I have a file that I converted to excel and am trying to now convert from rows to columns. So far I have set up the code to do it 3 times but need it to repeat every 12 rows. Here is what I have so far:
Sub rowtocolumn()
'
' rowtocolumn Macro
[Code]....
Not sure what to do to make it repeat?
sorting data I use in a workbook for athletics. I've really chopped down my workbook for upload, In the worksheet "Leaderboard" I can call up stats for different lifts, and it finds (in this case) the top 5 lifts and the names for the kids that have those corresponding lifts.
My problem is that when two or more kids have the same lift, it will only call up the name of the first instance of that lift. You can see this in the "Leaderboard" worksheet, and the name "Adams, Andrew" appears for both lifts of 75. I would appreciate any help on how to correct this, as I've searched the Internet for weeks now looking for a solution. I've tried experimenting with different things as well, all to no avail.
This is for a template for teachers to analyze student testing data. On sheet4, wrong answers in each column are noted by a lack of a + in the corresponding cell. I want to paste the names of the students who missed each question into sheet 5.
I've done it by repeating a filter macro, but I manually copied the following separately for the 75 columns in the template.
Problem #1 - there must be a more efficient code, something that automatically loops to the next column
Problem #2 - the template has 75 columns, but many tests have fewer questions. I'm trying to find a way to stop the loop whenever it hits a blank cell in Row 10 on sheet 4. I've done it with an if/then in the last section on the above code, but where I'm at now, i would have to add that to the code section for each column. Which isn't that big a deal, but I figure there must be a better way.
The relevant portions of the workbook are attached here.
repeating macro until hits blank cell sample.xlsm
I have a spreadsheet that lists numbers in a column. They increase 1 number at a time, however the same number is listed 24 times before increasing to the next. Scaled down to 3 times it would look like this: 111, 222, 333, 444, 555, each one of those individual numbers would have their own cell. When I highlight the column and drag down, it starts doing decimals..how do I get it to recognize it? sample.xlsx
I want to drag it down to continue the pattern. Right now, I type a couple of numbers and drag to finish the section.
Matching Multiple repeating values in one column with another.
I have a three columns of data that I need to map the requird Ids in Col A against multiple repeats in Col C. AS per data below ....
Been trying to think of a way to get random numbers 1 to 36 generated without repeating in the same column, however also getting it to perform the same opertaion in 9 more columns (B:J) without the same number appearing in the same row.
example
1 2 5 4
2 5 3 1
3 4 1 5
4 1 2 3
5 3 4 2
Unsure if this is possible, have created a basic script for random number generation but have no clue how to expand across columns.
CartonNo1
ProductNo1
LotNo1
LotNo2
CartonNo2
ProductNo1
LotNo3
LotNo4
In the above (repeating for say, 50 or more cartons), is there a way with a macro(I know nothing about) or pivot table(see macro) to get the following format/result?
CartonNo1
ProductNo1
LotNo1
CartonNo1
ProductNo1
LotNo2
[code].....
I have an excel spreadsheet containing data in two column layout :
States, Cities
UP, Ghaziabad
UP, Agra
UP, Lucknow
UP, Kanpur
UP, Allahabad
Punjab, Amritsar
Punjab, Ludhiana
Punjab, Jalandhar
Punjab, Patiala
How can I covert it in following layout i.e convert repeating rows into column headings ?
Punjab, UP
Amritsar, Ghaziabad
Ludhiana, Agra
Jalandhar, Lucknow
Patiala, Kanpur
, Allahabad
I need a function or VB code to parse through a column of numbers and find a repeating pattern. The column has some initial numbers that do not fit the pattern and I need those returned along with the repeating pattern.
I have a list of two columns. Here’s an example. The left most column provides the row number.
_ A B
1 1 0
2 2 1
3 2 1
4 3 2
5 4 2.5
6 5 4
7 1 0
8 1 0
9 2 2
Whenever there are two repeating numbers in column one, I want to reduce certain numbers in column 2 by a certain amount. The amount is determined by half the difference between the number in column B corresponding to the second repeated number and the number in column B corresponding to the row after the second repeating number. The range of numbers that are to be reduced begins with the row after the second repeating number and ends with the last row before number one appears in column A. The values in column A are integers, always starting with one. For example, 1, 2, 3, 4, 1, 2, 3, 1, 2, 3, 4, 5.
For the above example, after finding the repeating number two’s at A2 and A3, it would reduce B4 through B6 by half the difference between B3 and B4 (1/2). The values for B4 through B6 would be updated in column B. The same for the next repeated numbers, which is one at A7 and A8. Half the difference between B8 and B9 is 1.
Here’s what the updated list would look like:
1 1 0
2 2 1
3 2 1
4 3 1.5
5 4 2
6 5 3.5
7 1 0
8 1 0
9 2 1
I have just been told that one of our servers is being replaced this weekend. I have thousands of hyperlinks in excel docs that reference this server. Other than manually reestablishing the links one by one to the new server, is there a way to do some kind of global change to replace the old server name with the new server name?
These are not hyperlink formulas, but rather Insert>>Hyperlink.
Or, is there a way to convert these hyperlinks to hyperlink formulas that would omit reference to the server and thus not be broken during the conversion?
Grasping at straws because I cannot envision having to relink these one by one.
I have a worksheet with values in yen in the C column. My boss (who will not get it through her head that I am not a programmer) wants a macro that will take a yen/$ conversion rate (e.g., 88 yen/$) in cell J1 and convert all the amounts in column C into dollars with a 5% markup and rounding up. If I was doing this as a worksheet calculation rather than a macro, the calculation would look like this:
View 7 Replies View RelatedThe following codes publish the worksheets "Estimate" & "Photos" to a PDF file, it all works great accept that the sheets remain selected in the WB after the sheets have been published. How do I unselect the estimate and photos sheets?
View 6 Replies View RelatedIf I have a scoring grade for different categories (8 in total) & the grades looks something like that: 1a=500, 1b=400, 1c=300, 2a= 250, 2b=210...& so on till 4c, but with different numbers for each category.
I need to come up with a total score of points if a person is given a certain grade from the above. ex. if they scored 2a on a certain category, 1c on
another & with all the rest of 8 categories scored. The number i need to come up with is the total points.
I am working on a sheet that logs sales enquiries and quotations. The quotations may be made in either Dollars, Euros or Pounds. However, I want the 'reporting' column to be Pounds. I would appreciate any advice on the simplest way of achieving this.
Imagine column A is dollars, column B is Euros and column C is pounds. Most of the time the quotations are done in pounds and the other two columns will be blank. Also, there will only ever be one figure quoted per row. Would it be easier to create a fourth column (D) to consolidate the three separate figures together? We are using fixed exchange rates for the year, so to convert to pounds we will multiply any dollar quotations by 0.5 and any euro quotations will be multiplied by 0.69.
I have two sets of data that I need which is obtained from one source.
Basically, the stats I am working with in excel are Processing Time (minutes/seconds) and Volume Per Hour. I desperately need a formula that will allow me to convert the processing time into Volume per hour.
Example: Average Handle Time, 7min 7 seconds = x per hour. If it was just 7 minutes flat I could simply divide that into 60. I also can't make it 7.7 and divide that because 7.7 doesn't equal 7m7s.
Does anyone have any thoughts on a way to do this? I found a conversion chart online that allowed me to do this work manually 'Conversion Chart: Fraction of an Hour to Minutes', but I haven't determined a way to make a formula out of this.
I have an spreadsheet that is monitoring the productivity of agents, as well as the time that it takes to complete each task. My workforce keeps time as .50 = 30 minutes. So 7 and half hours is actually 7.5. Agents are putting the actual time of it took such as 15 minutes however I would like to insert a formula that will convert this for me manually. I know I could give them a conversion sheet, but it took quite a while to get them to actually be able to work in excel. So I would like to add this formula.
View 9 Replies View RelatedI am trying to convert numbers from three cells into a date in one cell. I tried using the =DATE function, but it did not work. In A1, B1, C1, I have 1, 15, 2002. I would like cell D1 to take the info from the preceeding three cells and display "January 15, 2002"
Presently, I have A1...C1 formatted for "General." D1 is formatted for "Date." Yet I get the answer "August 23, 1907" (or 2792 as 'General').
How can I make my data in "input" tab to look like in the "output" tab the easiest way?
View 1 Replies View RelatedI would like to convert date written like this "April 24, 2014" in Excel Date format.
Is it possible to do it with a formula or data import?
why is that I have the same time value but with different conversion results?
I have values in column A10:A26 with an average time of 00:00:38 result with converted value of 7052.04.
When I type 00:00:38 in Column A30, it gives me a result of 7139.37...
Why do I have different conversion results knowing that I have the same time of 00:00:38?
I Have attached a sample workbook.
Why when I convert the following data, why the plus sign "+" converts to a /K?
I'm trying to convert values in groups of cells to a 3 of 9 barcode.
The value would be something:
+R4235
But when the font is changed to a 3 of 9 barcode and then I test the barcode in Notepad I notice that the plus sign is replaced with a /K.
I am using excel for invoice making...In the end i have a total amount. I need to type it in words for every invoice at present.
How can i convert it to words automatically? Is there any formula to it?
Or is there anything else? Please suggest me friends.
I am trying to create a spreadsheet that will take all my grades from the semester (I'm a college student) and compute my GPA. I managed to get a weighted average for each class, but the grade is on a scale of 1-100. I need to convert that to a letter grade, and then a 4.0 scale. How can I set it up so that it will return "A" if 90<Grade<100, "B" if 80<Grade<90, etc.? I'm apologize if this is something simple, but I've been trying to find the right function for a long time.
View 5 Replies View RelatedSo I record a macro but it see only following bit
Range("A2").Select
Range(Selection, Selection.End(xlDown)).Select
I want this selection to be converted to numbers but in proper way (There is a green thing in corner in every cell and on top of column a yellow field with exclamation mark. When whole column is selected and you apply appropirate convert function from this exclamation mark menu it will convert it properly.
While if you just click on excel tab and choose numbers it just does not change it to numbers
as i understand CInt() converts STRING variables to INTEGER variables. I am trying to create an inputbox, with input validation. So, if the user types in an integer, it will continue to a msgbox; if they type a number in string format, as in 'two', it will convert this into an integer and again display it in a msgbox; if they press nothing a msgbox will appear telling them there is no input; and if they press cancel the programme closes.
View 4 Replies View RelatedSee here:
http://www6.uniovi.es/~antonio/uned/...-754hex32.html
This site allows me to enter a 32-bit Hexadecimal Representation and get Decimal Floating-Point result.
For instance, 4224A012 gives me 41.2.
Is there a UDF available to do this inside of Excel?
I have received help on this topic in the past and I though I had solved the issue, however I realized recently that my formula will not work on any fractions larger than 1 inch. I am converting machine threads in fraction form to a decimal equivalent. here is an example of the what the entry looks like before it is converted.
ex,
1/2-20 3A (becomes .5000)or
3/4-13 2A (becomes .7500)or
1-14 3A this one will not work with my current formula (should be 1.0000);
i have an order book which lists the value of each order against the currency it was ordered in. So in column A i have a list of currencies (THB, GBP, AUD, USD, the user clicks the appropriate one) and in column B i have the figure (23.50). I want a formula that can convert all these in GBP so that i can report the order totals in one currency in column C. =(IF A1="THB", B1/50, "") can i adapt this to include all variables? I will add a table with the currency conversion rates.
View 2 Replies View RelatedI'm generating an access database right now and want to import information off of a pdf and have it import all applicable data into a table I've created in Access. This will save me hours and hours of copying data.
Problem: The pdf was generated from AutoCAD, and when I convert to a spreadsheet, numerous cells are merged. I've been trying to come up with a logic statement to build a new concise table, and skip all blank cells. If I need to clarify this let me know. I'll attach a picture so you can see what I'm working with.
how to get the data from the pdf into access, that works too!
