Copy Value From Column A If Value In Column B At Same Position Is X
Oct 16, 2013
I have e.g. 3 colums, A, B and C.
In column A there is A number on every row.
In column B there is a number on ever row.
In column C I want to compile a new list such that if a number in column B is X (eg 1) the number from column A at the corresponding cell should be copied to column C. I want there to be no empyt cells in column C. So for the list below, the number in column A should be copied to C if its corresponding B cell is 0.
64
0
64
64
0
64
57
0
57
[Code] .......
View 4 Replies
ADVERTISEMENT
Jun 24, 2009
I have this code below that deletes any single occurrence of a customer number but the "Customer Numbers" must be in column A.
I would like to change the code below to instead look for the "Customer Number" column by name, rather than by column A. My "Customer Number" column will always be in row 1, but yet, it will be in a different column letter every time I run the report.
View 2 Replies
View Related
Feb 17, 2009
A simple question:
I have a column of numbers, for example:
2
5
5
8
8
8
20
50
I would like to know the value that corresponds to (for ex.) 5th position from, of course, the beginning of the column, ie 8.
View 2 Replies
View Related
May 26, 2009
How to find position of lust number in column (non macro preferably).
2
3
1
3
2
1
3
2
1
For number 1 match will return 3 but I need 9 (and I can't sort column opposite)
View 4 Replies
View Related
Jan 15, 2009
In the following code, you will find a sorting function with a range is hard coded. Instead of hard coded value which is marked with red colour, i need to find that range value dynamically. How to write a code to find that ?
View 2 Replies
View Related
Jan 9, 2014
I have 6 column charts that are supposed to be identical. There are 12 pair of columns per chart. Some chart's pair are centered over the tick and some pair are to the right of the tick and I can't figure out how to make them all the same.
View 1 Replies
View Related
May 16, 2014
I am trying to hide a column titled "Test". This column is usually column E, but it is possible it can be moved to column D or F. If I use:
[Code] .........
Then column E is hidden, regardless of whether Test is moved left or right. The reason Test moves is due to the user inserting or deleting a column.
View 5 Replies
View Related
Dec 12, 2009
I am trying to create a schedule using colors. The colors will indicate the start time, break time, lunch time, break time (second break) and end time. see attached document.
Thank you for attempting to solve this puzzle using formulas and or VBA code. I am trying to automate the schedule so the numerical times automatically appear when I "paint" the schedule.
View 5 Replies
View Related
Nov 10, 2011
I will be working with an array of data approx 500 rows by 50 columns (eg Sheet1!$A$1:$CV$500) in which I will need to check if approx 1000 unique values exist and in which column they appear in. Each unique value should not appear in more than 1 column. Once identified, I need to return the header value at the top of the relevant column.
My thoughts on approach would be perform a lookup of some sort to identify the column number and then use that within an index formula to return the header value based on the column number.
However, I'm not sure how to perform a lookup to get the column number. A match formula can, as far as I am aware, only lookup against a single column or single row.
View 3 Replies
View Related
Dec 1, 2012
trying to find the value of column A (date field) if it exists on the row that the cursor is presently on. I'm trying to check for the value before performing the next function to make sure the user is on a valid row. Cursor could be on any column A to F. Columns are always 6 but the rows can vary.
View 7 Replies
View Related
Jul 11, 2014
I have a data set, in which Sheet 1 have a matrix of high level showing Engineer, Program and commodity relationship.
I have to create separate sheet for each program on sheet 1, each program sheet should have Engineer name and commodity name from sheet 1.
Multiple commodities and multiple engineers should be separated by definite structure.
find worksheet with input and output (manual) as expected.
View 2 Replies
View Related
Oct 12, 2008
I am using the Column() Function for referencing purposes... what I want this function to do is return the "letter form" of the column position rather than the "number Form"... is there anyway to change this without switching to R1C1 form?
i.e. Column(B4) yields "2"
I want it to give me "B"
View 2 Replies
View Related
Mar 13, 2009
I am trying to get excel to search a workbook/(or worksheet if easier) for a matching unique value and fill in its associated data. My first workbook has the SKU (A) filled in but not the UPC (B). My second workbook has both the SKU (A) and the matching UPC (C) filled in.
I need to take both workbooks/(worksheets), compare the SKUs, and if a matching SKU is found, extract the UPC from Workbook 2 and fill in the UPC field in Workbook 1, and if no UPC is present in Workbook 2, then it leaves the cell in Workbook 1 blank.
View 2 Replies
View Related
Aug 20, 2014
I have a spreadsheet which is updated daily. Row A of the sheet has the date in it, and every day a new column is created for the that set of data. I have the below code which works at the moment:
[Code] .....
I want to use this same code on another spreadsheet to do the same process (I need to copy and paste 4 columns (A,B,C + D, into E, F, G & H, then tomorrow it will copy E, F, G & H into I, J, K &L etc etc)). The problem I'm having is that A1:C1 is a merged cell, then D isn't (used as a border to separate). So when it is copied I need to select the merged cell columns and column D (i.e. A:C & D on day 1) and paste it into E:H with E1:G1 merged.
View 5 Replies
View Related
Feb 26, 2013
If you open the attached file you'll notice that once clients are entered into the name field of the master worksheet that a new worksheet is created with their name based off a master template. What I need now is a way to create a "on-demand" "click" macro that will allow the user to select a month (Jan-Dec) based on my master tab and autocreate a summary worksheet named that month with each client listed on the Team Roster worksheet in the next available column of the worksheet that was just created.
macro generate a prompt to list the months to allow updates frequently.. so if the same month was run twice it would overwrite the previous.. the woman we're doing this for isn't very excel literate...
NOTE: As you enter names on the Team Roaster sheet it will autocreate tabs.. test file has MrExcel as the worksheet, if deleted the sheet will delete automatically.
View 1 Replies
View Related
Mar 21, 2014
I have a workbook that usually looks something like this
Category Product No description Price
Balloons 12345 Red Disney balloon .50
Balloons 12567 Blue Princess balloon .86
Balloons 76521 Angry Birds Balloon .80
Kites 23456 A Big red Kite .27
Kites 22222 A small blue kite .06
Banners 10000 Party banner .33
etc..
I need to find a way to copy the category below an empty row from column A and paste it in the blank row in column B . If possible to bolden the text but I could probably work that bit out myself. I'm new to this but have used VBA before to run macros.
View 6 Replies
View Related
May 22, 2008
I have been working with a few people on here to setup a macro to copy text from a column of cells to another column and then print this in to a text document but it seams to have got stuck in a loop ....
View 9 Replies
View Related
Mar 7, 2007
I'm trying to write a program for work. One sheet (whereiseverything.xls) will have a list of parts column E and where it is in the process column (k). Column E of this sheet will have multiple part numbers. (Sometimes duplicated.) I would like to figure out how to write a code to Auto filter (whereiseverything.xls) sheet and copy only one P/N from (whereiseverything.xls) column E onto another Workbook Worksheet (Commit status.xls) column. After that the sheet must copy all of the locations of that P/N from whereiseverything.xls column K into and under the P/N of the Commitstatus.xls.
It will continue to autofilter and copy from where is everything, the "one" p/n and all of its locations into another empty column of Commitstatus.xls until it no longer has part numbers to autofilter on whereiseverything. I am extremely green on VBA programming but here is my first attempt.
Windows("Where is everything commits .xls").Activate
Windows("whereiseverything[1].xxx").Activate
Columns("D:D").Select
Selection.AutoFilter
Windows("Where is everything commits .xls").Activate
Windows("whereiseverything[1].xxx").Activate
Selection.AutoFilter Field:=1, Criteria1:="7516113-905" \<--this Is one p/n
Columns("J:J").Select
Selection.Copy....................................
View 2 Replies
View Related
Mar 7, 2008
I have two different Excel reports and the data needs to be copied from each column on one spreadsheet and pasted to the bottom of the equivalent column on the other spreadsheet.
So, is it possible to get a macro that will copy the data from one column then paste it to the next free cell in the column on the other spreadsheet.
If I could get some code to do one column then this should be enough to get me started and I could apply this to the other columns I need to copy.
View 8 Replies
View Related
May 20, 2008
I have a worksheet on which the data is already grouped. At the top of each group is a row that contains only the group name. Since the rest of that row is blank, I want to use a blank cell on that row as a reference, then copy the group name to a newly created column, then fill that column down to the next group.
The goal is to create a column that contains the group name, rather than just having the group name as a " header" at the top of each group.
View 5 Replies
View Related
Nov 22, 2008
i attach the testing2.xls attachment here. from the sheet 1 "original", how to copy from 1 column, column"B" and then paste to column "A" by clicking function "alt + enter" at the same row but different row in the same cell. Output result can refer to the sheet 2 "output".
View 4 Replies
View Related
Feb 27, 2012
I need a code to copy the color of column B and put in the respective cell in Column A. I just need the color to copy from column B to Column A.
View 6 Replies
View Related
Oct 4, 2013
In sheet "diary" I have data in certain rows in column A8:C10000 that contains values if a certain condition is met. I need a vba to copy and past only non blank cells in column D8:F10000. I first wrote a formula with index but it takes too long to caculate.
View 9 Replies
View Related
Aug 21, 2008
I have this code that I have been using fine until today when it just stop working for me... It's a simple copy and paste using VBA Code. The code finds the last row in Column A and copies the cell to L1. Below you will find the code I'm using and the line in yellow is where I'm getting the error.
Private Sub Workbook_Open()
Range("A1").End(xlDown).Select
Selection.Copy
Range("L1").Select
ActiveSheet.Paste
Range("A1").Select
Application.CutCopyMode = False
UserForm.Show
End Sub
This codes runs as soon as the worksheet opens and it has worked for over a year. I'm using MS Excel 2007. Please let me know what you guys think I have tried pretty much everything I can think of but i dont really know what i'm doing when it comes to VBA.
View 6 Replies
View Related
Aug 17, 2006
I have an personnel file with employee info, and I want to create a macro that will look in the "Master" worksheet at the Department column ("I") for anyone in Benefits, and then copy their name from the Name column ("D") into the "Benefits" worksheet. The names should begin pasting in cell "D3" but will recognize if a cell already has a name in it and then paste in the cell below that.
Here is what I have:
Option Explicit
Public Sub RatingbyDept()
Dim Dept As Range
With Sheets("Master")
For Each Dept In .Range("I2:I1000")
With Dept
I keep getting error 92 - "For loop not initialized".
View 8 Replies
View Related
Apr 8, 2008
I have a contiguous multi column, multi row numeric range that I want to copy (and sort in ascending order) into a single column on another sheet in the same workbook. What VBA code could achieve this, or alternatively can this be achieve via formulas?
View 3 Replies
View Related
Aug 21, 2014
I have 2 worksheets, "Data Dump" and "Target List"
I'm trying to cycle through the "Target List" in column "A", find the same value in column "B" in the "Data Dump" sheet. When I find it, I want to copy several other cells from the found row into cells on the "Target List" (though probably to a different column). Here is the code I'm trying to use. How to correct it to get the result I'm looking for.
[Code] ....
View 4 Replies
View Related
Apr 7, 2013
I am able to autofilter the table with a criteria on Column C, but I can't figure out how to mirror the visible cells on column C, on column B. Is that possible to do?
Example
Col A
Col B
Col C
SN0001
1/31/2013
1/15/2013
[Code]...
I want to filter column C to show only February and March dates, and overwrite the corresponding rows in Col B with the same dates in Col C.
This is a simplified version of what I am trying to do. In reality The column B information overwritten periodically, then further updated with information collected from several different sources.
View 4 Replies
View Related
Apr 16, 2013
Code:
Range("a" & Cells.Rows.Count).End(xlUp).Select
Range(Selection, "a1").Select
For Each cell In Selection
If Not IsEmpty(cell.Value) Then
If cell.Value "2012*" Then
cell.Copy
cell.Offset(0, 5).PasteSpecial
End If
End If
Next cell
I have a to copy from column A some cells ( e.g "000005PR RODI T.R, S.L.") and paste it in column F. The problem is that in column A i have as well empty cells and cells that have date (e.g "2012 02 14-OCT-2011 CN 100725") . Neither the IF/AND nor the "double" if constructs are working .
View 3 Replies
View Related
Nov 15, 2013
I want to copy a cell from a column and paste it to next column and up one row. My current data looks like this:
DATA
1234
I want to make it look like: DATA 1234
View 5 Replies
View Related
