Create A Drop Down List And Use Lookup To Get Corresponding Items
Nov 12, 2009
I am making a spreadsheet for food and calories, On sheet one i have a meal tracker, I want to have a drop down list in colum 1 that references the food list on sheet 2, column A=food, column B=Protien, column C=Carbs, column D=fat. The values from Sheet 2 columns B-D would then be inserted into Sheet A in the respective slots. I have fiddled with vlookup and tried numerous things but I can't seem to figure this out.
View 3 Replies
ADVERTISEMENT
Jan 25, 2010
In Column A I have a list of Products and in Column B is the list of corresponding prices. I'd like to create a drop down list with the items in Column A that would automatically fill-in the pricing from Column B next to it. I've tried using an IF statement, but my product list is too long.
View 5 Replies
View Related
May 10, 2014
Drop list. First of all I have sheet with all my data and i have define the name of each table.
I have about 15 categories table and a table with min 2 and max 100 items in each category.
I have made in a different sheet a drop list for my categories. Near this list i made another drop list with the items by using the formula =indirect() to arrange my items by categories.
The problem that i have is:
- Some categories they have many items and is difficult to find some items. i need to put a formula to put some letters and find what i need easily (easy searchable).
View 1 Replies
View Related
Mar 17, 2007
I Attached a sheet for what i'm asking about ,, i sent it before but the sheet showing it more clearly
View 10 Replies
View Related
Feb 20, 2008
I am working on a worksheet. I have the first tab at the bottom and that sheet contains all my data, and the additional tabs moving on the bottom are portions of that data for clarity. What i have on the primary sheet is 5 columns ( Name(A), Total(B), Tax(C), Amount(D), Date(E)) and being the master lists everything. I can add a filter to choose the name i want and naturally that only shows the relevant data for that name. What i want to do on the second tab along the bottom which is only relevant for the name i have chosen, their own sheet if you like is to be able to extract the data from the master sheet on a periodical basis. For example I have the same data that i need to show (including some additional stuff that manually include) and i will need to include Total, Tax, Amount and Date columns. What i want is to be able to have a drop down list in the cells below the Date column so that when i select the date it automatically completes the Total, Tax, Amount information that is shown on the primary sheet. So Total will be A column through to Date in D column and changing the date in column D will populate A to C with the data automatically.
View 9 Replies
View Related
Dec 11, 2008
I do not know how to create a drop down list to ensure the user inputs only the values from that list. Once I figure this out I would love to add a drop down calender for a cell as well.
View 14 Replies
View Related
Nov 16, 2007
I am trying to create a quotation spreadsheet and want the drop down list to contain the materials but once a selection is made in the drop down list, i want other cells to be accordingly populated with data stored on another worksheet within the workbook.
The source of the drop down list is material and i need other cells to be populated with the adjacent data.
Here is a small list i have at present, which will be much larger when completed.
MATERIAL 20mm 30mm
Absolute Black £62.15£83.30
Absolute Black Premium£71.65£96.10
African Red £58.20£78.00
So if the selection in the drop down list is African Red then it should accordingly populate other cells with the values £58.20 and £78.00. Please help as i have tried many sources elsewhere but without any luck and this would be very benficial.
View 7 Replies
View Related
Apr 25, 2008
I'm trying to categorise a load of expenses against their appropriate budget and sub-budgets. I've got all the budget subcategories in separate dynamic named lists each headed by the main budget name. I want to be able to select the main budget name e.g. marketing or sales etc and then see, in the next column over, only the appropriate subcategories to select from e.g pick the appropriate dynamic list (I've used dynamic lists so I have some flexibility to add new categories at a leter date).
View 2 Replies
View Related
May 19, 2009
I would like to create a list with reference to IF (E1:E150=1) list F1:F150
No Blanks. Cells E1:E150 will be either a 1 or a blank.
The new list will be created in cells Y5:Y whatever. List will then become a drop down list.
I have created the list but it has blanks between names and I just want the names....
View 9 Replies
View Related
Sep 13, 2006
is it possible to create a list of parts from a selection in one drop down box
ie
i have 1200 parts with descriptions etc in list . using a drop down box i want to select and create a workto list.
ideally this list would start on another worksheet starting on row 10
View 6 Replies
View Related
Oct 19, 2006
I'm able to create a simple User form Drop-down list that references a cell range list. ( as a test for myself) I have 4 separate macros I would like to run individually. Rather than create 4 separate buttons, I'd like to be able to select each one via Drop-Down list.
View 4 Replies
View Related
Sep 5, 2007
I was wondering if there was a way to create a pop-up list to appear when a user selects a certain cell that would provide the user with a list of (in this particular case) inventory items. The user would select which items they require for the task at hand and the total $$cost of the items would appear in the cell once is is deselected.
View 4 Replies
View Related
Mar 2, 2014
I've created a range B3:B12 in which each cell returns TRUE of FALSE. There corresponding values are listed in C3:C12. I have the same thing again in D3:D12 and E3:E12. Checkboxes link to the TRUE/FALSE cells. Attached is a stripped down file to show this.
I want to create a formula that lists each item in the one cell (no spaces required inbetween) for use with a search. I know a long winded way to do this involving many IFs but any array will be much more tidier, thing is I hardly use arrays and have struggled with this one.
I'm thinking it will be along the lines of =IF(B3:B12="TRUE",C3:C12,"")&IF(D3:D12="TRUE",E3:E12,"") but exactly what it should be is beyond me.
EDIT: The original file attached was corrupt for some reason, the new attachedment is the same except instead of TRUE/FALSE cells I've set them to 'x' for quickness (lost my work...!).
View 3 Replies
View Related
Feb 12, 2009
I have a column that looks something like (it is VERY long and has over 20 different names):
abe
abe
abe
abe
ben
ben
ben
cat
cat
john
john
john
john
tex
tex
I want to create another column (automatically) that lists each of of those once:
abe
ben
cat
john
tex
Any idea of how I can do this automatically?
View 12 Replies
View Related
Oct 14, 2008
I have ranges that are named Math, Reading, Science. I would like to create a drop down list in validation that chooses the range based on a value in a particular cell.
View 4 Replies
View Related
Feb 18, 2010
I'm using dependent drop-down lists. In the first box the user can choose a color which drives a set of options in the second box. (e.g. User selects "Red" and in the second dropdown they can then choose "Red A", "Red B", "Red C", etc.). Right now, if you select "Orange", it will still show "Red A" from the previous selection until the user selects the dropdown in the dependent box to refresh the list of options. Is there a way to make it so that second dropdown box will default to "Orange A"?
I tried writing some code to do this, but I can't seem to make it work. I've attached my file.
View 7 Replies
View Related
Mar 19, 2007
I have seen it accomplished where all worksheet tabs are arranged in a drop down list, and was wondering how to make that happen.
View 6 Replies
View Related
Jan 29, 2008
My problem is i need to create a drop down box in excell, now i have a list of names,
Name 1
Name 2
Name 3
Name 4..........
I need all thos enames in a drop down list but i think i keep doing things wrong, I am doing it like this,
All names are in cells A23-A33, i have highlighted them and named them (Names) using the name box in the top left corner, i have then gone to Data, Validation, List, Then i have sourced it to "Names" and clicked ok, this is where my problem is. It Makes all the boxes for Name 1 - Name 10 Drop Down Boxes... And when i click on any of them it gives me a list of all the names, when i click on one of the Names that name appears in the drop down box but the original Name dissapears from the box completely!
Name 1
Name 2
Name 3
Name 4
Name 5..................
View 2 Replies
View Related
Feb 4, 2014
I am trying to create a drop down list so that when the user choose Option A, Outcome A populates the cell.
So for example, I am looking to show a list of all Grades within the company, when the user selects a grade, the salary is populated into the cell.
View 7 Replies
View Related
May 11, 2009
I have a spreadsheet called contacts which is as it says, I have another sheet called project management, I want to have a drop down list which refers back to the contacts spreadsheet, it this possible as they are two different files?
View 4 Replies
View Related
Oct 3, 2006
I have a list of jobs being displayed using the following code. All sheet names that start with AJ, CJ and PJ within the workbook are how the list is created.
Sub ListSheets()
Dim sht As Worksheet
Dim lRow As Long
Dim rCell As Range
With Sheet1
Set rCell = .Cells(2, 12)
End With
For Each sht In ActiveWorkbook.Worksheets
Select Case UCase(Left(sht.Name, 2))
Case Is = "AJ", "CJ", "PJ"
lRow = lRow + 1
rCell(lRow, 1) = sht.Name
Case Else
End Select
Next sht
End Sub
what i want to do is create a drop list within each job sheet within the workbook that will display the names of the jobs above. Now the thing is I cannot choose the range like normal from data - validation - list as I will not know how many job names will be displayed so I dont know how many cells to include in the range.
View 6 Replies
View Related
Jan 26, 2009
I need to create a 'sub' list from a drop down list.
I have 8 categories in a drop down list in column A, but i need column B to also have a drop down list of sub categories depending on what category is selected in column A.
And once column B is populated, i need column C to auto populate with a value. All data is stored on the spreadsheet.
View 9 Replies
View Related
Oct 31, 2013
This is what I'm trying to do:
1. When a user clicks on a Drop down box and selects "Add New", I would like a Macro to run
2. I want this Macro to open up a Dialog/Text box to say "Enter New Information" where the user can enter in some text
3. The text that is entered by the user into this box will be added as a new entry into the Drop down box selection
My VBA knowledge is still at a beginner's level and I know how to get a Macro to run based on a cell value. However I don't know how to create a Macro for the dialog box nor do I know how to create a Macro for updating the drop-down items.
View 8 Replies
View Related
Jan 21, 2014
Excel 2010. There is a limit to the usability of the
=INDEX($A$1:$A$1000,MATCH(0,COUNTIF($A$1:$A$1000,"<"&$A$1:$A$1000),0))
method. It seems like the limitation is in the Countif function going over 1000 (or some other size limit)
I have a list of ~1500 rows, of that there are approximately 55 unique items. Doing the unique array works correctly up until item ~40, upon which it fails by returning the 1st item only (for the rest).
Trying to debug, and pulling out the Match section, it functions up until 976 (that is
MATCH(0,COUNTIF($N$1:$N40,$C$3:$C$1500),0)
returns 976) anything after returns just 1 (1st item).
It seems to be a limitation on the text string size that COUNTIF can handle.
View 7 Replies
View Related
Mar 19, 2009
I'm trying to create a drop down list which returns values based on what has been selected in the previous drop down list in the adjacent cell, e.g. if 'Apples' is selected in the previous cell then you should only be able to select from 'Gala, Granny Smith', or if 'Oranges' is selected you should only be able to select 'Seville, Blood Orange'. Is there a formula which would do this, or can I use a pivot table somehow? I'm totally stumped.
View 2 Replies
View Related
Oct 26, 2009
I need to have a drop down list which displays a different set of values depending upon the value selected by a previous drop down list. ie. (drop down box 1)= x, y, z. (drop down box 2)= either x1, x2, x3, or y1, y2, y3, or z1, z2, z3. I can produce a single drop down box thats not a problem but linking several drop down boxes is beyond me .
View 4 Replies
View Related
Mar 16, 2012
I'm working on an invoice generator, and I want to add a "lookup by phone number" feature. I've got an invoice database with invoice info stored horizontally for past invoices. On a separate sheet, I want to be able to type in the phone number in range ("O11:Q11") and have a list of invoice numbers and dates matching that phone number appear in Columns R and S respectively.
Here is some workbook info:
Invoice generator is in 'phonelookup'
Invoice database is in 'invoice database' and the table is called CompInvoices
In CompInvoices, Invoice numbers are col1, dates are col2, and phone numbers are col7.
View 1 Replies
View Related
Feb 6, 2008
I currently have a drop down menu in one of my worksheets, in which I have several different text values entered. What I would like to do is link each of those text values to a numerical value, which would be entered in to another cell. So if I select "Option A" from my drop down list, and Option A is equal to 200, I want "200" to show up in another cell. If I select "Option B" from my drop down list, and Option B is equal to 400, I want "400 to show up in that same other cell.
View 4 Replies
View Related
Dec 9, 2009
I have a drop down box in column N, however I would like the options in that drop down box to change depending on what appears in column M.
If column M Says "Lapse" then I want one drop down box to appear in column N, If coumn M says "NTU" then I would like column N to show different drop down options.
View 12 Replies
View Related
Dec 26, 2013
I am wanting to create a list where I can select multiple items within that list and then print only those selected items. I have created something similar thru data validation, but I can't get it to print.
In addition, I would like to be able to subdivide the list into multiple categories, then select items from these multiple categories and print them.
View 3 Replies
View Related
