I'd like to extract the data from Sheet 2 (Data) that falls within the selected date range but the formula I've entered in F$9 (see below) is giving me an error
=IF(ROWS(A$9:A9)>$A$5,"",INDEX(Data!A$2:A$387,SMALL(IF((Data!$A$2:$A$320>=$A$2)*(Data!$A$2:$A$320<=$B$2)*(Data!$B$2:$B$320=$C$2),ROW(Data!$A$2:$A$334)-ROW(Data!$A$2)+1),ROWS(A$9:A9))))
test1.xlsx
Attached is a sample workbook, but essentially what I'm looking to do is automate the process of searching through a data set where the value of interest (in this case, names) often has multiple entries, with different values attached to each instance.
I would like to be able to get a list of all values in a given column that match a specific name in another column.
Currently I'm using a basic INDEX/MATCH search just to see whether the data exists at all, but that's only half of what I have to do here, and I'm totally stumped on how to get a comprehensive list of all matches.
For reference, if you look at the sample, what I need is a list of all values in the "CPT" column that match the name searched for in the first column.
The actual data set size is at most 3-400 entries, if that makes a difference in how to approach this.
CPT Sample Book.xlsx
I have been working on a variation of this for a long time and I cannot get it to work.
I am trying to depending on the textbox selection get the proper ROW from DEALLIST to show up.
Here is an example of the data I get each day Letter order granting Sabine Pass Liquefaction, LLC's et al 4/16/12 request to add an alternate water source etc under CP11-72.Letter order granting Cameron LNG, LLC?s 4/5/13 filing of a request to introduce natural gas or process fluids into the BOG Liquefaction Project under CP12-15.Letter order accepting NorthWestern Corporation's 8/7/12 submittal of revisions to its transmission planning process to comply with the Commission's June 8, 2012 Order under ER11-2932.Letter order approving Public Service Company of New Mexico's 12/7/12 filing of a joint Offer of Settlement with Navopache Electric Cooperative, Inc under ER11-4534 et al. How can I set up my spreadsheet and what formulas can I use to search and return a value for each text string based on the attached table (column B)?
E3a7qta.png
I would like to perform a search on only the worksheets listed in a worksheet titled table of contents. I would like to use multiple criteria for this search and send only the unique results to a worksheet titled results. Each worksheet listed in the table of contents has a cell address for each heading that I would like to extract data from the same column. The attached workbook example shows the data that I would like to collect when I search for cells that begin with "AB" and cells that begin with "CD". I collected this data by copy and pasting all the data from each worksheet into the results page and then applying filters and advanced filter to remove duplicates. This method does not work well for the original workbook as the data is quite extensive.
Create_List.xlsx
I am trying to search for multiple values in a cell with Multiple criteria.
E.g: Please find attached the sample excel data.
I tried using VLOOKUP which is not working as I am having multiple values in column A.
I can manage an array formula that returns a value based on a criteria. Simple. But I want to add in an additional couple of criteria. Now I'm stuck....
My sheet looks at a manually entered postcode, finds out what region this is in, and returns a list of postcode I have defined as being in that region. (So the postcode WF1 3JY would return a region of Yorkshire, and list postcodes of WF, BD, L, etc)
I also have a list of engineers, with a column for their home postcode.I want to be able to list all the engineers from my list whose home postcode matches any of the values on the already created list from the postcode and region entered. So far I have this, which finds me all the engineers for just one postcode area.
I have a table with column headings of product ID Numbers (eg.1111) and row headings of Store number (Eg.1) with data showing the time each product was last sold at that store, I need something to consolidate for each store which Product ID's were sold prior to 5pm and what time they were sold.
EG
Store 1 1111 16:40
2222 13:00
Store 2 1111 15:05
3333 16:50
I would like to be able to use the Vlookup function to return more then one value as a result of the criteria. I have a cloumn of dates that populates the X axis of a gantt chart with data whilst the Y axis will be populated by a site reference resulting in a program of work, the Y axis data is the result of a vlookup function. My difficulty arises however with multiple sites, for instance where two or three sites will be visited on the same day. The vlookup function will only return the first value it finds in a range to the formulated cell. The result being a missing site(s) from the gantt chart / work program. is it possible to return all values to a cell i.e. site1, site2, site3. using a vlookup or do i need to use another method of doing this?
View 2 Replies View RelatedI have encountered a situation where I need to essentially accomplish a reverse Vlookup (using index match) and return multiple values.
View 1 Replies View RelatedI have a workbook with many many sheets in it. The first sheet contains a single column with about 10,000 different values. I'd like to use each of these as search criteria against ALL data in the other sheets (of which there are a good 50 or so). If matches are found (they don't have to be exact case), then I'd like two things to happen:
1. The rows containing the matched search criteria in the first sheet are highlighted.
2. In the cells adjacent to the search criteria in the first sheet, hyperlinks to the matched data are created and named after the sheet upon which this matched data appears.
I've attached a sample file to this post with ideal sample 'answers' to queries made of the first 2 terms.
If I have a 'key' value in a cell in one sheet, i want to use that value to find the cell in another sheet containing the 'key' and return the row number of the cell, if more than one value then I would like to be able to loop through all the rows containing that 'key' value returning the row number of each hit, kind of a programmatic version of vlookup?
I have a spreadsheet that contains data for a fiscal year broken out by month and quarter. I want the formula to return the data from that month and use whatever the latest quarter is. For example in the data below:
If it has only pulled data only thru Q1 it would return Q1 for Jan-Mar, however once I have Q2 data I would want the formula to return Q2 for the months of Jan-Mar.
2013Thru Q1STOLISTOLIJan-2013STOLI BASE
2013Thru Q1STOLISTOLIFeb-2013STOLI BASE
2013Thru Q1STOLISTOLIMar-2013STOLI BASE
2013Thru Q2STOLISTOLIApr-2013STOLI BASE
2013Thru Q2STOLISTOLIMay-2013STOLI BASE
2013Thru Q2STOLISTOLIJun-2013STOLI BASE
2013Thru Q3STOLISTOLIJul-2013STOLI BASE
2013Thru Q3STOLISTOLIAug-2013STOLI BASE
2013Thru Q3STOLISTOLISep-2013STOLI BASE
2013Thru Q4STOLISTOLIOct-2013STOLI BASE
2013Thru Q4STOLISTOLINov-2013STOLI BASE
2013Thru Q4STOLISTOLIDec-2013STOLI BASE
2013Thru Q4STOLISTOLIDec-2013STOLI BASE
2014Thru Q1STOLISTOLIJan-2014STOLI BASE
I have a spreadsheet with 1,000 rows of data.
Each Cell in Column A has a different long text string.
I need to see which (if any) of 10 specific small text strings exist within each long text string. Depending on which small text string is found I want to return a 3 digit code. If no small text string is found I want to return "Not Found"
E.g.:
- Cell A2 contains "randomtext,randomtext,APPLE,randomntext"
- I want to see if Cell A2 contains any of the words APPLE, ORANGE, CARROT.
- I want to return "APP", "ORG", "CAR" or "Not Found"
Q: What is the most elegant way to accomplish this within a single formula that I could paste into each cell in Column B?
I use the following formula in excel 2007 (and it's working perfectly in 2007) but this formula does not work if I work with the same file in excel 2003 ...w why and what I have to adjust?
=IF(SUMPRODUCT(--(C5='sheet 2'!B:B);--(C13='sheet 2'!C:C);ROW(B:B))=0;"not found";INDEX('sheet 2'!D:D;SUMPRODUCT(--(C5='sheet 2'!B:B);--(C13='sheet 2'!C:C);ROW(B:B));1))
(I'm working with the dutch excel version so it might be that ";" must be ",")
I am having such a difficult time creating a macro that will reduce the 5+hours I have to spend each week manually copying & pasting all of this data. I making an IMMENSE difference in this worker bee's life!
I have a workbook with two sheets (Sheet1 & Sheet2). Sheet1 has license #'s in column A and the state that the license belongs to in column B like this:
COLUMN ACOLUMN B11111Alaska11112Alabama11113Arkansas11114Arkansas
Sheet2 has three columns. Column A has the license #'s, column B has the state that the license belongs to and Columns C shows a line-of-authority tied to that license #.
COLUMN ACOLUMN BCOLUMN
C11111AlaskaProperty11111AlaskaCasualty11112AlaskaLife11112AlaskaHealth11112
AlabamaProperty11112AlabamaCasualty11113ArkansasLife11113ArkansasHealth11114
ArkansasLife11114ArkansasHealth12345ArizonaProperty
I'm trying to write a macro that will compare the license # and state in Sheet1 to the license # and state in Sheet2. If it matches, append the contents of Column C to the corresponding row in Sheet1.
Here's the thing...Sheet2 contains the entries for all licenses in the company (so this table is HUGE). And there are multiple entries for each state license # (notice how there's two entries above for AK license # 11111 - one for the Property line and one for the Casualty line.
After my macro is run, I want Sheet1 to show all the lines-of-authority on a single line. So if I ran my macro on the above example, after it's run I would have this in Sheet1:
COLUMN ACOLUMN BCOLUMN
C11111AlaskaProperty Casualty11112AlabamaProperty Casualty11113
ArkansasLife Health11114ArkansasLife Health
I need one formula to copy and paste the checkcard data changing it from this "CHECKCARD XXXXXX5623" to "CHECKCARD 5623", but I need one formula to look for multiple known checkcard numbers. I will have more then one typically in the bank download so I need to search and copy at least two known numbers as shown below.
I am providing the formula that I am using right now, "=IF(ISNUMBER(SEARCH("5623",B3)),RIGHT(B3,41),"")" but it only works for one checkcard number? Also I don't really need to capture the DEBIT or CREDIT that will always be at the end, it would be redundant. If it's easier to write the formula including that data that is no problem. What I want to copy and move into an adjacent cell is in red.
Here is the source data:
Row 2 - SONIC DRIVE IN#1531 AUSTIN TXDEBIT FOR CHECKCARD XXXXXX5623 DEBIT
Row 3 - JASON'S DELI # 125 Q64 AUSTIN TXDEBIT FOR CHECKCARD XXXXXX9718 DEBIT
ok I have multiple columns where Col-A can have any number between 1 and 5. Col-B has a 3 digit number in it. i want to search all of column A and determine if there is a 1 in it, if so i want it to print the value of col b into a specified area.
here is an example of my form.
COLA | COLB |
--------------
1 | 324 |
--------------
2 | 325 |
--------------
1 | 327 |
---------------
this is basics, i will be using this to search col-a, determine what number is in the column, then print the number found in col b, on another page in a specific place, on the other page i have squares labeled 1-50. in a grid pattern, 10 squares per row. im trying to get all the entries in col-a, that are a 1, to put whatever value is in col-b in the first box of the grid, whatever is found in col-a with a 2, the value found n col-b of that row, into the grid box labeled 2 etc......
I have a spreadsheet containing several names. I want a formula or macro that will search a string of text within the cell. If the text exists within the cell, I need a code to populate. For example,
In cell E2, search for a phrase anywhere in the cell that contains "COM". In cell H2 look for the exact phrase "ASB". When "COM" is found in E2 and "ASB" is found in H2, in cell U2 return the value "COM ASBTVL".
In my case, E2 may not contain "COM", it may contain "DEN" instead. In that case, if E2 contains "COM", and if "H2" contains "SVC", then in U2 populate "COM APPSVC"
I'm guessing in my code I will need to list a set of criteria that will search row by row and return certain values when finding the text I specify.
Would a macro be best for this? Does anyone know how I would put that together?
I have a workbook that has rows of data starting at A5:G5 seperated in groups of 25 rows.
Example: A5 is numbered 1 and A6 is 2 A7 is 3 and so on to 25 then skip a row and start numbering again to 25.
What this is for is employees are placed in groups of 25 to be eligible for an award for safety.
What I want to do is Range G5:G650 is to be a place where an "X" is placed beside an employee who has had an accident then Range H5:H650 would return "Employee had an accident" I already have this part working.
Then I want to code a subroutine that would search for the "X's" and return the entire row data for each name in that group of 25 on a seperate worksheet.
This would then be printed so we would know which group's to exclude.
I know how to make it return the row of data containing the "X" but how can I make it grab the entire group?
There will be multiple groups of 25 each and each time an "X" is found within a group create a new worksheet for that group.
650 employees / 25 = 26 groups
Ok, imagine this data (say column A). I want to have a cell that automatically searches for the least value (will always be the first number from top) and returns it in another cell. And then repeat the same for the second number from the top.
Beg Search STA
-
-
300
-
-
1050
-
-
2200
I have a bunch of quotes in Excel format which have 5 columns ; Part number, Description, Qty, Cost, Total Cost, Unit List,Total List. I need a piece of code to open many excel files, look for a "part number" beginning with ED,DS,AP,MP or MDS and return the corresponding value in the "total cost" column then record the value in a separate spreadsheet.
View 2 Replies View RelatedI am trying to add up all values from the cell above the search criteria. Although sumifs does work well, it wont search the entire sheet, it only works in specified rows.
Also, the problem is that the values to be added are determined via a vlookup based off of a cell whose value is chosen by a drop down choice.
I am trying to look & match key values from 2 areas of one table with two areas of another table; in turn, it'd return one value based on the lookup table...
Attached worksheet : Test booklet.xlsx
I have a spreadsheet with a database search function incorporated. Whilst this works fine, I was wondering if there is a way to combine the current single query searches into one search macro. I have setup a userform called CriteriaSearch that I would like to use to search my database tab. An example search would be:
User requires someone who speaks French (5), is female, has a rank of 3, is available immediately and has notes/keywords/keyphrases of "excellent linguistic and cultural knowledge". The appropriate fields on the userform are populated accordingly. The user selects search and a macro runs to find matching records. To make things slightly easier, the criteria (Language, Gender, Rank etc) all have fixed column references.
Im needing to search through the attached document which is truck logs at a mine and use vba to search through the list for each of the different shovels eg SHVL1, SHVL2 & SHVL3, and when the code finds that string, to display the tonnage 2 colums back from it. Im about half way there a i think but am having trouble with strings, if it was numbers i could do it no problem
View 11 Replies View RelatedWorksheet 1: In column A I have a people's initials. In coumn B I have text boxes with miscellaneous text. (The same person could have multiple rows within this sheet.)
e.g.
AAA blue
BBB orange
AAA round
CCC smelly
AAA elongated
Worksheet 2 I want to show:
A2 = initials, B2 = first text box associated with that person, C2 = second text box (different row) associated with that person (if applicable), D2 = third text box (different row) associated with that person (if applicable), etc.
e.g.
AAA blue round elongated
BBB orange
CCC smelly
I am working with a macro into which you input a date, the macro searches for that date (in column D of the data sheet), then copies any row with that date onto a new sheet.
This works great, but now I need to be able to search for more than one date at a time and return any rows that cantain ANY of those dates. For example, I would want to search for any row containing 01/01/07 - 01/07/07 or any row containing 01/01/07, 01/02/07, 01/03/07...01/07/07.
I am looking to search in a table (say 4 columns) corresponding to multiple criterion (one for every column except fourth) and returning the values which are numerous (from column 4). I have tried the INDEX function but it only gives me one of the many cells. I am working on a table with +20000 cells per column
View 3 Replies View RelatedI need a formula that will tell me what Tracking # in the spreadsheet has multiple dispositions and what those disposition are. I need the formula to use column and cell coordinates and not using word searches.
example
Tracking # Req.# Disposition
1490069 045 snakes
1015907 047 candy bars
1488026 044 chickens
1015907 047 sand paper
1015907 001 fruitcups
1490129 046 cupcakes
1484817 043 Cats and dogs