I have line of code that should look bat a given range and copy all visible cells to a new sheet, to start at G8. I get the message that this code doesn't perform this for more than one selection and I'm not sure my code is correct for a rnage that covers two lines either.
VB:
Sheets("Error recommendations").Select
' On Error GoTo Errorhandler ...
I have a dataset that is as follows:
Col1 2 3 4 ...... 45
123 456 xxx xxx xxx
100 234 xxx xxx xxx
221 543 xxx xxx xxx
112 234
112 689
122 956
122 234
This goes on from left to right for 45 odd columns.
I need to copy each set i.e set 1 is 123 down to 122 to say cell a25 and then copy the next set i.e. 456 to 234 below the first set.
I need to somehow write a loop code that knows where to get the 2nd, then 3rd set, etc and copy it to the bottom of the preceeding set
I have a spreadsheet of raw data that has been downloaded in Excel. In Column N there are different site numbers.
I want to use a new Sheet for each site. Using a formulae I want to filter the data for each site and then copy the entire row to the relevant site`s page.
So I should end up with a sheet for each page and allthe data sorted correctly?
I am working on an excel spreadsheet that has multiple "sheets" to it. On the first sheet I have multiple columns worth of info and on the second sheet I am trying to copy some of the info from the first sheet.
For example:
Sheet 1, Column A2 has the number 1 in it.
On sheet 2 I have entered the command "=SHEET1A2" and it copies the info as I had hoped.
However, here is where my issue comes into place.
When I sort Column A on sheet 1 numerically, my answer on sheet 2 changes to whatever the new number is in box A2 on sheet 1.
Is there a way I can copy the info so that it changes as I sort the column numerically or alphabetically?
I am looking for a formula that will take data from one page and graph it on another page. The data I am trying to graph is arranged like so:
A B
1 q 2009.05.01
2 w 2009.05.02
3 w 2009.05.01
4 q 2009.05.01
I am looking for something that will look at column A and if the answer is "q" and then look at column B and if the answer is "2009.05.01" Excel will take that and count it in a specific cell on another page. In the case above, I want Excel to give me the answer of "2" in a designated cell.
I have a workbook that has 9 different tabs in it. Once all the information has been completed throughout the workbook, is there a code that could transfer specific data on each page to a different colum on that same page? I need to do this for 9 pages at one time. The information is listed differently on each page. I need to transfer data from the current data column to the previous data column once the entire workbook has been filed out.
View 2 Replies View RelatedI have a table with over 12,000 rows in it. In one column I have activity and the next a name.
A B
Walk John
Run Harry
Sleep John
*blank* Harry
Eat Percy
*blank* John
*blank* Harry
Reading Tom
So *blank is completey blank and that means Harry also put time to sleeping, and again John and Harry both put time to eating. How can I make the blank cells auto populate with the data from the entry above it?
I have a spread sheet where you fill in an order, so customer name, item being purchased, quantity and price. I now need a macro that will copy that info over into an invoice.
If the customer is only buying one item, that would be straight forward, as it could just copy that info across, but if the customer buys two items, the macro needs to see that there is more data to copy, then insert a new row on the invoice and copy the details of the other item.
http://www.excelforum.com/excel-programming/651452-copy-rows-of-data-into-a-different-format.html
Here is the problem:
I have a list of activities (each activity is one row of data). These will be input manually into Sheet2. (see attached file)
The activities then need to be automatically copied and pasted into Sheet1. However, the data is displayed in a different order than in sheet1. So I need some code which will run through a loop for each row of data and then copy and paste it into sheet1 until it reaches an empty row.
The cell positioning of each data set in sheet1 is equally spaced. VLOOKUP will not work for me here as I do not want any formulae or VBA script in sheet1. I cannot change the format of sheet1 as it is a company form.
i have selected cells from workbookA (b2:b8) , i want those selected cells gets pasted in workbookB in a transpose way.
like B1 cell in workbookA pasted into A2 cell in workbookB , B3 cell pasted into D2 , B4 cell pasted into B2 and B5 cell pasted into G2......
i have code but not working
Code:
Private Sub CommandButton1_Click()
Dim STRFILENAME As String
Dim O As Workbook
Windows("Copy of Bill Schedule Form1.xlsm").Activate
Sheets("Sheet1").Activate
ActiveSheet.Range("b2:b8").Select
[Code]....
In column A, I have unit numbers. Column B is blank. I need help copying the unit number in Column A down in Column B until a new unit number appears in column A. For example, in A6 is unit LS2, A12 is unit LS24, A17 is unit LS34. I would like to be able to copy A6 into B6:B11, A12 into B12:B16, and A17 into B17:B22, etc.
I have the code to copy A6 in to B6 and down, but I don't know how to make it stop at A12. Attached is also an example.
i am trying to import an excel document and then copy over some columns to another worksheet from the imported worksheet, using a macro. Everything imports and copies over fine except for one column that has cells that comprise of a list of number separated by commas. When these cells get copied over some of the values retain the commas but some of them (specially when there are a lot values separated by comma) gets changed to this format
From: 1,229,124,012,441,230
To: 1.22912E+15
From: 1044,1048,1052,1053
To: 1.0441E+15
From: 1279,1282,1286,1295,1299
To: 1.27913E+19
From:926,929,938
To: 926929938
I am trying to figure out whats happening here! Is there a max number of letters this column can take and if it exceeds that value, excel converts them to this format? Or is the formatting gets changed to something else while copying and pasting?
I have about a thousand Excel timesheets that all contain 'hours worked' data in a column. Each row contains the area of the project they have worked on and therefore the amount of time they have spent on it. The timesheets also contain the person's name and a w/e date.
I want to sequentially work through each timesheet held locally in a single folder and copy the person's name, w/e date and the hours held in the column into a single new spreadsheet. I need to transpose the data so each amount of time spent on an activity ends up in a column.
I have attempted to record a macro for this but each time I try and run it after the intitial run, it moves to a completely different cell or set of cells to the ones I have directed it and consequently there is no data copied to the new sheet.
I believe this is the first problem..! The second is working through a high number of spreadsheets held in a single locattion but whilst browsing this site I saw the "Excel VBA Loop Through a Folder of Excel Workbooks" page and think this should work fine.
I have created one-dimensional array and now I try to copy the data from array to some specific Cells in worksheet. But it seems impossible all the time!
Sheet2.Cells(56, 3 + m) = LossLocationInt(m)
NB: LossLocationInt(m) is an array containing value in it. But, this doesn't copy to the Sheet2.Cells(56,3+m). For clearness: the array has type variant
I have a spreadsheet that has been given to me by someone else, and unfortunately it has merged cells in it that are causing some trouble. I need to have a way to unmerge the merged cells, but for the data in the merged cell to then be copied into each cell that it splits into.
I've attached two spreadsheets - unfortunately I can't really attach the real one since it has research data in it, so I've reduced the size of the file and replaced some of the text. The first file shows how the file starts off, and the file named "result" shows how I would like it to be.
My real file contains some 10,000+ lines of data, and the merged cells are of varying sizes, with no consistency to the size, so I'd like a way to automate this instead of copy and pasting into every empty cell after I unmerge them.
I have productivity data sheet of employees for a month and want to update in a tracker sheet.Every productivity sheet has 5 columns containing numbers.Since its monthly it would be contain 30-31 rows and.I want to copy this data then go to tracker apply filter with respective employee name and paste it there.Is there a way to do this using vba code?
I have prepared vba code to copy paste individual rows from productivity sheet to tracker.But preparing row by row code makes it way too big.Hence i am looking for another solution.
I've been given the task of automating a spreadsheet to assess whether work has been done by each employee. Every employee has their own spreadsheet, where column A is a job code, and column H contains either y or n dentoting whether they have completed the task (y) or not (n).
The main spreadsheet is designed to show any outstadning tasks across everybody so it has a list of everybodies names in column A and then any incomplete tasks will be listed from columns b onwards next to the appropriate person. Here is what I have done at the moment.
When I view a sheet under Page Break Preview, it shows the Page numbers in the centre of the Page. While I am aware that it would not print the page number I was wondering if there is an option to remove/hide the page numbers.
View 3 Replies View RelatedI am trying to make the cells Iam am copying paste hidden cells with all formats - seems to work fine other than the security part of them, Iam makeing a sheet for work and just trying to make it were it will not get destroyed by other users-
View 12 Replies View RelatedI wish to copy a merged cell (3 cells) based on if only 1 of 3 cells to the right contain "X". if the top cell does not contain "X" than the merged cell is not copied. Also, is therea more elegant to copy 3 columns at a time rather than do one at a time as my code shows:
Sub CopyICUCAPU()
'
' CopyICUCAPU Macro
'
Dim i As Integer
[Code].....
I have a macro that uses subtotals on a dynamic list to generate page breaks by Department. Rows 1:6 of the table are set to print at the top of each page and column A is not set to print at all. Would it be possible to get cell B6 to return the value of the first cell of each page break (from column A) when the page prints. (Column A contains the department names, and though I don't want to print the column itself, I would like the name of each department to appear at the top of the page.)
View 6 Replies View RelatedI have some code that parses an html table. I want to put in error handling in case the format of the page changes or the internet page is unavailable. I am testing without an internet connection and the run time error is not being branched off to the error handler and is fatally ending the macro. This is true also if I raise an error manually.
Private Sub ParseInjuryPage()
On Error Goto ErrorHandl
Dim strPage As String
Dim webIE As SHDocVw.InternetExplorer
Dim myURL As String
Dim tableBeg As Long
Dim tableEnd As Long
Dim RowBeg As Long
Dim rowEnd As Long
Dim cellBeg As Long
Dim cellEnd As Long
Dim strBeg As Long
Dim strEnd As Long
Dim myCell As Range
Dim rowNum As Integer
With Sheets("INJ")
Set myCell = .Range("A2")
.Range("A:F").Value = vbNullString
rowNum = 2
Set webIE = New SHDocVw.InternetExplorer
myURL = "http://www.sportsline.com/nfl/injuries"
webIE.Navigate myURL
Do Until webIE.ReadyState = READYSTATE_COMPLETE
DoEvents
Loop
strPage = webIE.Document.body.innerhtml...................................
I suddenly can't adjust my page breaks in any Excel spreadsheet while in Page Break Preview. Is there some option to turn it on and off?
View 7 Replies View RelatedI have a sheet that changes the number of columns based on data from other sheets. This is the only sheet in the workbook that I will print out every day. I have it set right now to fit all columns on one page, however sometimes this will result in the bottom 1/3rd of the sheet not being used. If I use fit all rows on one page, then some of the columns will get cut off. Is there a way to scale in both directions? My guess is there is not, but I thought I would ask because it would work great for me if I could.
View 4 Replies View RelatedI have a report that I use and right now I have a command button that prints the report x2. What I would like to do is to have it print one in color and one in grayscale. I could do this I think with two different buttons, but I would like to utilize just one. I tried creating a macro but it did not pick up the fact that I changed the properties to black and white.
View 2 Replies View RelatedIs it possible to Change Start Page Of Multi Page UserForm Based on 8 CommandButtons. on a WorkSheet, for example.
CommandButton1
UserForm1.MultiPage1.Value = 0
CommandButton2
UserForm1.MultiPage1.Value = 1
CommandButton3
UserForm1.MultiPage1.Value = 2
CommandButton4
UserForm1.MultiPage1.Value = 3
Could I use 1 multipage UserForm Instead of 8 UserFoms. Is it better to use 1 multipage UserForm with 8 pages or 8 UserForms. I dont know if this make sense or not?
how to get rid of the page numbers that appear when using page break preview mode. The page numbers appear in large grey font in the middle of each page and sometimes makes it difficult to read cells. Can I use this view with all the same functionality without that one feature?
View 3 Replies View RelatedI need a macro that will print a hidden page that is linked to the page I have active.
It needs to be able to find the correct hidden page that corresponds to the active page because there are multilple pairs of the hidden/visible pages. The name of the hidden page is the same as the visible one with "printout" added to the end. When created, the sheet code names are sheetn and sheetm; n and m being consecutive numbers.
The report that I am trying to build relies on DCOUNTA formulas.
This report has 200 lines and 200 columns approximately. Each of these cells would be a DCOUNTA formula. I have a separate sheet, 'Criteria', where I intend to describe all of my criteria for the DCOUNTA formulas.
My problem is that for each DCOUNTA cell in my report, I have to create 2 rows and 5 columns worth of criteria information... so, for 40,000 cells to populate, I need to create a huge sheet of criteria.
So, while I could do the above, and it would take me some time, more efficient and elegant way to spend my time in order to get this report display DCOUNTA formulas?
For more context, I am trying to present information for 100 individual salespeople, monthly and year to date. For each cell, I need to tell DCOUNTA that the date needs to be comprised in the current period (2 columns), what the name of the salespeople is, and what the nature of the information is, which could be more than 2 additional columns.
I can to some degree autofill most of this, with some OFFSET magic, but its still feels like an ugly way to achieve my objective.
I used to make my excel sheets with sports statistics, but now I can't. I was able to get the data for my excel with the option "Get Data From Web Page" in Excel. It was really a simple thing but it was great for me.
But then they changed the website a little. How can I get data from [URL]....