I have a list of colours from A1 to A10. This list may change, get longer or get shorter. In B1 I would like this list to repeat over and over again. but changes. I have attached the list in question, and what I would like it to do.
So to clarify - add a colour to Column A, it will add to the repeated list in Column B.
LISTA.xlsx
Got a huge dataset with a list of non-repeating names. For example, among the dataset is about 1,500 names that dont repeat itself in a column. How can I isolate just that list of non-repeating names from that huge dataset?
View 4 Replies View RelatedI need to make a list that has 90 people and each day I need it to pick 4 random people. I need it to keep rotating people daily for the entirety of the monthfrom the first day of the month without utilizing the same people over again. I not excel savy at all so I need it dummy proof
View 1 Replies View RelatedI have a formula-generated defined list of names. I need to select them in random order without duplication and without choosing any blanks in the list.
View 6 Replies View Relatedsorting data I use in a workbook for athletics. I've really chopped down my workbook for upload, In the worksheet "Leaderboard" I can call up stats for different lifts, and it finds (in this case) the top 5 lifts and the names for the kids that have those corresponding lifts.
My problem is that when two or more kids have the same lift, it will only call up the name of the first instance of that lift. You can see this in the "Leaderboard" worksheet, and the name "Adams, Andrew" appears for both lifts of 75. I would appreciate any help on how to correct this, as I've searched the Internet for weeks now looking for a solution. I've tried experimenting with different things as well, all to no avail.
I have a workbook where Sheet 1 Col A is a list of dates. Sheet 2 Col A is a relatively short list of constantly changing names. I need to put this list of names in a repeating fashion in Sheet 1 Col B. Ideally I would like for Sheet 1 to regenerate Col B each time the roster list is changed.
View 5 Replies View RelatedI need a formula that will add .1, .2, .3, etc. to a repeating list number. See the example below.
Project Work Id
8069000
8069000
8069000
8069000.1
[Code]....
I am using Excel 2011 on a mac. I have a selection of data that lists a repeating code (say group 1, group 2, group 3 etc)and a value (-1,-2.3,3,6 etc) and need to find a quick way group together all the codes and next to that a value that counts how many values who share the same code hold a value greater than -1? I can do this myself in a pivot chat with count totals but my issue is how I can show the number of codes greater than -1.
Attached is an example of the data I want to sort.
Example of data that needs sorting.xlsx
I have a list that I need to move to another column without spaces. I have it moving without spaces but it is only one item over and over again. I am using Excel 2010 and that may be my issue. I have attached the exact worksheet and formula.
To Buy List.xlsx‎
I have a 5 data validation lists on one sheet. They each have specific criteria referencing another sheet, but it only a small portion functions. I have an if formula for an hourly staffing report, that refereneces each indivual day in the week, but only works on sunday.
=IFERROR(IF('SCHEDULE WEEK ONE'!$J5="","",IF(AND(ISNUMBER(SEARCH($P$15,'SCHEDULE WEEK ONE'!$L5)),SEARCH($P$19,'SCHEDULE WEEK ONE'!$C5),SEARCH($P$23,'SCHEDULE WEEK ONE'!$E5),SEARCH($P$27,'SCHEDULE WEEK ONE'!$F5),SEARCH($P$31,'SCHEDULE WEEK ONE'!$G5)),(RIGHT('SCHEDULE WEEK ONE'!$J5,1))+0,"")),"")
I want it to pull a start shift time and end shift time to match the criteria. I have two columns that are one for start time, and end time and another thats combined. the one shown is combined. This one doesnt not pull the end shift time! Hopefully I explained this properly. Also should I use something other than data validation list?
I have a directory with over 100 .txt files. I want to open each file, parse the data and copy the data into a new file which has numerous formulas and functions to perform on the data. I have the code for doing all the work, but I have to open each file individually and run the macro. I would like to loop through all the files in the directory to perform the same fuctions. I need the looping code for getting the files from the directory.
View 4 Replies View RelatedI am aware of the following topic in the VBA Help file:
"Using Microsoft Excel Worksheet Functions in Visual Basic
You can use most Microsoft Excel worksheet functions in your Visual Basic statements. To see a list of the worksheet functions you can use, see List of Worksheet Functions Available to Visual Basic.
Note Some worksheet functions aren’t useful in Visual Basic. For example, the Concatenate function isn’t needed because in Visual Basic you can use the & operator to join multiple text values."
And I'm aware of how to call Excel funcitons from within VBA; e.g., answer = Application.WorksheetFunction.Min(myRange)
However, not only are some Excel functions not useful; the fact is they cannot be used because VBA has a native function that does exactly the same thing and you have to use that native VBA function to achieve your goal. It is these overlapping functions that I am especially interested in. I want to know what I should use directly in VBA and what I need to go to Excel for.
I had a matrix like this
0 4 0 0
1 0 0 0
0 0 0 2
2 3 0 0
then I used vba to put number between 1 to 4 (since this is an 4x4 matrix) when there is a 0 in the matrix, but the numbers in row need to be no repeat??
so i need something like this for my output. Is there any code for search the number in the row?? How can I do this??
1 4 2 3
1 2 3 4
1 3 4 2
2 3 4 1
I have several columns of data representing a shop operation along different years. Now I try to see how will it look like if I have 10 shops like this, all summed up. The problem is that each shop will have the same numbers as the other 9, just that it's first year of operation will be different.
Now, I don't want to have different sheet for each and every shop since their data is exactly the same. I only want to have 1 type of shop which I can add to a consolidated sheet but 10 times, and each time the first year shoud be different.
Just an example: If I have this data for my shop:
YR1 YR2 YR3 YR4
Sales: 10 12 14 16
Costs: 5 6 7 8
Operation: 2 2 3 3
Tax: 1 1 1 1
profit: 2 3 3 4
And lets say I have 4 shops opening in 2000,2001 and 2 in 2002 than my consolidated should look like this:
2000 2001 2002 2003
Sales: 10 12+10 14+12+10*2 16+14+12*2
Costs: 5 6+5 7+6+5*2 8+7+6*2
Operation: 2 2+2 3+2+2*2 3+3+2*2
Tax: 1 1+1 1+1+1*2 1+1+1*2
profit: 2 3+2 3+3+2*2 4+3+3*2
But again, I don't want to open a different table for each shop and than sum them up - I want to have only my one shop, and have a possibility to say when will I open my next shop and the consolidation will be automatically.
my document column "M" ,this type of numbers are there.
column "M"
125468A-B
125468A-B
458962
256897
412589A-C
412589A-C
412589A-C
01.i need to remove A-B,A-C part.
02.after that any number are repeating that all the number's end part should add (A,B,C,,,,)it's like this.....
[b]
column "M"
125468A
125468B
458962
256897
412589A
412589B
412589C
Okay, so this is what I am using:
[Code] .......
It is finding the name for a value from a table of values, the only problem is that there are more than one names which correspond to the same value. It doesnt matter to me which name it retrieves, but it lists the same name over and over again, where i'd prefer if it used a different name each time. Any way to keep it from using the same one?
Example1 (pcb).xls‎
What i need is that result of these counting is 2. Count all without repeating.
I need to find out how many different days are in these fields.
1.6.2009
1.6.2009
1.6.2009
1.6.2009
1.6.2009
1.6.2009
1.6.2009
1.6.2009
2.6.2009..........
it repeats by increasing range from RZ1 to RZ2, RZ3 till RZ50. For each of the range below calculation needs to be performed.
View 6 Replies View RelatedVBA code. My sales data is arranged as months in columns and customers in rows. I have about 36 months of data that must be formatted as a single date column for pivot table manipulation.
View 9 Replies View RelatedI am creating several worksheet where the first two rows are repeated so that I can see those two rows as I proceed down the sheet. That feature works on some but not all sheets. What am I missing? I even tried copying the pages that are correct to another worksheet and that format doesn't copy to the next worksheet.
View 9 Replies View RelatedI have the below macro that I need to have it repeat until the end of the data, I'm not brilliant with how macro's actually work,
Range("A2:Q5").Select
Selection.Borders(xlDiagonalDown).LineStyle = xlNone
Selection.Borders(xlDiagonalUp).LineStyle = xlNone
With Selection.Borders(xlEdgeLeft)
.LineStyle = xlContinuous
.Weight = xlMedium
.ColorIndex = xlAutomatic
End With
Suppose I have a following set of data in Sheet1...
FT 1
DD 2
MC 1
AD 1
EE 3
FL 2
GC 1
Under the first column, I have a series of text and under the second column, I have numbers, 1 - 4.
and I want the ouput from the data to be like
FT
DD
DD
MC
AD
EE
EE
EE
FL
FL
GC
in Sheet2, and the process will continue until there is a blank cell under the first column. Can someone help me with this? I have a very little experience in VBA.
How can I have a sub repeat itself? I have a code and I want it to ask the user at the end if they would like to do it again. If so the whole sub needs to be repeated. I'm sure this has something to do with looping, but I don't know how to manage this.
View 3 Replies View RelatedI have a spreadsheet in which data is dumped from a database, there is a dump (on a new tab) for each site.
I need a summary sheet which will add up the two tabs. My problem is however is that I can not use Vlookup as the same codes are used and it will only return the first occurrence.
e.g.
444588 Prime Wages/salaries
This code appears under Production prime labour and Distribution Labour but will only ever return the production prime labour value
Another example would be
444586 Ohd Wages & salaries
This code appears under Production Overhead, Site Overhead, Sales overhead and Admin Overhead this would only ever return the production overhead value only
Is there any way that I can get the summary sheet to use a formula where it looks up the department and then the code? I was thinking index and match but I was unsure if this was possible also.
Worth noting is that the summary sheet has a list of all codes that could be used but the dumps will only ever have values if a cost has been occurred, there for the number of rows in each department is not consistent. There will be a number of tabs however in the attached example I have only provided two.
repeating the code on the same worksheet.
i am trying to input this code to my worksheet
I have some code that copies and pastes data from one cell into a range. The one cell is B4, and the range is A6:A10. This same action must be done every 30 lines (so the next time the cell is B34 and the range is A36:A40).
What do I need to do to make this action repeat/loop every 30 lines?
I have a list of energy consumption records by address. The utility that supplied the data had to manually pull each record one by one from their 'database'. If two individuals shared one account, the record is repeated.
So, I have a 500,000 row table with some records with identical addresses and identical consumption amounts. How would I go about separating the duplicates (to then delete them)?
It's sorted by address then consumption. The logic is...
if the address value in column A repeats and the consumption field in column B also repeats, then...(place a marker in column C so I can sort and delete)
I'd like to this number 48,267,135.91 to read as follows:
48,000,000
I tried combine both the substitute abd the Mid functions didn't work?
I have completed the first section of my spreadsheet.
Section 1 has a number of mandatory fields. Once these are complete and the user changes a combo box then Section 2 opens
I now want to repeat the same again for section 2. Making fields mandatory before a user can change a combo box to yes, which then opens Section 3
From looking around the forum / google I think I can only have one worksheet_change per sheet. If this is the case, how do I now start my next section (to basically repeat Section1 again)
The code I have is:
Private Sub Worksheet_Change(ByVal Target As Range)
If Not Application.Intersect(Range("E20"), Target) Is Nothing Then
'Section 1
Range("A22:A130").EntireRow.Hidden = True
[Code] ........
I have a file that I converted to excel and am trying to now convert from rows to columns. So far I have set up the code to do it 3 times but need it to repeat every 12 rows. Here is what I have so far:
Sub rowtocolumn()
'
' rowtocolumn Macro
[Code]....
Not sure what to do to make it repeat?
