I've been trying to code this user form so that when the appropriate command button is pushed, the Inventory Number is populated the amount of times indicated by the "multiplier" number.
I haven't gotten very far successfully. Mostly runtime errors.
Here is a screen shot of my table, along with my non working code.
Private Sub cmdfront_Click()
Dim iRow As Long
Dim ws As Worksheet
Set ws = Worksheets("Scanned")
I have a spreadsheet with 4 columns of information, then a column for a primary name, and then many columns of secondary names (with a different number of secondary names for each row).
For rows with more than 1 secondary name, I need to create a new row with a copy of all the columns up to the secondary name for each secondary name in the row.
A row in the spreadsheet looks like this:
data data data data PrimaryName SecondaryName1 SecondaryName2 SecondaryName3... SecondaryNameN
I need this row to be replaced by the following set of rows:
data data data data PrimaryName SecondaryName1
data data data data PrimaryName SecondaryName2
data data data data PrimaryName SecondaryName3
...
data data data data PrimaryName SecondaryNameN
Is it possible to use vba coding to create a pop up user form by clicking on a button in excel?
I want to create a pop up form that a user can fill out with fields for name and address information. Then click a button to save and close the form based on the last name field box.
I have created a userform which searches from the data using the value that i put in text box.
E.g. if i put student i.d in textbox1 all other textbox show me the data like name contact detail etc.
But I want one more criteria. i want to add one more textbox to search for e.g either i put student i.d or locker no whereas right now i can only put student ID.
I am a green as green can be beginner to VBA coding. My question is, I created a text box on my user form so the user can input a 'billing code' and when they hit submit on the user form, the vba will search the spreadsheet and land on the data entered in the text box.
View 3 Replies View RelatedIn my userform I have a lot of textboxes. When the user clicks "OK" the values of these textboxes are transfered to row 3 of sheet1.
For this I use some of the code below:
Code:
If NaamTextBox.Value = "" Then ActiveCell.FormulaR1C1 = " " Else: ActiveCell.FormulaR1C1 = NaamTextBox.Value
ActiveCell.Offset(0, 2).Range("A1").Select
If GroepComboBox.Value = "" Then ActiveCell.FormulaR1C1 = "" Else: ActiveCell.FormulaR1C1 = GroepComboBox.Value
ActiveCell.Offset(0, 1).Range("A1").Select
If TypeTextBox.Value = "" Then ActiveCell.FormulaR1C1 = " " Else: ActiveCell.FormulaR1C1 = TypeTextBox.Value
ActiveCell.Offset(0, 3).Range("A1").Select
If TypecodeTextBox.Value = "" Then ActiveCell.FormulaR1C1 = " " Else: ActiveCell.FormulaR1C1 = TypecodeTextBox.Value
This goes on for about 55 columns. Also, not every column is used as you can see in de code above.
It seems to me that this is not smart coding, so my question is: can you make this more efficient?
I did find some nice code with uses EmptyRow (find first empty row) but in my case it's always row 3 where de input is placed. After this row follows much more data.
I am writing VBA code to do the following:
IF A1 > 50 then print array C1:E7
I have this code and it works.
Single coding line into multiple using underscore
How can i break this up
I'm working on a complex spreadsheet and I'm working on a complex spreadsheet system for pulling and measuring data. My VB programming skills are about minimal/average, so you may see me on here asking various questions . In any case, what I'm trying to do is create isolation macros for "Kickback" data (erroneous). I'm trying to remove data with certain criteria and isolate it on a separate "kickback" sheet for one for taking a second look at. I've made the easy macro of creating a new spreadsheet:
Sub Create_Kicbacks_Sheet()
' Create_Kicbacks_Sheet Macro
' Creates "Kickbacks" sheet for invalid information.
Sheets.Add After:=Sheets(Sheets.Count)
Sheets("Sheet4").Select
Sheets("Sheet4").Name = "Kickbacks"
Sheets("Kickbacks").Select
End Sub
This coding works correctly. The problem area I'm finding is the sorting data. My goal is to look at Columns A and B for certain criteria and either leave it alone, move it to the "Kickbacks" sheet or delete (due to not being necessary in data calculations). Basically, here's a synopsis of what I'm looking for:
if Column A = Y and Column B = Mandatory -> Leave Alone
if Column A = Y and Column B = Best Efforts -> Move Row to Kickbacks
if Column A = Y and Column B = Empty Cell -> Move Row to Kickbacks
if Column A = Empty Cell and Column B = Mandatory -> Move Row to Kickbacks
if Column A = Empty Cell and Column B = Best Efforts -> Delete Row
Here's the code I have in excel (modified from one I found online)... Which only is doing some of what I want it to do:
Sub Moveto_Kickbacks()
Dim r As Range, LR As Long
With Sheets("Data")
LR = .Range("A" & Rows.Count).End(xlUp).Row
Set r = .Range("A2").Resize(LR - 1)
.Range("A1").AutoFilter field:=1, Criteria1:=""
.Range("B1").AutoFilter field:=2, Criteria1:="Mandatory"
[code]....
how to code to specify a cell in which to enter data into a spreadhseet, when the heading contains only one row.
In the attached example the headings contain multiple rows with merged cells, is there any way of overcoming this so that the entries are placed in the correct cells?
I am trying to create a drop down list from a named range that has duplicate names listed. I cannot delete any of the duplicate rows. Is there an easy way to create the list with each name represented only once?
View 14 Replies View RelatedI am using excel 2003 to count my inventory in the following manor:
I have a "database sheet" that is comprised of possible inventory SKU numbers.
I have a "scanned sheet" that lists all the SKU's that I have scanned in the warehouse
I have a "count sheet" that counts the number of times each SKU in the database appears in the "scanned sheet"
Am I going about this in the most efficient manor?
Question 2: Frequently, new Items appear in the warehouse that are not yet in my database. Is it possible to create a list of SKU numbers that do not have a match in the database? As it stands, any SKU numbers that are scanned but not already listed in my database - simply do not get counted.
I have a userform created to enter clients information which by submitting goes to sheet1 ..
Now the challenge is i want to make sure that no duplicate entries are entered thru userform.
And if duplicate company name is entered then all the client details of the other fields of the userform shall display the values of previous entry so that i can edit the latest changes to the sheet.
I created a UserForm to populate client billing info and job location info (so it's a two-parter). A clicked button will then populate a spreadsheet with all of the information. That part works fine.
When the client billing info is the same as their job info, I'd like to offer a checkbox that will populate the job info with the billing info rather than having to type everything twice (like you see on online billing and shipping orders).
I have a button on my userform that I would like to clear all entries in column B in a sheet called "6 Entries" when pressed
Is there a code for this ?
I'm trying to take a list of names from a worksheet and create in a userform a combobox that lists the names.
Private Sub Combo_Box_Leadoff_Click()
Dim counter As Integer
Combo_Box_Leadoff.Clear
For counter = 3 To 16
Combo_Box_Leadoff.AddItem Worksheets(5).Cells(counter, 2).Value
Next counter
In the properties window, I set the value equal to the first name in the list. The above code yields a combobox that is blank except for the value set in the properties window. When I do not set an initial value, I get a completely blank combobox. I'm pretty new to VBA, and I've manged to figure out all of the macros I need so far, but setting up the user form has proved surprisingly difficult.
I have a userform that I use for data entry with lots of combo boxes, list boxes and text boxes
One thing i haven't cracked yet is to check for duplicates against two matching fields
If a user (for example) enters 'SAB' (which will be stored in column A) and then 'UK' (which will be stored in column B) and there is already an exact match for both, then I need to inform the user that a matching record already exists
The following is OK: (the dots below are meant to illustrate spaces between the columns!!)
Col(A).....Col(B)
SAB........UK
SAB........USA
SAB........Italy
BUT, if a user then tries to enter:
Col(A).....Col(B)
SAB........UK
I need my userform to register a duplicate entry.
My sub routine is detailed below : .....
I've have been building a UserForm for data entry into a stock demands system. One of the data entry items is a text box asking the data-inputter to complete a field containing the items drawing reference from the technical manual. The field can be quite long, and is often repeated for multiple items within the same drawing. Unfortunately, a ComboBox item would be have far to many items to make it useful, and so the TextBox item was preferred for this task.
My problem is that I need the TextBox to be able to recall/remember previous entries that have been saved to the data sheet in the workbook and the UserForm is cleared and closed down.
I need the information that is entered in a userform to be sent to a separate worksheet. Each time a user fills out the form, I would like the information to be documented on the next completely open row (ex. first form goes in row 2 (column headings are in row 1), second form goes in row 3, etc.). I don't know a ton when it comes to VBA, but I believe I have the code figured out to search for the next open row. Column A will always have data in it.:
Code:
dim currentrow as range
set currentrow=Range("A1").end(xldown).offset(1,0).entirerow)
What I can't figure out is how to insert the information to the correct columns. Each column has a header to it, and I would like the data from the userform to be put in the relevant column each time it is filled out.
For example, if column A's header was "First Name" and columm B's header was "Last Name", each time the form is filled out, I would like the first and last name (which was entered in the form) to be inserted into those columns (with each form entry on a separate row).
I think there might be a way to use the intersect method to find the row/column combination I'm looking for, but I'm not exactly sure how to do it. Using the first name example from above, it would basically look for the intersection of "currentrow" and column A, and insert the value that is entered into the userform.
I have an worksheet with a UserForm. On this UserForm is a ComboBox with the RowSource set to a named range called lVender. This ComboBox is setup to post & sort new entries into lVender apon exiting the ComboBox.
If a mistake is made and it is not caught before exiting the ComboBox, then I need a way to remove the bad entry from the lVender list.
I have included a small sample to better show the problem.
I have a user form with 10 textboxes on and when you press the command button, VBA will send the values in each text box to a cell on the sheet. If a user only wants to enter one value, it zeroes all the others in that row!! Does anyone have any ideas please in very very basic lamens code!! It is only relating to the user form called "Figures1". I had an if command running in the "decweek1" modules, but it makes my procedure too long to do the same with the other one!
If you look at my code, you can see how unadvanced I am with this so really simple code would be gratefully received!! If anyone feels nice enough you could always write the code for this problem for me and send me back the workbook, however I don't expect anyone to do this!
It is too large to attach so it is here:-
[url]
Is there a way i could put a validation on a text box that doesn't allow the user to enter a value that already exists in a given range. The object being to avoid duplicate entries.
View 5 Replies View Related[URL] ......
In that file, you can see there is a list of somewhat similar data across 5 columns. Some of the entries are duplicates, some are different by only one character. What I want to be able to do is generate a list of all the unique rows of data, taking into account the data from ALL 5 columns. The list can be on another sheet or simply just further down on the same sheet, that doesn't matter too much.
I could do it if it were just one column of data, but struggling trying to do it with several columns.
I'm completely new with macros. I was wondering what you would need so that the information will automatically update itself onto a summary page. For example for entries on one worksheet to create a statement on another worksheet?
Example:
Asset Type
Description
Date
Amount
OA
[Code]....
The first entry doesn't have a date, because the asset type is classified as OA. (therefore an exception) Each of this information will be linked to it's own worksheet. For example, the OA entries would create their own sheet which will summed.
I have a large table of data covering 3 different companies and need to create a second table of data counting how many entries there are for each month in each company. This second table is to be used to create bar graphs and I am not using pivot tables as I cannot work out how to get the pivot table to insert months where nothing has happened. The attachment should make it clear
View 3 Replies View RelatedI need to convert data from column IDS into separate rows, all other columns need to stay in tact. There are several distinct patterns for the IDS column, main identifiers are always starting with FILER or TEAL and the trailing numbers behind it have no more than 6 digits.
BEFORE MACRO
ID
AREA
TYPE
CLASS
QTY
IDS
1
COAL
TYPE9917312
CLASS881345
2
FILER756911**/**FILER123188 ^** FILER877119*118
[Code] ........
AFTER MACRO
ID
AREA
TYPE
CLASS
QTY
IDS
1
COAL
TYPE9917312
CLASS881345
2
FILER756911
[Code] ......
What the MACRO would look like? This is for Excel 2010.
I am looking to split multiple different entries in a single cell into multiple columns and repeat this for all rows
Example (I have the below in a single Cell as column headers)
NCM Server Mgmt VLAN Site ID
Next Line down is the data (Each row in a single cell)
Enabled 10.10.10.0 50 TEST SITE 1
Enabled 10.10.20.0 50 TEST SITE 2
Disabled 10.10.30.0 50 TEST SITE 3
How I could achieve this as I have a number of projects where this would become useful
I know you can use delimiters but with spaces between the values I just can't fathom a way forward.
I am creating a rollup file from hundreds of excel files each has the same structure
Each file will have a dozens to hundreds of names and some files will share entries i.e Juan Alvarez might be in 10 different files
I need to create a unique numerical identifier starting at 0 for everyone based off there unique email address for each individual in the rollup file
So Juan Alvarez would need to be given the same numerical ID every time he showed up in the rollup
[Code] .....
Rollup. After filtering on "Name".
[Code] .....
I have column A and it has 1000 rows, every row has a number in it, from 5000 to 5200, meaning that some numbers are presented multiple times in column A.
I need to lose repetitions, so every number is in the the table only one time and then I need to convert this one long column into, for example, 9 columns, so there's no wasting of space and have only one column in every page, if printed out.
I'm trying to identify duplicates with a return of "True" or "False". The attached workbook has column F for results (to read PI2 A if in column L, PI2 B if in column R or Both), but I want to query if everyone in column E is in column L or is in Column R and if so which one.
View 3 Replies View Related