I'm attempting to summarise several hundred control charts.
One thing I'd like to do is be able to put in a formula to count the maximum number of successive entries that are all the same side of the mean.
Another related thing is to be able to count the longest run where successive values are the same.
I am trying to figure out how to create a formula or VBA to count how many contiguous 0's there are in a specific row...and then drag this formula down many rows..for example - if a row of data contains 1,3,0,0,0,4,5,0,0,0,0,0,0,0,5,3,1,0 I want the result to be 7, because 7 is the longest streak of contiguous 0's.
View 9 Replies View RelatedHow can I get the Longest sequence of 3's. E.g.
CA
1
2
3
5
3
3
5
4
How I can show the longest string in a column, I've tried to find a formula that does this but it only shows the number of characters, not the actual string contents.
View 2 Replies View RelatedI have a list of dates in column A (sequential from low to high).
I have corresponding rainfall data in column S.
I am trying to find the longest run of 0's in the rainfall data and return the start and end dates. It would be great if i could tell it (in cell C8) to find the longest run below this number.
ie: i say i want to find the longest run of numbers below 5.
I am looking for a formula that returns the date of the first and last value in the longest continued range.
In the example:
CD30CLA3101/02/200833201/03/20086
3301/04/200853401/05/20083501/06/200863601/07/200823701/08/2008
The two formula should return the two dates in blue.
I had asked about automatically naming regions and this is an extension of that post because it's closed. The code we ended up with to name the region is:
Dim sNm As String, sRT As String
If Intersect(Target, Rows(1)) Is Nothing Then Exit Sub '------------------->
If Target.Count > 1 Then Exit Sub '---------------------------------------->
sNm = Replace(Trim(Target), " ", "_")
sRT = "=offset(" _
& Target.Address _
& ", 1, 0, counta(" _
& Cells(2, Target.Column).Resize(Rows.Count - Target.Row).Address & ") )"
ThisWorkbook.Names.Add Name:=sNm, RefersTo:=sRT
My problem now is that I need to have the regions be the length of the longest column. I've tried using a few different ways using the worksheet range but I can't seem to get it to work.
I'm looking for a formula which returns the longest consecutive series of occurrences of 2 chars in a text string.
In the case I'm trying to count the longest consecutive number of nine-spares (9/) in a bowling game.
For example:
|7/|X|9/|9/|9-|9/|9/|9/|9/|X8/|longest series of 9/ would be 4.
|9/|9-|9/|9/|7/|9-|(8)/|X|7/|9-|longest series of 9/ would be 2.
|9/|(8)1|X|X|72|63|7/|8/|8/|9/9|longest series of 9/ would be 1.
I have a database application which appends an "A" to the sequence number each time an entry is amended and then posts it as a new row in the database. This means there can be multiple entries with the same number but with different amount of "A"'s afterwards.
e.g.
Cell A6 contains seq no 1
Cell A7 contains seq no 2 - Seq no 1 is subsequently amended so...
Cell A8 contains seq no 1A - 1A is subsequently amended so...
Cell A9 contains seq no 1AA - and so on and so forth..........
What i am trying to achieve is a formula which will look at the record number which is required (i.e. 1) and will search for record 1 with the most number of "A"'s appended. This way the user will only be amending the most up to date record.
The formula i have tried (but doesn't work) is:
=INDEX(A6:A65536,MATCH(B2&MAX(LEN(A6:A65536)),A6:A65536,1),0)
(B2 is the record the user wants to amend)
I am trying to do the following with VBA.
What i need is to find out the last cell with data and then selecting the whole range and copying it.
Please see the below.
As you can see, the column with the "longest" data range is B9,C9,D9,E9.
I need a VBA code to detect which Column has the longest Data and from there copy the entire range.
Hence, in this case, the range to be copied is From A2:J9.
Column A
Column B
Column C
Column D
Column E
Column F
Column G
Column H
Column I
Column J
1
2
ttt
rrr
m
vvv
gg
ff
fff
fff
fff
[Code] ..........
Hence,in this case, the range to be copied is From A2 to J14.
Column A
Column B
Column C
Column D
Column E
Column F
Column G
Column H
Column I
Column J
1
2
hjhjh
ghj
gh
ghj
ghj
ghj
[Code] ..........
I have the data as follows in each cell a number:
1 5 6 23 45 2
6 23 45 5 1 22
9 10 11 1 36 5
I have this kind of data going down about 2000 rows. I want to find how many times 1 and 5 appear in each row until there is no more data to read. I found the formula below but I cant use it for 2000 lines plus any extra that will appear in the future...
I have a field that contains the following: 012100002030
I need a formula that will tell me whether or not the string contains a number higher than 2 or whether or not it contains more than one 2.
Examples:
001000002011
111111000022
401110000000
the first loan would not meet the criteria as it contains no number higher than 2 and only contains one 2.
the second loan would meet the criteria as it contains two 2's.
the 3rd loan would meet the criteria as it contains a number higher than 2.
the 'Odd-Even' count in the attached worksheet? I want to do away with columns 'K' to 'P' but still keep the odd-even count in columns 'H' & 'I'. I can get it work so far but I would really like to have it so that columns 'K' to 'P' are not visible. I know you could hide those columns, but is there a better way to do this? Also I would like to keep the Odd-Even counts for the blank lines blank until you add data to them.
View 4 Replies View RelatedI am trying to use a countif formula to calculate how many cells are above 95% from a given row.. However, some of the cells in the row has numerical values and not percentage. How can I modify the formula to calculate how many cells are above 95% from the whole row? Example as below:
A B C D
94.8% 4.25 3.25 96.5%
Based on the above, I used a countif formula to calculate how many cells are above 95% but the solution was wrong.
I have a column of numbers of approx 3000 rows and the number is either a 0 or 1 and they are in a random order in each row. I would like to count the number of 0 in the column. If there is consecutive 0 (a block of 0), I would still need to count it as a single occurrence.
For example, the count (or sum) for the number of occurrences for the number 0 in the below would be 4.
0
1
1
0
I have a daily column of numbers of approx 600 rows and the number is either a 0 or 1 and the 0 or 1 are in a random order in each row like:
1
1
1
0
1
0
0
0
1
0
0
1
I would like to find the min number of rows with 1, the max number of rows with 1, the totals of consecutive rows with 1 ie 3 consecutive rows of 1 appear 4 times, 4 consecutive rows appear 6 times etc and the average of the consecutive rows with 1.
I am working on a spreadsheet and could use some help
I got a sheet where I need to pull the numbers listed under the columns
for example I have cut and pasted my data below. It did not paste well however I think you might be able to still figure it out.
I need to know how many Game 1's are being played in each week
and I need to know how many Game 2's are being played in each week.
TeamsGame 1Week #Game 2Week #Game 3Week #
Florida GatorsTroy2Tennessee3At Kentucky4
Texas LonghornsAt Wyoming2UTEP4Colorado6
USC TrojansSan Jose State1At Washington3Washington State4
Oklahoma SoonersTulsa3Baylor6Kansas State9
LSU TigersAt Washington1Vanderbilt2UL Lafayette3
I need to Count the Balance Numbers . if Textbox1 value is 5 then show the Textbox2 zero.after saving textbox2 value is showing 4 and next time 3 .....0
View 6 Replies View RelatedWhat I am trying to do is to loop through ALL 6 number combinations and count how many Odd & Even numbers there are in each of the 6 positions. For example, for number TEN I would like the total combinations where number TEN is Odd in position ONE, then number TEN is Even in position ONE, then number TEN is Odd in position TWO, then number TEN is Even in position TWO etc upto and including where number TEN is Odd in position SIX, then number TEN is Even in position SIX. Obviously number TEN is Even, but out of the TWELVE columns of data for each of the numbers there will be SIX with a figure in it and SIX showing ZERO. Here is the code I have so far but can't quite get it to work.
Code:
Option Explicit
Option Base 1
Sub Odds_and_Evens_by_Position()
[Code]....
I have a column full of Invoice No's. I want to count the number of Invoices that are unique, ir avoiding duplicates.
I know I can use the Advanced filter facility but I'd rather do it in a formula if possible.
I'm working in Excel 97, trying to use a formula I found in the archives here to count unique numbers in a column.
=SUMPRODUCT((V2:V10000"")/COUNTIF(V2:V10000,V2:V10000&""))
I'm not exactly sure what this formula is doing, but it seems to work reasonably well, except that it's adding one to my total.
i.e. I have a total of 15 and it returns a value of 16 or I have 0 and it gives me 1.
If for example:
I place number 7 in cell A2, A3, A12 and A22. I want to know the delay this particular number has. Looking at the example placed before the pattern should be the following (A2) 0, (A2-A3) 1, (A3-A12) 9, (A12-A22) 10. After A22 there's is no more number 7 therefore the delay in the example is of 3 i want this to change automatically until the next 7 appears. I've given an example, from C1 to P1 i have written 14 numbers i would like to know the delay of all these numbers.....
I have a column with some rows with data, some blank and some with symbol. These data are only numbers in the format as: 3110, 4789 / 22465. These numbers are just numbers representing project number. I would have numbers only the format shown above or else a blank cell. I need to count the rows that have numbers in them. If i use count, it counts and displays only the number of rows that are similar to 3110 format but totally excludes cells with 4789 / 22465 format. How do i make excel count rows that also includes cells with 4789 / 22465 format?
I have these two very simple vba commands that I need to combine
Range("A6", Selection.End(xlDown)).Select
Range("A4").FormulaR1C1 = "=COUNT(the range defined above)"
in order to count the numbers within the selected range
I have a spreadsheet that has a colum which has a duration column which is counted in Minutes, i am trying to do a formula that would look at this col and count up instances, egc =>5 but =<10, then >10 but =<20 and so on, I have tried and failed misserably trying CountIf and SumIf.
View 4 Replies View RelatedI have a list of random numbers in column A the number range is from 0 to 20,000. What I am trying to do is to count the sequential numbers after each random number....sorry this is not really explained well so I willl use a numeric example.
A
23
24
25
33
34
60
77
80
Above is what I have in column A you can see that my number range starts a 23 so I would like to count the sequential numbers that occur from 23 in this case it would be count(23,24,25) giving the answer 3 I would like this answer to be inserted into column B next to 23 and the numbers that were counted in this formula then be deleted as rows (i.e. where the number 24 and 25 was counted then the rows containing these numbers are deleted), The macro moves then to count the next number.
In the case of just a single number then a value of 1 is entered into the column next to the number indicating that there was only one number in that sequence.
I need to count numbers betwen a max value and min value, for example 4 and 50. The numbers are in a range for example A1:A19
View 2 Replies View RelatedI'm having trouble getting Excel to count how many times each 'Colour' appears in each lottery draw. I've searched the previous questions and I think I'm nearly there, however I still can't quite get it right. I've added a small example to show what I mean.
View 9 Replies View RelatedI have a daily column of numbers of approx 600 rows and the number is either a 0 or 1 and the 0 or 1 are in a random order in each row like;
1
1
1
0
1
0
0
0
1
0
0
1
I would like to find the min number of rows with 1, the max number of rows with 1, the totals of consecutive rows with 1 ie 3 consecutive rows of 1 appear 4 times, 4 consecutive rows appear 6 times etc and the average of the consecutive rows with 1.
I am preparing a attendance sheet. I am using 1 & 0 for present(=1) & absent(=0). I want to find out if a student has been absent for three consecutive days and if there is three consecutive 0 then the formula should return the value 0 ( the student gets 0 if he is absent for 3 consecutive days ) otherwise it should add all the 1s in the row. i.e
1 1 1 0 0 1 1 0 = 5
10 0 0 1 1 0 0 = 0
