# Count Cells In Row Based On Criteria In Column & Row As Well

Mar 10, 2014count cells row wise that meets criteria both in column & Row as well.

View 2 Repliescount cells row wise that meets criteria both in column & Row as well.

View 2 RepliesADVERTISEMENT

I have two columns. Column A had numbers and column B has names. I need a count from column A for each name in column B.

View 1 Replies View RelatedI am looking to count every 4th column that has a average score less than 90. My columns are set with 3 scores and 4th column has the average of those scores. Like such:

untitled.jpg

I can count them using a SUMPRODUCT(--(MOD(COLUMN function but I cannot get a criteria to work.

Non-VBA preferred

Attached is a workbook that better explains what I am trying to do. I am counting pastdue accounts from several different insurance companys. I have several pastdue brackets, and I need the total amount of pastdue accounts for each bracket, for each insurance company. I think the countifs function wrapped in an index match may get the job done, but I have not been able to figure it out. right now I have a countifs wrapped in an if statement, and it is producing incorrect results.

test book 1.xlsx

I get this work a lot and am looking for a much more effective way of working the dataset,

I have numbers like 1.1, 1.2, 1.3 and so on.......

These come under criteria like (1) = 1.1, 1.2, 1.3 and so on.....

I am look for an automated way of doing a count of any number that falls under this criteria, so I want to count based on criteria (1) it would count all 1.1,1.2,1.3 and so on as one count.

I am attaching a sample document to see how it is laid out. [URL] .....

I need to have multiple ranges count based on several criteria. The hitch is that needs to count if one or more criteria is met not all. I tried using a COUNTIFS however that seems to evaluate based on AND not OR.

Is there a nested COUNTIFS or similar function that would work?

I am trying to count the number of times a code appears in column N, IF the corresponding cell on column T is blank. Column T either has a date or is blank and column N has a 4 letter code.

This is what i have been trying.

=SUMPRODUCT((CMRF!T:T=ISBLANK)*(CMRF!N:N="B2"))

I want the code in column N to match to the code currently in cell B2, i have also tried using "" instead of ISBLANK but i get # NUM! error as a result either way. the result should just be a number i.e. 400 (cells with the same code as B2 and no date in cell T)

I think I am working all around this in Excel 2003 and feel like I am in the neighborhood, but can't seem to quite get there. On sheet1 I have 2 columns of 100s of rows. All of the cells in column A will be filled in with a date as time goes by (1-May-09 for example). Several of them may be 1-May-09 as a matter of fact. In column B, some of the cells will have a number in them and some of them will be empty. On sheet2, I want to construct a formula that returns a count of cells in column B that have a number in them based on a specific date in column A. For example:

AB

1-May

1-May777

1-May

1-May

1-May

2-May999

3-May

2-May

1-May

2-May111

1-May

If I could get the formula right, it would return an answer of 1 for 1-May in the example, because only 1 of the 1-May entries in column A has a number in the adjacent cell in column B. A formula for 2-May would return an answer of 2 since only 2 of the 2-May entries in column A have numbers in the adjacent cell in column B, and so on for the month. If I understand things right, there are too many arguments for COUNTIF. It seems that SUMPRODUCT should work, but I can't make it so.

I have an personnel file with employee info, and I want to create a macro that will look in the "Master" worksheet at the Department column ("I") for anyone in Benefits, and then copy their name from the Name column ("D") into the "Benefits" worksheet. The names should begin pasting in cell "D3" but will recognize if a cell already has a name in it and then paste in the cell below that.

Here is what I have:

Option Explicit

Public Sub RatingbyDept()

Dim Dept As Range

With Sheets("Master")

For Each Dept In .Range("I2:I1000")

With Dept

I keep getting error 92 - "For loop not initialized".

I am really struggling to summarise weekly budget data into period budget data by subcategory.

I have column headings A3 being Subcategory B3 being GL Code & C3 being GL Name - where column B & C are distinct values but column A are not. And then in D2 I have the period no e.g. P01, with the Week no in D3. I want to sum all cells that are in a particular subcategory and period - the data set is broken down by weeks.

What i really need it to do is if each row in column H = "Cleared" then to only clear columns A, C to H. Theres a formula in B that needs to be left... any ideas?

Also i need this to work on all atbs as the commandbutton will on a master tab

VB:

Private Sub CommandButton1_Click()

With ActiveSheet

.AutoFilterMode = False

[Code]....

I have a worksheet with following data in 1 tab.

[TABLE]

Seq Class

SE110

SE270

SE110

SE370

SE310

SE110

SE170

SE370

[/TABLE]

In a different tab I want to calculate the unique count of sequence for a specified class.

In above eg: for class 10 it should return 2

I have a large worksheet that lists employees and the hours they work each day in a pay period.

For Example:

Column A holds a date and Column E holds the number of hours worked for a paytype. So i want to create some function that sums the numbers in column E, but only those where column A holds a date.

Then i want to return that number to a cell, say C20. I think I've managed to tell the macro which rows i want to return values from, but I can't figure out how to say "add these numbers together and put the total in C20."

I'll check this frequently if clarification is needed.

Example data:

01/05/2013

150

Yes

01/06/2013

1

Yes

[code].....

Basically I'm trying to write a formula that will sum the total of the numbers from column B but only where the month equals June AND column 3 says "Yes".

So the answer would be 101, because rows 2 and 5 are the only rows of that table that meet all the criteria, and the sum of their column B cells would be 101.

I thought I was getting there with Sumproduct and Sumif but I'm now drawing a blank. There is a little extra complexity in that I'm actually pulling the month value from a set of cells elsewhere, but if someone can solve the puzzle above I hope I can do the rest on my own as it's just locations of data to pull from other worksheets really.

Here is what I have. 4 Worksheets. The first worksheet is a summary page. I have 350 personnel that are broken down into three different groups. So each group has it's own sheet. Here is what I need to accomplish. Results need to be posted on the summary sheet.

I need to compare cells B2 & D3 for each row on a worksheet and display the number of times they match on a worksheet. For example how many times does EP & EP match on a certain row. I need to compare cells B2 & D3 for each row on a worksheeet and display the number of times they don't match on a worksheet. For example how many times does EP & MP occur. I've attached an example for reference

ABCDE1DATEEMP1Days Between SalesEMP2Days Between Sales

23/6/2012 YES0NO 33/5/2012NO NO 43/4/2012NO NO 53/3/2012 YES2NO 63/2/2012NO NO 7 3/1/2012 YES1YES682/29/2012 YES0NO 92/28/2012NO NO 102/27/2012 YES1NO 112/26/2012 YES0NO 122/25/2012NO YES4

I believe I need a loop code to do what I need, because none of the functions I've tried have worked. I want to start at B2 and go down the column until I come to a YES. When I find a YES, I want to know the number of NOs that preceded it. Then I want to go from that YES(#1) to the next YES(#2) and count the number of NOs between YES(#1) and YES(#2) and so forth, until I run out of rows. For example, in C5, the answer is 2, because there are 2 NOs between YES#1 and YES#2 in coulmn B, and a 1 in C7, because there is 1 NO between YES(#2) and YES(#3) in column B.

formula to count two criteria in the one column if there is a third criteria in another column. i.e. if column B = either "A" or "B" and column C="D". I have tried the countifs function without success.

View 4 Replies View RelatedI need a way to find a value in a column which has one or more corresponding values in an adjacent column. Then take all of the corresponding values found and count all occurrences of the found values in another column. But I only want to count the entries if an adjacent column is not blank.

Not the easiest thing to describe. Starting to wonder if I need to think in reverse. I hope the attached example makes more sense.

Book1.xlsx

I am trying to count AE2:AE601 if AE2:AE601 <= 2 and if AF2:AF601 = the value of AH2 but the formula that I have create returns a 0 when it should be returning a 1.

Where did I go wrong? Here is what I have so far.

=COUNT((AE2:AE601)*(IF(AE2:AE601,"<=2",IF(AF2:AF601,"="&AH2))))

This is probably a simple question for excel gurus, but I am a molecular biologist, and don't set up these formulas every day. I have a table full of genotypes that I have indicated as 0, 1, 2 or 3 in columns. Column heads are gene names; row heads are subjects (patient numbers). I want excel to look in row 1 in column A and see if there is a 1 and also in column B in the same row to see if there is a 1, and if both are 1, count that patient in a tally. I want to be able to get a count of the number of patients with 1's in both columns. If someone can tell me what functions I use to set up this tally, I think I can set up more elaborate formulas. At the end, I want excel to look at several columns and tally the number of patients that have 1's in several columns.

View 3 Replies View RelatedI have a spreadsheet for my customers. i Break them down in 3 categories

L c r Column o gives me the total dollar amount of all columns. I have figured out how to tell how many of each I have sepratly and there respective dollar totals

How do count how many $0 amounts in column o belong to l r c respectively

In other words if I had 10 c's how many were $0 in o. Lets say I had 10 c's but only 6 had a total greater then $0 in column o that would be 60 percent

I am attempting to count records based on 3 criteria in 3 different ranges and am hitting a wall. My formula will be on a different worksheet as it is the summary sheet.

Worksheet "Cases"

Column E - Type

Column F - Month

Column G - Year

Worksheet "Recap"

Recap month will be input into Cell I5 eg. "6" for June

Recap year will be input into Cell K5 eg. "2009"

Cells N10-N15 is a list of Types

Summary Cell J10 will need to count if

1)worksheet Cases column E = worksheet Recap N10

2)worksheet Cases column F = worksheet Recap I5

3)worksheet Cases column G = worksheet Recap K5

I've looked at the various examples in a search of topics simillar to my topic but I still can not get thsi to work.

I have a work book that contains 2 sheets

Sheet1 is called RawData of Multiple columns

Sheet2 is a quick report basded on Sheet1 data.

I need to find a way to do counts where 2 criteria are met.

Example.

Count the number of Times the phrase Major Victory appears in column M

( Range M1 to M50 ) of Sheet1 IF the value in Column L ( Range L1 to L50 ) of Sheet1 = USA

I tried this:

=COUNTIF(RawData!M1:M50,B1( AND(RawData!L1:L50=$A1)))

I am using B1 and A1 ( from Sheet2 ) as search criteria

but it gave me 0 ( and I know this is wrong ).

Based on the reading I did on simillar topics it appears that I cannot use CountIF in this case.

I have ahseet with the following columns:

Col 1 = Item Description

Col2 = Price

Col3 = Discount Rate

I would like to gather a count on another sheet of all instances in col 1 where it is equal to 'Fridge' I know I can use the SUMIF function but I would like to do it in VBA code.

What I require : Column F to be blank as long as the following is true:

1) Column A (Order) cannot be blank.

2) Column E (Status) has to be equal to either "Completed" or "Successful".

3) Column D (Sales) has to have the same date as Column C (Contact), but due to bad data quality each order number can have several rows and as long as the Sale date from one of the other "Duplicate" rows equals the contact date it needs to be counted. This is as long as there is not already a row for the Order that already has Sales / Contact day matching.

In the attached spreadsheet, I have highlighted the rows that should be blank in column F in green. My attempts at formulas to count this are in the columns highlighted in red.

WORKAROUND.xls

i need to count based on 2 seperate sets of criteria in the same row.

column G houses the total number of hits as a number,

Column E holds the division

Column B holds the job title,

rows 2 through 222

i need to sum up the numbers in each G field, where the G and E field match a specific text criteria.

I'm trying to create a formula that tells me the following:

If the item is marked as closed (vs. active), then how many renewals/terminations replacements/etc are there? These are two difference columns in a worksheet.

using various keywords, and I haven't been able to find a solution that works. It would seem SUMPRODUCT is what I need to use, but thru all the combinations I've tried, I still can't get the syntax right. The problem is: I have dates in col A, and the word "Holiday" in col D. I need to create a formula that counts the number of instances of the word "Holiday" in col D, only where the date in col A is =DATE(2008,1,1))*(A11:A45

View 9 Replies View RelatedI'm facing a big problem and I can't found a solution for days.

I'm trying to count/sum unique values in a Range, base on a criteria excluding Blank cells. Basicly I'm using the Formula Below:

=SUMPRODUCT((C2:C20"")/COUNTIF(C2:C20,C2:C20&""))

Let me Put to you an example for you been able to understand my problem.

Example considering Range "C2:C20" exluding blank cells

(1) - To count unique values

=SUMPRODUCT((C2:C20"")/COUNTIF(C2:C20,C2:C20&""))

(2) - To count unique values based on criteria in range "B2:B20"

=SUMPRODUCT((C2:C20"")/COUNTIF(C2:C20,C2:C20&"")*(B2:B20="E"))

(3) - To sum unique values on "E2:E20" based on same criteria

=SUMPRODUCT((C2:C20"")/COUNTIF(C2:C20,C2:C20&"")*(B2:B20="E")*(E2:E20))

They all work fine. But I need to insert a merge at Row 10 for

better reading purposes and the (2) and (3) are returning (#DIV/0). The (1) formula still work's.

I just don't know what to do guys ....

My data is like:

A1: 5 -- B1: X

A2: 5 -- B2: X

A3: 5 -- B3: Y

A4: 3 -- B4: Y

A5: 3 -- B5: X

A6: 8 -- B6: Y

A7: 2 -- B7: X

A8: 3 -- B8: Y

A9: 1 -- B9: X

I want the count of unique numbers in column A based on the criteria i have on column B.

So the count for X should be 4 and for Y should be 3..

Can i achieve this using formula only?

Copyrights 2005-15 www.BigResource.com, All rights reserved