I have the data as follows in each cell a number:
1 5 6 23 45 2
6 23 45 5 1 22
9 10 11 1 36 5
I have this kind of data going down about 2000 rows. I want to find how many times 1 and 5 appear in each row until there is no more data to read. I found the formula below but I cant use it for 2000 lines plus any extra that will appear in the future...
I have tried a little bit of different conditional formatting but cannot seem to get what I want.
So then I found this code that will do what I want if I could get it to recognize the highlight.
Sub HilightRows()
For Each cl In Range("C:C")
If cl.Value = 202546 Or cl.Value = 102725 Or cl.Value = 192473 Then
Rows(cl.Row).Highlight = True
End If
Next
End Sub
I want to be able to highlight rows that have certain numbers. When it finds the number it highlights it and goes to the next one and highlights it and so on. The numbers reside in column 'C'.
I changed Row(cl.Row).HiddenRows = True, To Row(cl.Row).Highlight = True. But it is not working.
I have a column with some rows with data, some blank and some with symbol. These data are only numbers in the format as: 3110, 4789 / 22465. These numbers are just numbers representing project number. I would have numbers only the format shown above or else a blank cell. I need to count the rows that have numbers in them. If i use count, it counts and displays only the number of rows that are similar to 3110 format but totally excludes cells with 4789 / 22465 format. How do i make excel count rows that also includes cells with 4789 / 22465 format?
If you look at the attached file in Row 41, Column H, the count function is not working properly... it is mis-counting, the numbers that appear. It does not work either in F41 and G41. It seems to be having a problem reading the if function I created. Does anyone know how to correct this, or change the if function formula so it doesn't have these issues.
View 8 Replies View RelatedI have a 52 (one for each week) page workbook. I am trying to average cell J9 for the entire 52 pages. However the information is not added to the cell until the end of the week so week 30-52 all have 0s and should not be counted in the dividing number. Is there a way to have Excel count the number of cells that have a number (not 0) and divide the sum of the cells but that number.
=(WK1!J9+.....WK52!J9) / (counted number of cells not = 0)
I would like to count all of the cells in a filtered range which contain specific text. These cells will also contain numbers.
The cells either contain one of the following
EXA 130
130
EXB 130
The number could be any number (not just 130) the text will only be EXA or EXB
So I am looking for the number of cells in a filtered range (visible cells) which contain EXA (plus any number)
SUMPRODUCT(SUBTOTAL(102,OFFSET(X8:X3000,ROW(X8:X3000)-MIN(ROW(X8:X3000)),,1--(X8:X3000,"*EXA*")
The above doesn't work and I have attempted lots of variations of this with no luck.
I'm using Excel 2010 and my spreadsheet contains numbers in columns A:E and approx 500+ rows. Here is a 10 row example of my data:
A B C D E
0 1 2 3 4
5 6 7 8 9
0 2 4 6 8
1 3 5 7 9
1 2 4 5 8
3 4 5 6 9
9 8 1 2 3
7 6 1 4 0
0 8 2 1 9
1 0 5 3 2
I would like to count the number of consecutive times each number appears (to a max of 9 consecutive times in a row). So, from my example above:
Number 1 appears:
1 consecutive time = 1 (appears in row 1)
2 consecutive times = 1 (appears in rows 4 & 5)
3 consecutive times = 0
4 consecutive times = 1 (appears in rows 7, 8, 9 & 10)
Number 2 appears:
1 consecutive time = 4 (appears in row 1, row 3, row 5 & row 7)
2 consecutive times = 1 (appears in rows 9 & 10)
3 consecutive times = 0
4 consecutive times = 0
Number 5 appears:
1 consecutive time = 2 (appears in row 2 & row 10)
2 consecutive times = 0
3 consecutive times = 1 (appears in rows 4, 5 & 6)
4 consecutive times = 0
and so on....
The format of the text in which I need to extract numbers is as follows:
23411268 - 23411270
Need to extract the following:
23411268
23411269
23411270
These numbers have to be listed in three seperate rows.
following issue:
The following table is given:
flower
20
rose
flower
21
rose
[Code] ........
Which needs to be turned into:
flower
20
22
rose
flower
31
32
blossom
tree
1
3
apple
The last column is the one that dictates when a new range of numbers start. There should be one range of numbers for Rose, One range for Blossom etc.
I want to delete rows in whole list and numbers of rows to be deleted I have in for example C column. How to do it?
View 9 Replies View RelatedI have a field that contains the following: 012100002030
I need a formula that will tell me whether or not the string contains a number higher than 2 or whether or not it contains more than one 2.
Examples:
001000002011
111111000022
401110000000
the first loan would not meet the criteria as it contains no number higher than 2 and only contains one 2.
the second loan would meet the criteria as it contains two 2's.
the 3rd loan would meet the criteria as it contains a number higher than 2.
I have a spreadsheet in which I needed to add the row totals of cells affected by conditional formatting. Ozgrid came to the rescue here (kudos to Dave H and JimFuller1), but now if I sort by these totals the results do not match the rows they are associated with. The attached spreadsheet shows the values the users want to see on Sheet1. The user changes the highlighted values in the rows by changing the values in A1 and B1. These index a set of tables on Sheet3, and Sheet2 mimics the CF conditions in order to provide the totals in col V of Sheet1.
Now if I filter a Sheet1 field on nonblanks (to get rid of the blank rows) and then attempt 'Sort Descending' on Col V, all the rows appear to sort correctly with the exception of Col V which now appears to give the wrong total for the row.
I have several lists that I need to be able to print out periodically.
The main worksheet that underpins each list is over 900 lines long and numerous calcs and formulae populate columns to provide the data for my 'print lists'.
I need my 'print lists' on seperate worksheets and I have linked the data from my main worksheet results, using IF statements to stop unwanted results being displayed by making the rows appear empty (i.e. to display "").
Due to the design of my main Worksheet it is inevitable that I have many rows in each 'print list' that are not required for that particular 'print list'.
I want to remove the 'empty' rows from the print sheets at the time of printing. I cannot use the GoTo > Special > Blanks > Delete Rows because the rows are not recognised as being 'blank'.
I have attached 2 screenshots of my 'print lists'.
P.S. I am not assuming anything but I have searched on OZGRID and it appears to me that I might need to use Excel/VBA?
the 'Odd-Even' count in the attached worksheet? I want to do away with columns 'K' to 'P' but still keep the odd-even count in columns 'H' & 'I'. I can get it work so far but I would really like to have it so that columns 'K' to 'P' are not visible. I know you could hide those columns, but is there a better way to do this? Also I would like to keep the Odd-Even counts for the blank lines blank until you add data to them.
View 4 Replies View RelatedI am trying to use a countif formula to calculate how many cells are above 95% from a given row.. However, some of the cells in the row has numerical values and not percentage. How can I modify the formula to calculate how many cells are above 95% from the whole row? Example as below:
A B C D
94.8% 4.25 3.25 96.5%
Based on the above, I used a countif formula to calculate how many cells are above 95% but the solution was wrong.
I have a column of numbers of approx 3000 rows and the number is either a 0 or 1 and they are in a random order in each row. I would like to count the number of 0 in the column. If there is consecutive 0 (a block of 0), I would still need to count it as a single occurrence.
For example, the count (or sum) for the number of occurrences for the number 0 in the below would be 4.
0
1
1
0
I have a daily column of numbers of approx 600 rows and the number is either a 0 or 1 and the 0 or 1 are in a random order in each row like:
1
1
1
0
1
0
0
0
1
0
0
1
I would like to find the min number of rows with 1, the max number of rows with 1, the totals of consecutive rows with 1 ie 3 consecutive rows of 1 appear 4 times, 4 consecutive rows appear 6 times etc and the average of the consecutive rows with 1.
I am working on a spreadsheet and could use some help
I got a sheet where I need to pull the numbers listed under the columns
for example I have cut and pasted my data below. It did not paste well however I think you might be able to still figure it out.
I need to know how many Game 1's are being played in each week
and I need to know how many Game 2's are being played in each week.
TeamsGame 1Week #Game 2Week #Game 3Week #
Florida GatorsTroy2Tennessee3At Kentucky4
Texas LonghornsAt Wyoming2UTEP4Colorado6
USC TrojansSan Jose State1At Washington3Washington State4
Oklahoma SoonersTulsa3Baylor6Kansas State9
LSU TigersAt Washington1Vanderbilt2UL Lafayette3
I need to Count the Balance Numbers . if Textbox1 value is 5 then show the Textbox2 zero.after saving textbox2 value is showing 4 and next time 3 .....0
View 6 Replies View RelatedWhat I am trying to do is to loop through ALL 6 number combinations and count how many Odd & Even numbers there are in each of the 6 positions. For example, for number TEN I would like the total combinations where number TEN is Odd in position ONE, then number TEN is Even in position ONE, then number TEN is Odd in position TWO, then number TEN is Even in position TWO etc upto and including where number TEN is Odd in position SIX, then number TEN is Even in position SIX. Obviously number TEN is Even, but out of the TWELVE columns of data for each of the numbers there will be SIX with a figure in it and SIX showing ZERO. Here is the code I have so far but can't quite get it to work.
Code:
Option Explicit
Option Base 1
Sub Odds_and_Evens_by_Position()
[Code]....
I have a column full of Invoice No's. I want to count the number of Invoices that are unique, ir avoiding duplicates.
I know I can use the Advanced filter facility but I'd rather do it in a formula if possible.
I'm working in Excel 97, trying to use a formula I found in the archives here to count unique numbers in a column.
=SUMPRODUCT((V2:V10000"")/COUNTIF(V2:V10000,V2:V10000&""))
I'm not exactly sure what this formula is doing, but it seems to work reasonably well, except that it's adding one to my total.
i.e. I have a total of 15 and it returns a value of 16 or I have 0 and it gives me 1.
If for example:
I place number 7 in cell A2, A3, A12 and A22. I want to know the delay this particular number has. Looking at the example placed before the pattern should be the following (A2) 0, (A2-A3) 1, (A3-A12) 9, (A12-A22) 10. After A22 there's is no more number 7 therefore the delay in the example is of 3 i want this to change automatically until the next 7 appears. I've given an example, from C1 to P1 i have written 14 numbers i would like to know the delay of all these numbers.....
I have these two very simple vba commands that I need to combine
Range("A6", Selection.End(xlDown)).Select
Range("A4").FormulaR1C1 = "=COUNT(the range defined above)"
in order to count the numbers within the selected range
I have a spreadsheet that has a colum which has a duration column which is counted in Minutes, i am trying to do a formula that would look at this col and count up instances, egc =>5 but =<10, then >10 but =<20 and so on, I have tried and failed misserably trying CountIf and SumIf.
View 4 Replies View RelatedI have a list of random numbers in column A the number range is from 0 to 20,000. What I am trying to do is to count the sequential numbers after each random number....sorry this is not really explained well so I willl use a numeric example.
A
23
24
25
33
34
60
77
80
Above is what I have in column A you can see that my number range starts a 23 so I would like to count the sequential numbers that occur from 23 in this case it would be count(23,24,25) giving the answer 3 I would like this answer to be inserted into column B next to 23 and the numbers that were counted in this formula then be deleted as rows (i.e. where the number 24 and 25 was counted then the rows containing these numbers are deleted), The macro moves then to count the next number.
In the case of just a single number then a value of 1 is entered into the column next to the number indicating that there was only one number in that sequence.
I need to count numbers betwen a max value and min value, for example 4 and 50. The numbers are in a range for example A1:A19
View 2 Replies View RelatedI'm having trouble getting Excel to count how many times each 'Colour' appears in each lottery draw. I've searched the previous questions and I think I'm nearly there, however I still can't quite get it right. I've added a small example to show what I mean.
View 9 Replies View RelatedI have a daily column of numbers of approx 600 rows and the number is either a 0 or 1 and the 0 or 1 are in a random order in each row like;
1
1
1
0
1
0
0
0
1
0
0
1
I would like to find the min number of rows with 1, the max number of rows with 1, the totals of consecutive rows with 1 ie 3 consecutive rows of 1 appear 4 times, 4 consecutive rows appear 6 times etc and the average of the consecutive rows with 1.
I'm attempting to summarise several hundred control charts.
One thing I'd like to do is be able to put in a formula to count the maximum number of successive entries that are all the same side of the mean.
Another related thing is to be able to count the longest run where successive values are the same.
