Countif And Sum When Name / Sum Changed
Jan 1, 2010when the name changed and sum changed.
View 9 Replies
ADVERTISEMENT
Pop Up Box If Value Is Changed
Apr 24, 2007I have a forecast spreadsheet with 10 data tabs and a summary tab.
On the summary tab, cell R131 contains the year end profit figure.
What I would like to do, is whenever this value changes and I am in a different tab, a small pop up appears in the current tab telling me what the R131 value has changed by. eg "Profit up £1000"
At the moment I keep having to go back to the summary tab to see the effects of changes across the whole spreadsheet.
VBA If Cell Changed
Dec 30, 2009If the value of any cell in in column D is changed to "Closed", a message box will appear that says "Others must be notified when item is closed". In that message box, I want two buttons: Button 1 One is cancel and will undo the change. Button 2 will open MS Outlook with pre-filled email addresses and will attach the open worksheet. After the email is sent, to return to Excel.
View 4 Replies View RelatedHow Does This Code Need To Be Changed
Oct 2, 2008I have created a userform with multi pages... One of the page is up and running ok.
However I have on one page entries like customer number, name, address, and so on.
I have the same userform from a book which I like to use in one of my pages.
Now what I have problems with is that I need one page to refer to another worksheet of the workbook.
Lets say first page to one worksheet the second page to another. And so on.
Here is the code from the book and it likes to refer to the same worksheet as the userform is opening up.
Private Sub frmDFG_Initialize()
'Startzeile für das Drehfeld festlegen
If .ActiveCell.Row < 3 Then
spn_Change = 3
Else
spn_Change = ActiveCell.Row
End If
End Sub
Get The Value Of A Cell Before It Was Changed
Jul 26, 2007I have the following code on my worksheet.
Private Sub Worksheet_Change(ByVal Target As Range)
If Not Intersect(Target, Range("B2")) Is Nothing Then
Do_it
End If
End Sub
Cell B2 contains an employee number. What I need to do is save some data for the employee number that was in cell B2 just before it was changed.
Example: If employee number "10" is entered in B2.
Then the user were to change the employee number in cell B2 to "55" I would like to use the previous value "10" to do some VBA stuff with.
All Dates Changed Now Use Hyphen?
Oct 30, 2008Excel has went from using the backslash to using a hyphen. If I try to format the cell, all the date choices use the hyphen, what possibly changed?
View 3 Replies View RelatedSave When Cell Is Changed?
Jul 24, 2009Is it possible to save a workbook whenever any changes are made to any cell in a specific column? The reason - I'm putting an excel workbook out on a network drive for 4-5people to share. The sheet contains work items which are imported every 4 hours... Column A contains the status.
I want to save the file every time anybody changes a status to prevent multiple users from working on the same item. I realize that I could build a form then load each workitem into the form, then apply the save to a change event on the field/control, but that's something for next week - I need to get this out the door, bare bones, as soon as possible.
Alert When Formula Gets Changed?
Dec 3, 2013existing workbook that has evolved over several years, there are bits of data spread all over the sheets and there are several sheets.
My question is. Is there a way to show/print/email an alert with a reminder message any time any of the formula cells gets changed, something like "Be aware a formula is being changed, make a note of the changes."
When Status Has Changed, Move To New Tab
Feb 19, 2009In my spreadsheet I have column B which has a drop down list using "open" and "closed" as the choices. Whenever someone selects the closed option, I would like for that row to be moved to the next blank row on the tab called CLOSED. Is this possible? I was thinking that if it was it would require some kind of coding. I have attached my spreadsheet for you to look at.
View 2 Replies View RelatedNon-Changed Worksheet Asking To Be Saved
Jun 23, 2009I chose to place this in programming, as all the functions for this workbook are either macros or Internet Links. Nothing is ever changed on the worksheet.
I have a workbook that is fully protected with passwords both for the workbook and the worksheet. When I set up the protection, no check boxes are checked.
I have macros and internet links on the worksheet that can be selected, but none of them affect the worksheet.
As a matter of fact, I can open the workbook and close it with only "Application.Quit" in a macro and a message box comes up asking if I want to save the changes or not. If I close it with the upper right corner RED X, it still asks the question.
I have no "On Open Macros" or Links of any kind.
I have other workbooks that this does not happen on.
Picture When Combo Box Is Changed
Jun 28, 2009This is the first VBA project i've done on Excel, and its not very big. I've never done any programming before, but i need help on this
What i'm trying to do it to have the Combo box that when an item is selected the respective picture shows next to it (i've got a seperate sheet with the products, prices, pics etc...)
After trying everything to get the picture to show, i switched to VBA because it looked like i could do it in that. The first thing i did was record a macro for each picture - the first one goes like this (its called TEST)
Both Range Addresses Get Changed Not Just One
Jan 6, 2014When I move the range rDes, another range rOrig with the same address gets changed. How can I prevent this?
Code:
Sub Macro1()
Dim rSrc As Range
Dim rDes As Range
Dim rOrig As Range
Set rOrig = Selection
[Code] ........
Dates In Spreadsheet Changed
Mar 23, 2007the dates in my spreadsheet changed from dd-mm-yyyy to a random 5 digit number. For instance, if I enter in 01-07-2007, it will re format to to 39089. I am trying to fix it, but I can't seem to figure out what happened and how to get all of the dates back to normal. Is there a way to fix this?
View 9 Replies View RelatedProtect Sheet Name From Being Changed
Jan 16, 2008Can you protect a sheet name from being changed by a user?
Can you protect a sheet from being deleted by a user?
I have an Excel 2003 file available to all employees on a network. There are three sheets. Two sheets are protected with passwords and users can not enter any data on them. They are used to hold data needed by the third sheet.
The third sheet (named FORM) is for user input. FORM has a majority of the cells protected with a password. Users can enter information, save the file, print the sheet, or make duplicates of the sheet. The sheet contains data validations, conditional formatting, and formulas.
I have some VBA which acts on all the sheets (even those which users might have inserted) making them visible (very hidden) or not. When a user opens the file (whether for the first time or after adding sheets), I always want them to have FORM unhidden. I have VBA to do this but what if a user changes the name of the sheet? CRASH!
Having Macros Run When The Date Is Changed
Feb 27, 2009Is it possible to have a macro run when a date is changed each month instead of clicking on the button. I have a few macros that are ran each month in a spreadsheet (manually) but would I would like to have them run automatically when the date is changed in cell a4 each month (Cell A4 is linked to another spreadsheet tited "Input" here the date is changed each month and all of the other spreadsheets are automatically updated). The date in cell a4 is always the last day of the month. Also the name of the workbook changes each month ( I am not sure if this is important to know).
View 9 Replies View RelatedChecking For Changed Data
Apr 6, 2009I'm looking to display a message if data in the active cell is changed. I'm using the code below to check if data in a cell matches certain criteria:
Private Sub Worksheet_Change(ByVal Target As Excel.Range)
If Target.Column = 9 Then
ThisRow = Target.Row
If Target.Value Like "As*" Then
MsgBox "Please add a note about why the biology of this species is distinct the Comments column."
End If
End If
But I have another column where the cells are prefilled with data. This column stores data from a dropdown, such as Critically Endangered, Endangered, Vulnerable etc. I allow the user to change the data in these cells, by selecting an alternative value from the dropdown, but I want to display a message if they change the data in one of these cells.
Userform - What If An Entry Needs To Be Changed
Sep 30, 2009The userform takes the data to a worksheet, then i run a pivot table on the worksheet to provide an easy to view summary of entries....
I'd like the user to be able to amend a record if they see an error ... so from the userform how do i do that ? I've read a bit about refedit ( completely ) and a bit about Find...
Macro Use After File Name Is Changed
Oct 28, 2009I use Excel 2003. With a LOT of help from this board, I've written some macros for a workbook template that will be opened then saved with another name with an .xls extension. The problem is that the macros transfer data to and from another workbook template. Here's the code that's giving me problems.
Windows("BookA.xlt").Activate
Sheets("Sheet1").Select
ActiveWorkbook.Save
Range("A1").Select
Application.CutCopyMode = False
Selection.Copy
Windows("BookB.xlt").Activate
How can I use the macro if I open BookA.xlt then change the name to BookZ.xls for my data entries? At the same time BookZ is open, I may use another instance of BookA.xlt and save that one as BookY.xls. What's the most feasible way to still use the macros?
Can The Format Of Calendar1.Value Be Changed?
Nov 4, 2009I have a userform with many command buttons, one of which allows the user to input a date into a textbox via a pop-up calendar.
Everything works, except the fact that I would like to have the textbox display in the format: Wednesday, November 4, 2009 instead of the format produced by the calendar, which is 11/4/2009.
Does anyone know how to change the value of the output from the calendar?
Here's the code I'm using now:
Scheduler.PubDateBox.Value = Calendar1.Value
Lock Textbox From Being Changed
Dec 19, 2006I have a form in a workbook that has macros attached via buttons. The intention is that as you hit the revise button it creates a virtually identical sheet, renaming it as a copy in the same workbook, clearing certain fields...etc...I then have it "lock/protect" the previous revision sheet so the history can't easily be corrupted. Everything works with the exception of the forms textbox...it won't lock (more to the point I can't figure out how to lock it). Can you protect a forms textbox even?
View 2 Replies View RelatedThe Text Changed To Incorrect Value.
Mar 13, 2007I have a text file which have a column with data like xxx . however, when I open the file with excel and it displayed incorrect value like xx.xxx, x.xxx
I tried to change the format cell to text, but it still cannot display original data...
Whole Numbers Being Changed To Decimal
Apr 29, 2007when I tried to input numbers into an Excel spreadsheet (Excel 2003) the numbers were entered as decimals. Example: I type in 235 with NO decimal point, Excel enters it as 2.35, even when starting from scratch, using a new sheet or new workbook. I tried using format cell from the menu bar to choose "general" then as "number". Nothing changed. I also tried to set the decimal places at "0" using the number format. All that did was truncate the number to 2 with the .35 not being displayed in the cell. It IS displayed in the formula window as 2.35... but not as I entered it... 235. This happens no matter whether or not it's a brand new blank workbook or worksheet
View 2 Replies View RelatedAutomatically Run Udf When Color Is Changed
May 2, 2007I have a UDF that goes like this:
Function SumIfPurple(inputRange As Range, _
answerRange1 As Range, _
answerRange2 As Range) As Variant
Dim SumAnswer As Variant
'If inputRange is turned purple then it is equal to anserRange1, if it is left with no fill it is equal to answerrange2.
If inputRange.Interior.ColorIndex = 39 Then
SumAnswer = answerRange1.Value
Else
SumAnswer = answerRange2.Value
End If
SumIfPurple = SumAnswer
End Function
I would like to have a sub that will have the formula automatically calculate when the inputRange's color is changed.
Four Variables - Value To Be Changed To Return Result
Jan 17, 2014I have in the attached file four variables, with their values in B3:B6, and the results of applying a formula to them in B8.
How to determine which value variable C must be changed to so that the formula returns the result in B10?
Solution.xlsx‎
WORDPERFECT Changed EXCEL Files
Apr 22, 2014I received an email with a WORDPERFECT attachment. I couldn't open so I downloaded application (COREL)from Internet. I finally got to read my WORDPERFECT file but found out that COREL had changed all my EXCEL files to WORDPERFECT. How do I change them back to EXCEL flies?
View 4 Replies View RelatedExcel Dates Changed Into Words?
Aug 18, 2014I currently have a spreadsheet with the following. I would like to convert the GL Date to just pick up the month. I have tried =mid(cell,4,2) but because this is a excel date it will not pick up 01 as the excel number for this date is 410001
GL DateMonth
01/01/2014
01/01/2014
01/01/2014
01/01/2014
01/01/2014
01/01/2014
02/01/2014
02/01/2014
02/01/2014
02/01/2014
02/01/2014
02/01/2014
02/01/2014
02/01/2014
02/01/2014
02/01/2014
02/01/2014
Table To Update When A Category Is Changed
Feb 21, 2009I am wanting this work book to do is have a table of categories update automatically when a category is selected in the "category column". The 3rd cell to the left of the category column "Gross column" is where the data is which needs to be sent to the corresponding category in the table and utomatically update. I have attached a sample workbook.
View 4 Replies View RelatedLocked Cells Have Changed Formatting
Jan 23, 2014On an excel document that was originally formatted as a number and then locked, somehow users have changed the formatting to a date. I think it is an accident, but I can't figure out how they are doing it. I have several data files on a server where several offices have access to them to input data and somehow formatting gets changed sometimes, even when locked.
View 3 Replies View RelatedWhen Cell Date Is Changed Then Macro Should Run
Jun 25, 2014The following code works fine but now I want it to work without a userform. SO there is no userform and so no controls.
When the user changes date in a cell then a macro should run and following kind of code should execute.
[Code] .......
Run Macro Automatically Once 3 Cells Have Changed
May 21, 2008how to alter this Private Sub for my code to execute automatically once all 3 cells have changed. At the moment it executes as soon as any of the 3 cells change.
Here's the Private and Public Sub codes: