I have created a userform which searches from the data using the value that i put in text box.
E.g. if i put student i.d in textbox1 all other textbox show me the data like name contact detail etc.
But I want one more criteria. i want to add one more textbox to search for e.g either i put student i.d or locker no whereas right now i can only put student ID.
Im am trying to create a search marco button that allows me to search in multiple worksheets in one work book. I came across this CODE the first part of it works. It pops open user input box and ask for the word that i would like to search but the this error message pops up Runtime error1004 Method 'range" of object'_Global'failed and i dont know what to do
Private Sub SearchButton_Click()
SearchString = InputBox("Enter Search String", "Search")
If SearchString = "" Then Exit Sub
For Each c In Range(myRange)
If InStr(LCase(CStr(c)), LCase(SearchString)) Then
[Code]....
I have a workbook with many many sheets in it. The first sheet contains a single column with about 10,000 different values. I'd like to use each of these as search criteria against ALL data in the other sheets (of which there are a good 50 or so). If matches are found (they don't have to be exact case), then I'd like two things to happen:
1. The rows containing the matched search criteria in the first sheet are highlighted.
2. In the cells adjacent to the search criteria in the first sheet, hyperlinks to the matched data are created and named after the sheet upon which this matched data appears.
I've attached a sample file to this post with ideal sample 'answers' to queries made of the first 2 terms.
Every new file I create is named with a sequential reference based on some criteria:
PackageName_(Place+SequentialNumber).
So, in my worksheet I have several columns with package names: LABK, LAVO, LACR… and on the rows I have the file names.
I have this UserForm I created Search.JPG
Basically (despite I imagine it’s not that simple), when I type the package name and the place as follows, for example
Package = LABK
Place = SAO
After clicking on “Generate” button, it should look for all file names containing LABK and SAO, verify what the last sequential number is (highest/MAX) and generate a new one in the text box below the button.So, if the last file name is LABK_(SAO005), it’ll generate a new one as LABK_(SAO006).
I created a userform for a giant spreadsheet with tons of data in it. There are three criteria. I created two command buttons - one that's "search" and one that's "close." The close works fine, but I don't know enough to program the "search" command. I'd like it to pull all data that matches the three criteria - rows H, D and M. So, if you answer all three, the macro will pull the rows of data that matches and paste it into another workbook (that opens in another window).
I'm not sure userforms are typically used for this sort of thing...
I have a workbook with many, many worksheets. On each worksheet there is a column called "Cost Code". I need a Macro to locate all like "Cost Code" values and extract data from several cells along that row. Macro would then tally the values from all those like cells on numerous worksheets and place sum on a seperate worksheet in the same workbook, on a "Totals" worksheet page.
For instance -The "Cost Code" value Macro to look for is 1000. This value is located on several worksheets. For every instance of "Cost Code" 1000 Macro is to find value of "Material Costs" in that row (always column M) and value of "Labor Hours" in that row (always column P). Macro would tally all "Material Costs" for "Cost Code" 1000 and put that sum on a "Totals" worksheet page in a specified cell. Macro would do the same for all "Labor Hours" for "Cost Code" 1000.
I am having such a difficult time creating a macro that will reduce the 5+hours I have to spend each week manually copying & pasting all of this data. I making an IMMENSE difference in this worker bee's life!
I have a workbook with two sheets (Sheet1 & Sheet2). Sheet1 has license #'s in column A and the state that the license belongs to in column B like this:
COLUMN ACOLUMN B11111Alaska11112Alabama11113Arkansas11114Arkansas
Sheet2 has three columns. Column A has the license #'s, column B has the state that the license belongs to and Columns C shows a line-of-authority tied to that license #.
COLUMN ACOLUMN BCOLUMN
C11111AlaskaProperty11111AlaskaCasualty11112AlaskaLife11112AlaskaHealth11112
AlabamaProperty11112AlabamaCasualty11113ArkansasLife11113ArkansasHealth11114
ArkansasLife11114ArkansasHealth12345ArizonaProperty
I'm trying to write a macro that will compare the license # and state in Sheet1 to the license # and state in Sheet2. If it matches, append the contents of Column C to the corresponding row in Sheet1.
Here's the thing...Sheet2 contains the entries for all licenses in the company (so this table is HUGE). And there are multiple entries for each state license # (notice how there's two entries above for AK license # 11111 - one for the Property line and one for the Casualty line.
After my macro is run, I want Sheet1 to show all the lines-of-authority on a single line. So if I ran my macro on the above example, after it's run I would have this in Sheet1:
COLUMN ACOLUMN BCOLUMN
C11111AlaskaProperty Casualty11112AlabamaProperty Casualty11113
ArkansasLife Health11114ArkansasLife Health
I am trying to search for multiple values in a cell with Multiple criteria.
E.g: Please find attached the sample excel data.
I tried using VLOOKUP which is not working as I am having multiple values in column A.
I have a spreadsheet with a database search function incorporated. Whilst this works fine, I was wondering if there is a way to combine the current single query searches into one search macro. I have setup a userform called CriteriaSearch that I would like to use to search my database tab. An example search would be:
User requires someone who speaks French (5), is female, has a rank of 3, is available immediately and has notes/keywords/keyphrases of "excellent linguistic and cultural knowledge". The appropriate fields on the userform are populated accordingly. The user selects search and a macro runs to find matching records. To make things slightly easier, the criteria (Language, Gender, Rank etc) all have fixed column references.
I am looking to search in a table (say 4 columns) corresponding to multiple criterion (one for every column except fourth) and returning the values which are numerous (from column 4). I have tried the INDEX function but it only gives me one of the many cells. I am working on a table with +20000 cells per column
View 3 Replies View RelatedI need a formula that will tell me what Tracking # in the spreadsheet has multiple dispositions and what those disposition are. I need the formula to use column and cell coordinates and not using word searches.
example
Tracking # Req.# Disposition
1490069 045 snakes
1015907 047 candy bars
1488026 044 chickens
1015907 047 sand paper
1015907 001 fruitcups
1490129 046 cupcakes
1484817 043 Cats and dogs
I want to display multiple results based on 2 search parameters, where by when I enter flight number and Dep. Airport it matches the trip numbers and dispalys all the rows matching all flight number and Dep. airport based on the unique trip number.
Notice: - one trip number could consist of multi flight sectors.
1) Explanation of the data :
MMM1805 = flight Number
935 = dep. time
$AS41 = registration code
[Code].....
On my spreadsheet i want to find the results from 2 criteria that i entered.
My search criteria are "Oostbos" and "AA8", and excel has to find this from another spreadsheet that i made for rostering.
OostbosN3 evelineAA8N3 evelineAA8N2 MargaAA7
The problem is that i have multiple shifts with the "AA8" criteria, but my function only finds the first one.
I used the following function:
Code:
=IF(C8="";"";INDEX('Afdeling PG PH'!$A$6:$A$28;MATCH(C8&$A$7;'Afdeling PG PH'!$B$6:$B$20&'Afdeling PG PH'!$AI$6:$AI$20;0)))
Also when the AA8 cel is empty that i doesn't show anything.
How the second N3 eveline, shows the 2nd result and so on.
An example of my data is:
Column A Column B Column C
ABC DEF Answer 1
ABC GHI Answer 2
ABC JKL Answer 3
I need a formula that checks both column A for text (ABC) and column B for text (JKL, two different criteria) and give 'Answer 3'. There will a lot of data and it will not always be the bottom answer.
I have thought about recording a vlookup but this might be messy and prone to errors. Is there anyway to search through multiple sheets for a value (code) in Col A sheet 1. And return X in sheet 1 in the next column.
View 2 Replies View RelatedI'd like to extract the data from Sheet 2 (Data) that falls within the selected date range but the formula I've entered in F$9 (see below) is giving me an error
=IF(ROWS(A$9:A9)>$A$5,"",INDEX(Data!A$2:A$387,SMALL(IF((Data!$A$2:$A$320>=$A$2)*(Data!$A$2:$A$320<=$B$2)*(Data!$B$2:$B$320=$C$2),ROW(Data!$A$2:$A$334)-ROW(Data!$A$2)+1),ROWS(A$9:A9))))
test1.xlsx
I have been working on a variation of this for a long time and I cannot get it to work.
I am trying to depending on the textbox selection get the proper ROW from DEALLIST to show up.
I have 2 columns ,A and B, in a table and text strings in C. Each table row A1 and B1 needs to be compared and matched with the text string C:C. Only if both, A1 and B1, are found in the same string, say C5, it has to return A1&B1. If not, return "Not Found".
Several Obsticles:
1. A and B are text and number
2. C is text with different numbers saved as text and words all mixed up
3. There is no defined format for the text, it is different in each string
A
B
C
-500.000,00
Banana Apple
Data: 1 MANGOGrape 0000000 800,000.00 EUR something something
-800.000,00
Mango Grape
Something your Ref: 8750ours R ef: TG0PPM000000743 500,000.00EUR zu Gunsten Banana Appl e VVA
With all these different formats and inconsistency, is it even possible?
I am looking to write a search function that searches through a whole document. The only examples I can find are of a could different search functions but they all are searching an specified individual column and even then I didn't really understand them. My worksheet has 6 different columns which are all different labels for a certain tool. I want the user to be able to input any of those 6 labels and have all the information in that row be returned.
View 4 Replies View RelatedI've been trying to code this user form so that when the appropriate command button is pushed, the Inventory Number is populated the amount of times indicated by the "multiplier" number.
I haven't gotten very far successfully. Mostly runtime errors.
Here is a screen shot of my table, along with my non working code.
Private Sub cmdfront_Click()
Dim iRow As Long
Dim ws As Worksheet
Set ws = Worksheets("Scanned")
Would like to be able to use a vlookup formula that incorporates multiple search criteria. In C10, I have a specific rank listed. In C11, I have the supervisor listed. The formula needs to list the name of the agent in C12 based on the criteria in C10 and C11.
agent rank score supervisor
A B C D
1 leo 1 99 jim
2 bob 3 68 jim
3 sam 1 73 ann
4 tim 2 84 adam
5 alf 2 55 ann
6 dan 3 42 adam
7 will 2 79 jim
8 sara 1 91 adam
9
10 Rank: 1
11 Supervisor: adam
12 Agent: " "
I have a dataset which is dumped into my model every month. The Report tab is a "user form" whereby the user can select multiple search criteria. The dataset is then filtered according to the search criteria entered by the user.
Problem is, that if the user only selects 1 of 3 search criteria and the other 2 cells are left blank, the filter filters on these blank cells and doesn't retrieve any data. Any ideas how I can overcome this?
Sub PopulateReport()
Application.ScreenUpdating = False
Dim MyFilter1 As String
Dim MyFilter2 As String
Dim MyFilter3 As String
MyFilter1 = CStr(Sheets("Report").Range("C2").Value) ' convert cell value to string
MyFilter2 = CStr(Sheets("Report").Range("C4").Value)
MyFilter3 = CStr(Sheets("Report").Range("C6").Value)
Sheets("Waste").Select
Dim Rw As Long
Dim Rng As Range
Rw = Range("A65536").End(xlUp).Row
Set Rng = Range("A1:W" & Rw)
With Rng
.AutoFilter
.AutoFilter Field:=20, Criteria1:=MyFilter1
.AutoFilter Field:=2, Criteria1:=MyFilter2
.AutoFilter Field:=13, Criteria1:=MyFilter3
End With
how to display my excel worksheet using HTML maker as I've downloaded the software but have no idea how to use it!
Attached is a sample workbook, but essentially what I'm looking to do is automate the process of searching through a data set where the value of interest (in this case, names) often has multiple entries, with different values attached to each instance.
I would like to be able to get a list of all values in a given column that match a specific name in another column.
Currently I'm using a basic INDEX/MATCH search just to see whether the data exists at all, but that's only half of what I have to do here, and I'm totally stumped on how to get a comprehensive list of all matches.
For reference, if you look at the sample, what I need is a list of all values in the "CPT" column that match the name searched for in the first column.
The actual data set size is at most 3-400 entries, if that makes a difference in how to approach this.
CPT Sample Book.xlsx
Here is an example of the data I get each day Letter order granting Sabine Pass Liquefaction, LLC's et al 4/16/12 request to add an alternate water source etc under CP11-72.Letter order granting Cameron LNG, LLC?s 4/5/13 filing of a request to introduce natural gas or process fluids into the BOG Liquefaction Project under CP12-15.Letter order accepting NorthWestern Corporation's 8/7/12 submittal of revisions to its transmission planning process to comply with the Commission's June 8, 2012 Order under ER11-2932.Letter order approving Public Service Company of New Mexico's 12/7/12 filing of a joint Offer of Settlement with Navopache Electric Cooperative, Inc under ER11-4534 et al. How can I set up my spreadsheet and what formulas can I use to search and return a value for each text string based on the attached table (column B)?
E3a7qta.png
Rep Name is Column J Row 5. I need to find multiple columns based by the header which is row 5, if column range (j5:az5) is "Video - Actual" then copy column to sheet "Data", this needs to be repeated for about 8 more times for different criteria
Rep NameBundle - TargetBundle - ActualVideo - TargetVideo - ActualJoe, Jane
2.06.06.04.0Smith, John
7.010.02.06.0Tucker, Chris
19.039.05.017.0Sandler, Adam
15.011.06.010.0Iglesias, Gabriel
8.03.06.010.5Smith, Will
8.03.06.06.5Powers, Austin
10.025.07.09.0
I have a problem with vlookup, some of the items in the lookup array are not unique and vlookup gets confused with multiple matches, however if I can use a combination of 1st and second columns as the criterion then it would result in a unique match.
Problem is I don't know how to acheive this in vba (but I can with the worksheet formulas). (attached is a sample worksheet)
I am trying to formulate a commission form which looks up the name of the sales person and then displays a list of the deal names withing Q1.
View 1 Replies View RelatedI have created a spreadsheet that will show me where people are working on what day, etc. however i want to be able to filter by week to create a list of say 2 particuar shifts - in this case "syl ld" and syl n so that the spreadheet would show the people who are working these shifts and I could print out. I have tried Multiple Filters and Advanced search but cannot achieve what I require
View 3 Replies View RelatedI would like to perform a search on only the worksheets listed in a worksheet titled table of contents. I would like to use multiple criteria for this search and send only the unique results to a worksheet titled results. Each worksheet listed in the table of contents has a cell address for each heading that I would like to extract data from the same column. The attached workbook example shows the data that I would like to collect when I search for cells that begin with "AB" and cells that begin with "CD". I collected this data by copy and pasting all the data from each worksheet into the results page and then applying filters and advanced filter to remove duplicates. This method does not work well for the original workbook as the data is quite extensive.
Create_List.xlsx
Excel 2007, Windows 7.
Most details are shown in the spreadsheet below. I would like it to be dynamic because the quarterly and annual data dumps I'm working with are are hundreds to thousands of lines.
Have the list be sorted, which is a part of the first attempt, would be nice but is not necessary. At this point, just being able to generate the dynamic list would be fantastic.
Excel 2007ABCDE1product lines:consist of these product subtypes2Widget series:Widget.type1Widget.type23Fidget series:Fidget.type4Gidget series:Gidget.type1Gidget.type2Gidget.type356data dump of parts sold or used in repairs7product subtype repairedpart number
[code]......