I am asking for help with the program Crystal Ball. Basically what I need is non repeating assumptions. I have a roughly 10 assumptions and they are all uniform discrete distributions between 1 and 10 but I need to make sure that if assumption 1 chooses say number 3 that no other assumptions chooses that number and thus all the numbers are used for each simulation.
View 9 RepliesI am trying to automate a simulation with the crystal ball add-in. Specifically the simulation will go through a set of workbooks in a directory - run the simulation (monte carlo x1000) and extra the "trial values" data in another spreadsheet.
I have tried to find crystal ball documentation but I'm not having any luck.
I use excel pivot tables a lot for most of my information gathering for reports that I produce. Problem I keep running into is the 64k row limit. I work with up to 200K rows of excel data at a time and just need to pick out a summary of certain columns. I have read (mostly adverts) good things about crystal reports and have been considering giving it a try. It will be a steep learning curve for me, but I was wondering have this group any views on the program before I splash out on books, DVD courses etc.
View 6 Replies View RelatedI have a complex workbook that now requires me to use different assumptions based on the label of the assumption (a "year" label) and the relevant year of the month in question (probably using the "Year(A1)" function. However, I do not know how to write a formula that will change assumptions based on whether the year of the relevant cell matches the year of the relevant assumption set. I attached a super-simple spreadsheet as a sample.
View 3 Replies View RelatedI am finding a formula for the following problem (vlaue in A3 is variable):
B3 cell definition
1/ if A3<=A2, then choose value in B2
2/ if A3>A2 and A3>A4, then "(B4-B2)/(A4-A2)*(B3-B2)+B2"
3/ if A3>A4, then choose value B4
sorting data I use in a workbook for athletics. I've really chopped down my workbook for upload, In the worksheet "Leaderboard" I can call up stats for different lifts, and it finds (in this case) the top 5 lifts and the names for the kids that have those corresponding lifts.
My problem is that when two or more kids have the same lift, it will only call up the name of the first instance of that lift. You can see this in the "Leaderboard" worksheet, and the name "Adams, Andrew" appears for both lifts of 75. I would appreciate any help on how to correct this, as I've searched the Internet for weeks now looking for a solution. I've tried experimenting with different things as well, all to no avail.
organising a golf tour for 32 players.playing in teams of 4 (4 Balls) for 4 games of golf and the teams are to be randomly selected such that no player plays in a group with a person he has played with in a previous game. finding it difficult to create a spreadsheet which meets this criteria.
need to build into the spreadsheet the fact that the variable mix of people is constrained by the fact that at least 4 persons have to use a buggy (which will have 2 people in it) and as the tour progresses and courses become physically demanding a number of people (N) for the last 2 rounds may also ask for the use of buggies as well.develop a spreadsheet to make the 4 Ball team selections.
I have a double-reference formula, that refers to an assumptions table. The table would be referenced based on a) the product name, and b) the year of the month that is being evaluated. For example, If I want the formula to reference the assumption for Product B in January 2015, then I would like to pull the Product B assumptions from the 2015 assumption list.
View 2 Replies View RelatedI would like to embedd a symbol into a cell. I dont want it to be done by using Fonts. By symbol I mean Harvey Balls (Plan, Do, Check, Act) symbol embedded the same as the "and" (&) symbol. I have seen it done once on a spreadsheet but did not get a copy and I would like to recreate it as a way of visually showing the status of an action item.
View 14 Replies View RelatedI have been able to export data from a Crystal Report into an Excel file. After exporting to the Excel file I copy a Macro that I wrote into the workbook that deletes blank lines. My question is: Is it possible to export into a workbook that contains macros without overwritting the entire workbook which wipes out the macros?
View 4 Replies View RelatedI had a matrix like this
0 4 0 0
1 0 0 0
0 0 0 2
2 3 0 0
then I used vba to put number between 1 to 4 (since this is an 4x4 matrix) when there is a 0 in the matrix, but the numbers in row need to be no repeat??
so i need something like this for my output. Is there any code for search the number in the row?? How can I do this??
1 4 2 3
1 2 3 4
1 3 4 2
2 3 4 1
I have several columns of data representing a shop operation along different years. Now I try to see how will it look like if I have 10 shops like this, all summed up. The problem is that each shop will have the same numbers as the other 9, just that it's first year of operation will be different.
Now, I don't want to have different sheet for each and every shop since their data is exactly the same. I only want to have 1 type of shop which I can add to a consolidated sheet but 10 times, and each time the first year shoud be different.
Just an example: If I have this data for my shop:
YR1 YR2 YR3 YR4
Sales: 10 12 14 16
Costs: 5 6 7 8
Operation: 2 2 3 3
Tax: 1 1 1 1
profit: 2 3 3 4
And lets say I have 4 shops opening in 2000,2001 and 2 in 2002 than my consolidated should look like this:
2000 2001 2002 2003
Sales: 10 12+10 14+12+10*2 16+14+12*2
Costs: 5 6+5 7+6+5*2 8+7+6*2
Operation: 2 2+2 3+2+2*2 3+3+2*2
Tax: 1 1+1 1+1+1*2 1+1+1*2
profit: 2 3+2 3+3+2*2 4+3+3*2
But again, I don't want to open a different table for each shop and than sum them up - I want to have only my one shop, and have a possibility to say when will I open my next shop and the consolidation will be automatically.
my document column "M" ,this type of numbers are there.
column "M"
125468A-B
125468A-B
458962
256897
412589A-C
412589A-C
412589A-C
01.i need to remove A-B,A-C part.
02.after that any number are repeating that all the number's end part should add (A,B,C,,,,)it's like this.....
[b]
column "M"
125468A
125468B
458962
256897
412589A
412589B
412589C
Okay, so this is what I am using:
[Code] .......
It is finding the name for a value from a table of values, the only problem is that there are more than one names which correspond to the same value. It doesnt matter to me which name it retrieves, but it lists the same name over and over again, where i'd prefer if it used a different name each time. Any way to keep it from using the same one?
Example1 (pcb).xls
What i need is that result of these counting is 2. Count all without repeating.
I need to find out how many different days are in these fields.
1.6.2009
1.6.2009
1.6.2009
1.6.2009
1.6.2009
1.6.2009
1.6.2009
1.6.2009
2.6.2009..........
it repeats by increasing range from RZ1 to RZ2, RZ3 till RZ50. For each of the range below calculation needs to be performed.
View 6 Replies View RelatedVBA code. My sales data is arranged as months in columns and customers in rows. I have about 36 months of data that must be formatted as a single date column for pivot table manipulation.
View 9 Replies View RelatedI am creating several worksheet where the first two rows are repeated so that I can see those two rows as I proceed down the sheet. That feature works on some but not all sheets. What am I missing? I even tried copying the pages that are correct to another worksheet and that format doesn't copy to the next worksheet.
View 9 Replies View RelatedI have the below macro that I need to have it repeat until the end of the data, I'm not brilliant with how macro's actually work,
Range("A2:Q5").Select
Selection.Borders(xlDiagonalDown).LineStyle = xlNone
Selection.Borders(xlDiagonalUp).LineStyle = xlNone
With Selection.Borders(xlEdgeLeft)
.LineStyle = xlContinuous
.Weight = xlMedium
.ColorIndex = xlAutomatic
End With
Suppose I have a following set of data in Sheet1...
FT 1
DD 2
MC 1
AD 1
EE 3
FL 2
GC 1
Under the first column, I have a series of text and under the second column, I have numbers, 1 - 4.
and I want the ouput from the data to be like
FT
DD
DD
MC
AD
EE
EE
EE
FL
FL
GC
in Sheet2, and the process will continue until there is a blank cell under the first column. Can someone help me with this? I have a very little experience in VBA.
How can I have a sub repeat itself? I have a code and I want it to ask the user at the end if they would like to do it again. If so the whole sub needs to be repeated. I'm sure this has something to do with looping, but I don't know how to manage this.
View 3 Replies View RelatedI have a list of colours from A1 to A10. This list may change, get longer or get shorter. In B1 I would like this list to repeat over and over again. but changes. I have attached the list in question, and what I would like it to do.
So to clarify - add a colour to Column A, it will add to the repeated list in Column B.
LISTA.xlsx
I have a spreadsheet in which data is dumped from a database, there is a dump (on a new tab) for each site.
I need a summary sheet which will add up the two tabs. My problem is however is that I can not use Vlookup as the same codes are used and it will only return the first occurrence.
e.g.
444588 Prime Wages/salaries
This code appears under Production prime labour and Distribution Labour but will only ever return the production prime labour value
Another example would be
444586 Ohd Wages & salaries
This code appears under Production Overhead, Site Overhead, Sales overhead and Admin Overhead this would only ever return the production overhead value only
Is there any way that I can get the summary sheet to use a formula where it looks up the department and then the code? I was thinking index and match but I was unsure if this was possible also.
Worth noting is that the summary sheet has a list of all codes that could be used but the dumps will only ever have values if a cost has been occurred, there for the number of rows in each department is not consistent. There will be a number of tabs however in the attached example I have only provided two.
Got a huge dataset with a list of non-repeating names. For example, among the dataset is about 1,500 names that dont repeat itself in a column. How can I isolate just that list of non-repeating names from that huge dataset?
View 4 Replies View Relatedrepeating the code on the same worksheet.
i am trying to input this code to my worksheet
I have some code that copies and pastes data from one cell into a range. The one cell is B4, and the range is A6:A10. This same action must be done every 30 lines (so the next time the cell is B34 and the range is A36:A40).
What do I need to do to make this action repeat/loop every 30 lines?
I have a list of energy consumption records by address. The utility that supplied the data had to manually pull each record one by one from their 'database'. If two individuals shared one account, the record is repeated.
So, I have a 500,000 row table with some records with identical addresses and identical consumption amounts. How would I go about separating the duplicates (to then delete them)?
It's sorted by address then consumption. The logic is...
if the address value in column A repeats and the consumption field in column B also repeats, then...(place a marker in column C so I can sort and delete)
I'd like to this number 48,267,135.91 to read as follows:
48,000,000
I tried combine both the substitute abd the Mid functions didn't work?
I have completed the first section of my spreadsheet.
Section 1 has a number of mandatory fields. Once these are complete and the user changes a combo box then Section 2 opens
I now want to repeat the same again for section 2. Making fields mandatory before a user can change a combo box to yes, which then opens Section 3
From looking around the forum / google I think I can only have one worksheet_change per sheet. If this is the case, how do I now start my next section (to basically repeat Section1 again)
The code I have is:
Private Sub Worksheet_Change(ByVal Target As Range)
If Not Application.Intersect(Range("E20"), Target) Is Nothing Then
'Section 1
Range("A22:A130").EntireRow.Hidden = True
[Code] ........
I have a file that I converted to excel and am trying to now convert from rows to columns. So far I have set up the code to do it 3 times but need it to repeat every 12 rows. Here is what I have so far:
Sub rowtocolumn()
'
' rowtocolumn Macro
[Code]....
Not sure what to do to make it repeat?