Having Macros Run When The Date Is Changed
Feb 27, 2009
Is it possible to have a macro run when a date is changed each month instead of clicking on the button. I have a few macros that are ran each month in a spreadsheet (manually) but would I would like to have them run automatically when the date is changed in cell a4 each month (Cell A4 is linked to another spreadsheet tited "Input" here the date is changed each month and all of the other spreadsheets are automatically updated). The date in cell a4 is always the last day of the month. Also the name of the workbook changes each month ( I am not sure if this is important to know).
View 9 Replies
ADVERTISEMENT
Jun 25, 2014
The following code works fine but now I want it to work without a userform. SO there is no userform and so no controls.
When the user changes date in a cell then a macro should run and following kind of code should execute.
[Code] .......
View 3 Replies
View Related
Jun 14, 2009
I want to capture the date and time that a cell is changed.
So if the value in cell A2 is changed, then cell B2 date stamps with the current time; similiarly if cell A3 is changed, then cell B3 date stamps...
View 9 Replies
View Related
Mar 11, 2014
When I combine 3 reports (which we get out of a system) into 1 big file, the date format remains the same (mm/dd/yyyy and right alligned). Same happens for most of my colleagues.
When 1 particular colleague goes and combine these reports, I've noticed that some of the dates are showing as text? (dd/mm/yyyy and left alligned).
View 3 Replies
View Related
Feb 27, 2009
I am looking to have a macro which will automatically add the username and date to a cell, when the cell above changes (or in this case =x). I have a bit of code from a previous project, but I have changed Target.Row to Target.Column and it is not behaving as I require:
Private Sub Worksheet_Change(ByVal Target As Range)
If Not Intersect(Range("B2:BZ2"), Target) Is Nothing Then
Range("C" & Target.Column).Value = Format(Date, "dd-mmm") & " " & Format(Time, "hh:mm") & " by " & (Application.UserName)
End If
End Sub
See the attachment for the example. What I need is whenever row 3 ="x" I need the corresponding cell in row "d" to update with the latest date, time and username. Please not the macro is currently not active on the sheet as i've added the ' character.
View 3 Replies
View Related
Dec 6, 2013
I am looking to insert a date in a Cell when another Cell's number has been changed.
I was using If statement as: If(isnumber(f4),TODAY())
but I don't think it is working properly
the cells columns would be, e.g. "Consumables stock" and "date updated".
So if someone changes a number is the "consumables stock" column, date updated column auto-updates with current date. How would I go by in doing this?
View 5 Replies
View Related
Jun 18, 2009
When a cell changes i would like the cell in the next column to record the date of this change. After achieving this i want to set up conditional formatting to compare this date to the current date and if they are the same then change the original cell's colour to show it changed today!
I started using the code below (from ozgrid) which was working fine BUT my cell value in column A is actually taken from a different column. when the different column cell value changes my cell in A changes but the script below does not seem to see this as a change. it only records the date if i physcially change the cell in A rather than another cell prompting it to change.
based on my overall objective and my plans to date please can someone suggest a solution?
current code below....
View 9 Replies
View Related
Feb 16, 2009
effectively disable ALL macros associated with a workbook if it's opened after an "expiration date" that's buried on a very hidden sheet.
I think I can figure out how to render the entire workbook useless after the expiration date, but I need to retain all formatting, underlying data and formulas so that macros can be re-enabled if I change the expiration date.
View 10 Replies
View Related
Sep 28, 2011
I am trying to date stamp a cell when another cell has been changed from a drop down selection list. For instance: If cell A1 is changed, time stamp B1. I have tried both the following codes and they both work for 1 column.
"Private Sub Worksheet_Change(ByVal target As Range)
If target.column = 1 Then Cells(target.Row, 2) = Now()
End Sub"
[Code]....
The problem is that I want to time stamp cells in columns FHJLN, when the column to the left has been modified (EGIKM). So I basically want to repeat the time stamp code for multiple columns. I have tried messing around and can get not more than 2 columns to work at a time.
View 3 Replies
View Related
Apr 7, 2014
So I have a Workbook that I want to make read-only/protect after a certain date. I also want to force the user to have macros enabled. So far I have the following script, but despite changing it to read-only it doesn't seem to do anything. I have also tried to enable protection on the sheets after that date, but am getting errors.
View 2 Replies
View Related
Aug 26, 2009
I have an Excel 2003 program that contains macros. One of the macros hides certain command bars and disables the worksheet menu bar. On close the opposite is true. The problem is, if a user uses the disable macros when opening then the worksheet menu bar and other command bars are still available. I would like to hide all of the data sheets and display another sheet that would normally be hidden displaying a message that the macros have to be enabled for the program to work correctly if disable macros is chosen. When the enable macros are used I would like the Error page to be hidden.
View 6 Replies
View Related
Aug 21, 2013
I have a spreadsheet where an engineer is expected to record sample temperatures of water outlets, along with the time he took the sample. Each outlet has a row on the spreadsheet with a column for the Temperature and column for the time. I would like to automatically input the current time(or time and date) on each line as the temperature is entered.
View 4 Replies
View Related
Jul 28, 2008
I have a user that keeps a maintenance log in an Excel worksheet and sends an updated copy once a week to a board member. Two weeks ago, the board member started complaining that he was prompted to enable/disable macros on opening and became worried when my user stated that no macros were used in the book. He is now concerned that we have sent him a virus.
I know the file is clean because I've scanned it, and when I look at the file in VB, there are no modules or classes present just the Sheets 1-3 and the ThisWorkbook file. None of these objects have any code in them. My user does have some macros in PERSONAL.XLS but they are not used in the workbook in question.
No one else gets the prompt for enabling/disabling macros. Even if I set my security to prompt for any macros, I get no message. I'm convinced that there must be some setting in his Excel that is causing this individual to get this message. Is there anything else other than a macro that would cause this?
View 9 Replies
View Related
Jul 23, 2005
What is the commands or script for deleting a macro automatically using
another workbook macro.
View 9 Replies
View Related
Jul 14, 2008
Is there a way to hide a macro from the list where you choose which to run, but not in the VBA editor? The userbox I just created calls upon 2 different macros, and has a macro to bring up the userbox. I need a way to hide the macros in Module3 from selection, but keep the macros in Module4 available to choose to run.
View 9 Replies
View Related
Apr 24, 2007
I have a forecast spreadsheet with 10 data tabs and a summary tab.
On the summary tab, cell R131 contains the year end profit figure.
What I would like to do, is whenever this value changes and I am in a different tab, a small pop up appears in the current tab telling me what the R131 value has changed by. eg "Profit up £1000"
At the moment I keep having to go back to the summary tab to see the effects of changes across the whole spreadsheet.
View 9 Replies
View Related
Dec 30, 2009
If the value of any cell in in column D is changed to "Closed", a message box will appear that says "Others must be notified when item is closed". In that message box, I want two buttons: Button 1 One is cancel and will undo the change. Button 2 will open MS Outlook with pre-filled email addresses and will attach the open worksheet. After the email is sent, to return to Excel.
View 4 Replies
View Related
Jan 1, 2010
when the name changed and sum changed.
View 9 Replies
View Related
Oct 2, 2008
I have created a userform with multi pages... One of the page is up and running ok.
However I have on one page entries like customer number, name, address, and so on.
I have the same userform from a book which I like to use in one of my pages.
Now what I have problems with is that I need one page to refer to another worksheet of the workbook.
Lets say first page to one worksheet the second page to another. And so on.
Here is the code from the book and it likes to refer to the same worksheet as the userform is opening up.
Private Sub frmDFG_Initialize()
'Startzeile für das Drehfeld festlegen
If .ActiveCell.Row < 3 Then
spn_Change = 3
Else
spn_Change = ActiveCell.Row
End If
End Sub
View 9 Replies
View Related
Jul 26, 2007
I have the following code on my worksheet.
Private Sub Worksheet_Change(ByVal Target As Range)
If Not Intersect(Target, Range("B2")) Is Nothing Then
Do_it
End If
End Sub
Cell B2 contains an employee number. What I need to do is save some data for the employee number that was in cell B2 just before it was changed.
Example: If employee number "10" is entered in B2.
Then the user were to change the employee number in cell B2 to "55" I would like to use the previous value "10" to do some VBA stuff with.
View 5 Replies
View Related
Oct 30, 2008
Excel has went from using the backslash to using a hyphen. If I try to format the cell, all the date choices use the hyphen, what possibly changed?
View 3 Replies
View Related
Jul 24, 2009
Is it possible to save a workbook whenever any changes are made to any cell in a specific column? The reason - I'm putting an excel workbook out on a network drive for 4-5people to share. The sheet contains work items which are imported every 4 hours... Column A contains the status.
I want to save the file every time anybody changes a status to prevent multiple users from working on the same item. I realize that I could build a form then load each workitem into the form, then apply the save to a change event on the field/control, but that's something for next week - I need to get this out the door, bare bones, as soon as possible.
View 2 Replies
View Related
Dec 3, 2013
existing workbook that has evolved over several years, there are bits of data spread all over the sheets and there are several sheets.
My question is. Is there a way to show/print/email an alert with a reminder message any time any of the formula cells gets changed, something like "Be aware a formula is being changed, make a note of the changes."
View 8 Replies
View Related
Feb 19, 2009
In my spreadsheet I have column B which has a drop down list using "open" and "closed" as the choices. Whenever someone selects the closed option, I would like for that row to be moved to the next blank row on the tab called CLOSED. Is this possible? I was thinking that if it was it would require some kind of coding. I have attached my spreadsheet for you to look at.
View 2 Replies
View Related
Jun 23, 2009
I chose to place this in programming, as all the functions for this workbook are either macros or Internet Links. Nothing is ever changed on the worksheet.
I have a workbook that is fully protected with passwords both for the workbook and the worksheet. When I set up the protection, no check boxes are checked.
I have macros and internet links on the worksheet that can be selected, but none of them affect the worksheet.
As a matter of fact, I can open the workbook and close it with only "Application.Quit" in a macro and a message box comes up asking if I want to save the changes or not. If I close it with the upper right corner RED X, it still asks the question.
I have no "On Open Macros" or Links of any kind.
I have other workbooks that this does not happen on.
View 10 Replies
View Related
Jun 28, 2009
This is the first VBA project i've done on Excel, and its not very big. I've never done any programming before, but i need help on this
What i'm trying to do it to have the Combo box that when an item is selected the respective picture shows next to it (i've got a seperate sheet with the products, prices, pics etc...)
After trying everything to get the picture to show, i switched to VBA because it looked like i could do it in that. The first thing i did was record a macro for each picture - the first one goes like this (its called TEST)
View 10 Replies
View Related
Jan 6, 2014
When I move the range rDes, another range rOrig with the same address gets changed. How can I prevent this?
Code:
Sub Macro1()
Dim rSrc As Range
Dim rDes As Range
Dim rOrig As Range
Set rOrig = Selection
[Code] ........
View 3 Replies
View Related
Mar 23, 2007
the dates in my spreadsheet changed from dd-mm-yyyy to a random 5 digit number. For instance, if I enter in 01-07-2007, it will re format to to 39089. I am trying to fix it, but I can't seem to figure out what happened and how to get all of the dates back to normal. Is there a way to fix this?
View 9 Replies
View Related
Jan 16, 2008
Can you protect a sheet name from being changed by a user?
Can you protect a sheet from being deleted by a user?
I have an Excel 2003 file available to all employees on a network. There are three sheets. Two sheets are protected with passwords and users can not enter any data on them. They are used to hold data needed by the third sheet.
The third sheet (named FORM) is for user input. FORM has a majority of the cells protected with a password. Users can enter information, save the file, print the sheet, or make duplicates of the sheet. The sheet contains data validations, conditional formatting, and formulas.
I have some VBA which acts on all the sheets (even those which users might have inserted) making them visible (very hidden) or not. When a user opens the file (whether for the first time or after adding sheets), I always want them to have FORM unhidden. I have VBA to do this but what if a user changes the name of the sheet? CRASH!
View 9 Replies
View Related
Apr 6, 2009
I'm looking to display a message if data in the active cell is changed. I'm using the code below to check if data in a cell matches certain criteria:
Private Sub Worksheet_Change(ByVal Target As Excel.Range)
If Target.Column = 9 Then
ThisRow = Target.Row
If Target.Value Like "As*" Then
MsgBox "Please add a note about why the biology of this species is distinct the Comments column."
End If
End If
But I have another column where the cells are prefilled with data. This column stores data from a dropdown, such as Critically Endangered, Endangered, Vulnerable etc. I allow the user to change the data in these cells, by selecting an alternative value from the dropdown, but I want to display a message if they change the data in one of these cells.
View 9 Replies
View Related
