Protect Sheet Name From Being Changed
Jan 16, 2008
Can you protect a sheet name from being changed by a user?
Can you protect a sheet from being deleted by a user?
I have an Excel 2003 file available to all employees on a network. There are three sheets. Two sheets are protected with passwords and users can not enter any data on them. They are used to hold data needed by the third sheet.
The third sheet (named FORM) is for user input. FORM has a majority of the cells protected with a password. Users can enter information, save the file, print the sheet, or make duplicates of the sheet. The sheet contains data validations, conditional formatting, and formulas.
I have some VBA which acts on all the sheets (even those which users might have inserted) making them visible (very hidden) or not. When a user opens the file (whether for the first time or after adding sheets), I always want them to have FORM unhidden. I have VBA to do this but what if a user changes the name of the sheet? CRASH!
View 9 Replies
ADVERTISEMENT
Mar 5, 2013
How do I protect a select range of cells from being changed? There may be some formulas in certain cells, which produce data based on other worksheet cells. These cells are not for user data input, but for data output only. I don't want end users to acidently delete the formulas in cetain range of cells, by entering a value in the cell, which then will write over the formula.
View 5 Replies
View Related
Sep 6, 2013
I have a lot of formulas that I don't want to be changed or deleted, but I still want the user to be able to enter data into the cells.
If I use "Protect sheet" I can't select a cell or enter something into it. I sure there is some setting I have to change, but I'm not sure what to select.
I'm using excel 2007
View 3 Replies
View Related
Jan 31, 2014
1.I need to protect certain locked cells from editing and allow certain unlocked cells to be changed on multiple worksheets.
2.When all of the changes are made to the unlocked cells, I need to password protect the entire workbook (except one worksheet) from any changes. (i.e. Prevent even the unlocked cells from being edited)
3.I also need a password to un-protect the workbook and return it to the state described in # 1. above .
View 1 Replies
View Related
Jan 12, 2007
I have a sheet that is password protected. I have this code attached to a command button. It will unlock the worksheet, autofilter it, print it, unfilter it, and password protect the sheet again. However it is protecting it without a password. I need to have it protected with the password so that someone will not be able to just go to tools to unprotect the sheet.
Private Sub CommandButton1_Click()
ActiveSheet.Unprotect "rainforest"
Columns("O:O").Select
Selection.AutoFilter
Selection.AutoFilter Field:=1, Criteria1:=">0", Operator:=xlAnd
ActiveWindow.SelectedSheets.PrintOut Copies:=1, Collate:=True
Selection.AutoFilter Field:=1
Selection.AutoFilter
ActiveSheet.Protect DrawingObjects:=True, Contents:=True, Scenarios:=True _
, AllowSorting:=True, AllowFiltering:=True
End Sub
View 3 Replies
View Related
Feb 24, 2011
I am using Excel 2010 and I have a password protected workbook with password protected sheets that uses several macros. Most of them, in order to run, have to un-protect the sheet and then re-protect it again. This has been accomplished easily enough by adding ActiveSheet.Unprotect Password:= "mypassword" and ActiveSheet.Protect Password:= "mypassword" to the appropriate places in the script. All of my macros, which do various things like sorting and moving data, deleting blank rows, displaying dialog boxes containing warning messages etc. run fine.
My problem is this: when I password protect the sheets manually, I have checked the following options in the "Protect Sheet" dialog box. Under "Allow users of this worksheet to" I have checked 1)Select unlocked cells and 2)Format cells. After entering my password and closing the dialog box my sheet is protected, but I can edit cells in the manner my allowances permit. However, once I run any of the macros that un-protect and re-protect the sheet, I remain able to select and edit unlocked cells (practically, for my purposes, this means that I can input data which will appear in the default font size and color of the sheet) but I cannot format cells (which, practically, for my purposes would allow me to occasionally change the font color and size of the data). Naturally, after running a macro, the other cell-formatting options are unavailable to me as well. Is there any way to get my manual selections to remain in place after running a macro that functions as mine do? Or is there any way to make my manual selections the default settings for a protected sheet?
View 4 Replies
View Related
Apr 8, 2014
I want a sheet to copy and paste into another worksheet, I have that code and its working fine, but what I also want to do is for the sheet to be protected,so the code would be, copy, unlock, paste, lock, save.
Here is the code I have so far. I know i have to include ActiveSheet.Unprotect "passowrd" ActiveSheet.Protect "password", but I dont know where to include that last part of the code.
View 5 Replies
View Related
Jun 21, 2012
I would like to create a macro that will automatically change the name of the sheet any time a value is entered into cell a1. For example, in cell A1 of sheet1 I would input "Hello", and then the tab for sheet1 would be automatically renamed to "Hello".
Here's the twist - the workbook will have multiple sheets, and I want all tabs to reflect the value of a specific cell (a1) in each sheet.
For example:
value in sheet1, cell a1 = "Yes" - corresponding tab name would change to "Yes"
value in sheet2, cell a1 = "No" - corresponding tab name would change to "No"
value in sheet3, cell a1 = "Maybe" - corresponding tab name would change to "Maybe"
etc...
The "tab change" cell would always be cell a1 in each sheet.
View 2 Replies
View Related
May 28, 2009
I am trying to create some code that will work each time a cell is updated. For simplicity, when cell A1 on Sheet 1 is greater than or equal to 25,000, I want Sheet 2 and 3 to be shown (they will already have been hidden). When A1 on Sheet 1 changes to less that 25,000, I want only Sheet 4 and 5 to be shown. I want to be able to change the number back and forth in A1 so only Sheets 2 and 3 show when A1 is >= 25,000, and only Sheets 3 and 4 to be shown then A1 < 25,000. I can't seem to find how to hide sheets based on a cell changing. I can only find how to permanently hide sheets.
View 9 Replies
View Related
Aug 13, 2012
Iv changed the security settings to my name (along with admin) and removed 'everyone'.now when i go into my folder, everyone else's excel sheet is there but mine has gone.
is there a way i can get it back?
View 1 Replies
View Related
Mar 8, 2014
This is my basic setup, each piece of equipment will have more than one routine to be performed:
Equipment Type
Make
Model
Serial
Location
To Be Performed
Frequency
Last Performed
Performed By
Next Due Date
R1
[Code] ..........
I want to track changes on "Last Performed" and "Performed By" and, if changed, copy both values to a separate "log" sheet. In total, there could be up to 10 routines for each peice of equipment. That means I would need to track 20 columns for changes. I would like this check to be done on save because that ensures that the user is satisfied with their changes and keeps the log from being flooded. And lastly, it needs stored in the log sheet in a way that I can identify which piece of equipment it was for and which routine was done.
View 1 Replies
View Related
Jul 10, 2014
I make excel file that contains certain formulas and graphs. Now I wonder is that a way for protect that file so it can be used only on specific cumputer, so if someone copy that file and paste it on their computer file will not work properly
View 1 Replies
View Related
Jan 21, 2010
My user form has a line of code that protects the sheets and does not allow any changes and selection of cells. It worked great on my personla computer.
Running the file on another computer the code does not protect the sheet. The strange thing is that if I go the Tools>Protection> the options is set to Unprotect. That measn that the code actually has protected the sheet but I am still able to make chages. If I manually unprotect and again protect the sheet, it is protected till the time close the file and open it again.
View 11 Replies
View Related
Apr 21, 2009
Excel file 1 has:
Sheet 1: Account numbers and balances
Sheet 2: Mapping information detailing what account in file 1 is to go to a different account number in file 2.
Excel file 2 has:
Lots of sheets where information is to be keyed in.
This is a very manual process with lots of data entry to input into accounting forms I send to our head office. The "file 2" has sheet protection on all sheets so that formats, data, columns etc etc cannot be altered and only certain fields updated.
I think I have successfuly written my scripts to loop through the account values and map those to all spots in all sheets they are referenced to on the mapping document, however I am getting an error message that the "cell or chart you are trying to change is protected and therefore read-only".
Basically I look through the sheet and look for my mapping code, if that matches, I add the balance to the exisitng value of the cell, in the next column.
i.e. if B2 has the corresponding code I will add the balance to the current value of cell C2.
This is an extract of the code where I am looking up the sheet:
Dim ws As Worksheet
For Each ws In Sheets
If Left(ws.Name, 2) "OP" Then
Dim rg As Range
Dim cl As Range
Set rg = Range("A1:IV65536")
For Each cl In rg
If ActiveCell.Locked = False Then
If cl = kessanid Then
cl.Offset(0, 1).Value = acctvalue
End If
End If
Next cl
End If
Exit For
Next ws
It may be that because the sheet is protected as a whole nothing can be done but I was hoping that because I am going to the specific cell which allows input I should be able to do this.
View 9 Replies
View Related
Jan 23, 2013
I am using the following code to protect/unprotect a sheet in a tool that i am working on, which seems to work great. It unprotects the sheet runs the code inbetween the two liens of code and then protects the sheet again.
VB:
ActiveSheet.Unprotect Password = "mypassword"
ActiveSheet.Protect Password = "mypassword"
The issue I am having is if i want to go in and edit the sheet without running the code it will not let me. When I go in and type the password to unprotect it says it is invalid. I have typed it exactly how the code reads. I have even tried including the quotes but no luck.
View 4 Replies
View Related
Jan 5, 2010
Protect columns in a sheet. Is it possible to protect columns for entries?
View 2 Replies
View Related
May 12, 2009
1) I need to have code to protect the sheet that my user form is writing to. In other words, when the information from the user form is populated to the sheet, I want that sheet protected by a password that I set where I can unlock it, but no one else can.
2) I need to protect my VBA code with a password, I do not know how to do this, I have looked everywhere. I do however think this is something simple and I will kick myself once I find out where it is.
View 6 Replies
View Related
Jul 18, 2009
I'm trying to protect a sheet so that it can be unhidden only if you know the password.
This is because I have a macro that updates some of the cells and there are some people (and only those) that should be able to access it quickly and easily. -> can't use VeryHidden or cell lock.
View 2 Replies
View Related
Jan 18, 2012
I have a workbook with several worksheets. I need to prevent users from viewing worksheet mgrview unless they have a password for it.
View 1 Replies
View Related
Jul 2, 2012
the following macro, changes a few cells etc, then protects the sheet.... however I wanted the protected sheet part to have a password "Sausage"...
macro, so it protects the sheet with a password as "Sausage"
Sub RATIFY1()
'
' RATIFY1 Macro
'
'
Sheets("Outline Generator").Select
ActiveSheet.Unprotect
Range("E6").Select
ActiveCell.FormulaR1C1 = "Outline Ratified"
[Code]....
View 5 Replies
View Related
Dec 3, 2006
I have a very hidden Worsheet called DropList. On open all worksheets are protected.
When I run a Macro that calls on a value from DropList or adds a value to it I get an error message:
"Run time Error '1004"
You cannot use this command on a protect sheet.... "
In the DropList worksheet I have selected all cells and have unlocked them.
I need to keep this workbook very hidden,
How can I unprotect it, whilst keeping it very hidden, so that users can still add data via a combo list?
any suggestions.
View 9 Replies
View Related
Aug 7, 2008
I have a spreadsheet that has some queries imported from Access (Via DATA | Import External Data)
Anyways i would like to protect this spreadsheet but using the TOOLS | Protection method gets me the following message when i try to refresh my query
View 9 Replies
View Related
Jan 2, 2009
I have a worksheet where the users need to enter time. I have a macro that captures the time when the user hits Ctrl + t
What I want now is a code which protects the cell after entering the time with Ctrl + t.
I tried to do it, but my macro only works when I don't set any passwords to protect the sheet. How can I pass the password to the code and protect the sheet after the code to capture the time is being executed.
View 14 Replies
View Related
Oct 13, 2009
I find the protection options of Excel confusing. I have a pivot table. Alonside it our a few formula columns. I want to protect only the columns outside the pivot but can not get it to work. I tried this:
1) Highlight entire sheet
2) Format Cells Protection - remove checkmark from: Lock Cells
3) Highlight 4 rows outside pivot
4) Format Cells Protection - place checkmark in Lock Cells
5) Tools Protection Sheet - supply password
The result is that the 4 columns outside the pivot are indeed locked BUT SO IS THE PIVOT...ie you can not utlize the dropdowns!
It must have something to do with the pivot, on a regular sheet (no pivot) it works fine. Further if, while Protecting the sheet, I click the: allow Pivot table reporting box, then it allows dropdown usage but blows up as soon as you select something with an error about not being able to redisplay selected itemsbecause of protection being on....
View 9 Replies
View Related
Aug 21, 2008
Greetings I have a workbook with many sheets and i want a macro to protect all the worksheets with certain settings except for one sheet, sheet 3.
I have borrowed some code from this page that I cannot get to work and I would appreciate any help. the code should also have an if statement that unprotects sheet 3 but i don't know how to do that either. I just get syntax errors
Private Sub Workbook_Open()
Dim wSheet As Worksheet
For Each wSheet In Worksheets
wSheet.Protect Password:="secret", DrawingObjects:=True, Contents:=True, Scenarios:= _
False, AllowFormattingCells:=True, AllowFormattingColumns:=True, _
AllowFormattingRows:=True, AllowInsertingRows:=True, AllowDeletingRows:= _
True _
.EnableSelection = xlUnlockedCells
.EnableOutlining = True
Next wSheet
End Sub
View 9 Replies
View Related
Aug 4, 2006
Is there anyway to protect each sheet at one time? I have about 70 sheets and I dont wan to go to each and protect them. They all have the same password so I hope thats not a problem.
View 2 Replies
View Related
Sep 24, 2006
Just wondering if there is a way to prevent users from changing tab/ sheet names in a workbook? Either via sheet protection (I couldn't find any option) or using code.
View 2 Replies
View Related
Jun 22, 2014
Is there is any way we can protect sheet in such a way that; if user - Mr. A inputs his password he can only go and is able to input his data in sheet 1.
I've a file which have multiple sheets say about 80 tabs are present. My colleague only works on one of the tab (sheet) enters data, that file is placed on our general sharing folder I want to know if it is possible that I can assign protection in such a way that when she enters her password she is able to input data only on the sheet in which she works and cannot roam around to other sheets?
Or is it possible that on first sheet there is username or password can appear? And if the data inputting person opens that file and enter her password option appear which can take her to that particular sheet? And if a guest open that file he/she can only view particular sheets which contain reports?
View 1 Replies
View Related
Oct 22, 2007
I am working with Excel 2003 and find that the default "Protect Sheet" dialog box opens with a default of both the "Select locked cells" as well as the "Select unlocked cells" check boxes marked. Is there a way to change this default?
View 2 Replies
View Related
Apr 26, 2009
I've stored all my on-line passwords (about 50 of them) in one sheet in an Excel workbook. I want to protect it so that if somebody somehow got access to it, they couldn't see the sheet, much less change anything.
I tried Tools/Protection/Protect Sheet and Tools/Protection/Protect Workbook, using a secret password. Then, nobody could change the data -- but they could still see it.
So then I hid the columns first, and then protected the sheet -- which did the trick. But that seems pretty cumbersome, because it involves two steps for me to open it up (unprotecting and then unhiding).
Is there a way to protect/hide in just one step so my sheet of passwords can't be seen by an intruder?
View 6 Replies
View Related
