I'm trying to close out excel through a user form (excel is hidden) button but excel crashes when it reaches the application.quit line of code.
I searched google and found one message that said that if you have add-ins that they can cause excel to crash when closing but there was no explanation or work around.
Is there a way around this problem?
I am trying to add the following to my macro to close excel when the macro is completed:
[Code] ......
This will save the workbook before exiting. How do I direct it to not save any open workbooks and exit the app?
I have this I found here and want it to close down excel as well but its not working and not sure why.
I have a command button tied to this: ....
I hate to have to come back to the forum after I Thanked you all for solving my problem, but here I am.
The code below disables the (X) button, no problems
Option Explicit
Public BooleanForClosing As Boolean
Private Sub Workbook_BeforeClose(Cancel As Boolean)
If BooleanForClosing = False Then
Cancel = True
MsgBox "Please Use Exit Button"
End If
End Sub
The next code saves the workbook , but won't Quit the programme and goes back to the Exit Button ...
I'm having a bit of a issue at getting Excel to fully shut down. it is still running in the Task Manager. There is a bit of infomation on the net about but i can;t seem to make it go away. I'm using Excel 2007 and running VBA code out of MSaccess 2007
Heres my code.
I Wrote a little program that seems to be working quite nice. The user never sees Excel but will work with userforms. I have lately come across a very irritating problem: If the user clicks on "Exit" I run the code
Application. ActiveWorkbook.Save
Application.DisplayFullScreen = False
Application.Quit
It does the job but about a minute after the whole program has exited and you are "back in windows" I get the. Microsoft Office Excel has encountered a problem and needs to close. error message. Is my file corrupt? Can I fix it? Am I exiting the wrong way?
If Excel VBA can let Internet Explorer quit if it have been running when you open excel workbook?
View 9 Replies View RelatedI'm sure there is a way to disable the 'X' (quit) button in the top right-hand corner of the EXcel application (not the 'X' for individual workbooks), or the hook the quit event so that I can run code that shut down the application cleanly? I'm sure a Windows API call is involved but do not know enough about that side of programming to know for sure.
View 4 Replies View RelatedI did the huge macro that names a bunch of dynamic ranges, all similar to the following: Range("=OFFSET(BD!$C$32,0,1,1,COUNT(BD!$32:$32))").Name = "ChtBDLabel"
I tested it as I went along, so I know it was working. Then I worked on several other tasks (copying the range to another location on the sheet, making graphs from the ranges). Now when I go back to run this again, I get: Run-time error '1004':
method 'Range' of object '_Global' failed. I went and looked what I thought were my named ranges, and they were wrong (not dynamic, just a cell reference). I deleted them and tried again with same error.
difference between these statements:
Quit, Exit , Break , Continue, Return
For example if want to stop code execution what should I use?
why my keyboard navigation keys (Tab and arrow keys) quit working after the code below executes? Other keyboard keys like alpha or numeric characters and Enter work but I can't move to another cell without clicking it. Selecting another ws, then returning to the "Master" ws fixes the problem. I tried activating Master near the end of the code but that didn't help. Master is not a protected sheet.
Private Sub Worksheet_Change(ByVal Target As Range)
If Target.Column 7 Or Target.Cells.Count > 1 Then Exit Sub
If IsEmpty(Target) Then Exit Sub
Dim NextRow As Long, MySheet As Worksheet
Set MySheet = Sheets(Target.Value)
NextRow = MySheet.Cells(Rows.Count, 1).End(xlUp).Row + 1
With MySheet
.Unprotect "1234"
Range(Cells(Target.Row, 1), Cells(Target.Row, 6)).Copy .Cells(NextRow, 1)
With .Cells(NextRow, 7).......................................................
I have a fairly elaborate close-down routine for my workbook.
1) Quit out of fullscreen (restore initial state of excel before saving)
2) Hide all sheets but one (enforces cant do anything unless macros enabled)
3) Automatically save without a prompt
4) Close the workbook
I've researched it well and implemented it to the point where it works, but only if the user clicks the excel application close button -- the "X" in the titlebar (hence not in fullscreen).
However, if I launch the process via a userform button click, then for some reason the
DisplayFullscreen = False, Sheets hiding, and save codes have no effect (fullscreen persists, sheets are not hidden, no file is saved) in the Workbook_BeforeClose() subroutine....
I repeat: all the above works fine if process was launched by "native" excel button, but does not have any effect if launched from a userform commandbutton. (?!?!) any ideas what's going on?
I'm including my code so you can get an idea how it's structured.... by it's pretty "by the forum" as far as I can tell...
Private Sub CloseButton_Click()
If(1) Then
'Method 1 - close directly from userform command button
With ThisWorkbook
'.RunAutoMacros (xlAutoClose)
.Close
End With
Else
'Method 2 - set a timer to call a function to perform
' "ThisWorkbook.close" in a function outside of the userform
CustMenuCloseTimer = Now + TimeSerial(0, 0, 2)
Application .OnTime CustMenuCloseTimer, "CustMenu_CloseAction"
End If
End Sub
Im copying and pasting data from one workbook to another but when I want to close the source workbook, it comes up with this message that I have much data and if I want to keep this in a clipboard. I thought I could disable this with Application.DisplayAlerts = False but when I do this, Excel freezes. Im I doing something wrong. How can I supress this window?
Public path As String
Sub Get_data()
path = "\Nlchoosa.nlOPS_Processes$OPS_ProcessesReports Sector performance"
Workbooks.Open Filename:=path & "ReportsSector Performance Reporting week.xls"
Range("A1").Select
Range(Selection, Selection.End(xlToRight)).Select
Range(Selection, Selection.End(xlDown)).Select
Selection.copy
Windows("Sector Performance report Week.xls").Activate
ActiveSheet.Paste
Application.DisplayClipboardWindow = False
Windows("Sector Performance Reporting week.xls").Activate
Application.DisplayAlerts = False
End Sub
I have the following code which filters data in a sheet, and loads the numbers into textboxes on a userform. There are two multipage controls, each with several textboxes on them. I have commented out several lines because if I leave any of them in, it crashes excel.
It will work once. But if I close the workbook, re-open it, and run the code again, it crashes.
The thing I find really interesting is that all the 'problem lines' were added in as part of a retro-fit. The person I created this workbook for needed one more column of data. I followed the same programming pattern as what I used on the other, but only these ones seem to cause problems. Any thoughts?
NOTE: The message boxes were just to help me figure out which lines of code were causing the crash. ....
My main workbook basically starts with, Sub macro1 (), Do Until, Web Query, many many many calculations in between and finally ActiveWorbook.Save.
After ActiveWorbook.Save it will start the same process with a new web query and works all perfectly and perpetually just as I would like it to....
I'm trying to use a listbox and wanted to have the data sit in a different sheet. When I do this, I get a message about low memory and then excel says it has an error and shuts down. When I move the data to the same sheet as the listbox, there is no problem.
I'm using excel 2000 and that's all I can get (at work). Any thoughts? Should I just put the data on the same sheet and hide it? Is there a way around this?
Just recently Excel crashes about 4 out of 5 times. Any advice to where I should start looking and how to handle this please?
View 7 Replies View RelatedIt is a simple form which has a Module/Macro to load the form on clicking a shape.
Although the form works fine for me it occasionally crashes for other user.
The Debug says that there is an error in the Module with the line "frmCallData.Show".
Below is the Code for the form and also the Module: ....
On one laptop Excel crashes, without warning. It happens during copy/paste job (from one workbook to another). But not every time she copies something.
It is completly the same laptop like others in my company. My user has deadlines, and lot of copy/paste job.
Whenver I open the Excel App it crashes down ? Why ?
I Deactivated all the add ins, but the problem still exists.
Deleted the registery of Excel and un- install the Excel App then Re-install it again, but the problem still exists......
I wrote some VBA code detailed here. Is there any Excel Crash log I can look at? I have tested it on three computers. It worked on my computer just fine, but when testing it on the two other users of this spreadsheet it crashes when they click the mouse on a list box after about 5 to 10 clicks.
View 9 Replies View RelatedI have the following code that (should) either save the file with a generic name if a value exists in a certain field, or else save the file as the contents of the value in the field, with a message box appearing in either case. The problem is, the message box appears twice (not once) and then Excel crashes! Can anyone tell me what's going on? The code is:
Private Sub Workbook_BeforeSave(ByVal SaveAsUI As Boolean, Cancel As Boolean)
Dim FSR As String
FSR = Range("I7").Value
If FSR = "" Then
MsgBox "Service Report Number not entered."
ActiveWorkbook.SaveAs Filename:="Service Report Navilas.xls"
End If
If FSR "" Then
MsgBox "This action will save the file as the Service Report Number."
ActiveWorkbook.SaveAs Filename:=FSR & ".xls"
End If
End Sub
As I've learned to develop Excel apps with vba over the years I've noticed that, if the Excel app starts to get too large (over 1MB) saving it will often cause the application to crash for no apparent reason - the result being that I lose all the vba code I entered before the last save - with the worst case being that, on occasion I have lost all of the vba code in an applications!!!
So, I've learned to back up often using a third-party utility that I use to save my applications, which works wonders in allowing me to save my application without it crashing. The application is called Code Cleaner 97.exe. It was designed around Excel 97 (which I still use) but if possible I'd like to get an updated version for Excel 2003 and Excel 2007, which I also use.
Does anyone know of a more recent version of this utility, or another similar utility that allows large Excel applications to be properly saved, etc?
Code Cleaner 97.exe was a freebie that was available through one of the old Compuserve Excel forums. It was a very popular utility and was suggested as a means to save one's Excel apps without the app getting trashed, etc.
I'm not expecting a freebie solution so I'll gladly pay for something that allows me to save my large Excel apps without them crashing, etc.
I have a column of data that is an 850,000+ list of phone numbers. I need to peridoically insert another 10,000+ at a time and see if there are duplicates. Using conditional formatting to highlight the duplicates with a colored cell, and then sorting those records to the top is what I want to do, but it's too much for Excel to handle, and it hangs. It looks like I need to break up the 850k records into smaller chunks. Anyone know what an average pc with Excel 07 can handle? It's a 2.8ghz w/2gb ram.
View 6 Replies View RelatedWhen I run a group of macros for some reason after the marcro runs and I hit F2 excel crashes.
I have figured out that it is one of the marcros that makes the excel crash. It is only when I run the solver application. The code is below. Any thoughts why hitting F2 after running this marcro would crash the machine?
I have a very strange error at present. I am saving a sheet as a file using VBA from within Excel and when I run the program from the environment of my flash drive it works without a problem but when I run the same code on my main PC it causes an error :
Run time error 1004
Method SaveAs error ... and it causes Excel to crash and then recover the file.
The code that causes this is shown below : ....
I have created a macro in xl2000 which was working fine - although through corporate upgrades my machine has now been upgraded with xl2003 and the macro runs for a bit and then crashes on the code below, although it only highlights teh 'rnum'
rnum = ActiveCell.Row
Is there a difference between xl2000 & xl2003?
I open Excel. I click Insert-> Comment. Excel crashes. I try to open an excel file with comments, Excel crashes. I have already uninstalled and reinstalled, Detected & Repaired. Nothing appears in the event viewer. I am at my wits end.
Any ideas on what this could be? My only guess is a windows issue vs. an excel issue, but I thought I'd at least ask.
I have written a fairly large spread sheet, and I have consistently had excel crashes when the first form initialises at startup.
However if I resave the workbook over itself or sometimes as another name it will then work. Once it works - it will always work while I dont restart my computer. The next day the same workbook will crash on form startup. Once this happens t always crashes on startup. If it works OK first up it always works. However if I edit it the process may happen all over again. I am 100% their is no error in the code as in certain stages it has worked for months. It seams like some bug in excel?
Has anyone ever had this issue?
I run a macro which runs saves the active file to a different location to ensure that I retain the original like so -
If ActiveWorkbook. Name = "KEY_DATA_CFT77" + ".xls" Then
ActiveWorkbook.SaveAs Filename:= _
"H:HOME imcEXCELKEY_DATA_2006KEY_DATA_2006_01KEY_DATA_CFT77_01.xls", FileFormat:= _
xlNormal, Password:="", WriteResPassword:="", ReadOnlyRecommended:=False _
, CreateBackup:=False
End If .................................