i want to copy data from one excel workbook to other (or ever between diff sheet wud do ) on basis of search on a complete column by picking data one by one from other column & on finding the exact match copy 4 columns form one workbook(or sheet) to other. this has to be done 4 a bulk of data (1000+) so manually is next to impossible.
I have a file with a roughly 20 workbooks. I need to split the data in each workbook into two sheets, rename each sheet, then export the data to template with multiple sheets. After splitting the data into the appropriate sheets in the original workbook, Sheet1 in has only 1 row (plus header) and needs to be transferred to "Project Entry" in the template; Sheet2 can have any number of rows (less than 100) and needs to be transferred to "Activity Entry" in the template. I need to save the template based on the value of cell A1 on "Project Entry" sheet of the template. The organization of the columns in the original workbooks is different than that of the template, so this is not a straight copy and paste operation. The cell formatting in the template must be retained.
I have half of this under wraps. I've cobbled together some code that splits the original data where I need it split, copies it to new sheets and saves the files. I now need to figure out out to get it out of this saved file and into the template.
The crosswalk of values between the original data (Sheet1) and the template(Project Entry) needs to look like the below. So, variable 1 exists in column B of the original and needs to populate column B of the template, and column Q in the original needs to populate column G in the template. The variables and column relationships are different for Sheet2/Activity Entry.
Im trying to copy multiple workbooks and just save it into only one worksheet. I have 2000 diffrent workbooks with the diffrent amount of rows, The ammount of cells is the same and it dosent change.
im working on a excel 2010
This is what i got for the moment..
Sub LoopThroughDirectory() Dim MyFile As String[code].....
I have 25 files with certain worksheets that I need to move to 25 other files.
Worksheet 1, 2, 3 and 4 in Workbook A needs to be moved to Workbook A-2014 Worksheet 1, 2, 3 and 4 in Workbook B needs to be moved to Workbook B-2014 Worksheet 1, 2, 3 and 4 in Workbook C needs to be moved to Workbook C-2014 etc....
Is there a way to do this with a macro? Preferably I would like to do this automaticly - i.e. runing the macro from a master file that
1. Opens Workbook A copies the worksheets 2. Open Workbook A-2014 paste the sheets 3. Save and close Workbook A-2014 4. Close workbook A without saving
I am creating a macro to copy data from one workbook that is emailed to me to another workbook that contains the actual macro, I will be using the second workbook to import the data into an application.
What I need is to be able to copy text in cells say D1, D3, D6 etc located in workbook1 to cells say A1, A2, A3 etc in workbook2 without having the macro go back and forth each time to copy the cells one at a time.
Also is there a macro that will recognize an already open workbook that I can use to copy the data
Look in folder and find workbooks with date in name: Date format is MMDDYYYY Workbooks have multipule sheets
Look at columns in worksheet E and G. If E >=10 and G is "ENABLE" copy A:G and the tab name and paste in the workbook that has this VB code.
What I am going to do is create a workbook with a button on Sheet1 and put your code behind the button that will tackle this great feet that I do manually that takes about 3 days to do.
I have a spreadsheet that has a bunch of codes, I want to search all at once in another spreadsheet. If there there I want to copy the data related to that line into my spreadsheet.
Example:
I want to search a long list of items (in column D) in my “work in progress spreadsheet” The program would look into the “Data base spreadsheet” find the “item to search” in the database spreadsheet and copy the “product code” relative to those items, and populate column C with the product codes.
My work in progress spreadsheet Col C ________________Col D product codes ________Items to search ....................................G28 ....................................G26 ....................................F46 ....................................J34
Database spreadsheet Col C __________________Col E Product codes __________items to search Product code 16345210 ........J34 Product code 14454685 ........G26 Product code 14587541 ........G28 Product code 15754546 ........F46
I am working on a project that requires me to copy columns from multiple workbooks to a main one. I am a new comer to VBA what I could come up with gives me an error. Here's where I am right now:
Code: Sub Import_Click() Dim MainFile As Workbook Dim ComFile As Workbook Dim RDFile As Workbook Dim UTIFile As Workbook MainFile = Dir("C:ModelingProcess FilesMain File.xlsm") ComFile = Dir("C:ModelingProcess FilesModeling - Commercial.xlsx")
I have 194 Workbooks that all contain data on the first sheet only. I need to go into each sheet and pull the information from cell B6 and F21. That information needs to be copied to a new workbook into columns A and B so when I am done I have 194 lines in two columns. Each of the workbooks I am pulling from have the info I need in Sheet1.
Is this possible, or do I need to do a lot of copying and pasting? If it is possible, how do I do it?
I have many excel files(nearly 500 in total and growing daily) in a folder called "Results Data" on my C drive. The file names are slightly different (serial numbers). Each excel file contains data in Cells A2:E11. I want to be able to copy only the Cells A2, B4, D5 and E10 from each workbook and paste them into a new workbook, each copied workbook on a new row.
I have been trying to change code that I have found on the web but nothing seems to be working,
I have a series of workbooks residing in different directories which I am trying to copy into a summary workbook. At present what I did is to open the summary workbook and the individual workbook one by one and copy into the summary workbook by first right clicking of the individual workbook's name tab and select copy to copy onto the summary workbook as a new worksheet. I have about 20 individual workbook to copy and this always take a bit of time every week.
To be a bit clearer, the workbooks are in the following directories and the workbook name and sheet name are shown below. For simplicity sake I will only list 3 of them.
1. D:ContractINF00012301.xls the tab name is 2301 2. D:ContractINF0022403.xls the tab name is 2402 3. D:ContractINF00038400.xls the tab name is 8400
I have a few hundred workbooks that I am merging into a single file. I found the following vba code that performed this task very well.
Sub simpleXlsMerger() Dim bookList As Workbook Dim mergeObj As Object, dirObj As Object, filesObj As Object, everyObj As Object[code]....
After I merged the data, I realized that I needed to know the source file that each row of information comes from.
How can I modify the above script to copy the filename and add it as an additional column of information when each sheet is copied into the master file?
For Example: Currently If I have 3 files: File 1: 1 2 3 4 5 6 File 2: a b c d e f File 3: v w x y a b
Running what I currently have will give me: 1 2 3 4 5 6 a b c d e f v w x y a b
I have a spreadsheet that requires data from different workbooks.But the names of the workbooks are to be received as user input and used dynamically to copy data from that workbook to original workbook.
To make it easier,let me use this example.
I have a workbook named original.xls.It has a command button or any other control.When i click that control it will ask for a workbook name of the project which is in the second column of the "original.xls" workbook.As soon as i enter the workbook name it will copy data from that workbook to the rest of the columns in my "original.xls" workbook.Then it has to ask to ask for second workbook name and do the same procedure till it encounters a blank row.
I am trying to copy and paste between workbooks that are defined in an array. However, I get an out of range error when the code first reaches the line Workbooks(Wkbk(WkbkNum)).Activate.
Sub Gather_Risks()
Dim MasterRow As Integer ' Declares row number in Master Worksheet Dim RowNum As Integer ' Declares row number in active array worksheet Dim Wkbk(13) As String
1. I have a large number of Test Suites that are large documents with 1 (visible) sheet w/ test cases, and 1 (hidden) sheet w/ validations. Test Suite is saved with a unique name (that follows a naming convention we've set up on this project: <Project>_<Test Suite Category>_<Location in Software>_< date>.xls
2. I need to create a master document in which i can run a macro that will copy each "test suite" sheet from each of these documents, insert it into the master doc, and sort the sheets by name. then it needs to present the data from all of the sheets on the main page of the doc, and break down the results by Test Suite Category, and Location.
Is this possible?
Can I create a macro that will import sheets from (potentially) hundreds of different workbooks, and then sort them appropriately?
I've been looking all over the place, and while i've seen macros that can import specific data, rows, or columns, i havn't quite seen what i'm looking for.
I've got a variable row length list of data, 24 columns wide with column headers in row 7 and file descriptions on the above rows, that I need to split up into seperate Workbooks dependant upon values in the last column, all rows with the same value in column X form the same new Workbook, which I can then SaveAs with a name associated with the value. I've seen a similar thing done to sheets on the forums by using the Advance Filter and I would adapt that to copy each created worksheet to a new workbook, but a) this seems inefficient and b) my unique values are too long to name sheets from.
For work I have to create copies of the same workbook for every day of the month. I have got the following to do it properly, which may not be the best way so I am open to suggestions, but I don't want it to save this macro in every workbook. There are however other macros that I do want it to take with it, just not this one.
Sub SaveByDate() Dim a As Integer, b As Integer, c As Integer
' number of days in month + 1 (this is just a test; for Jan a = 32) a = 6
' start date b = 1
c = 0 For c = 1 To a If c < a Then
MyMonth = "Jan" MyDay = b MyFileName = MyMonth & " " & MyDay & " 2008 daily report" ActiveWorkbook.SaveAs Filename:=MyFileName b = c + 1 End If Next c End Sub
How to copy a formula (16 columns) from a workbook to another, without referencing the source workbook.
Some people are using tricks such as replacing the equal sign "=" for another character such as "^" then using replace all to put the equal sign back again... but this is too much trouble.
I need to copy a range of cells from various columns/rows from 1 sheet into 6 other sheets, but into a specfic range of cells(in the same workbook). I am looking for a code which would copy the cells, then allow me to save the sheets it has copied them to as seperate workbooks without loosing the values it copied. I would also like to make amendments to the cells which have been copied onto the other sheets, without having an error message if I type anything into the cells, also having any blank cells left blank rather than placing the 'o' value in the cell.
I have 12 worksheets, 1 for each month. The first worksheet is filled out with all the coreect formulas and is in the correct layout. How do I copy the first worksheet to the rest of the worsheets exactly so that all the formulas, cell arrangement and the page setup is correct?
I know how to highlight, copy and paste but this does not seem to transfer everything.
For example, I have 50 clients. In 1 workbook, I have a sheet for each client. When I'm finished with a particular client, I need their one sheet to place in their file and be done with it.
The current process is to open that 1 global workbook, copy and paste the sheet I need into a new workbook and go from there.
I was wondering if there is a simpler way to achieve this with VBA coding?
Ideally, I would like to click an object button and then be prompted to select a worksheet from a list that contains all current non-hidden worksheets.
Once I select a worksheet, I would then be prompted to save as and select a file path. That would save that specific client worksheet in its own file that I selected.
I have several workbooks (around 15) in one folder which all contain the same worksheets but with different data. The worksheets all have the same columns. What I would like is a way to consolidate each of the worksheets of the workbooks into one new workbook by running the code whenever I want it.
In other words I have workbook 1 till 9 which all have worksheet 1 till 3. And I would like to consolidate them into a new workbook with sheet 1 till showing all of the data.
I have a master tracking document that I use to record project information. My client sends me an updated schedule each week which may (or may not) have additional stores on it and some of the details of the stores may have changed.
I need a macro to capture these changes from the source spreadsheet (the one the client sends) and update the master tracker. The master tracker has a lot of additional columns of data that I add in myself about each project so I don't want to lose this information. The macro needs to see if the store on the source sheet is already on the master tracker and if it is then it needs to check to see if any of the columns below have changed.
If the store isn't on the master tracker then it needs to be added. There are around 750 stores on the master tracker at the moment so to do it manually takes forever!
Master Spreadsheet
Column A - Retail Region Column B - Project Name Column C - Postcode Column D - Net Selling Area Column E - Project Manager Column F - Contractor Column I - Start On Site Column J - Launch Date
Source Spreadsheet
Column C - Retail Region Column D - Project Name Column I - Postcode Column J - Net Selling Area Column M - Project Manager Column N - Contractor Column P - Start On Site Column Q - Launch Date
I have three workbooks stored in the same drive(shared drive). Let's call them 1.xls, 2.xls and 3.xls. Each workbook has one sheet.Column A in all sheets is the same. I want to make the following linking:
-Column A of the sheets in 2.xls and 3.xls to be linked and get data from column A of the sheet in 1.xls. -Column B of 1.xls to be linked and get data from column B of 2.xls and column C of 1.xls to be linked to column B of 3.xls.
So far it sounds easy. What I cannot find is what to do when I insert a row in the sheet in 1.xls and write something in column A. I managed from DATA- IMPORT EXTERNAL DATA to refresh column A of the sheets in 2.xls and 3.xls, so that these columns contain the updated information. I cannot do the vice-versa procedure: for example, to insert something in column B of the sheet in 2.xls and refresh the values of column B of the sheet in 1.xls. The fact is that when I insert a row in 1.xls the right references get lost and move one cell up. I want the references to remain stable. In a way the sheets are interdependent.
I have created a macro which unhides a sheet (Email) in one book and takes that info to #1 create an email and #2 open a new file and paste data into it.
Problem is, I want to go back to the first book and hide the sheet (Email) since other users will be using the macro. I keep getting a run time error 9 'Subscript out of range'.
I have my code below. I have commented out the last few lines that used to work before I had to open a new book first.
I have an Excel file that contains formulas that reference external workbooks on a shared network. Each month, I copy the column of formulas over to the next month's column. Then, to update the file path, I highlight the new column and do a Find-and-Replace, swapping the previous month's name for the current month. This practice works fine. The only thing is ... the "Open File" promptbox appears for each formula where I updated the file path (i.e. and this can be hundreds instances!). I wind-up having to choose the file from the exact same file path. It is an unnecessary, and annoying extra step to take.
I have 2 worksheets. The first worksheet contaions raw data. On the second worksheet I am pasting certain data from the first worksheet. Everything copies except the data in column BI. This column has blanks as well as numbers. I need the column copied as is. The range should equal the number of entries in column A. Why am I getting the error, and Is there an easier way than what I'm using?
I have a master spread sheet that contains many products which are then grouped into system. Typically, three or four products make up a system but it can be as few as 1 or as many as 6.
The master spread sheet contains all the products. But I would like to be able to create new worksheets where the new worksheet would only contain the tabs of the system.
All the tabs are named as follows: Product #, then system name: Here are examples: (all of the product names will contain the same amount of characters, but the system names will vary in the amount of characters necessary).
Thus, I would want the first 3 in a Worksheet, then Next two in a worksheet, and so on. A bonus would be if the worksheets were all saved with the System name, i.e. batter, breader, predust.
