# Count With Multiple Criteria And Find Permutations

Oct 6, 2009
I have a few calculations I cannot solve for life of me. I know you guys can figure this out. In the example attached you will see the list of the numbers that were drawn (More numbers will be added as time continues).

I was able to use " countif" to find the total number of time each number was drawn.

My delima, I need:

1. Count the number of times each number was drawn by person.

John starting in cell J7

Mary starting in cell J11

2. I need to type in 4 digits in cell J19, and find all possible combinations from the list of numbers drawn

List what combination of numbers that was drawn including the date it was drawn by person starting at cell I20 using the format as shown

View 9 Replies
ADVERTISEMENT
Jul 30, 2008

I have a spreadsheet which lists letters issued, the date issued and the potcode. I need a formula that counts, on a weekly basis, the number of letters issued to postcodes in Sutton and Bexley.

I have a count sheet set up on one worksheet and the list of postcodes applicable to each area are listed on another worksheet. I have been playing around with sumif, sumproduct etc, but these don't seem to work as I am pointing the formula to a list of postcodes and not an individual postcode. For example, the formula for one week needs to tell me, the number of letters issed to Sutton between 26/07/08 - 01/08/08. This is what I tried -

=SUMPRODUCT(('MU63 NC'!$F$2:$F$10>=COUNT!B$2)*('MU63 NC'!$F$2:$F$10<=COUNT!B$3)*('MU63 NC'!$D$2:$D$10=Sutton!$A$2:$A$50))

But I get #N/A - if I change the last refernce to a specific cell instead of a range it works, but this will make the process very lengthy as there are lots of postcodes!

View 5 Replies
View Related
Aug 10, 2009

I am trying to find a formula to count rows that meet multiple criteria, but one of the criteria can be multiple values. I have a list of people with a list of clients that they are responsible for. Each person is responsible for 10-20 clients. Every day I run a report that shows the project worksheets submitted for each client and if money has been awarded or not.

I'm wondering if there is a way to count, for each person, the number of project worksheets that show "awarded" in column K. That would mean that I would have to look for, for each person, any of their multiple clients in column B and "awarded" in column K.

I am trying to put the formula in D2:D9, as I use A2:D9 for a chart. O1:P79 contain the names of the people and the applicants that they are responsible for. A17:D158 contains the list of project worksheets (updated daily). I used =SUMPRODUCT(COUNTIF(B17:B999,P1:P14)) to count the actual number of project worksheets for each person, but I can't figure out a way to modify that to add in the "awarded" criteria also.

View 2 Replies
View Related
Jul 12, 2014

if possible, with a Excel formula. Assuming a column (M7:M200) has this information:

John

Mary

Lisa

Mark

John

Albert

|_Empty _|

|_Empty _|

|_Empty _|

I would get the sum of the cells except "empty", "John" and "Mark". The result would be: John: 2 | Mark: 1 | Others: 3 (My only interest is the formula to get the result "Others: 3") I tried with this formula: = COUNTIF (M7:M200, "<> John") but remains exclude "empty" cells and "Mark."

View 2 Replies
View Related
Aug 7, 2014

In H:5 I am trying to count B:2 through B:200 if it has an x and A: through A:200 has Post put value in H:5

h.png

View 4 Replies
View Related
Aug 29, 2008

I'm struggling with a simple count problem.

Column "A" has values from 0 to 1000.

Column "B" has values from 1% to 100%

If column "A" is 250 or greater count it.

OR

If column "B" is 50% or greater count it.

View 9 Replies
View Related
Jun 20, 2006

I need to somehow count the number of times two criteria are met in a certain set of data and store it in a cell on a seperate sheet. My data is all stored in a sheet called Data and the conditions are as follows:

1. Column C = WEB

AND

2. Column D = Cancelled

So I need to count the number of times both these events occur and save them in my other sheet called Metrics. i lokoed it up on google but all the formulas I found referenced the same sheet and wouldn't work for my data set.

View 3 Replies
View Related
Feb 25, 2014

Iam doing a market report for real estate. I have attached a file for reference. I am trying to track the Active Listings within a given time period and within a specific zip code. Unfortunately my local MLS does not track historical data on Active Listings, and therefore I have to use the Listing Date and the date it no longer went active to determine which listings were active in a given time period. Some of the listings are still active and therefore do not have a "No Longer Active" date. These listings will need to be counted as well.

MLS Active by Zip.xlsx

View 6 Replies
View Related
Mar 13, 2014

What I'm trying to do count the TRUE values in multiple columns, if the criteria is correct in another column.

I've tried countifs but end up having the company included into the count, or only count the row that matches all the criteria.

If I do =COUNTIFS(A2:A7,"A",B2:B7,"TRUE")+COUNTIF(C2:C7,"TRUE") then I get 5.

When I change it to +COUNTIFS(A2:A7,"A",C2:C7,"TRUE") it works but there's a time where I need to check up to 8 Options.

Company

Option 1

Option 2

a

True

True

b

True

False

c

True

False

a

True

False

a

True

False

b

True

True

View 10 Replies
View Related
Nov 10, 2009

OK, I have a list of sales that my semester long company has sold. In the midst of these sales we are sellling a versoin of the bumble watches. people can either buy a watch, (which includes a face and a band) a face, or a band.

So I have this giant list and only like 10 watches on there. I need a formula that will count how many watches and faces we sell.

I was initially thinking something along the lines of:

=COUNT(OR('Sales Journal'!D:D="Watch",'Sales Journal'!D:D="Face"))

=COUNT(OR('Sales Journal'!D:D="Watch",'Sales Journal'!D:D="Band"))

Which worked great until I had more than one watch in there.

I can't figure out dcount, and don't know if it's even the right thing to use in this instance. If you want I can post the sales journal..

View 6 Replies
View Related
Nov 25, 2013

I have a bunch of cells that i want to count in a table based on 2 criteria. The first would be checking whether or not it matches a certain text which i can do. Now i have a column for "Completed Date" and "Deadline Date". Each deadline date is different. I know i need some sort of array function in there to compare all the completed dates vs deadline dates but i just can't think of it. This will be the second criteria.

View 3 Replies
View Related
Jan 5, 2009

I have a list of 267 individuals who are each in one of 4 class designations (A,B,C, & D). They produce widgets for me. The individuals’ names are in A2:A268, their class designation is in B2:B268; and the number of widgets they each produced is in C2:C268. Row 1 is a header row.

I used the FREQUENCY function, for the first time, to show how many of the individuals produced 1-10, 11-20, 21-30, 31-40, 41-50, 51-60, and 60+ widgets last year. NOW, I’d like to take it a step further and show the number of individuals that produced widgets in each of these number groupings, but want it further split out by their A, B, C, D, class designation. So, I want to see how many individuals in the “A” class that produced 1-10, 11-20, 21-30, etc. widgets; and how many individuals in the “B” class produced those numbers, etc.

I’ve been playing around with using the COUNT and IF functions together and the FREQUENCY and IF functions, but have not been successful. Am I making this more complicated than it is? By the way, their class designation doesn’t have any relation to the number of widgets they produced, and the data is sorted alphabetically by the individuals’ names.

View 2 Replies
View Related
Aug 17, 2007

I am trying to figure out how to create a formula using multiple criteria in different columns. Ideally, I need to use the whole column (i.e. E:E rather than E2:E400) because I don't want to have to update the formula every time I input data.

I will simplify my spreadsheet for example purpose. Basically, column A has a unique identifier that either begins with an "M" or an "R." Column B either contains a person's name or a "-". Column C contains a dollar amount.

1. I need to be able to count all the cells in Column A that begin with an "M" AND have a "-" in Column B.

2. I need to be able to SUM the $ amounts in Column C ONLY for the items that begin with an "M" in Column A and have a "-" in Column B.

Is there any sort of formula that might do this? I have tried SUM arrays but as I said before, I would rather be able to use the whole column.

View 9 Replies
View Related
Jul 7, 2009

For example, each job has a specific ref number and within that job ref number there is a number of lines of data, some of which we ignore and some of which we include. Each job will have a planning time using an old methodology (Planning A), a planning time using a new methodology (Planning B) and an actual time. There are a few other variables too such as the category of work.

I am trying to count the number of each unique ref no. within the sub category of work I am looking at (there are circa 50 sub categories of work). Each ref no. will only have 1 combination of work cat and sub category.

For example: ....

View 12 Replies
View Related
Jun 25, 2007

I have been asked to analyse the contribution / performance of each student in a team. What i am trying to do is to count the number of times each student has work together and then try to work out their contribution. Got stuck on the 2nd bit for like 3 weeks flat. have been trying but not luck... seems to give me 1 or 0. so i assume my attempt is only a true or false answer! All i need is a count of how many times each student work with each other, and the best backbone formula is "count". This situation is best explained by my example, D15 is the closest i got

View 3 Replies
View Related
May 20, 2008

Have list of employees and their dependents organized into the following columns:

Employee ID (unique to employee), Relationship Code (E=employee, S=Spouse, D=child), andBirthDate. Would like to add a column called Sequence Code which counts the family members (employee= 0, S=1, oldest D=2, next oldest D = 3, and so on).

Employee ID RelationshipCode BirthDate Sequence Code

100006641 E 2/5/75 0

100006641 S 1/2/75 1

100006641 D 3/9/89 2

100005555 E 2/5/77 0

100005555 D 1/2/89 2

100005555 D 3/9/88 1

Note that the list is sorted by Employee ID, but not Birthdate. Can this be done with a formula in the Sequence Code column? I really suck at VBA

View 9 Replies
View Related
Dec 7, 2013

What I require : Column F to be blank as long as the following is true:

1) Column A (Order) cannot be blank.

2) Column E (Status) has to be equal to either "Completed" or "Successful".

3) Column D (Sales) has to have the same date as Column C (Contact), but due to bad data quality each order number can have several rows and as long as the Sale date from one of the other "Duplicate" rows equals the contact date it needs to be counted. This is as long as there is not already a row for the Order that already has Sales / Contact day matching.

In the attached spreadsheet, I have highlighted the rows that should be blank in column F in green. My attempts at formulas to count this are in the columns highlighted in red.

WORKAROUND.xlsâ€Ž

View 1 Replies
View Related
Feb 25, 2014

I am currently using the COUNTIFS formula to get the information I need when the workbook is open but I would like to be able to pull these counts without opening the workbook. Here is the formula that is working correctly while the workbook is open:

=COUNTIFS([TT_Output_All.xlsx]Sheet1!$C:$C,D$1,[TT_Output_All.xlsx]Sheet1!$F:$F, "2014",[TT_Output_All.xlsx]Sheet1!$I:$I,$A17,[TT_Output_All.xlsx]Sheet1!$L:$L, "production: am owner")

Convert this formula to an array that doesn't require me to open the workbook to get the counts.

View 9 Replies
View Related
Oct 27, 2011

I have this formula to give me the number of unique locations and it works fine for cell J1:

=SUM(IF(FREQUENCY(MATCH($B$3:$B$22,$B$3:$B$22,0),MATCH($B$3:$B$22,$B$3:$B$22,0))>0,1))

What I am trying to figure out is how to populate cells N4:N5 and N8:N9 for unique locations by Fruit & Vegtables by Area A and Area B. I just have some basic data for this example as the spreadsheets are 30,000+ lines long.

View 2 Replies
View Related
Feb 22, 2012

I want to count cells that contain specific text but multiple criteria. For example in range B4:B12 I want to count the cells that contain the word 'daily' AND the word 'weekly'. Each cell in the range contains one word.

View 5 Replies
View Related
May 17, 2012

I have two ranges of data and want to count the unique number of times the values in column A occur if they have two values in column B. For Example:

ColA ColB

333310143333306344441014444430635555161246666101466661612466663063

I want to count the number of times value in ColA has the value 1014 AND 3063. My intention is to create a table that cross references the two

10143063161241014331306333116124112

I searched and found answers where multi criteria were in multi columns but I can't seem to find a solution to this means of find the unique count in ColA.

View 3 Replies
View Related
Dec 2, 2008

using various keywords, and I haven't been able to find a solution that works. It would seem SUMPRODUCT is what I need to use, but thru all the combinations I've tried, I still can't get the syntax right. The problem is: I have dates in col A, and the word "Holiday" in col D. I need to create a formula that counts the number of instances of the word "Holiday" in col D, only where the date in col A is =DATE(2008,1,1))*(A11:A45

View 9 Replies
View Related
Jul 21, 2009

I need to have multiple ranges count based on several criteria. The hitch is that needs to count if one or more criteria is met not all. I tried using a COUNTIFS however that seems to evaluate based on AND not OR.

Is there a nested COUNTIFS or similar function that would work?

View 9 Replies
View Related
Aug 12, 2009

A B C D

1 Yes Red Green

2 Yes Blue Black

1 No Blue Black

2 No Blue Green

2 Yes Red Black

I am interested in finding the number of unique entries under column A where column B = Yes; Column C = Red OR Column D = Black (answer is 2)

View 9 Replies
View Related
Jun 2, 2007

I am using the below code to count records in a range that meet multiple criteria.

myCount=0

For Each dCell In Range("MyRange")

If dCell = var1 And dCell.Offset(0,-1) = var2 Then myCount = myCount + 1

Next dCell

Is there a faster way to count multiple criteria in a VBA procedure than what I'm doing, but without using worksheet formulas? I tried "WorksheetFunction.Sumproduct" like you would in a worksheet formula, but that didn't work (unsurprisingly).

View 4 Replies
View Related
Jan 15, 2008

I have what I thought would be a simple task, but after almost a day of searching this and other sites, I've gotten no where. I have two issues that are similar. First, I need to edit my VBA code to count the number of blank cells in a column. Here's the code I'm starting with...

View 3 Replies
View Related
Jan 15, 2010

I want to be able to look at two columns and set a criteria to count. I want to look at column A and if its blank then look at column B and if it has a value of more than 0 then count.

A B

1 1.00

2 Yes 4.78

3

4 5.00

5 Yes 4.89

6 11.99

So this example would count 3

View 3 Replies
View Related
Apr 30, 2009

I'm trying to figure out how to count by two criteria, only one of the criteria has a value among multiple values in a cell and the other is a range. I tried to use sum but it doesn't count the value and count doesn't recognize the range. I attached the file so you can see what we're trying to do.

View 4 Replies
View Related
Nov 3, 2009

I have attached a spreadsheet with a small indicative data set to assist in understanding. I am trying to count the number of documents each individual has assigned to them that are not yet 'completed' (ie REGISTERED, IN WORK, REVIEWED). The problem I am trying to overcome is that the document state can be 1 of several values indicated in the same column.

I have tried using this SUMPRODUCT formula:

=SUMPRODUCT((($E$2:$E$11="REGISTERED")+($E$2:$E$11="IN WORK")+($E$2:$E$11="REVIEWED")*($B$2:$B$11="Jones")))

but it is generating incorrect values!

Specifically:

- Jones shoulld return 1

- Franks should return 3

- Smith shoudl return 0

View 4 Replies
View Related
Jun 27, 2012

I can't seem to get a formula to work. I am trying to count the number of times "EE" shows up in a range only if "CR" is listed in that row within another range. For simplicity Column A has a list with the following values scattered from A2 through A100: CR, LT, ST, DI. Column B has a list with the following values scattered from B2 through B100: EE, EF, EG.

I need to know how many EE's are listed in column B if CR is on the same line in column A.

View 6 Replies
View Related