Count 0 And Negitive Numbers Since Last Positive Number From Right To Left
Apr 28, 2014
I have attached an example. Basically I had this set up to calculate the row and give the answer at the end. But now I cant see the results without scrolling, so I want to move the answer fields to the C column and add new data into the D column while keeping all the data in the formula.
count 0 and negitive number cells since last positive number from right to left.xls‎
to create with the default excel functions the following calculator. I need to calculate the maximum number of positive numbers which happen in a row and the maximum number of consecutive negative numbers. For example in the following list of numbers there are a maximum of 7 consecutive positive and a maximum of 6 consecutive negative numbers:
I'm trying to count the number of times a payment is made within a certain set of dates. I believe that I should be using a countifs function, but I'm not exactly sure how to program it. I have a number of months, say the last 12. And in each month a payment is made or it isn't made.
I have a column of variances, these contain both negative numbers and positive numbers. I want to gather a sum of all the negative numbers and positive numbers separtely. Basically saying all the positive overeages = this amount And all the negative shortages = this amount. you can see the attached sample.
I'm trying to count the number of numbers within a given range.
Example Row Y has cells that contain a series of numbers 1,5,9,12,23. No cell in the range should have the same individual number more than once. At the end of row Y I want to know how many numbers, not the total of the numbers are within that range.
Y 1 1,3,5 2 21,32,44 3 12,19,31 .. 40 2,4,18 41 total number of numbers in range Y1:Y40 - 12
I am trying to work out how to count the number of cuts that might be made in a length of pipe, dependent on the length of the source material and the cut lengths required. This is so I know how much to charge for the activity.
So for example, the source material is 3600mm in length, I need 3 lengths of say 1100mm which gives me waste of 300mm (that doesn't matter) but I need to be able to calculate the number of cuts made (in this case 3) for any variation of the cut lengths. The 3600 only varies from time to time but the cut lengths change all the time.
I have a cell content to interogate in vba, the format of the cell is that it has a set of numbers. There are 3 posible scenarios. 1 There is no number at all 2 There is just one number 3 There could be theoraticaly as many as 24 numbers separated by a space eg 2 4 12 .
I would like to count the number of these numbers and and express it as a variable. The numbers will always be unique by that I mean there will not be 2 same numbers in the one cell. I tried looking for the solution but I had no success.
For the example above TheFinalTotal = 3
Also Im trying to strip a date in a format 02/12/2006 into just 02122006. I know that this is possible but I just bomed out trying to find this as well.
What I am trying to is to count the number of times a certain number or character appears (either on its own or in a batch of consecutive cells containing that number/character) in a column.An example might clarify things (for reasons of brevity I will write the columns in rows):
If a column looks like (each 1-digit numbers / characters being a consecutive cell) 0 0 X X 0 0 X and I am counting for X, then I should get 2. If my column is X X 0 X X 0 X 0 0, then I should get 3. If my column is 0 X X 0 0 X 0 then I should get 2. If my column is X X 0 X X 0 X then I should get 3. Is there a formula to perform that calculation?
I have a 52 (one for each week) page workbook. I am trying to average cell J9 for the entire 52 pages. However the information is not added to the cell until the end of the week so week 30-52 all have 0s and should not be counted in the dividing number. Is there a way to have Excel count the number of cells that have a number (not 0) and divide the sum of the cells but that number.
=(WK1!J9+.....WK52!J9) / (counted number of cells not = 0)
I am looking to count group numbers that are bound to a nomenclature number. So I have made an example below. The nomenclature number is bound to 1. So I want to count all the 1's that are bound to 0912, which would be 5. and the same goes for 1234. the 2 is bound to the nomenclature 1234, so i want to count all the 2's that are bound to 1234. Which would be 3.
I have data starting in E7. I want it to go down the column and find the negative numbers. If it finds one then I want it to change the number in the row to the left of it to a negative. So if E67 is a negative number, make D67 a negative and so forth down the line Sounds "simple" but how do I do it?
I go negative in one column I want it to show up in the next column as a positive number because when I add my income and subtract my bills and the negative from last month to get the what cash I'll have left it screws up because negative subtract a negative is a positive. So how do i get the sum of say B9 to from -$5.00 to +$5.00 into C4 so when i subtract C4 From my income it wont add to it.
How do I do summation of only positive amounts for a particular month, given that the column A is dates ranging from April to Sept while the amount column has postive and negative amounts.
For example
Column A Column B Date Amount 1 9-Apr-09 10,000.00 2 9-Apr-09 (8,000.00) 3 30-Apr-09 153,000.00 4 12-Apr-09 (3,000.00) 5 15-May-09 20,000.00 6 14-Jun-09 (5,000.00) 7 20-May-09 (6,000.00)
I would like to see that I am continually saving on a per-day basis (as well as overtime). I allowance myself an allowance each day, but some days, I need to spend more money than that. The best solution I have to is keep a running total for myself, so that each day is affected by the preceding days. Therefore, if I spend too much, I now have a small defecit that needs to be corrected. This method keep me on track as far as saving and spending.
Question (and I copied the actual data from my spreadsheet):
Without having to manual enter the final calculations (because this is just a simple part of an overall larger, more complex spreadsheet), can I generate the values in my Value Change row, based on the information from my Running Total row?
For example, Day 1 to Day 2, I was able to incease my running total from 233 to 354 (meaning that I had saved +121 that day). Of course, this is an easy subtraction problem (Day 2 - Day 1 = Value Change). From Day 2 to Day 3, I spent way too much. The running total fell to -1198, meaning that I spent 1552 too much (that day's value change is -1552). Again, this an easy subtraction (Day 3 - Day 2 = Value Change, just like the first example). From Day 3 to Day 4, I was able to reduce my running total -1063, meaning that I was able to save 135 that day. This is my problem. Day 4 - Day 3 does not equal the value change of + 135. To get this value, the preceding formula now has to change to ABS(Day 3) - ABS(Day 4).
This is the issue. I need a formula that can work normally when the numbers are postive or when the second value is larger (in terms of absolute value). On the other hand, it needs to recognize the special cases like Day 3 - Day 4. Is this some form of a conditional function?
Running Total 233354-1198-1063-878-658-933-807-657 Percentage Change51.93%-438.42%11.27%17.40%25.06%-41.79%13.50%18.59% Value Change121-1552135185220-275126150
I'm looking for a formula that would add only positive numbers located in the same row and in 5 different cells. These cells may contain negative numbers at times. The total after adding the 5 cells are to be displayed in a different worksheet.
I want to find the min and max numbers within a thread of numbers that has both positive and negative values. The key is that I want the smallest amount or the largest amount based on the number and not on the positive or negative.
For example, below is my list of numbers.
7 5 2 -5 -6 7 -8 -3
I want the min formula to return 2 and the max formula to return 8.
************************************************************************>Microsoft Excel - Book2.xls___Running: 11.0 : OS = Windows XP (F)ile (E)dit (V)iew (I)nsert (O)ptions (T)ools (D)ata (W)indow (H)elp (A)boutB2B3B4B5B6B7B8B9B10B11B12B13B14B15B16B17B18B19B20B21B22B23B24B25B26B27B28B29=ABCD1 amount Abs amtMark x when paried up 2 (43,746.73)43746.73x 3 43,746.73 43746.73x 4 43,746.73 43746.73 5 (60,579.30)60579.3 6 (60,579.30)60579.3x 7 60,579.30 60579.3x 8 (98,416.85)98416.85x 9 98,416.85 98416.85x 10 98,416.85 98416.85 11 (500,000.00)500000 12 (500,000.00)500000 13 (500,000.00)500000 14 (500,000.00)500000x 15 500,000.00 500000x 16 (700,000.00)700000 17 (700,000.00)700000 18 (700,000.00)700000x 19 (700,000.00)700000x 20 (700,000.00)700000x 21 (700,000.00)700000x 22 (700,000.00)700000x 23 (700,000.00)700000x 24 700,000.00 700000x 25 700,000.00 700000x 26 700,000.00 700000x 27 700,000.00 700000x 28 700,000.00 700000x 29 700,000.00 700000x Sheet1 [HtmlMaker 2.42] To see the formula in the cells just click on the cells hyperlink or click the Name boxPLEASE DO NOT QUOTE THIS TABLE IMAGE ON SAME PAGE! OTHEWISE, ERROR OF JavaScript OCCUR.
****** http-equiv="Content-Type" content="text/html; charset=utf-8">****** name="ProgId" content="Word.Document">****** name="Generator" content="Microsoft Word 11">****** name="Originator" content="Microsoft Word 11"> Hi everyone,
I can't figure out how to mark a "x" for the paired up figures in column A as shown in the above spreadsheet using a formula(e) and/or VBA. At the moment I'm doing this manually. Imagine doing this for thousands of line... once a week
If you have a formula lets say ( sum A1-A2) and the total is negative i.e. A1 is 100, A2 is 50 would return -50, how do you get the value to show a plus sign if the value is positive? i.e. if A2 is 100 and A1 is 50, excel would simply show 50, but I'd like it to show +50. Also, if the result is 0, so both A1 and A2 are 50, how do I get Excel to display the words On Forecast in a cell?