I have a master spread sheet that contains many products which are then grouped into system. Typically, three or four products make up a system but it can be as few as 1 or as many as 6.
The master spread sheet contains all the products. But I would like to be able to create new worksheets where the new worksheet would only contain the tabs of the system.
All the tabs are named as follows: Product #, then system name: Here are examples: (all of the product names will contain the same amount of characters, but the system names will vary in the amount of characters necessary).
Thus, I would want the first 3 in a Worksheet, then Next two in a worksheet, and so on. A bonus would be if the worksheets were all saved with the System name, i.e. batter, breader, predust.
I've created a simple "app" within excel (It's a suggestion box), something that has a form on one sheet, and stores the data entered on it on a second, locked and hidden sheet. This way people I work with can open the form from the shared drive, fill in their suggestions, then close it. I can then view them on the second sheet.
For aesthetics, one of the cells is merged across 3. Most of the other cells don't need to be so wide, but this one does.
One of the users has mentioned that they can't copy the text from that cell without getting a [Tab][Tab][Linebreak]. The line break, I'm assuming, is because it's the end of a cell. I'm assuming the tabs are because it's merged across 3 cells.
Can this be corrected and the tabs be removed? I don't see a Worksheet_BeforeCopy method.
1) left click on tab 2) move or copy... 3) move selected sheets to book (File: Region 1.xls) 4) then go on to next tab...............
Now, this does loop through the requested files, I can see them open, then close. I'm guessing they are copying, but I take it that I need to have it paste, then go to the next? (The c:files is just generic, as the files are on our LAN, and I'm just paranoid. The "Erie St. Clair" are the actual names of the file, and the tabs).
I mean renaming tabs on the sheets, the tabs at the moment are called Output 1 (*****) instead of Sheet 1 etc.. and i would like that changed to contents in cell A9. If possible only the Output 1 will be removed and it will change to something similar "X-Ray (5E4TT)"
i have a workbook with worksheets named Output 1 (*****)
(the stars being a five digit/letter code - the only thing that changes on the workbook)
now the problem is, i pull of reports and sometimes worksheets can be up to one hundred.. now in cell a9 is the name of the report. I have found vba code to rename sheets to cell contents **extract below**
but any chance of renaming contents of cell a9 to a worksheet named Output 1 (*****) etc.. and if the contents of cell a9 can be trimmed so only certain part of a lengthy title
Sub RenameTabs()
For i = 1 To Sheets.Count If Worksheets(i).Range("A1").Value <> "" Then Sheets(i).Name = Worksheets(i).Range("A1").Value End If Next
How do you get a quick report of all of the worksheets in a given file?
Is there functionality in Excel that would provide this? Or a simple macro?
I inherited a file w/ approx. 50 tabs and I'd like to print out the list of all the worksheets so I can create a checklist of tasks I need to do for each worksheet.
I have about 30 Excel files, each with multiple tabs. Each file has a tab called "Invoice." I would like to create one workbook with all 30 Invoice tabs. As of not I am manually copying and pasting, which takes a while. There has to be an easier way, and I found this VB script to combine entire workbooks.
Is there any way I can run this and get just that Invoice tab and not all tabs on all files?
Sub GetSheets() Path = "C:UsersdtDesktopdt kte" Filename = Dir(Path & "*.xls") Do While Filename <> "" Workbooks.Open Filename:=Path & Filename, ReadOnly:=True For Each Sheet In ActiveWorkbook.Sheets Sheet.Copy After:=ThisWorkbook.Sheets(1) Next Sheet Workbooks(Filename).Close Filename = Dir() Loop End Sub
Basically I inherited a Excel Workbook which has 128 different tabs, unsurprising this is almost impossible to manage.
My requirement is to merge all of the 128 tabs into 1 tab 'Sheet1'. The macro should keep going even if there are blanks, it should move onto the next tab only when there are over 10 consecutive blanks in Column B.
I have tried searching the forum but nothing seems to cater for the specifics of this case. I would really appreciate some help. I mean really, i am in a mad panic thinking i will have to do 128 tabs manually otherwise.
I have several tabs, 100 or so, and would like to have cost per West, South region etc onto a summary sheet. The summary must separate these costs per individual company per tab/worksheet. I'm looking for a formula, a macro or both to execute this work for me. The tab list grows every time i.e. new ones are set up all the time so the formula has to take this into consideration.
If ActiveWorkbook.Sheets.Count < 17 Then Application.CommandBars("Workbook tabs").ShowPopup Else Application.CommandBars("Workbook tabs").Controls("more Sheets...").Execute End If
The code doesn't do anything on my excel workbook which currently has like 20 workbooks, and it grows daily by like 4 or 5 worksheets.
I have 12 worksheets, 1 for each month. The first worksheet is filled out with all the coreect formulas and is in the correct layout. How do I copy the first worksheet to the rest of the worsheets exactly so that all the formulas, cell arrangement and the page setup is correct?
I know how to highlight, copy and paste but this does not seem to transfer everything.
I have 2 worksheets. The first worksheet contaions raw data. On the second worksheet I am pasting certain data from the first worksheet. Everything copies except the data in column BI. This column has blanks as well as numbers. I need the column copied as is. The range should equal the number of entries in column A. Why am I getting the error, and Is there an easier way than what I'm using?
I have a project that has a variable number of worksheets, dependant on the number of models in the job. These worksheets usually only use a single page, but may use two pages if the model is large (not often the case though). I have a "Template1" worksheet that is copied as a whole, to equal the number of models.
To minimize the file size that is generated when copying out the "Template1" worksheet, I have put the template of the second page on a separate worksheet "Template2". Now the initial copy is only of a single page, and the second page is only copied into the new worksheet if needed.
Sub AddPg2() Dim CrntPg As String CrntPg = ThisWorkbook.ActiveSheet. Name Application. ScreenUpdating = False ThisWorkbook.Worksheets("Template2").Visible = True Worksheets("Template2").Activate ActiveSheet.Range("A47:T96").Select Selection.Copy Worksheets(CrntPg).Activate ActiveSheet.Range("A47").Select ActiveSheet.Paste ActiveSheet.Range("D58").Select ThisWorkbook.Worksheets("Template2").Visible = False Application.ScreenUpdating = True End Sub
If I do this process manually, I toggle DesignMode "on", and it works, but I if I record the process, toggling DesignMode does not show in the code. how to include the comboboxes and checkboxes in the copy/paste process.
I would to ask how do I match the values in Sheet1 and Sheet2. As you can see in the attached example, I need to get first in Sheet3 if there is a certain individual in Sheet2 from Sheet1. After that, I need now to fill out the remaining columns in Sheet3 to match values for the corresponding names.
I'm getting reports in an Excel file with more then 30 worksheets. All of them have the same structure. I would like to add them all in one single sheet and to place the source "sheet name" in the last column. All sheets have 12 columns with different number of rows (between 1 and 100). First row in each sheet is the header of the table.
I have a report that I need to divide data onto different sheets based on a value in a particular column, and am working with 3 sheets.
Sheet1 is the entire database of information Sheet2 is the entire row of data from Sheet1 where column3 value on Sheet1 is "SC" Sheet3 is the entire row of data from Sheet1 where column3 value on Sheet1 is "TC"
Sheet1 has 15 columns, and the number of rows vary (up to 2000). The loop would end if there are consecutive blank fields in column 1 of any of the rows, as there is not always data in column 3.
What I'd like to do is to have the block of rows starting from "Agent:" and ending with "Total" copied into a separate worksheet and then have the worksheet named using the agent's name. I have highlighted the data in yellow in the attached reference file. I would like to have this done for all 58 agents. I could copy and paste manually but that wouldn't be the smartest way to go about this. I figure I probably need a looping structure for this but I am not yet proficient enough to figure this out quickly. I am supposed to have this done today.
Edit: The last part of this would be to have blocks of rows from the "sections" worksheet which use identical agent names also pasted below the data from the "questions" worksheet. I have attached the workbook I am working on now cutting and pasting manually.
I need to open each workbook, copy Sheet1, paste to next available Sheet# in Combined.xls, close the workbook and move to the next workbook.
I have the code for copying a specific sheet from one workbook to a new workbook. But I do not have the code which would perform the above mentioned task for me and I don't have any idea for how am I going to do this without your help
I have used the Search option to find out if this question had already been answered but I could not find a solution for this specific request
I am trying to copy data from one worksheet to another.The problem is that it doesnt copy zeros across eg. for value 00125, it will copy only 125. Can anybody tell me how to pick zeros as well. Also at the moment i have added code to match just one column. How can i attach another criteria to match for 2 column value?
Set xlRng = xlSheet.Range("A13:A44")
Set rngFound = xlRng.Cells.Find(what:=ActiveSheet.Cells(rwNumber, 1).Value, LookIn:=xlValues, lookat:=xlWhole)
My macro does some calculations for a worksheet. I need the macro to loop through all the worksheets regardless of how many worksheets there are. My first sheet is a summary page with the names of the subsequent sheets that the macro needs to do calculation on. I need the macro to recognize the worksheet names in the summary page and run for each worksheet name. For instance the next time I run the macro I may have fewer sheets of more sheet names in the column. It sounds almost like an Indirect function problem.
I have a file with four worksheets. The first is the master sheet. The other three sheets we can call "SheetB" "SheetC" and "SheetD." The actual names are quite long. Column T of the master sheet (except for the header row) contains dates formatted as text in YYYYMM format. I need a macro that will copy the rows to the other three sheets based on these criteria:
SheetB - dates April 2010 or before SheetC - dates May 2010 to April 2011 SheetD - dates May 2011 and beyond
i have 2 worksheets. Worksheet A has 100 rows on it with information in the first column. However, there are many blank rows e.g
Column A 1 2 matt 3 4 simon 5 paul 6 7 8 mike 9 10 11 12 john
what i need to do is transfer this to worksheet B without copying accross the blank cells, Now the main problem is i want the cells to be linked so i need a formula that finds the next cell with data in it to go in the next cell down. So worksheet B will look like this:-
In my attached example you can see I have Sheet "Computer" & Sheet "RHN" both have a number of columns, but all I want is to compare Column A of "Computer" with Column A of "RHN" and copy all entires found in A "Computer" and not found in A "RHN" to a new sheet!
I am trying to optimize my code below. It works but it is soo slow, it seems to slow down on the array copy and paste special areas. I believe this is because its doing a cell to cell paste method. These sheets have data as well as graphs that i want to retain on the new sheet, but i could select ranges for each each if that would speed up this procedure.
Code:
Sub CreateDataSheet() Dim ws As Worksheet Dim sDataOutputName As String With Application .Cursor = xlWait .StatusBar = "Saving DataSheet..." .ScreenUpdating = False
I have built a template worksheet from which I have developed a macro to copy and rename a new worksheet for each month. When the macro executes, it duplicates the macro buttons on the sheet. That is it copies the original macro buttons over (good) then adds "new" buttons in the same locations. The original macro button have been labelled with their function (eg Copy and Paste).The new buttons continue to go up in sequential order e.g. Button 71, Button 72... How do I remove these additional "new" buttons without deleting all of the buttons on the sheet?