I am looking for a formula that returns the date of the first and last value in the longest continued range.
In the example:
CD30CLA3101/02/200833201/03/20086
3301/04/200853401/05/20083501/06/200863601/07/200823701/08/2008
The two formula should return the two dates in blue.
I had asked about automatically naming regions and this is an extension of that post because it's closed. The code we ended up with to name the region is:
Dim sNm As String, sRT As String
If Intersect(Target, Rows(1)) Is Nothing Then Exit Sub '------------------->
If Target.Count > 1 Then Exit Sub '---------------------------------------->
sNm = Replace(Trim(Target), " ", "_")
sRT = "=offset(" _
& Target.Address _
& ", 1, 0, counta(" _
& Cells(2, Target.Column).Resize(Rows.Count - Target.Row).Address & ") )"
ThisWorkbook.Names.Add Name:=sNm, RefersTo:=sRT
My problem now is that I need to have the regions be the length of the longest column. I've tried using a few different ways using the worksheet range but I can't seem to get it to work.
I am trying to do the following with VBA.
What i need is to find out the last cell with data and then selecting the whole range and copying it.
Please see the below.
As you can see, the column with the "longest" data range is B9,C9,D9,E9.
I need a VBA code to detect which Column has the longest Data and from there copy the entire range.
Hence, in this case, the range to be copied is From A2:J9.
Column A
Column B
Column C
Column D
Column E
Column F
Column G
Column H
Column I
Column J
1
2
ttt
rrr
m
vvv
gg
ff
fff
fff
fff
[Code] ..........
Hence,in this case, the range to be copied is From A2 to J14.
Column A
Column B
Column C
Column D
Column E
Column F
Column G
Column H
Column I
Column J
1
2
hjhjh
ghj
gh
ghj
ghj
ghj
[Code] ..........
How can I get the Longest sequence of 3's. E.g.
CA
1
2
3
5
3
3
5
4
I'm attempting to summarise several hundred control charts.
One thing I'd like to do is be able to put in a formula to count the maximum number of successive entries that are all the same side of the mean.
Another related thing is to be able to count the longest run where successive values are the same.
How I can show the longest string in a column, I've tried to find a formula that does this but it only shows the number of characters, not the actual string contents.
View 2 Replies View RelatedI have a list of dates in column A (sequential from low to high).
I have corresponding rainfall data in column S.
I am trying to find the longest run of 0's in the rainfall data and return the start and end dates. It would be great if i could tell it (in cell C8) to find the longest run below this number.
ie: i say i want to find the longest run of numbers below 5.
I am trying to figure out how to create a formula or VBA to count how many contiguous 0's there are in a specific row...and then drag this formula down many rows..for example - if a row of data contains 1,3,0,0,0,4,5,0,0,0,0,0,0,0,5,3,1,0 I want the result to be 7, because 7 is the longest streak of contiguous 0's.
View 9 Replies View RelatedI'm looking for a formula which returns the longest consecutive series of occurrences of 2 chars in a text string.
In the case I'm trying to count the longest consecutive number of nine-spares (9/) in a bowling game.
For example:
|7/|X|9/|9/|9-|9/|9/|9/|9/|X8/|longest series of 9/ would be 4.
|9/|9-|9/|9/|7/|9-|(8)/|X|7/|9-|longest series of 9/ would be 2.
|9/|(8)1|X|X|72|63|7/|8/|8/|9/9|longest series of 9/ would be 1.
I have a database application which appends an "A" to the sequence number each time an entry is amended and then posts it as a new row in the database. This means there can be multiple entries with the same number but with different amount of "A"'s afterwards.
e.g.
Cell A6 contains seq no 1
Cell A7 contains seq no 2 - Seq no 1 is subsequently amended so...
Cell A8 contains seq no 1A - 1A is subsequently amended so...
Cell A9 contains seq no 1AA - and so on and so forth..........
What i am trying to achieve is a formula which will look at the record number which is required (i.e. 1) and will search for record 1 with the most number of "A"'s appended. This way the user will only be amending the most up to date record.
The formula i have tried (but doesn't work) is:
=INDEX(A6:A65536,MATCH(B2&MAX(LEN(A6:A65536)),A6:A65536,1),0)
(B2 is the record the user wants to amend)
I am now trying to create a excel macro to auto populate all the dates with reference to a start date and end date. The catch is that only working days are required in the range. My reference cells (start and end date) are in Sheet 1 while the destination cell range are in Sheet 2. The reason for creating a macro instead of a function is that the intervals between the start date and end date changes frequently (annual, semi-annual and quarterly) Best case scenario would be a button which I can just press after i input the dates to generate the range of dates in another sheet.
View 1 Replies View RelatedI have a employee travel spreadsheet with air travel dates in two columns. I want to be able to create a rule that will highlight all the cells in a row if the date range on that row fall includes today's date. if someone is traveling in the event there is an emergency and I need to know if they are traveling that particular day. I have attached a sample spreadsheet.
View 3 Replies View RelatedI need to create formulas that reference a single date and output date ranges. The objective is to have a person input a Monday date in any given month and receive a four weeks out worth of dates and ranges. For example: In a lone cell, the person inputs 10/13/08. Automatically, the sheet produces the next full week range: October 19 – October 25 in a single cell and also produces a cell for each date. Example: Sunday 19, Monday 20, Tuesday 21, etc…. It should look like:
Monday Date:
10/13/08
October 19 – October 25
Sunday 19
Monday 20
Tuesday 21
Wednesday 22
Thursday 23
Friday 24
Saturday 25
and then repeat for three more weeks. I thought I had it figured out until the month changed. The dates continued in October instead of adding a month. This report will be ran weekly, so simply adding a +1MONTH to some cells will not benefit me as I’ll have to change the formula every week. I want the formula to compute the data without any manipulation over the next several years. The only change will be the Monday date.
I have a table that looks like this (its basically a historical data of a stock exchange):
Date
Index
January 4, 2010
[Code]....
The List continues till the current Date.
I want to calculate Average Index Values of a Date of each month within a Date Range.
Example: Calculate Average Index Values for 3rd of Each month from 1st Feb 2010 to 3rd Jan 2011. Formula should calculate Average of the Index Values for 3rd Feb 2010, 3rd March 2010, 3rd April 2010, 3rd May 2010, 3rd June 2010, 3rd July 2010, 3rd Aug 2010, 3rd Sept 2010, 3rd Oct 2010, 3rd Nov 2010, 3rd Dec 2010, 3rd Jan 2011.
Both the Date and the Date Range is variable. Also, the Index Value for selected Date of one or more month may not be available as that being a holiday. In that case, the formula needs to use the last available Index Value before that Date. e.g. If Index Value for 3rd Oct 2010 is not available, system will use the Index Value of 2nd Oct 2010.
based on user date ranges entered on sheet1, I'm trying to write code that will write each month of the date range on other sheets across the 2nd row. at this point I'm getting "object required" error at "Set DateStart = Cells(2, 6)"
I also want the date format to be mmm-yy (Mar 14) on the sheets even if sheet1 has a different format. I tried using sourcerange instead of DateStart, but that didnt work either.
Code:
Dim projStartDate As Date
Dim projEndDate As Date
Dim DateStart As Date[code]....
i am trying to create a excel macro to auto populate all the dates with reference to a start date and end date. The catch is that only working days are required in the range. My reference cells (start and end date) are in Sheet 1 while the destination cell range are in Sheet 2. The reason for creating a macro instead of a function is that the intervals between the start date and end date changes frequently (annual, semi-annual and quarterly) Best case scenario would be a button which I can just press after i input the dates to generate the range of dates in another sheet.
View 4 Replies View RelatedLet's say I have thousands of employees, but I need to determine who worked for me during a particular date range, and all I have to go on is their start date in one column and their end date in another column.
If:
A1 contains beginning date of employment
B1 contains ending date of employment
C1 contains specified beginning date (criteria)
D1 contains specified ending date (criteria)
I need to compare three cells of random dates shown in Column E, F,& G with Row's H5:AK5, H7:AK7, H9:AK7 (the Dates to these rows is Static on row H3:AK3.) EX: ROW 5 has Start Date, End Date (1) and End Date (2). Compare Cell H3 between Start Date & End Date (1). If H3 falls between or equal to Start and End Date(1) then highlight cell H5. Proceed till AK3 (higlighting only the cells H5:AK5). Then compare cell H3 between or equal to End Date (1) and End Date (2) (higlighting only the cells H5:AK5). Then do the same for ROW 7 and ROW 9.
To make things a bit more difficult I need to have " WK#" in Row 14 (these WK# is on another tab called "Task" of the workbook) needs to be displayed in Row's H4:AK4, H6:AK6, & H8:AK8. EX: Compare Date in D15 between or equal to Start Date & End Date (1) then display Wk# in D14 in H4. Continue till all dates in
D15:Z15 are compared to Start Date & End Date (1) and WK#'s in Row D14:Z14 are inputted if applicable in Row H4:AK4, H6:AK6, H8:AK8. I hope this is not confusing. I can't seem to use the upload option so here is alink to download a jpg of the sheet
I'm trying to combine the hours that a employee worked on a single date, with one of multiple time periods that exist for that employee.
I have two sets of data.
Set 1 (hours)
Employee number, date, hours
12345, 1-2-2014, 6
12345, 1-3-2014, 8
12345, 1-10-2014, 8
Set 2 (periods)
Employee number, start date, end date
12345, 1-1-2014, 4-1-2014
12345, 6-1-2014, 1-2-2014
What I'd like to do is to add the start and end date of Set 2 to Set 1 for every row in Set 1
In above example the result should be like this.
12345, 1-2-2014, 6, 1-1-2014, 4-1-2014
12345, 1-2-2014, 8, 1-1-2014, 4-1-2014
12345, 1-10-2014, 8, 6-1-2014, 1-2-2014
I created a basic excel weekly budget and would like to know how much money I have as of todays date. on the top row I have a date range from Sunday to Saturday, so it looks like this:
09-15 16-22 23-29
with the month manually put in above it.
then below I have income and expenses with a Overall below that, so basically what I want to is see the Overall value based on todays date, not sure how to do this with the weekly range and automatic current date(which is =TODAY() as far as I know) I have attached a photo as a reference.
Budget Picture.jpg
way to search and display a date from a range of cells based on less than or greater than criteria. For example I have following dates in column A:
A1: 2011/01/04
A2: 2011/02/01
A3: 2011/03/01
A4: 2011/04/01
I want to search for the date which is less than 2011/02/01 from the A column and display that date in B1 cell for example. How do I do that?
I want to do this without using any macros.
I have an 'existing results table' as per my attached sample.
I have had help previously from this forum to create lists of 'sold' stock within date ranges (tax year periods) and these are represented as 'sold list' in my attached sample.
I now need to create a list of 'unsold stock' for each annual tax year end date; i.e. populate my table with items that have been created before the end of the date range and that have not been sold by the end of the date range.
Please can someone show me the formula on my attached sample?
Please see my example in red.
I am working with Excel07 however my attached sample is in Excel03 because I couldn't upload an XLSX file.
Is there a UDF that can determine the number of weeks for a date range specific that is not relative to the week number for the year but for the date range itself. i am aware of the weeknum function but this is for week number relative to the year. eg. date range 01/03/2008 - 31/05/2008 has approx 12 weeks and 14/05/2008 will be week number 10 for the range.
View 4 Replies View RelatedI've found similar queries on the site, but none seem to handle multiple dates, and my attempts so far have been futile!
Requirement:
I press a button on Sheet1 and am prompted to enter a start date and an end date.
Depending on the dates I enter, all rows on Sheet2 which fall outside the Start/End date range will be deleted.
All dates to be checked against on Sheet2 are in a single column, and all rows are populated, there are no blanks. Dates are in the format dd/mm/yy
I'm having a problem with data validation. I set an entire column so that it could only be a date between the first date in the list and the current date. I tested a few cells to make sure that it was working the way I wanted and I noticed that it allows a random number like 3 or 5 to be input after row 50. This would create a date in the 1900s. Why is this happening and how can I stop it.
I am trying the following:
I have sheet1 where column A has dates.
I have sheet2 which has specific dates in range AX3:AZ300
I am trying to have a formula ( Index) to match sheet1 dates to sheet2 dates. and if they match then it will return as True or 1 if not False or 0. Therefore avoiding any errors
I have done following formula but it does not work
[Code].....
I am working in excel 2010. I have a tracking document that lists free tickets and their expiry dates. In the adjacent columns we track redemption details of these free tickets. What I want to do is return the oldest expiration date from A only if the ticket has not been used (i.e. B is empty). This will allow me to see the date the upcoming tickets about to expire so we can make sure they are used.
A________________B
Expiry Date________Redeemed by
15/08/2014
15/02/2014
15/08/2014________John
15/02/2010________Marc
15/02/2011________Bob
I have a column of data that keeps getting new information in it. what i need is a named range that i can use for a chart, first point in the named range will be the first value in the column, second point will be avg. of point 1 and 2, then 3rd point will be avg. of 1,2,3 etc.
View 1 Replies View RelatedI like to create "templates" for files that I work with on a reoccuring basis, just to make things simpler. The current template I am working on tracks items processed by day and is used for two reporting purposes; 1 totals the pay ending items processed so I have the dates laid out based on the 2 week period with formulas for that. The 2nd way it is reported is by the month. Since this is a template, only the first day of the first pay period for a calendar year needs to be entered and the rest of the dates populate based on that date. What I would now like to do is add columns for January - December monthly totals using a formula that will read something like "if column A (where the date is) contains 1/1/2014 - 1/31/2014, then sum up column L" and than copy that formula for the remaining months.
View 8 Replies View RelatedI need to be able to query a large date range by a small beginning and end date range and return a count when the value is = each search criteria. i.e. - Search one year of dates from a table by Beg: 7/23/2012 to End: 10/21/2012 and return a count. The beginning and end dates are dynamic and I will need to reference the cells, i.e. B102 "Beg" B102 "End" and not a static date.
View 7 Replies View Related