What i really need it to do is if each row in column H = "Cleared" then to only clear columns A, C to H. Theres a formula in B that needs to be left... any ideas?
Also i need this to work on all atbs as the commandbutton will on a master tab
VB:
Private Sub CommandButton1_Click()
With ActiveSheet
.AutoFilterMode = False
[Code]....
Simple code that can delete entire row if certain criteria is met in a single cell
Example
I have a bank statement where under a first column (DATA TYPE), the cell could contain either "DATA" or "TOTAL"
How can I delete the rows contain the word "TOTAL" assuming the column is already sorted.
I am trying to run (or loop) through a column of cells, and if cell contains certain text (e.g. ALPHA, BRAVO, CHARLIE) and delete the row if found.
My macro as I run it:
Sub DATA_TEXT ()
'Number of cells to loop through (I am unsure how the .xlend works!)
For i = 1 to 2500
'If function defining the criteria.
If cells (1, i) = "ALPHA" OR "BRAVO" OR "CHARLIE" Then
[Code] .....
I'm trying to use VBA code to delete certain rows based on a couple of criteria as follows:
1) If column header is "TERMINAL NAME" and the cell value in that column is "BONDDESK", I need the entire row deleted.
2) Similiarly, if the column header is "PRODUCT TYPE" and the cell value in that column is "CORP", that entire row needs deleted as well.
The information is coming from another source, so the columns may change from day to day, i.e, "TERMINAL NAME" may be in Column L one day but in Column O another day.....
Each week I run a report that produces over 2,000 rows. I have to manually go through and delete things, by the time I am done, there may only be 320 rows left. I would apply a recorded macro, but the report is not consistent each week. There may be more or fewer rows depending on the week.
I would like to be able to run a macro that looks in column B for a specific value and if it contains that specific value, I would like the cells to the right of it to have their contents cleared.
Next, in column C, I have...
Employee2's Name
Employee2's Number
SPACE
[Code]....
I would like to be able to delete the rows, starting from Employee 2 to just before the second SUB TOTAL.
So, all I would have left in column C is
SUB TOTAL
SPACE
I have two columns. Column A had numbers and column B has names. I need a count from column A for each name in column B.
View 1 Replies View RelatedI have an personnel file with employee info, and I want to create a macro that will look in the "Master" worksheet at the Department column ("I") for anyone in Benefits, and then copy their name from the Name column ("D") into the "Benefits" worksheet. The names should begin pasting in cell "D3" but will recognize if a cell already has a name in it and then paste in the cell below that.
Here is what I have:
Option Explicit
Public Sub RatingbyDept()
Dim Dept As Range
With Sheets("Master")
For Each Dept In .Range("I2:I1000")
With Dept
I keep getting error 92 - "For loop not initialized".
I am really struggling to summarise weekly budget data into period budget data by subcategory.
I have column headings A3 being Subcategory B3 being GL Code & C3 being GL Name - where column B & C are distinct values but column A are not. And then in D2 I have the period no e.g. P01, with the Week no in D3. I want to sum all cells that are in a particular subcategory and period - the data set is broken down by weeks.
count cells row wise that meets criteria both in column & Row as well.
View 2 Replies View RelatedI have a large worksheet that lists employees and the hours they work each day in a pay period.
For Example:
Column A holds a date and Column E holds the number of hours worked for a paytype. So i want to create some function that sums the numbers in column E, but only those where column A holds a date.
Then i want to return that number to a cell, say C20. I think I've managed to tell the macro which rows i want to return values from, but I can't figure out how to say "add these numbers together and put the total in C20."
I'll check this frequently if clarification is needed.
Example data:
01/05/2013
150
Yes
01/06/2013
1
Yes
[code].....
Basically I'm trying to write a formula that will sum the total of the numbers from column B but only where the month equals June AND column 3 says "Yes".
So the answer would be 101, because rows 2 and 5 are the only rows of that table that meet all the criteria, and the sum of their column B cells would be 101.
I thought I was getting there with Sumproduct and Sumif but I'm now drawing a blank. There is a little extra complexity in that I'm actually pulling the month value from a set of cells elsewhere, but if someone can solve the puzzle above I hope I can do the rest on my own as it's just locations of data to pull from other worksheets really.
I would like a macro to find the columns named "apple" and "peach" and delete them. These would always be in row 1 but would always be in different column letters which is why I want the macro to simply find these columns by their name and not by their column letter.
And yes, I do mean the entire column altogether, shifting entire columns to the left. Wipe it off the face of the earth
Formula below works for one string, "review" but i also need it to work for "audit" "project" and "done" too.... so essentially someone can go into the sheet - hit a button and remove all these lines in one go.
[Code] ......
I would like to obtain the below issue using VBA. I would like to delete the row if the criteria hasn't met. For example,
If cell "B3 = Dec-12" and if cell C3 is not equal to "31" then delete the entire row.
If cell "B4 = Feb-12" and if cell C4 is not equal to 29 then delete the entire row.
If cell "B5 = Feb-13" and if cell C5 is not equal to 28 then delete the entire row.
This need to be applied for the last row in column A.
Basically I am looking if column B has month and Year (i.e. MMM-YY) and if column C doesn't have that particular month days then the entire row has to be deleted.
I have a sheet with say 1000+ rows that is a QA report of possible mistakes found in a employee rostering tool.
The report finds all occurrences where the staff member only has one coffee break rather than the two they are entitled to. However, on days where they have training, or other half day commitments, on of the coffee breaks is not entered into out tool. This means we are getting a whole lot of entries that we do not require(i.e. one coffee break error).
The tool uses icons but the cells do have a single unique character under each icon type. For example, the coffee break cells have a "T" and training cells have a "&" underneath the icon (without quotes). The staff members day is separated into 15 minute blocks and each block occupies a cell in a column. This means each staff members day spans many columns in a row (i.e. C=8am, D=8:15am, E=8:30am etc...).
What I have been trying to accomplish is to create a macro in VB code that will locate any row with both a "T and a "&" and delete it. This will eliminate occurrences that we are aware of and leave only genuine errors. There are other combination's that I would like to include also such as:
"T" "["
"T" "#"
"T" "@"
"T" "]"
The first row is headers and the first two columns contain team names and staff names which I am trying to exclude (because names contains "T"'s ).
I have spent many hours now looking for example code on Google, this forum and other forums, however most of the examples I have found are looking for two criteria within a column or specific criteria that is not suitable to my application (i.e. values <> certain numbers etc...).
if in column A in some row is text "today" then delete this row and delete all rows until in row B wont be empty cell. I have start (If in A is "Today" then ... ) but thas's all
View 5 Replies View RelatedI had a raw data sheet in which i need to prepare a statement just like the attached worksheet.
My requirement is to delete all those rows in the department column except the department which starts with "C" Just like "CNN" & "CNN-IN".
Rows with data containing the words starting with "CNN" should not be deleted .The rows can contain words with "CNN" or "CNN*"(here * denotes anything after the word CNN)
I had just formatted the whole worksheet for easy reference.Actually the raw data is extracted from other program which is very clumsy & irregular.
The department column might be in any column.
I am attempting to create a macro that will delete an entire row, based upon multiple criteria. The data looks something like this:
-----Column A-----------Column B---
1.-- Computer_X ------- Software_A
2.-- Computer_X ------- Software_B
3.-- Computer_X ------- None
4.-- Computer_Y ------- None
5.-- Computer_Z ------- Software_A
6.-- Computer_Z ------- None
I would like to delete the entire row if:
1) Column B entry is "None"
AND
2) Column B has entries other than "None" that match Column A
So I do not want to delete a row with a unique name in Column A and "None" in Column B. I only want to delete the rows that have "None" in Column B, and multiple entries for the match in Column A.
Using the data example above, Row 3 and 6 would be deleted. Row 4 would not be deleted, since Column A (Computer_Y) had only one row of data, with "None" entered in Column B.
I want to be able to delete certain rows based on multiple criteria. If data in the row does not meat the crieteira, it shud be deleted. I have attached the excel file sample in which I want to keep the highlighed rows and detele the rest. Its base on Origin city and Destination city combination. Eg: If Origin city="A" and Destination City = "B", I want to keep the row. Like wise for all highlighted rows. but if the Origin City = "B" and Destination City = "U" I want to delete the row.
View 9 Replies View RelatedIs there a vba code that can delete the entire row based on two criterias? If a row has a location of Canada and is a female, then delete the entire row.
Name Location Gender
Alan Mexico Male
Dick USA Male
Sharon Canada Female <-- This will be deleted if based on criteria
Mike Canada Male
I am a pharmacist that runs reports and I need to sort and exclude data
It is in Excel 2003 format
I run a report that includes a patients name in one column, the medications name in another column and if the medication was withdrawn, wasted, returned or restocked in another column. Withdrawn, wasted, returned or restocked are treated as different functions and each have their own row entry. Patient and medication name are the same in all situations
I need a macro that will look at the patients name and medication name, see if it is the same and delete all rows that have a withdrawal with an associated wasted, returned or restocked.
I have a table of data with which I need a macro to clear a range of data based on certain criteria. I have attached a file as an example. In this example the current period is 6. I therefore need to clear columns which have a period of 7 or higher.
Essentially, if the current period is x, then clear the range in the period columns if the period is greater than x.
I am trying to figure out how to have some VBA look down Column 1 and where the Cell's string value = "GRANDTOTAL", to DELETE that ROW and ALL ROWS below.
Can anyone help me out in writing the Visual Basic code?
few macros/vba that delete rows based on criteria in a cell.
I'm after something a little different. I have a workbook with sheets called Raw Data1, Raw Data2,Raw Data3, Raw Data4 and Raw Data5 and Menu.
There is a column of data in each of the sheets which has a column header of 'Location', however the column where this is located will vary from sheet to sheet. For example in Raw Data1, this is column 'J' and on Raw Data2 it will be column 'M', ( I'm not at work and can't remember the specific column positions for all sheets re: 'Location').
Is it possible to have on the 'Menu' sheet, say in cell B5 a value of 'Locationa' and have rows be deleted in each of the Raw Data that do not match the value in B5?
I have 2 columns A and B. The data is in column B.
What I'm trying to do is delete entire rows from my current selection if they do not begin with mailto:
I want to delete the rows if they do not equal "TL" based on certain criteria, but save the info
then delete the rows if they do not equal "Fedex" based on certain criteria, but save the info
then delete the rows if they do not equal "LTL" based on certain criteria
After the information has been filtered it is supposed to load to a template giving monthly information for each of the above, but this is not working
VB:
If Load = "LTL" Then
Range("A2").Select
Selection.Sort key1:=Range("F1"), order1:=xlDescending, Header:=xlYes
For x = 2 To TotalRows
If Cells(x, 6).Value > 10000 And Cells(x, 1).Value = "FEDX" Then
[Code] ....
I am pretty sure that my problem lies within the parenthesis where it says Rows("2:" & x-1).Delete. Am I supposed to put something else there since I am deleting rows based on three different loads?
A macro is required to identify rows within a selection e.g. entire column A, that share the same value, then delete appropriate rows depending on the values in another column. The attached example details the requirements.
Extract Rec1.xlsx
I'm okay with Excel, but I'm just getting into utilizing VBA and I've been searching high and low for a simple VBA code that will remove/delete rows based off a single criteria without loop as there are over 40,000 rows. I tried a couple that I found onilne, and adapting them to my criteria range, but no luck. (All the ones that I found that work use loop and it takes about 15 mins to run through the entire spreadsheet)
I would like to maintain my first row as it's my headers. My single criteria is to remove all rows that have "NO" in column D.
I need a macro to delete old data from a large selection of data, in order to keep the size down.
What I want this macro to do is
Check all rows from 5 downwards.
If A5 (date) is less than cell $B$1 AND B5 is not equal to C5 then delete the whole row.
Continue until reaching the bottom.
I have a Macro that I use daily on a spreadsheet I get with raw line-item transaction data on it. Basically, it deletes columns I don't need to look at, applies column headers, deletes certain rows that I don't need to look at, applies an auto-filter and filters to the first group of data I need to look at, and puts a subtotal on a couple of columns at the top so I can see totals on filtered results.
I need an additional function in this Macro. At some point in the middle of the actions above, I need to evaluate all rows and delete those that are 'opposites' based on a couple of criteria. Basically, I need to delete any transactions that have been refunded in their entirety, because for my purposes those are zeroed out and I don't want to see them....