I have these two very simple vba commands that I need to combine
Range("A6", Selection.End(xlDown)).Select
Range("A4").FormulaR1C1 = "=COUNT(the range defined above)"
in order to count the numbers within the selected range
I have a spreadsheet that has a colum which has a duration column which is counted in Minutes, i am trying to do a formula that would look at this col and count up instances, egc =>5 but =<10, then >10 but =<20 and so on, I have tried and failed misserably trying CountIf and SumIf.
View 4 Replies View RelatedI'm having trouble getting Excel to count how many times each 'Colour' appears in each lottery draw. I've searched the previous questions and I think I'm nearly there, however I still can't quite get it right. I've added a small example to show what I mean.
View 9 Replies View RelatedI'm trying to count the number of numbers within a given range.
Example Row Y has cells that contain a series of numbers 1,5,9,12,23. No cell in the range should have the same individual number more than once. At the end of row Y I want to know how many numbers, not the total of the numbers are within that range.
Y
1 1,3,5
2 21,32,44
3 12,19,31
..
40 2,4,18
41 total number of numbers in range Y1:Y40 - 12
I have several cells that are either positive or negative values and the values are expressed in percentages. I'd like to know how many of the cells are over/under certain percentages. For instance, how many of the cells are over negative or positive 2%? I've tried the COUNTIF function using 2%, 4% and so on, but I always get back the same cell count regardless of the criteria I use.
View 7 Replies View RelatedI need to compare for each trip whether there is a trip with Es and no Es in it and mark every line in column E with tag "Mixed Use". In the data below trip 2 has mixed use. I have attached a sample file.
Trip Employee EntertainmentMiles
Trip 1Employee 1E827
Employee 2E0
Employee 3E0
Employee 4E0
Trip 2Employee 1758
Employee 20
Employee 30
Employee 40
Employee 50
Employee 60
Employee 70
Employee 80
Employee 9E0
Employee 10E0
I have the data as follows in each cell a number:
1 5 6 23 45 2
6 23 45 5 1 22
9 10 11 1 36 5
I have this kind of data going down about 2000 rows. I want to find how many times 1 and 5 appear in each row until there is no more data to read. I found the formula below but I cant use it for 2000 lines plus any extra that will appear in the future...
I have a field that contains the following: 012100002030
I need a formula that will tell me whether or not the string contains a number higher than 2 or whether or not it contains more than one 2.
Examples:
001000002011
111111000022
401110000000
the first loan would not meet the criteria as it contains no number higher than 2 and only contains one 2.
the second loan would meet the criteria as it contains two 2's.
the 3rd loan would meet the criteria as it contains a number higher than 2.
I'm going to be using a spreadsheet to keep track of where different people are at. So if Person 1 is in Room 3, I will stick a 3 in the box next to their name and then can look at the spreadsheet whenever I need and see what room they are in. When I'm deciding what room to put a person in, though, I need to be able to quickly glance at a list of Room #'s and see what one's are still available. So I have a bank of Room #'s in the spreadsheet....1,2,3, etc.
What I'd like, is some way to set this up so that when I put, for example, "3" in the cell next to "Person 1" the spreadsheet automatically removes "3" from the bank of available Room #'s and when I delete the "3" because the person has left, it adds "3" back to the bank of available Rooms.
I have a mass of data which look something like this:
table removed
and I require the ranges of reference numbers to be listed in a column one above the other, which requires inserting new rows. I also need the date & description columns copied down into the newly inserted rows.
So basically for example I would want the top row to now read:
table removed
and then apply the same procedure to the other ranges below this.
following issue:
The following table is given:
flower
20
rose
flower
21
rose
[Code] ........
Which needs to be turned into:
flower
20
22
rose
flower
31
32
blossom
tree
1
3
apple
The last column is the one that dictates when a new range of numbers start. There should be one range of numbers for Rose, One range for Blossom etc.
the 'Odd-Even' count in the attached worksheet? I want to do away with columns 'K' to 'P' but still keep the odd-even count in columns 'H' & 'I'. I can get it work so far but I would really like to have it so that columns 'K' to 'P' are not visible. I know you could hide those columns, but is there a better way to do this? Also I would like to keep the Odd-Even counts for the blank lines blank until you add data to them.
View 4 Replies View RelatedI am trying to use a countif formula to calculate how many cells are above 95% from a given row.. However, some of the cells in the row has numerical values and not percentage. How can I modify the formula to calculate how many cells are above 95% from the whole row? Example as below:
A B C D
94.8% 4.25 3.25 96.5%
Based on the above, I used a countif formula to calculate how many cells are above 95% but the solution was wrong.
I know enough about excel to get myself into corners with building spreadsheets we need for work. I have a situation where I'm trying to count the number of times a column shows "x*y", however * is a specific range of numbers. Depending on what the number is depends on where I want it tallied. For example I want to know all the times I have a cell that equals x14y thru x47y, but I don't want to count the cells that contain x12y or x75y.
The second part to this is that I don't want to count a cell that contains x14z if I'm looking for x14y either. I've search through the threads but haven't found a formula that works for this case yet.
I have a column of numbers of approx 3000 rows and the number is either a 0 or 1 and they are in a random order in each row. I would like to count the number of 0 in the column. If there is consecutive 0 (a block of 0), I would still need to count it as a single occurrence.
For example, the count (or sum) for the number of occurrences for the number 0 in the below would be 4.
0
1
1
0
I have a daily column of numbers of approx 600 rows and the number is either a 0 or 1 and the 0 or 1 are in a random order in each row like:
1
1
1
0
1
0
0
0
1
0
0
1
I would like to find the min number of rows with 1, the max number of rows with 1, the totals of consecutive rows with 1 ie 3 consecutive rows of 1 appear 4 times, 4 consecutive rows appear 6 times etc and the average of the consecutive rows with 1.
I am working on a spreadsheet and could use some help
I got a sheet where I need to pull the numbers listed under the columns
for example I have cut and pasted my data below. It did not paste well however I think you might be able to still figure it out.
I need to know how many Game 1's are being played in each week
and I need to know how many Game 2's are being played in each week.
TeamsGame 1Week #Game 2Week #Game 3Week #
Florida GatorsTroy2Tennessee3At Kentucky4
Texas LonghornsAt Wyoming2UTEP4Colorado6
USC TrojansSan Jose State1At Washington3Washington State4
Oklahoma SoonersTulsa3Baylor6Kansas State9
LSU TigersAt Washington1Vanderbilt2UL Lafayette3
I need to Count the Balance Numbers . if Textbox1 value is 5 then show the Textbox2 zero.after saving textbox2 value is showing 4 and next time 3 .....0
View 6 Replies View RelatedWhat I am trying to do is to loop through ALL 6 number combinations and count how many Odd & Even numbers there are in each of the 6 positions. For example, for number TEN I would like the total combinations where number TEN is Odd in position ONE, then number TEN is Even in position ONE, then number TEN is Odd in position TWO, then number TEN is Even in position TWO etc upto and including where number TEN is Odd in position SIX, then number TEN is Even in position SIX. Obviously number TEN is Even, but out of the TWELVE columns of data for each of the numbers there will be SIX with a figure in it and SIX showing ZERO. Here is the code I have so far but can't quite get it to work.
Code:
Option Explicit
Option Base 1
Sub Odds_and_Evens_by_Position()
[Code]....
I have a column full of Invoice No's. I want to count the number of Invoices that are unique, ir avoiding duplicates.
I know I can use the Advanced filter facility but I'd rather do it in a formula if possible.
I'm working in Excel 97, trying to use a formula I found in the archives here to count unique numbers in a column.
=SUMPRODUCT((V2:V10000"")/COUNTIF(V2:V10000,V2:V10000&""))
I'm not exactly sure what this formula is doing, but it seems to work reasonably well, except that it's adding one to my total.
i.e. I have a total of 15 and it returns a value of 16 or I have 0 and it gives me 1.
If for example:
I place number 7 in cell A2, A3, A12 and A22. I want to know the delay this particular number has. Looking at the example placed before the pattern should be the following (A2) 0, (A2-A3) 1, (A3-A12) 9, (A12-A22) 10. After A22 there's is no more number 7 therefore the delay in the example is of 3 i want this to change automatically until the next 7 appears. I've given an example, from C1 to P1 i have written 14 numbers i would like to know the delay of all these numbers.....
I have a column with some rows with data, some blank and some with symbol. These data are only numbers in the format as: 3110, 4789 / 22465. These numbers are just numbers representing project number. I would have numbers only the format shown above or else a blank cell. I need to count the rows that have numbers in them. If i use count, it counts and displays only the number of rows that are similar to 3110 format but totally excludes cells with 4789 / 22465 format. How do i make excel count rows that also includes cells with 4789 / 22465 format?
I have a list of random numbers in column A the number range is from 0 to 20,000. What I am trying to do is to count the sequential numbers after each random number....sorry this is not really explained well so I willl use a numeric example.
A
23
24
25
33
34
60
77
80
Above is what I have in column A you can see that my number range starts a 23 so I would like to count the sequential numbers that occur from 23 in this case it would be count(23,24,25) giving the answer 3 I would like this answer to be inserted into column B next to 23 and the numbers that were counted in this formula then be deleted as rows (i.e. where the number 24 and 25 was counted then the rows containing these numbers are deleted), The macro moves then to count the next number.
In the case of just a single number then a value of 1 is entered into the column next to the number indicating that there was only one number in that sequence.
I need to count numbers betwen a max value and min value, for example 4 and 50. The numbers are in a range for example A1:A19
View 2 Replies View RelatedI have a daily column of numbers of approx 600 rows and the number is either a 0 or 1 and the 0 or 1 are in a random order in each row like;
1
1
1
0
1
0
0
0
1
0
0
1
I would like to find the min number of rows with 1, the max number of rows with 1, the totals of consecutive rows with 1 ie 3 consecutive rows of 1 appear 4 times, 4 consecutive rows appear 6 times etc and the average of the consecutive rows with 1.
I'm attempting to summarise several hundred control charts.
One thing I'd like to do is be able to put in a formula to count the maximum number of successive entries that are all the same side of the mean.
Another related thing is to be able to count the longest run where successive values are the same.
I am preparing a attendance sheet. I am using 1 & 0 for present(=1) & absent(=0). I want to find out if a student has been absent for three consecutive days and if there is three consecutive 0 then the formula should return the value 0 ( the student gets 0 if he is absent for 3 consecutive days ) otherwise it should add all the 1s in the row. i.e
1 1 1 0 0 1 1 0 = 5
10 0 0 1 1 0 0 = 0
I have roughly 150 cells I am trying to count, some blank, some not blank, some with numbers. All are in the same column. I want use a simple function that sums the total number for me, say from (A2:A153). Answers?
View 9 Replies View RelatedI am trying to count how many orders have Part numbers A and B on the same order. If order 123 has part number A and B on it then return true or else false. I think Match and array might be a way to go but I am still not able to come up with the result.
Here's how the Data looks like:
OrderPart numbers
123A
123B
123C
123D
234A
234B
234E
346A
346C
Answer for above would be 2 orders that have A and B part numbers on the same order.