I am working on a worksheet. I have the first tab at the bottom and that sheet contains all my data, and the additional tabs moving on the bottom are portions of that data for clarity. What i have on the primary sheet is 5 columns ( Name(A), Total(B), Tax(C), Amount(D), Date(E)) and being the master lists everything. I can add a filter to choose the name i want and naturally that only shows the relevant data for that name. What i want to do on the second tab along the bottom which is only relevant for the name i have chosen, their own sheet if you like is to be able to extract the data from the master sheet on a periodical basis. For example I have the same data that i need to show (including some additional stuff that manually include) and i will need to include Total, Tax, Amount and Date columns. What i want is to be able to have a drop down list in the cells below the Date column so that when i select the date it automatically completes the Total, Tax, Amount information that is shown on the primary sheet. So Total will be A column through to Date in D column and changing the date in column D will populate A to C with the data automatically.
I am making a spreadsheet for food and calories, On sheet one i have a meal tracker, I want to have a drop down list in colum 1 that references the food list on sheet 2, column A=food, column B=Protien, column C=Carbs, column D=fat. The values from Sheet 2 columns B-D would then be inserted into Sheet A in the respective slots. I have fiddled with vlookup and tried numerous things but I can't seem to figure this out.
I am trying to create a quotation spreadsheet and want the drop down list to contain the materials but once a selection is made in the drop down list, i want other cells to be accordingly populated with data stored on another worksheet within the workbook.
The source of the drop down list is material and i need other cells to be populated with the adjacent data.
Here is a small list i have at present, which will be much larger when completed.
MATERIAL 20mm 30mm Absolute Black £62.15£83.30 Absolute Black Premium£71.65£96.10 African Red £58.20£78.00
So if the selection in the drop down list is African Red then it should accordingly populate other cells with the values £58.20 and £78.00. Please help as i have tried many sources elsewhere but without any luck and this would be very benficial.
I'm trying to categorise a load of expenses against their appropriate budget and sub-budgets. I've got all the budget subcategories in separate dynamic named lists each headed by the main budget name. I want to be able to select the main budget name e.g. marketing or sales etc and then see, in the next column over, only the appropriate subcategories to select from e.g pick the appropriate dynamic list (I've used dynamic lists so I have some flexibility to add new categories at a leter date).
I'm not including my spreadsheet because it has company information however, I will try to articulate my request as best I can. I currently have an Excel spreadsheet with about 20 worksheets, I would like to be able to click on the first worksheet, create a "Drop Down box" or "Data Validation" box or whatever I need to do to be able to view information in a range of cells on ANOTHER worksheet within the same workbook.
I've tried Data Validation, Drop Down Boxes, Define name ranges, all to NO avail. I'm missing a step somewhere, because I'm still not able to view the information on the first worksheet.
I'm trying to create a drop down list which returns values based on what has been selected in the previous drop down list in the adjacent cell, e.g. if 'Apples' is selected in the previous cell then you should only be able to select from 'Gala, Granny Smith', or if 'Oranges' is selected you should only be able to select 'Seville, Blood Orange'. Is there a formula which would do this, or can I use a pivot table somehow? I'm totally stumped.
I need to have a drop down list which displays a different set of values depending upon the value selected by a previous drop down list. ie. (drop down box 1)= x, y, z. (drop down box 2)= either x1, x2, x3, or y1, y2, y3, or z1, z2, z3. I can produce a single drop down box thats not a problem but linking several drop down boxes is beyond me .
I currently have a drop down menu in one of my worksheets, in which I have several different text values entered. What I would like to do is link each of those text values to a numerical value, which would be entered in to another cell. So if I select "Option A" from my drop down list, and Option A is equal to 200, I want "200" to show up in another cell. If I select "Option B" from my drop down list, and Option B is equal to 400, I want "400 to show up in that same other cell.
I have a drop down box in column N, however I would like the options in that drop down box to change depending on what appears in column M.
If column M Says "Lapse" then I want one drop down box to appear in column N, If coumn M says "NTU" then I would like column N to show different drop down options.
I have named six different sets of data with six different names. I have a drop down box that lists these six different names. When I select one of the names from the drop down box, I would like the lookup I have off of this to change to what ever set of data the drop down selection is referring to. Example: I have my first data set named "Data_A", next "Data_B", etc... When my drop down selects "Data_E", i would like my Hlookup equation to change to HLookUp(a1,Data_E,3,false). Is this possible, or am I doing something wrong?
I am trying to create a fairly simple spreadsheet with about 8 columns and about 400 rows. One of the columns features a drop-down list with about 8 or 9 different options. Dependant on which option is selected, i would like the entire row to change colour with that option.
For example: FAILED - whole row changes red SUCCESSFUL - row has no fill Tested - row changes to orange
I have two columns B and C - In column B are the names of people. (12 names in this list) and in column C is a number from 1 - 4 (each person is in either team 1, 2, 3 or 4)
I have a drop down list in Column A which links to a small table (1 2 3 and 4) so the user can choose which team. I need a formula to then list the members of that team, when it has been selected.
I was using a Vlookup command, but this only works for the first person on the list, if i drag the formula down, it is still the same person. I need to show a list of all the members of that team.
I'm trying to find out how I get a cell to automatically find a code based on the selection of a drop down menu. If drop down menu selction is Rent I want the cell to automatically find the code for rent 61100. It's a large selection that will grow alot bigger than it currently is so needs to also have growing room.? I can't seem to find any answers on here already that seem to work on this, (or understanding them is maybe my fault). I've attached the sheet
I am trying to generate a list based on the value of a cell. That list will then be used as the range for a drop-down list. Example: Cell A1 returns a value of 15 A drop-down list displays the values 1 through 15. Cell A1 changes to 20 Drop-down list displays the values 1 through 20. I assume I'll need a two-step macro to accomplish this but I can't figure out the logic to populate the drop-down.
getting a macro to dynamically assign a drop down box to a list of numbers?
Specifically, I have a list of numbers in column A, and I would like to dynamically (because the size of the column differs every time) add drop down boxes in column B so that a user may select different values in column A, simply by changing the drop down box value to "Selected"
This would this make it easier for collect all the "Selected" values and perform further analyses upon them.
I want to be able to lookup if anywhere in a cell contains a word from a list of words, and then provides an output.
Column G: VAT payment HMRC payment Pay VAT
I have a table on the side that shows: Column Y Column Z VATHMRC HMRC HMRC
ie. If anything in column G matches one of the words in Column Y, then output the Column Z. I have use a Vlookup that works for the first two, as VAT is the first thing, but dont know how to make it work if the key word is in the middle of the cell.
why my drop down list defaults to the middle of the list when first clicking on the arrow that opens the list? I created an alphabetical list of all US airports but when I open the list, it starts at "D" instead of "A" which is the top of the list.
I have a worksheet containing a list of states in column A and a list of companies in column B (along additional data in columns C-L). I want create a lookup formula on a separate worksheet where users can select the state from a dropdown menu and it will return the information from columns B-L for that state.
For example:
A B C D Alabama ABC Company Active Expires December 2009 Alabama 123 Company Expired Expired April 2008 Alabama XYZ Company Active Expires August 2009 Alabama Larry Company Expired Expired May 2006
How can I do this without losing my mind? I've tried various Index, Small and Match formulas and none of them work.
I'm trying to create a excel sheet which will automatically return a price based on a given width and drop value. Currently, I calculate the price manually by looking in a price book which has plenty of rows and columns and prices. I want to simplify this by simply entering the dimensions so it automatically calculates price based on the dimensions entered.
Below is the start of my worksheet. If I choose the exact sizes shown on the table, it will return a price, however if I choose a size that is not listed, I get an #N/A. Eg. If I choose 780 x 1500, it will return the price $179, but if I choose for instance 775 x 1490, it only returns #N/A, when I want it to still return the price $179.
My formula in K3 is =IF(AND($I$3>0,$J$3>0),INDEX($A$3:$F$8,MATCh(J3,$A$3:$A$8,0),MATCH(I3,$A$3:$F$3,0)))
I am making a workbook that populates most of the data off of a data sheet, but i need it to hide the 10 other sheets until they are needed. I was hopint there would be a way to hide all but the data sheet, then use either a drop down box or if necessary a checklist (NOT my first choice, but i'll do it if i have to) to select the sheets that the tech will need to print or e-mail. Is there a way to do this:
I am trying to create drop down boxes in a spreadsheet so I can create job sheets from them, I have a small business building cubby houses and I want to create a job sheet from a spread sheet that will have customer name - job number and so on thats the easy bit but I need to have a few drop down boxes so I can just click on what type of cubby they want from a list and what colour roof and what side door will be on and so on instead of having to type all this in for every job.
I need to create a 'sub' list from a drop down list.
I have 8 categories in a drop down list in column A, but i need column B to also have a drop down list of sub categories depending on what category is selected in column A.
And once column B is populated, i need column C to auto populate with a value. All data is stored on the spreadsheet.
i have a spreadsheet with several fields. i want to derive information from this data. i want to be able to control the output through the use of list/drop down boxes.
so the user will choose several criteria AND based on this criteria, the ouutput will reflect user requirements.
I have a workbook with around 35+ sheets on it and I was wondering if its possible if I could put these sheets in a drop down list in say cell A1 so it would be easier to navigate the sheets. Is this possible with out using VBA code if so how would I go about doing it?
I have a drop down list of shipping Companies. If the name of the company is not in the drop down list how do I allow the user to type in the name then have it save in the drop down list source?
I currently have a drop down list in sheet 1 and the list is being refrenced from sheet 2
Lets say the drop down list is for fruits and my current list in sheet 2 has 4 items Apple, Grape, Mango, Peach.
Now this is what I need :-
1 ) lets say a user wants to enter Orange (which is not in the list ) he can still do so by entering it manually into the cell.
2) Once Orange is entered which is not in the LIST in sheet 2 then that new name gets added to the LIST in sheet 2 so that next time that name appears in the drop down list automatically. eg Apple, Grape, Mango, Peach, Orange [ but Items should not get duplicated eg Apple, Grape, Apple, Mango, Peach, Apple
I have Excel 2003 installed on the companies computers. Many people use an Excel file and I am trying to make their work easier. There is on command which has a dropdown list made by me. What I would like to find out is that is there any possibility to make Excel help the user to choose from the drop-down list (the list is quite big). Is it possible to select a cell in this column and type in the cell and then Excel help the user. I mean (this list contains country names in abc order) if the user types S and W then Excel auto-corrects it to SWEDEN. Can this be done with Excel 2003?
I do not know how to create a drop down list to ensure the user inputs only the values from that list. Once I figure this out I would love to add a drop down calender for a cell as well.
