The data comes from the divison of two stock prices that are updating in realtime..... hence i will get a figure of lets say 2.5563. I have it set so that the cell auto rounds to the nearest number even though the formula bar displays the above figure.
My problem arises when I cut and paste this data into a new cell, the decimal figures are still there. I have to have this figure pasted as 3...... not 2.5563 and rounded up to 3.
I have a vba macro that takes data from one workbook and pastes it into another workbook. In doing this I have declared a few variables of type single (I only need two decimal precision). However, when I copy the values from the cells on the source workbook and paste them into the target workbook, the numbers end up having 12 decimal places. Ultimately, this extra precision causes my totals to be off by .01 or more after a while. I have tried rounding the number as I pull it off the source workbook into the variable, but that didn't matter. How do I solve this problem? Code for pulling data from source workbook:...
View 2 Replies View RelatedI have a source spreadsheet with a bunch of percentages as numbers, like this:
28.04
When I paste that into my end spreadsheet with its cell formatted as percentage, I get this:
2804
Which I understand why... I have been searching and all I can find to do is past special with the multiply operation (from a blank cell that contains .01) and then it converts them to the correct result, then I reformat the column as a percentage.
I have a little bit of problem with lookup function. When i paste values from another worksheet (paste special, values) in a cell which is lookup value i get #N/A. These values are numbers. When i put '7 for example i get the values i want from lookup table. I have a lot of these cells and its tedious job to put ' in front of every value. Is there a quicker solution?
View 3 Replies View RelatedI would like to copy and paste the values from a worksheet (HS-Detail) in a file to different tabs depending on the value in column A (Regions). I have a macro that works but it pastes the formulas and it takes quiet a while to run due to the number of records. How can I alter this to paste just the values and speed up the macro?
[Code] ......
See the below columns: Column A and Column B. I would like to get all the data in column A to become column names and the data assorted under these column names vertically.
Column A Column B
0_country Canada
0_employee_type HE
0_province" AB
[Code] .........
I would like the end result to look like this
0_Country 0_employee type 0_province
Canada HE AB
USA HO CA
UK HL XY
I am looking to see if is possible to copy and paste a worksheet and then remove data( only values not Text) and also not removing formatting and formulas
View 1 Replies View RelatedFrom mySQL database, i am getting a ton of data that is all being inputted into a single excel cell. Within this cell, there are certain data points that i wish to obtain (Bank #, SSN #, Routing #). There are multiple difficulties in obtaining this information.
1. these cells contain the same fields, but different number of total characters (differing in names, addresses, etc.)
2. some of the data points (like SSN) are inputted incorrectly, so even though a SSN is only 9 digits/characters, I may have to output all 11 that the SQL database placed within the cell.
Can I get some help? I'm thinking of a search function/macro within excel, because all of the fields show up correctly.
something like (i know this doesn't work)
= or("cellA1" contains/finds/function SSN,return the 9 characters after "SSN ")
um...yeah. difficult to explain, i'm sorry!
edit: not sure what is wrong the file. I have attached a new one.
Some of my numeric values are with single decimals .....
Eg:
1542.2
9856.5
659855.9
2589.7
When I format in Excel with Number with 2 decimals my results remain the same
But the result which is need is:
1542.20
9856.50
659855.90
2589.70
Here's how my daily report is currently set up:
ExternalInternalDifferences
123000123000
234564234564
345456345456
456567378987
565456456567
654547524564
788879565456
865478654547
745654
788879
865478
The External column contains data provided by an external vendor. The Internal column contains data compiled internally. The data in the Internal column will always contain data duplicate to the External column, but will also contain unique data not present in the External column. I would normally cut out the data contained in Internal column that is not duplicated in the External column, and paste it into the Differences column, and move the remaining cells in the Internal column up. The result would be the External column data and Internal column data would align by row, and the data unique to the Internal column is segregated to the Differences column, like so:
ExternalInternalDifferences
123000123000378987
234564234564524564
345456345456745654
456567456567
565456565456
654547654547
788879788879
865478865478
While not a difficult task for 8 rows of data, the actual daily report contains over 1000 rows, on average. I would like to set up a template workbook, where I can simply open the template workbook, paste the data into both the External and Internal columns, then have the values that are unique to the Internal column extracted from the Internal column and inserted into the Differences column.
The end product would be used daily, with differing amounts of data (from 100 rows to 10,000 rows).
I have a filtered worksheet -WB1 (filtered by Column "B"). I want to count the number of cells or rows in column "B"(Only the filtered ones) of WB1. Copy out that exact number of cells from another workbook(WB2) from the bottom moving up(Column "A") and paste it into WB1 column "I".
WB1 - Count Filtered Cell/Row with reference to Column "B"
WB2 - copy Cell count bottom to top of Column "A"
WB1 - Paste into Column "I"
I have data in an Excel spread sheet that contains rainfall amounts that are to 2 decimal places. However, when ever I put the data into a pivot table they display as 1. I have reformatted the data in the base table, and tried to format the pivot table, all to no avail. There must be a way.
View 1 Replies View RelatedPlease refer to attached worksheet.
I have a value that has a whole number and a decimal. From this number I need to figure the Year and month. The worksheet has constant values from which this can be determined.
Basically, I want to format a group of cells to display 1 decimal figure if the number is not a whole number. If the number is a whole number (or if the rounded first decimal place is 0) I want it to display no decimal.
View 9 Replies View Relatedi try to paste in active cell copied range.
I mean that i do follow:
- i select range of cell - mostly range of column f.e. A2:A500
- i click/select on any free cell (f.e. B1)
- then i run macro
i expected it paste unique values (text or number)
this dont work
i dont know how defined the range
I have 4 columns (and a couple of other text columns) that are formatted as decimal with 6 dicimal points.
I need to create a text file with lines that are 80 bytes each from the spreadsheet - no spaces inbetween each of the characters.
The issue I am having is trying to format the 4 decimal point columns to be fixed numbers and retain the leading or trailing zeros to do a concatenation with the other columns.
Just an example of some what some of the values look like on my spreadsheet:
.123456 | .123450 | .012345 | .012340
Essentially when I'm all said and done, I would like the row to look like "text123456123450012345012340text"
I tried to format 4 new columns as general and use a "=right(cell,6)" and that worked pretty well for the cells that have leading zeros, but for the cells that have trailing zeros, it doesn't seem to pick up the zero. I tried to use a "=mid(cell,2,6)" but that didn't work either.
To monitor fast moving decimal values in the even numbered cells( e.g. F2 to F 30 ) of a column, ignoring blank cells, and if two of cells values simultaneously fall below a certain value e.g. 2.04 True if not False.
Attached is my code, pay attention to the bold part. I want the sourceSheet to be copied as a sheet and pasted in the targetSheet (the Sheet2 of "NewBook") but I want it pasted asvalues. Here is the specific part which needs to be looked at...and below is the full code.
VB:
Set sourceBook = Application.Workbooks.Open(sourceFilename)
Set sourceSheet = sourceBook.Sheets("Current")
Set targetSheet = NewBook.Sheets("Sheet2")
[Code].....
I need to convert a column of numbers currently formatted with 2 decimal places e.g. 112.12 to 4 decimal places (without the decimal point). I need the end result to be 1121200. I've tried a few different suggestions given on the forum previously but can't seem to retain the 4 decimal places that I require.
View 4 Replies View RelatedI have to make a excel document in which I have length and width in feet and inch format.
E.g. 10.01 in which 10 is feet and .01 is inch
I have all the length and width values in the above format. And what I want to do is convert the inch value (10.01) to feet value (.01=.08 feet) .
Just like the calculator here does.. [URL] ........
Like
10.01=10.08
10.02=10.16
10..03=10.25
...and so on...
Here is table of conversions from inches to decimal feet. But I don't know how to get a formula for this in excel...????
Inch Decimal of a Foot
1 inch 0.0833
2 inches 0.167
3 inches 0.250
4 inches 0.333
5 inches 0.417
6 inches 0.500
7 inches 0.583
8 inches 0.667
9 inches 0.750
10 inches 0.833
11 inches 0.917
12 inches 1.000
I am trying to create a unique sample code by putting together the values of other cells that a user will input. It's all working well apart from the last part, where I am trying to include a decimal number. I want the decimal number to appear without the central "." and in a four digit format. e.g. 2.5 would appear as 0250, 14.25 would appear as 1425. This is the formlua I am using currently:
=IF(ISBLANK(B4),"",IF(LEFT(C4,1)="w",(B4&"-"&TEXT(F4,"YYMMDD")&C4&TEXT(G4,"HHMM")),(B4&"-"&TEXT(F4,"YYMMDD")&C4&LEFT(TEXT(H4,"00"),2)&RIGHT(TEXT(H4,"00"),2))))
However, where the value of H4 is 2.5, I am getting a result of 0303 (I've put this part in bold). I have attached a small spreadsheet to aid understanding.
Any function in Excel, that would allow me to have a unit cost price (for example: 0.5432) and then for a table of figures containing the pack sizes to determine the correct unit price that would allow all pack costs to be at 2 decimal places. I have included an example below:
My spreadsheet would look like the following:
Cell A1 (Unit Cost Price) = .5814
Cell A3 (Pack of 75 units) = .5814*75 = 43.605
Cell A4 (Pack of 80 units) = .5814*80 = 46.512
Cell A5 (Pack of 100 units) = .5814*100 = 58.14
and so on
I need some way of making cell A1 change to a value that will cause all cells A3 to A5 to be 2 decimal places or less.
I need a formula to multiply only the decimal number in a cell and not the integer. For example: the number in the cell is 57.3615. I want to multiply .3615 only.
View 2 Replies View RelatedPaste can this be set to default to Paste Special Values only ?
I have a sheet with a number of lists validated drop down boxes. The sheet is networked and works fine.
Problem other users as they are entering information into the required cells they are copying and pasting. Then the inevitable occurs they paste data into the wrong cells the validation from the original cell is pasted as well. Is there a way I can set paste special values only to be the default for the full sheet.
Unfortunately we use excel 97 in the office.
is there any way to use the right function to return any data to the right of the decimal point?
eg 117.22 would be .22
108.1225 would be .1225
102.358 would be .358 etc
Is it possible to add a data validation to a cell which restricts the user from inputting more than 2 decimal places?
View 6 Replies View RelatedHow can I require 2 numbers before a decimal in data validation? I have a formula to require at least to characters after.
I'd like to require the user to enter at least ##.##
How do you restrict a user to only be able to enter up to 2 decimal places in a cell without it automatically rounding for them?
View 6 Replies View RelatedI am trying to export a range of data from excel to xml. I have a module that puts the range of data into one cell:
Code:
Function Concat(myRng As Range)
Dim myStr As String
Dim c As Range
myStr = ""
For Each c In myRng
If c.Value "" Then myStr = myStr & ", " & Chr(34) & c.Value & Chr(34)
Next
Concat = Mid(myStr, 2, 9999)
End Function
How to all data to come in with one decimal place (eg. "4.5","5.0",7.0")
Right now it looks like this:
("4.5","5",7")
I would like to implement specific cell ranges from two specific worksheets each within 33 workbooks (which all have several tabs) into a summary page in a separate workbook.
The cell ranges are going across my spreadsheet in rows and I would like for them to transpose into a columns depending on the data which I have separated by catergory on the summary page. They are all on the same location in each workbook which is separated by country. The cell ranges are E26:P37 and I would like to transpose them and have them put below eachother without overwriting for my format on the summary page, how I can put this together in a macro?