Counting Filtered Data Cells Copy And Paste Values From Another Workbook?
Apr 10, 2014
I have a filtered worksheet -WB1 (filtered by Column "B"). I want to count the number of cells or rows in column "B"(Only the filtered ones) of WB1. Copy out that exact number of cells from another workbook(WB2) from the bottom moving up(Column "A") and paste it into WB1 column "I".
WB1 - Count Filtered Cell/Row with reference to Column "B"
WB2 - copy Cell count bottom to top of Column "A"
WB1 - Paste into Column "I"
I have searched all over and read many solutions for selecting only visible cells and copy pasting them or formatting them by doing Ctrl + G and selecting visible cells only. However the problem is once I select visible cells only, it seems that every time I do Ctrl + C on filtered Range it only selects visible cells. I want a way to toggle this setting in Excel. I'm using Office 2007. For example: if I want to select the entire range, both hidden and visible cells within the selected table array, is there anyway to reverse or toggle the setting that causes Excel to refresh the "visible cells only" setting back to default or all cells?
It would be a much faster way than to remove all filters, select & copy entire range, and then re-apply all filters again.
I have copied Row no. 2,4,6 fro this GREEN table and want to paste same date in J and K column (in same row numbers)then how can I do this ?
It should Show like this if I 1 First I filter only Yellow cells 2 then I copy that Filtered cells 3 after that copying that filter cells I did Paste in same rows in J and K column
In the sample worksheet, I need VB code to copy the formulas in column D, to paste them as values in the same cells (without removing autofilter by clicking on menu Data>Filter>Autofilter, then edit>copy>paste special>values).
in the sample worksheet, I need help with a VB code to copy the formulas in column D, to paste them as values in the same cells (without removing autofilter by clicking on menu Data>Filter>Autofilter, then edit>copy>paste special>values).
I am using code to filter my 4 sheets Greater then 0 (zero)
After apply above filter now i need to copy multiple rows and paste on another specific workbook for paste i m using below code:
for 1st sheet with the name ("V2")
for 2nd sheet with the name("LV")
For 3rd sheet with the name ("F2")
and 4th sheet with the name("L2")
If I play above code one by one all is going very well,,,,,,or if use in this way all is going very well
But here is a big problem..........if any sheet have no value greater then 0(zero)....then code paste all data... e.g shssts("LV") .Range("C5:C54").Copy but C5:C54 have no data greater then 0(zero) and it will paste on another sheet c5:c54 and again new sheets data will paste below the c54 while c5:c54 have no data.
So I want if any sheet have no data with range is greater then 0(Zero) then skip the copy paste code or use like SpecialCells(xlCellTypeVisible) .
I have been working on a macro that compares a existing list of data to an updated list of data and then either moves any data not on the new list over to a completed tab (followed by deleting the record on the existing sheet), and then adds any items not on the existing sheet, but which appear on the new list, to the existing list.
I have come across a stumbling block, i have managed to identify on the existing list the rows of data that have been removed from the new list and therefore need to be moved over to the completed tab, but when i select the data it selects the header row aswell (which will always remain the same row). Obviously this then pastes the header row aswell, and also i can't seem to get it to paste in the new sheet to the next available row (i.e this will be used daily and i don't won't to overwrite the infor already in the completed tab). the next issue i have is then when i go back to existing sheet to delete the data i just copied across, as the header was initially select this also gets deleted.
The code below, is the complete code, including filtering, copying some forumals etc. The area i am getting stuck on is highlighted in red:
Sub Update() Dim bottomrow As Long Dim My_Range As Range bottomrow = Cells(Rows.Count, "C").End(xlUp).Row Set My_Range = Range("A1:Y" & bottomrow)
I have a spreadsheet with 5000 records and i would like to have a macro that can be able to filter by date and copy it to a new workbook.
i have a data validation that indicates dates and once i have selected a date for example "10/10/2013" and all data with that date will copy and paste as value to a new workbook .
Sheet linked from external file, new data coming daily. How to copy Values of cells from B4 till B-empty to C column? The attached file has a properly displayed data.
I'm trying to use a macro that will copy & paste values from one workbook to another. Everything works fine until I try to get it to Paste to next available row.
It worked the first time, but after that it jumps, several hundred rows at a time.
The following sub will look in the file ("FY09 SOF"), in column "A", search for the strings that begin with "2109", "3009", or ends in "-1", and copy the entire row. It will then paste these in the file ("FY09 PR Log Blank").
I have found that in the file ("FY09 SOF"), if things are filtered in any row, it will not copy those necessary items.
The data filter is on row 13 of each sheet. Is there a way of fixing this? (i.e. having the macros select "all" on the filter before copying the sheet? There are 60 sheets so a macros will be necessary.
Sub get_data() Dim wb As Workbook, wbDest As Workbook Dim ws As Worksheet, wsDest As Worksheet Dim lngCalc As Long Dim FoundCells As Range Dim FoundCell As Range
Set wb = Workbooks("FY09 SOF") Set wbDest = Workbooks("FY09 PR Log Blank") Set wsDest = wbDest.Worksheets("Paste all here, then sort")
With Application .ScreenUpdating = False lngCalc = .Calculation .Calculation = xlCalculationManual End With For Each ws In wb.Worksheets.............................
Copy over data from different workbooks and using paste special values to paste it into a new workbook using a macro. Here is what I have and what I am looking for:
My file path is
C:Documents and SettingsMy DocumentsProjectCostsDecember12
I also have a workbook called DecMonthlyTotal in the same folder with the same named worksheets.
I am looking for a macro to be placed in the DecMonthlyTotal that will pull the data from the Cashable12-13 worksheets from Function1, Function2 and Function3 and paste special the values into workbook DecMonthlyTotal, worksheet name Cashable12-13, it will also pull the data from the NonCashable12-13 worksheets from Function1, Function2 and Function3 and paste special the values into workbook DecMonthlyTotal, worksheet name NonCashable12-13
Both the Cashable12-13 and the NonCashable12-13 have Columns A - G The row that the macro should start the copying from is Row 3 for each of the workbooks; however I don't have an end row for the workbooks as this will vary.
I am successfully opening a .csv file using a variable value stored in a named range in my Main file (the variable includes the directory and path). I copy data from the .csv file to the Main file then I need to close the .csv file without saving but I want to do that by using the
Windows("xxxx").Activate
command where "xxxx" is the namedrange in my Main file which stores the .csv filename (without the directory and path prefix).
I can use the
ActiveWindow.ActivatePrevious
command but if I have another workbook open, this one closes instead of the .csv file I opened from the macro.
I realise this is probably very basic and I've searched the forums but can't find any identical postings.
Trying to paste filtered results except header row. My code below pastes the header row for "Details" 2x. I tried altering the row to row 2, but that caused incorrect results to be returned.
Detail - Sales First I filter the data range for " Total Sales" Paste the results with header row to wsDetails
Details - Details Then filter the data again for "N" I would like to paste these results to wsDetails w/o the header
Option Explicit Sub comp_pl_ytd_Totals() Dim wbBook As Workbook Dim wsData As Worksheet Dim wsTotals As Worksheet Dim wsDetails As Worksheet Dim wsExtract As Worksheet Dim rngData As Range Dim rngCrit As Range Dim rngDest As Range Dim arrCrit Dim myRange As Range Dim C As Range Dim lngrows As Long Dim strFormula As String Dim rngCase As Range With Application . ScreenUpdating = False .DisplayAlerts = False .Calculation = xlCalculationManual End With................
Is it possible, in vba, to copy two sets of cell values to two clipboards (clipboard1 and clipboard2?), open another workbook and paste those two seperate clipboard values into another two cells?
My code in the first workbook generates a new workbook with a variable in the filename, then copies the cells from the first workbook to the newly created workbook. This code is working properly when used in a draft worksheet I use for testing. As soon as I put it in the master file, an error message pops up "Runtime error 1004 : select method of range class failed". Then the debug sends me to the line " Cells.Select ". What should I be looking for, why does my code work on one file but when i put it in another one it doesn't ?
Private Sub CommandButton1_Click() Dim line_counter As Long Dim prm_line_value As Boolean prm_line_value = False Do prm_line_value = Sheets("Rate").Cells(1 + line_counter, 1).Value line_counter = line_counter + 1 Loop Until prm_line_value = False line_counter = line_counter - 1 Dim Wk As Workbook Dim number_of_new_wb_needed As Integer If line_counter < 5000 Then.....................
By referring to the attached file, I have to copy all the datas which have a value only ( total=0 is ignored) in the Bin_Trip worksheet(highlight in image1 below), then all this data will be paste to other new workbook. All this job is done by clicking the start button and after user enter the directory(image2 below). The last result consist of the workbook with the pasted datas from Bin_Trip worksheet. image1 image2
Essentially I want to show how many loans funded in October 2013, from ABC Lending, and I want that result to show in cell K9 of the Sample Output sheet. However, since I'm dealing with filtered data, I cannot figure out the correct combination of formulas to make this happen (e.g., SUBTOTAL, VLOOKUP).
Specifically, I'm stuck with the combination of a) counting the results that meet the monthly date criteria, combined with b) the filtered results. The single cell that I want to solve is K9, on the attached "Sample Output" sheet. Once I see how this cell works, I can figure out the rest. This cell is looking for the number of loans that funded in October 2013, from ABC Lending.
The filtered results are located on the "SCORE Data" sheet. The filter is already configured to only show results for ABC Lending, and the relevant column is labeled "Funded" (column "I"). Since the "Sample Output" sheet is looking for loans that funded in that month, and not a specific date, I created column "U" on the "SCORE Data" sheet, to convert specific day-dates to month-dates.
I have around 200 excel spreadsheets/workbooks with identical ranges but each with different data. There is a total of 5 columns and 225 rows in each spreadsheet/workbook. Looks something like this:
Workbook 1:
Title 1 Title 2 Title 3 Title 4 Title 5
A2 B2 C2 D2 E2
[Code] ....
The Cells I need to copy are in BOLD. I am trying to paste them onto another workbook as follows
Main Workbook:
Workbook # File 2 File 3 File 4 A2 Title 5 A3 Title 5
[Code] ....
As you can see, each workbook has identical A2 and Title 5 columns, so they only need to be copied once onto the Main workbook where data from the B and E columns are different for each Workbook. So not only I need to copy and paste from a Workbook onto the Main Workbook, but the code has be able to paste it onto a new row in the Main Workbook (where each row in the Main Workbook will correspond to the data copied from Workbooks 1-200.
I am new to VBA but I tried a code where I would copy and paste one cell at a time onto the same workbook and not onto the Main Workbook, and then how to copy and paste from one workbook to another, but as you can imagine that would take a long time:
It seems like I need some kind of loop, where it would copy and paste a set of cells and repeat the entire process until it reaches the end of the Workbook 1 while making sure when doing same thing for workbook 2, that the data pastes onto a new row onto the Main Workbook. I feel I have the logic down, but its in the syntax where I am failing.
how to loop through workbooks in a certain directory and copy the rows in sheet1 where column B contains numbers greater than zero, and then pasting them into a new master workbook. The sheets will be named differently each week but will always be in the same directory.
I have recorded a macro to filter data on sheet 'To Invoice' copy the filtered list, and paste on sheet 'Invoice' in C16.
The code just keeps looping (not looping in a code sense, it just seems to keep flickering the screen like its going over & over) until it locks up 5-10 seconds-ish and then I have to re-start Excel.
The range B2:E22 is not always populated, it could possibly be B2:E2 (one row), I dont know how to copy the exact data so I expanded the range to what I think would capture any eventuality....
I need a macro that will copy a selected range from an existing worksheet in a workbook and paste the data to the last row in another workbook on a particular worksheet.
I am trying to create a macro to copy a set of datas in a row , paste into another workbook (specific sheet),then save it as one of the datas that was copied over.
Workbook1
Ticket# Description Name
12345 Test 1 David
32145 Test 2 Steve
Workbook2 - sheet (ABC)
Copy row 2 from Workbook1, paste to row 1 in Workbook2 sheet(ABC)12345 Test 1 David
Saveas Workbook2 - ABC - "12345" - Ticket #
Copy row 3 from Workbook1, paste to row 1 in Workbook2 sheet(ABC)
And so on. I will have a set of data to trasfer to Workbook2, each row different workbook.
I have a time card report which will record the time spent on work for each employee. Each month, i have to generate the time card report and copy the data to my master file. Is there any code that can auto copy the time card entry directly to the master file? I only need some of the entry on the time card report, some of the column can be ignored.
I was thinking of creating a macro that will prompt me to choose the file to import as there are different file for different individual. Attach here with the master list (Demo.xls) & the time card for one individual (Nov-KTTHAM.xls) for reference.
I want to copy the data on column B of the time card to the column A of the master list, column C to column B, column D to column C, column E to column D, column F to column E and column G to column G.
Purpose: Build a roster from: Sheets(Settings).Range("A21").Value (this value is variable)
Problem: Find that A21 value in Range T2:T100 (each value in the range is unique) Copy that value to Sheets("Roster") E8 and the next 9 values to E14 E20 E26 E32 G2 G14 G20 G26 G32
Reason for posting: I've been trying to do this with vba but sheet formula will probably work, I can always Copy/Paste Special/Values to clear the formula. Keyword searching has resulted in no progress.
