Cut And Paste Row Of Data To New Worksheet Based On Single Cell Value
May 8, 2012
I have a worksheet with 14 columns. Column 12 is either blank or when I finish that project, from a drop down menu I pick Yes. What I am hoping for is that as soon as I hit yes the line will be cut from the first sheet labeled Open and pasted to the next available row on the second sheet labed Closed. On the first sheet that blank row is eliminated so there are no spaces and on sheet two it always looks for the next available row as to not over write any data.
Also, to make sure I am doing this right too, I would right click the tab then click view code, paste it into the window (below the drop down that says (General) click file save workbook then file close and return to excel correct? One last thing, while looking at this page it shows my worksheet I call Open is really sheet 16 and closed is really sheet 17.
View 14 Replies
ADVERTISEMENT
Jan 8, 2009
I'm looking to create a macro that will take data from an input sheet, and paste it into a cell in another worksheet, based on criteria specified in sheet1.
Specifically in the attached example, the macro would copy the data in cells C8:C10 of sheet 1, then paste them into sheet 2 based on the data specified in cell B3 i.e. it would paste them into the column headed Mar-09. I intend to make this cell a drop down, so that the user can then select the next reporting month and run the macro again to paste the data into the Apr-09 column.
View 2 Replies
View Related
Oct 18, 2013
I have a workbook with many sheets of similar but not identical data. I need to extract columns from each sheet based on 5 header criteria and paste them to a single sheet. Each worksheet contains these 5 criteria.
I've been working with the VBA script I've pasted below. It's grabbing the 5 column criteria that I have in sheet 12, and comparing them to sheet 1 in the workbook, then copying them to sheet 12. This much is good, but I need the script to also return the data from the other worksheets as well. I've tried modifying the script based on other loop functions in other scripts I've found, but I'm not having any luck.
View 14 Replies
View Related
Nov 29, 2013
I want to control what a user enters into a single cell based on others.E.g.
A B
1 20 500
2 50 500
3 75 500
4 100 300
Column A is a thickness and column b is a width what I want to happen if the user enters a thickness in cell D1 and a width in cell D2 I want an error to pop up if for instance the user enters 100 as a thickness to only allow a maximum of 300 in the width. likewise if the user enters a thickness less than 100 in cell D1 to allow him to enter up to 500.
View 4 Replies
View Related
May 14, 2009
I have the following code in another workbook that is used to populate a cell on the same sheet based on input to cells in column 'A'.
Is it possible to modify this for the attached workbook to select a cell with data (numbers) on the Input Data sheet in column 'E', add text to the beginning, ('CG' in this case), and paste the result to the Import Template in the corresponding cell of column 'A'? I currently have a formula copied to dozens of cells in 'A' but since the number of rows for the Input Template is variable, there are usually cells in 'A' that contain CG but no corresponding data in the rest of the row.
View 8 Replies
View Related
Aug 13, 2014
I have a 'Summary' worksheet which is shown as:
August
September
October
Example 1
1
4
5
The table, which works correctly, looks in another worksheet 'Report' for 'Example 1' within the date range of August. This uses COUNTIFS.
Ideally, what I'm wanting to do is have an auto-filter on each of the cells - 'Example 1', 'Example 2', so if a user wants to see what rows on the 'Report' sheet, falls into this criteria, it auto filters the other worksheet, and takes them too it.
The action would be - Click on the cell of 'Example 1', the macro auto-filters based on the cells value in column F of the 'Report' sheet, and takes the user there. The macro would have to take into account the date filter as well, which uses cells A1,B1 for August, and C1,D1, for September.
View 1 Replies
View Related
Mar 24, 2007
I am trying to write a macro to do the following: Loop through a range of cells on a worksheet Sheet1 M17:M46 and if there is text in the cell then Copy all the data to the left Of Coumun M in the same row and paste the values to the next open row of a range A17:L46 on another worksheet (sheet2.) Basically the text in column M is an idicator to add the data to an order sheet. If there is no text don't add the data , look in the next row etc.
I'm not sure if this is the way to go
Sub CopyRows()
Worksheets("sheet1").Select
FinalRow = Range("M65536").End(xlUp).Row
' Find the last row of data
' Loop through each row
For x = 2 To FinalRow
' Decide if to copy based on column M
ThisValue = Range("M" & x).Value
' could be any value
If ThisValue = "yes" Then
Worksheets("sheet2").Range("A" & x & ":L" & x).Copy
Worksheets("sheet1").Select
NextRow = Range("A65536").End(xlUp).Row + 1
Range("A" & NextRow).Select
ActiveSheet.PasteSpecial = xlValues
Worksheets("sheet1").Select
End If
Next x
End Sub
View 4 Replies
View Related
Dec 2, 2013
I Want users to be able to copy a reference number from a an external program into excel, this works well for single cells but the cell I want them to be able to paste the information into is a merged cell and keep getting the "Data on the clipboard is not the same size and shape blah blah error". What I can do to get this information to paste? Is there some VBA that can kinda trick the cell to believe its single or when pasting it unmerges and then remerges again?
View 1 Replies
View Related
Jan 12, 2009
The following does paste the formula into the dynamic range, however, it doesn't move on to the next step in the code. It seems to get stuck on the last line. I let it run for 5 minutes and it still did not move to the next set of commands ...
View 9 Replies
View Related
Feb 27, 2014
I'm trying to write a macro, and the first thing I need it to do is paste a value into the currently selected cell. This value, though, will usually be multiline. So when I try to do it now, it pastes into the selected cell and the cells below it (one for each line of the pasted value). When I'm pasting manually, I avoid this by pressing F2 to edit the cell first, and then pasting. But how can I do this using a macro? Is there a type of paste command that will insert the multiline value from the clipboard into the selected cell?
View 2 Replies
View Related
Jan 20, 2007
I would like to select cell A6 after pasting a large range so that when send to user the entire range is not selected. I tried
wsDestPage.Range("A6").Select
And
wsDestPage.[a6].Select
I receive
Select method of range class failed
How can I select a single cell after pasting the large range?
View 5 Replies
View Related
Jan 30, 2014
I have an Excel 2010 spreadsheet consisting of many worksheets (20 or so). Each of these worksheets contain detail level data regarding different projects. One of the columns in these worksheets is the 'Status' column (column F). There is conditional formatting on this column where if the text is 'G' then change background to a green color, 'Y'=yellow, 'R'=Red and 'U'=Grey.
The first worksheet is a summary sheet that I would like to pull information from each of the detail worksheet's columns B, D, E, G and H if the status column (Column F) is 'R' or 'Y'.
The number of rows in the detail worksheet can change each week (as few as 0 and as many as 100)
View 2 Replies
View Related
Jan 23, 2013
I created a sort of FORM worksheet that uses lookups to pull a bunch of information (so the user does not have to key it all in,) and transfers it to a second worksheet (database worksheet), when the user clicks a "Submit" button.
The functionality is fine when used by one individual, but I am now going to have 9 different users working within this Shared file.
I seem to have worked out any of the other kinks related to the Shared file, but I'm having one problem that I should have foreseen.
The code below is looking for the next available empty row in the database sheet and copying the data there.
My problem is that the file is not updated in real-time, so if entries are submitted in a narrow time-frame, the data is fighting for the same row, and deleting one row-item or another.
My question is, is there a way to modify what I already wrote to fix this problem?
If not--the solution that I am thinking of is creating NINE separate worksheets and mapping the data into those individualy.
So... IF we have Sally, John, Scott, Dave, Jenn They each have their own worksheet.
From looking at the below, I am thinking the best option would be obviously mirroring the template for each user, and modifying this portion:
VB:
Option Explicit
[U]Dim wsData As Worksheet
[/U]Dim wsForm As Worksheet
Dim wsPCD As Worksheet
Dim rNextCl As Range
Dim rNextC2 As Range
[Code]....
Will that work transitioning into the rest of the code? I'll assume that the above needs revised as I'm new to this all.
VB:
Option Explicit
Dim wsData As Worksheet
Dim wsForm As Worksheet
Dim wsPCD As Worksheet
Dim rNextCl As Range
Dim rNextC2 As Range
[Code]....
View 2 Replies
View Related
Jan 13, 2010
In Sheet1 I've got a list of names in column A, then I've got a worksheet for each name in the list. I'd like to fill in column B with information from the worksheet of the same name as in column A.
Quick example...name in column A is Davis, want to fill in column B with a value from cell C3 on worksheet named Davis and do it for the entire list. Data being looked for is in same cell on each worksheet. Tried using a formula and dragging it down the list, problem with that is it doesn't change the sheetname just the cell.
View 3 Replies
View Related
Jan 27, 2014
how to consolidate all data from all worksheets into a single worksheet(master sheet)?
Untitled.png
In the attachment, data for worksheet 1 will be added to the masterlist and worksheet 2 will follow.
View 3 Replies
View Related
Mar 14, 2014
I have my workbook set up so that one worksheet contains the names of all my departments/sections listed with their 3 letter code (this can be anything from AAA-ZZZ, e.g 'FYH', 'JWK' or 'KZA' are all valid) in Column F. I then have Columns H, I, J & K blank and require them to be auto-filling based on data from 4 other worksheets - i'll detail what i need below, but Column H needs to be filled based on what it finds in worksheet 'Data 1', Column I should be filled based on what it finds in worksheet 'Data 2' etc. etc. I have four further worksheets that contain data based on the types of assets owned by the department/section, these are 'Data 1', 'Data 2', 'Data 3' and 'Data 4' and I use these as described above, with Column H referring only to 'Data 1', Column I only to 'Data 2', Column J only to 'Data 3' and Column K only to 'Data 4'.
What i need then, is a VBA that will take the value of a cell in column F on my main worksheet (called 'main') and then count the number of occurences of that value in Coulumn A on another worksheet and place the number of occurences into Column H, I, J or K based on which sheet it's checking.
For example, Cell 'F2' on my main worksheet contains the value "ABC". I need to take "ABC" and search Column A of worksheet "Data 1" to find how many time it occurs, placing the result into Column H of worksheet 'Main', I then need the same value to be counted in Column A of 'Data 2' and its result placed into Column I on 'Main', and again for Column A of 'Data 3' with the result being put into Column J of 'Main', and finally Column A of 'Data 4' to be checked and that result placed into Column K on 'Main'.
does this seem too much of a task for VBA? or am i best doing each column separately with a CountIf or Array formula?? Not sure whether a COUNTIF or Array formula will do the job.
View 5 Replies
View Related
Mar 14, 2014
I have my workbook set up so that one worksheet contains the names of all my departments/sections listed with their 3 letter code (this can be anything from AAA-ZZZ, e.g 'FYH', 'JWK' or 'KZA' are all valid) in Column F. I then have Columns H, I, J & K blank and require them to be auto-filling based on data from 4 other worksheets - i'll detail what i need below, but Column H needs to be filled based on what it finds in worksheet 'Data 1', Column I should be filled based on what it finds in worksheet 'Data 2' etc. etc. I have four further worksheets that contain data based on the types of assets owned by the department/section, these are 'Data 1', 'Data 2', 'Data 3' and 'Data 4' and I use these as described above, with Column H referring only to 'Data 1', Column I only to 'Data 2', Column J only to 'Data 3' and Column K only to 'Data 4'.
What i need then, is a VBA that will take the value of a cell in column F on my main worksheet (called 'main') and then count the number of occurences of that value in Coulumn A on another worksheet and place the number of occurences into Column H, I, J or K based on which sheet it's checking.
For example, Cell 'F2' on my main worksheet contains the value "ABC". I need to take "ABC" and search Column A of worksheet "Data 1" to find how many time it occurs, placing the result into Column H of worksheet 'Main', I then need the same value to be counted in Column A of 'Data 2' and its result placed into Column I on 'Main', and again for Column A of 'Data 3' with the result being put into Column J of 'Main', and finally Column A of 'Data 4' to be checked and that result placed into Column K on 'Main'.
does this seem too much of a task for VBA? or am i best doing each column separately with a CountIf or Array formula?
View 2 Replies
View Related
Feb 23, 2014
I data on a master document and have data sent in from various independent offices which I would like to reconcile. Each region along with the master is posted onto a separate worksheet in my spreadsheet but I would like to copy specific information in worksheet order and paste row by row onto single worksheet in order to run a comparison. The data needed is in the same order but the number of rows reported on each work sheet will differ day by day. If worksheet 1 displays 50 rows in the consolidated sheet I would like worksheet 2 start in row 51, if however worksheet 1 finished in 24, I would like worksheet 2 to start in 25. Now I also want each worksheet to start reporting once the previous worksheet is complete and when there is no data in a specific worksheet, I would like the process to be able to continue.. so sheet 1 reports, then sheet 2 but sheet 3 has no data so it jumps to sheet 4 to begin.
For example consider various cities, New York, London, Frankfurt & Tokyo, each has sales of various products from a catalogue range but the products sold differ each week based on regional trends. The master document which is independent also reports sales but this is manual so I would like to pick up any inaccuracies through reconciliation.
Outside of VBA and Macros, is it possible to get excel to report data sheet by sheet onto one in a continuous order?
View 3 Replies
View Related
Sep 6, 2012
copy/paste Every Sheet Single ( P Column ) and Paste to Notepad and take P1 As file name for note pad.
View 1 Replies
View Related
Apr 5, 2013
I've created drop-down lists in cells B3 and B4 (this is in worksheet 1), based on a column in Worksheet 2. I'd like Worksheet 2 to autofilter the data based on the drop-downs in B3 or B4, or both together.
View 2 Replies
View Related
Oct 8, 2012
[URL] to append summary data within several workbooks. But suddenly, it works for some workbooks, but for some others, it just captures the data for the very last WS.
View 9 Replies
View Related
Feb 1, 2008
I have several exel workbooks (.xls files) and each workbook contains multiple worksheets. The number of worksheets and their names are variable. Each worksheet is formated in the same way. Now I want to copy an specific cell range on each worksheet and copy it into a single worksheet.
For example let assume that we have a a workbook called temperature.xls. This file contains 4 worksheets named: 40-1, 40-3, 40-5#, and 40-22. I want to copy a specific cell range (F46:O47) from all the worksheets in the workbook temperature.xls and paste only the values on a summary worksheet. This summary worksheet can be in the same workbook or in different one. I just wanted to add that I want to repeat this process 15 more times to summarize all my data containing workbooks. On average each workbook contains 35 worksheets so it is a tedious manual process.
View 2 Replies
View Related
Sep 13, 2009
I have a set of related variables that are split over multiple worksheets, and I need to be able to take specific information, duplicate certain values and produce an output sheet for use in a separate piece of software.
The variables are:
Position Number (Sheet 1)
Position Title (Sheets 1 and 2)
Position Requirement (Sheet 2)
Requirement Importance (Sheet 2)
The output sheet requires a list of all the requirements for each position number, which means the position number itself needs duplicating (in new rows) X number of times, where X is the number of requirements assigned. The appropriate requirements are then to be pasted in next to each position number (and the requirements can be found by comparing position number to title, and from title to requirements).
Normally, I’d be able to do this using lookups and so forth, but my problem arises when I have multiple position numbers with the same related title (in the attached example, there are three plumbers with unique position numbers). I can’t figure out how to say to Excel “a plumber has five requirements, and there are three plumbers, so duplicate each position number for each plumber five times, then insert the appropriate qualifications (and their associated importance values) next to the position numbers”.
View 4 Replies
View Related
Sep 30, 2009
I've created a single worksheet that is essentially a "dashboard" type of report that displays data for a single employee/person. This worksheet (let's assume it's my "template") contains formulae that is driven by a single lookup cell (in this case, the employee's ID, in cell, for example, A1).
This "dashboard" report (for just one individual) needs to be duplicated for the entire employee population (let's say ~100 people); this employee population is stored as a list in a separate worksheet, in a single column.
Is there a vba solution that will copy my template and populate the cell A1 (of each duplicated template worksheet) with the the employee IDs - of course, it would be ideal if the solution can search in my employee ID list and continue down until there are no more IDs and create the same number of worksheets as there are IDs?
Because the macro is creating numerous worksheets, is it possible to name the worksheets based off of an adjacent value (in the same sheet as the IDs) to each respective ID (I'm thinking of a concatenation of the employees' IDs and names)?
One major wrinkle in this process: the above process would be ideal if the "template" worksheet won't change (i.e. no changes to formatting, no additional data elements, etc.) However, it's likely that the client will want to add/remove/change items/elements to the "template" dashboard. Assuming, at this point, all 100 worksheets for each individual/employee have been created, it would be a huge pain to manually add/remove elements from each sheet. Is there another macro that would delete ALL employee sheets? That way, I can re-modify my single template and just run the original macro to re-create my duplicate sheets (but populated with different IDs) again.
View 9 Replies
View Related
Jul 10, 2013
I've created an excel workbook with multiple sheets. One of the sheets is the "Master Sheet" and I used the formula =INDIRECT("'Master Sheet'!A"&ROW(A2)) so that columns A and B on every sheet match exactly what I input into the A and B columns on the Master Sheet. I used this formula because it would allow me to insert rows on the Master Sheet and have that reflected in the other sheets.
However, I've realized that this means the data I am inputting on the other sheets gets misaligned because if I make a change on the Master Sheet it the A and B columns on the other sheets, but all the rest of the columns on the other sheets stay where they are. How to make the rows shift up and down together on the other sheets.
View 3 Replies
View Related
Oct 18, 2013
I have been working on a macro that compares a existing list of data to an updated list of data and then either moves any data not on the new list over to a completed tab (followed by deleting the record on the existing sheet), and then adds any items not on the existing sheet, but which appear on the new list, to the existing list.
I have come across a stumbling block, i have managed to identify on the existing list the rows of data that have been removed from the new list and therefore need to be moved over to the completed tab, but when i select the data it selects the header row aswell (which will always remain the same row). Obviously this then pastes the header row aswell, and also i can't seem to get it to paste in the new sheet to the next available row (i.e this will be used daily and i don't won't to overwrite the infor already in the completed tab). the next issue i have is then when i go back to existing sheet to delete the data i just copied across, as the header was initially select this also gets deleted.
The code below, is the complete code, including filtering, copying some forumals etc. The area i am getting stuck on is highlighted in red:
Sub Update()
Dim bottomrow As Long
Dim My_Range As Range
bottomrow = Cells(Rows.Count, "C").End(xlUp).Row
Set My_Range = Range("A1:Y" & bottomrow)
[Code] .....
View 6 Replies
View Related
Jul 2, 2012
I have a range of cells each containing a name. Based on a number that has to be entered manually I want excel to return the names concatenated in one cell. So for example:
Number of variable entered: 5
q9001
q9002
q9003
q9004
q9005
q9006
etc.
Should give me: "q9001 q9002 q9003 q9004 q9005"
I have been trying to work with formulas using IF and CONCAT functions. But so far I haven't figured out how to have excel return me the correct amount of variables for each separate number that can be entered seeing the number of variables entered can vary from 1 up to 50.
(Using Excel 2010)
View 7 Replies
View Related
Aug 16, 2014
I have thousands and thousands of rows of data which look like the spreadsheet screen shot shown in this image:
ExcelConsolidateRaw.JPG
I want to consolidate them so that they look like the spreadsheet screen shot shown in this image:
ExcelConsolidateDesired.JPG
How to insert it into a module in the VBA editor.
View 3 Replies
View Related
May 3, 2007
I have an excel file having different columns. The test data is as under
Email HQ City Product Value
S@y.com XYZ BAC abc 10
S@y.com XYZ CAD bcd 20
S@y.com XYZ BAC abc 10
S@y.com XYZ CAD bcd 20
A@b.com XYZ BAC abc 10
A@b.com XYZ CAD bcd 20
A@b.com XYZ BAC abc 10
A@b.com XYZ CAD bcd 20
The above is sample data and the rows will change depending on data.
Based on email id the range should be picked up and the email should be send as a attchment.
View 9 Replies
View Related
Jul 28, 2009
I would like to format cells with a currency based on a value selected at the top of my worksheet. Cell C3 is a drop down of currencies. And I would like cells range E11:E200 to format in whatever currency selected in cell C3.
View 9 Replies
View Related
