To monitor fast moving decimal values in the even numbered cells( e.g. F2 to F 30 ) of a column, ignoring blank cells, and if two of cells values simultaneously fall below a certain value e.g. 2.04 True if not False.
I have this code that works well for the entire column, but, I only need to monitor every other cell in the columns. the cells I want to monitor are:
B10, 12, 14...B96. the columns to be monitored are B,F,J,N,R. the column part is good. I don't want the pop up box to appear when I change B9, B11, B13 etc...
This seems to take much longer than I would have expected. Is there anything I can do to speed it up, or is this just something to live with?
View 13 Replies View RelatedBelow is code. However, I need this to happen for multiple cells.
The cells that I need to monitor are B10, B12, B14.... through B96 and F, J, N, R columns for the same rows. The input values will be stored in cells AM10, AM12, AM14 .... through 96 for the B column results. Then for F, J, N, R will be AQ, AU, AY and BC respectively.
Additionally, when B10 has an input, and the user input box displays for the number of hours, there is a cancel button available, but it does not work. How can I exit the loop and clear contents of B10 if the "Cancel" button is clicked in the dialogue box.
[Code] .....
I have 4 columns (and a couple of other text columns) that are formatted as decimal with 6 dicimal points.
I need to create a text file with lines that are 80 bytes each from the spreadsheet - no spaces inbetween each of the characters.
The issue I am having is trying to format the 4 decimal point columns to be fixed numbers and retain the leading or trailing zeros to do a concatenation with the other columns.
Just an example of some what some of the values look like on my spreadsheet:
.123456 | .123450 | .012345 | .012340
Essentially when I'm all said and done, I would like the row to look like "text123456123450012345012340text"
I tried to format 4 new columns as general and use a "=right(cell,6)" and that worked pretty well for the cells that have leading zeros, but for the cells that have trailing zeros, it doesn't seem to pick up the zero. I tried to use a "=mid(cell,2,6)" but that didn't work either.
Basically, I want to format a group of cells to display 1 decimal figure if the number is not a whole number. If the number is a whole number (or if the rounded first decimal place is 0) I want it to display no decimal.
View 9 Replies View Relatedhow to custom the column with data FAST: 34 to 34 and similar stuffs in the column to numbers. Theres a space in front of the number.
View 2 Replies View RelatedHow do I set a worksheet to monitor H29 to run a macro whenever H29 changes?
I found [URL] but I'm having trouble getting it to work right
I cant figure out the errors im getting enough to correct them.
i have a userform which displays a textbox which shows a variance in price terms based on a sheet which has live data via dde.
I would like to turn this userform into some kind of floating monitor if possible. At the moment - once you fire up the userform - the price in the textbox is fixed and does not change with the cell which fills the textbox on the userform. The only way is if you close the userform and re-open - then you will see the current price. I would like to keep this userform floating so that you can still select other cells on the sheet.
Is this possible?
Private Sub CommandButton1_Click()
Unload Me
End Sub
Private Sub UserForm_Click()
End Sub
Private Sub UserForm_Initialize()
With ThisWorkbook.Sheets("price").Range(ActiveCell.Address)
If .Value = "" Then
Range("D31").Select
Me.TextBox1.Value = "No Trade Selected"...................
my questions below are more oriented to hows & whys, as opposed to asking for a fast solution to a pressing problem.
I'm just reviewing the basics of SumProduct to be sure that I understand what I'm really doing when I deploy the function. So, I have the following formula:
I'm working on an Excel spreadsheet and basicly i'm inserting manually data from a lot of paper forms.
It isn't a dificult thing, but is boring, because I have to do more than 2000 forms per week!
I want to accelerate, and how to do that
Problem: "Address"! The Excel page that i'm working has a column to feel with Addresses manually, but I have a table with all correct Address names from the city that I'm working about in other page.
What I would like is when start typing some keyword from the Address cell, it could show me all the choises of input (based on the correct Address Table)
Excel, by default, show, by exact order, all the choises, already typed on the same collumn.
I don't want that.
- imagine I have the Table 1 (representing the table with all city adresses) with a collumn called 'Address' with:
A1 - Street ZXY
A2 - Avenue QWE
A3 - Street QWE
A4 - Avenue ZXY
when typing on another Table, if I write something like “QWE” show me the A2 and A3 to choose wich I'm going to feel, and the same to “ZXY”, showing the A1 and A4. Other thing, if I write “QWE street” may show A3 also. Keyword is what i'm talking about
when I run code attached to a User Form, the user form will leave trails (similar to what you see when you win at the Microsoft Solitaire game) when you drag it around with the mouse.
I haven't been able to figure out why this is. Some of my code runs and allows me to reposition my form without issue. Other times, I get these 'form trails' that obscure what's behind the form.
I have a spreadsheet control inside of a userform. I can generally access this spreadsheet and do what I need to do with it. My problem is that I need to monitor it for the cell change event. I normally accomplish this with:
View 4 Replies View RelatedI know what i need to do to get it to open the file I want. I dont know how I set the position of a file that i am opening. In this case a .pdf file.
I have searched and came up with a lot of info for userforms, but I am not working with a userform in this case.
I want to move the vales from F8 to F9, F9 to F10, F10 to F12 (there is a space)and so one. I would like it to be triggered by changing the value in F8 if possible. I have tried a good few ways, sometimes I get a stack 28 error.Zones.xlsm
View 6 Replies View RelatedIm looking for a macro that hide empty rows. I found some simple macro but that are long to execute. While looking for a faster code, I found two codes that work pretty fast. But as I don't understand VBA I am not able to adjust them to my situation.
First macro: I am able to specify my range (B6:B77), but the macro applies to blank cells and I need to apply to "" cells.
[Code] .....
Second macro: very fast as well. Here, it applies to "" cells, but I am unable to specify a range. So the rows 1 to 4, which are empty, are hidden but should not.
[Code] .....
I want to make a prize wheel (aka Wheel of fortune) I try to follow this code >> wheel of fortune but I stuck at the animation in order to make it look like the real prize wheel. as far as I google, this youtube (Simple Excel Pie Chart turned into AMAZING Electronic Prize Wheel of Fortune! - YouTube) demonstrate the result that I really want my chart would be.
how to make the prize wheel spin very fast at first and slower later until stop?
Some of my numeric values are with single decimals .....
Eg:
1542.2
9856.5
659855.9
2589.7
When I format in Excel with Number with 2 decimals my results remain the same
But the result which is need is:
1542.20
9856.50
659855.90
2589.70
The data comes from the divison of two stock prices that are updating in realtime..... hence i will get a figure of lets say 2.5563. I have it set so that the cell auto rounds to the nearest number even though the formula bar displays the above figure.
My problem arises when I cut and paste this data into a new cell, the decimal figures are still there. I have to have this figure pasted as 3...... not 2.5563 and rounded up to 3.
I'm trying to find a way to create an excel sheet for my company. It will be used to import into our CMDB. Its for computers(ID) and their monitors(LINKED TO)
We have made 3 rows: ID, CHECK and LINKED TO which consist of the ID's of each computer and the attached monitor. The CHECK row is where we put the word "OK" if that computer is physically present at that location. After this list was made, we decided NOT to link the monitors to the computers, so afterwards we will delete the row LINKED TO.
What i need to do now, in order to not have to seek every monitor manually, is to have a formula which looks up an id (i.e. WBE01111) in the LINKED TO row, and if that one exists in the ID row, it will place the word "OK" in the CHECK row.
Example: (with WBE01111 being a monitor attached to computer WBE03333)
[ID]_____________[CHECK]______[LINKED TO]
WBE03333________ OK _________WBE01111
WBE09999________ OK ________ WBE08888
WBE01111________(**)_________
**=formula must put OK here
So the WBE01111(monitor) below [LINKED TO] exists in the [ID] row, i want the formula to see that, and put OK below [CHECK] for WBE01111
Is there a quick way to transfer the values from a column to a row? If so, does this have to be for the entire column or can you select part of the column and transfer it to a row?
View 2 Replies View RelatedI have data in an Excel spread sheet that contains rainfall amounts that are to 2 decimal places. However, when ever I put the data into a pivot table they display as 1. I have reformatted the data in the base table, and tried to format the pivot table, all to no avail. There must be a way.
View 1 Replies View RelatedPlease refer to attached worksheet.
I have a value that has a whole number and a decimal. From this number I need to figure the Year and month. The worksheet has constant values from which this can be determined.
I have a vba macro that takes data from one workbook and pastes it into another workbook. In doing this I have declared a few variables of type single (I only need two decimal precision). However, when I copy the values from the cells on the source workbook and paste them into the target workbook, the numbers end up having 12 decimal places. Ultimately, this extra precision causes my totals to be off by .01 or more after a while. I have tried rounding the number as I pull it off the source workbook into the variable, but that didn't matter. How do I solve this problem? Code for pulling data from source workbook:...
View 2 Replies View RelatedI'm trying to compare the values of columns B and G and if any of the cells are G < B, I would like to move the whole row into the second worksheet. And only if possible, it would be awesome if the macro could check column A for duplicates before the value comparison and sum up the column B if there are duplicates. In my example row 6 and 7 on column A have the same suppliers code and the amount totals to 2.
In this case for example, the value of the third row of G is lower than B, and therefore I would like the whole row 3 to be cut out from worksheet 1 and moved to worksheet 2.
Original view of sheet 1:
SUPPLIERSCODE
ORDERAMOUNT
PRODUCTNAME
BARCODE
SUPPLIERSCODE
WAREHOUSE STOCK
And then cut out the rows in which G
1) I would like to be able to filter dates of column B (exemple from 01.01.2014 to 01.03.2014) and that the sum "Invoice Amounts" from these dates ONLY add up in cell G2.
2) I also want cells C2 & D2 to be used in the formula instead of having to select dates manually in column B.
I am trying to write a formula that will count rows. The hard part is when the project is cancelled I have the formula written to not count that row. However, I want the next valid row to be numbered sequentially. Here is the formula I have:
=IF($B2="","",IF($Q2="YES","",ROW($A1)))
So I want it to be numbered 1,2,3...., not 1,3,4.
I have a spreadsheet with data down column A. The data is either numeric or alpha numeric, however, it is not seen as numerical.
Is there a formula I can use to count the total number of cells with only numbers in against other criteria too? I can use Sumproduct for 2 criteria but can't figure out how to do the 3rd.
What is the fastest way to extract data in all the even numbered rows? Attached is the sample, and shows what i would like to do.
View 4 Replies View RelatedI need to convert a column of numbers currently formatted with 2 decimal places e.g. 112.12 to 4 decimal places (without the decimal point). I need the end result to be 1121200. I've tried a few different suggestions given on the forum previously but can't seem to retain the 4 decimal places that I require.
View 4 Replies View Related
