 0.001. Therefor if cell F1 has a number greater than 0.001 it changes the colour of celss A1 - G1 and also deletes the text in cell C1?
View 2 Replies
View Related
Aug 4, 2007
I have 2 basic parts to a Macro which need to be separated by a pause of 1 second, before proceeding to the next part of the macro. Then pause for 1 second, and loop.
Application.Wait is no good to me as the spreadsheet must remain live, editable, and receiving updates from an external program linked via DDE. Below is the ...
View 6 Replies
View Related
Jan 31, 2014
I am running a macro and I need to add this example of text corresponding to the #of line in the exact way, at the end of the data. I was able to do by loading an external file, however, I have to set a path to it, but only I can use it. I want to be able to give to my colllegue so she can also run the macro and have that note at the bottom on the data too.
The total should be in 12 row as per the example...
Note example.xlsx
View 5 Replies
View Related
May 13, 2014
I have data that looks like this:
ADD ADD 5
ADD EMPTY 2
AGAINAGAIN26
AGAIN EMPTY17
AGAINBACK 1
ALL ALL 24
ALL EMPTY19
ALRIGHT FINE 1
ALRIGHT OKAY 2
ALRIGHT ALRIGHT3
ALRIGHTEMPTY3
ALRIGHTRIGHT1
I want it to look like this:
ADD ADD EMPTY
5 2
AGAINAGAINEMPTY BACK
26 17 1
ALL ALL EMPTY
24 19
ALRIGHTFINE OKAY ALRIGHTEMPTYRIGHT
1 2 3 3 1
i.e all the entries from column B that have the same thing in column A should be on a row together, with the number from column C under them.
If that's a bit hard then it would be OK if it looked like this:
ADD ADD 5
ADD EMPTY 2
AGAINAGAIN26
AGAIN EMPTY17
AGAINBACK 1
ALL ALL 24
ALL EMPTY19
ALRIGHT FINE 1
ALRIGHT OKAY 2
ALRIGHTALRIGHT3
ALRIGHTEMPTY3
ALRIGHTRIGHT1
test.xlsx
View 5 Replies
View Related
Jan 14, 2010
I have a couple of active x text boxes that I am using in a user form to enter data to a sheet. I wasn't able to get the text to move to the next line, but I changed the Multiline and EnterKeyBehavior to True and now when I hit enter it is working how I want it to. But when I click ok on my user form it is putting the data where I want it but it is putting a symbol that looks like a ? with a border around it in where I am pressing enter. Is there a way to avoid having this symbol show up?
The other question I have is if it is possible for specific text to be Bold in the text box and some not? I haven't been able to figure out a solution for that.
View 9 Replies
View Related
Nov 15, 2012
Example: A1, I go to school (001). I would like to copy only (001) and past to B1. like that and process to the last row of A1. or I would prefer manual last row.
View 9 Replies
View Related
Nov 1, 2009
I want to put a value in a single cell - A1 is going to be (say) 5.
View 5 Replies
View Related
Feb 13, 2014
I basically have a five column spreadsheet containing address information. While most cells only contain one piece of information, I have quite a few cells that have multiple lines of data in them because the individual has more than one address.
Here is an example. Note that Rows 1-2 contain single address info for each individual person. However, row 3 contains an individual with 3 pieces of address information in the four right hand columns:
Row 1: Unique ID | Name | Street Address | City | State | Zip Code
Row 2: Unique ID | Name | Street Address | City | State | Zip Code
Row 3: Unique ID | Name | Street Address | City | State | Zip Code
[carriage return in street address, city, state and zip cells]
--------------------------------- |Street Address | City | State | Zip Code
[carriage return in street address, city, state and zip cells]
--------------------------------- |Street Address | City | State | Zip Code
Row 4: Unique ID | Name | Street Address | City | State | Zip Code
Row 5: Unique ID | Name | Street Address | City | State | Zip Code
Please note that some individuals have 2-4 different addresses.
I would like to manipulate the 5 rows of example data above so that when I am done I have the following:
1. 7 rows of data (5 individuals with 7 total addresses)
2. Automatically copy and paste the unique id number and name into the two new rows that were created so that I have the following:
Row 1: Unique ID - 001 | Joe Chang | Street Address | City | State | Zip Code
Row 2: Unique ID - 002 | Joey Chung | Street Address | City | State | Zip Code
Row 3: Unique ID - 003 | John Smith | Street Address | City | State | Zip Code
Row 4: Unique ID - 003 | John Smith | Street Address | City | State | Zip Code
Row 5: Unique ID - 003 | John Smith | Street Address | City | State | Zip Code
Row 6: Unique ID - 004 | Jane Derry | Street Address | City | State | Zip Code
Row 7: Unique ID - 005 | Julie March | Street Address | City | State | Zip Code
View 9 Replies
View Related
Feb 2, 2009
I have been trying to find a macro that would allow me to keep a running total in a cell by adding a number to that cell and the same cell would display the sum of the numbers entered. {i.e.} If cell a1 has 0 in it and i click on that cell and put 3 in it would display 3 if i added 2 to it it would display 5 and so on. I need it to do this for about 182 cells on one page.I found this macro that runs automatically every time and works great......But only for one cell so far..."D3"...Ugh!!! I need this macro to work for the following range of cells "colums d thru j from row 3 down to 28 in each colum. Each cell is an individual. There are 182 cells total that each need this macro to work ...all on one page
Private Sub Worksheet_Change(ByVal Target As Excel.Range)
Static dAccumulator As Double
With Target
If .Address(False, False) = "D3" Then
If Not IsEmpty(.Value) And IsNumeric(.Value) Then
dAccumulator = dAccumulator + .Value
Else
dAccumulator = 0
End If
Application.EnableEvents = False
.Value = dAccumulator
Application.EnableEvents = True
End If
End With
End Sub
As you see the macro includes cell D3 only, I have made several attempts to include more cells but have failed.... I tried like this
If .Address(False, False) = "D3,E3,F3,G3,H3,I3,J3,D4,E4...and so on" Then
I have tried ....If .Address(False, False) = "D3:J3" Then
and I have tried ....If .Address(False, False) = "23Rx7C" Then
I can make it work for cell d3 but not the others. Will I have to repeat this code for every cell?
View 9 Replies
View Related
Jun 11, 2014
I have Useform1 & Textbox1 & Textbox2 & CommandButton1
*Textbox1 = Identifier where to put the "X" mark when data is found
*TextBox2 = The User Data 'It is a multiline textbox
*CommandButton1 = Execute the macro
*Excel Column "B3" = Where the textbox2 data will be compared. this one has default data.
*Excel Row 2 = the identifier where to put the "X" mark when the data is found.
The user will enter data in textbox2, For each TextBox2 Value it will be compared in the Data in Column B3 only If the Textbox1 Value found in Row2 which has the codes. Then when the Value is found. it will mark with "X" in the column where the TextBox1 value found. see my screenshot.
Form Screenshot : Capture2.PNG
ExcelSheet Screenshot : Capture1.PNG
Right now I only have this code.
[Code] ....
View 3 Replies
View Related
Oct 3, 2012
I want to run a macro to Import Entire Text File in Single Cell
I have some Text Files in a Directory
Code:
Eg: C:Records
Each Sub Folder will have 1 Text File
Code:
Eg: C:RecordsFolder1Text File1.txt
C:RecordsFolder2Text File2.txt
C:RecordsFolder3Text File3.txt
I want to import Each Text File into One Single Cell Like
Code:
Row Column A Column B
1 Text File1 Text File1 Content
2 Text File2 Text File2 Content
3 Text File3 Text File3 Content
4
5
Is it possible to this through VBA.
View 4 Replies
View Related
Aug 16, 2013
I have an excel document with multiple excel sheets(sheet1, sheet2...etc), now every sheet contains a cell "total".
Now I want to copy the row containing "total" from all the sheets into another sheet called "report".
View 9 Replies
View Related
Sep 21, 2009
I had the following code that worked great with Excel 2003, but I receive an error with Excel 2007.
Dim Master As Workbook
Set Master = Workbooks("Master.xls")
For Each wb In Workbooks
wb.Activate
If wb.Name Like "S04*" Then _
If Not Range("A2") = Empty Then _
Range(Cells(Rows.Count, 1).End(xlUp), Range("A2")).EntireRow.Copy _
Master.ActiveSheet.Cells(Rows.Count, 1).End(xlUp).Offset(1)
Next wb
I receive error 1004 "application defined or object defined error" when it tries to paste to the "Master" sheet using the the above lines.
Is there something in the formatting that has changed with 2007? I'm guessing I have to slightly change the line in bold.
View 9 Replies
View Related
Jul 30, 2013
Is this possible using code: Copy Cell A1 and Paste in first empty Cell down Column D. This would be connected to a command button. Both Cell A1 and Column D are on the same spreadsheet.
View 3 Replies
View Related
Feb 6, 2014
I am trying to write a macro for CUT & PASTE from one column to another.
The data is always in cell 'I', and should be transfered to cell 'F' (CUT & PASTE).
However, not all the cells in column 'I' are populated, therefore it is required to skip the empty cells.
View 1 Replies
View Related
Aug 9, 2007
I am trying to do a paste special of this code from Paul into a specific cell so that when the conditions are met the cell will update automatically. The code works great, I just have to manually run it.
I have tried to copy all of it as it stands here then use the paste special, paste only values; but it pastes the text in the cell and adjacent cells. I have done this before successfully with simple formulas, not actual code. The cell is clean where I want to paste this also, no strange formatting or anything like that.
I have this great code but can not use it….
Sub test()
If Range("B13") <= Date Then
Range("E13").Copy
Range("F13").PasteSpecial Paste:=xlValues
Application.CutCopyMode = False
End If
End Sub
View 14 Replies
View Related
Dec 11, 2013
I have the following code, so far:
Code:
Sub CopyPasteValue()
Dim ARow
Dim AColumn
Dim BRow
Dim BColumn
Dim Value
AColumn = 1
[Code]....
What I want it to do is to start in cell B1 and look down until it finds a non-blank cell; copy the contents of that cell. I then need it to go to the same row Col A and go down from until it finds the first non-blank cell then paste into the corresponding cell in Col B. It should continue this way through the rest of the worksheet. There is no set pattern to say to go down 5 rows or such. Also the number of pastes in each step is variable from 1 to ??
In my worksheet, the first non-blank cell in Col B is cell B3 and the first non-blank cell in Col A is A7. The paste should occur in cells B7:B10 because the next non-blank cell in Col A is A11.
View 2 Replies
View Related
May 30, 2002
Is it possible to do a macro to copy a cell in excel and paste that cell in outlook and return to excel
View 9 Replies
View Related
