Why isn't my copy and paste working between workbooks? We use excel 2000. I've resorted to using a lot of selection because I can't seem to figure out what is going on otherwise...
I'm sure this should be much simpler...
Sub PortData()
Dim wbA As Workbook, wbB As Workbook
Dim ws1 As Worksheet, ws2 As Worksheet, ws3 As Worksheet, ws4 As Worksheet, ws5 As Worksheet, ws6 As Worksheet
Dim sPath As String, sName As String, bTextSwitch As Boolean
Dim nLast As Long
Dim i As Long
Code: Sub MoveColumns() Dim src As Worksheet Dim tgt As Worksheet
[Code]....
Anyway the above code is meant to take 5 columns of data and paste them in the next row below the last populated row but it keeps overwriting the data already on SheetX.
Code: Sub COPYCELL()Sheets("Distribution").Select Range("B7:X84").Copy Windows("SecondWorkbook.xlsm").Activate Sheets("Distribution").Select Range("B7:X84").Paste End Sub
Basically I want to copy cells B7:X84 in the current workbook on the Distribution tab and paste them into Secondworkbook.xlsm that I have already open on the Distribution tab in the same range. There are graphs though so
I am not sure if that has an impact. When I do it manually I copy and then paste into SecondWorkbook and then I copy what I just pasted and paste special values.
I have several workbooks (around 100) that I need to grab a certain range out of (C2:C4). Contained in this range is a title and two numbers stored in row format. I need to copy this same range in every workbook, transpose the information and then insert the information in the consecutive rows.
Right now I do it manually and it takes a lot of time I want to set this up so I can import it into a ms access table at some point.
I am trying to find out if it is possible to create a macro in an excel workbook that will open another workbook saved on the computer, perform a find, copy specific data, and paste it in the opened/active workbook.
I have attached two Workbooks (OLD.xls and NEW.xls). I update this report weekly, but must always copy the previous week's status data (OLD.xls) into the new report (NEW.xls). Under each row, I enter a status update that pertains to the job (row) above it. When I run a new report, some data is removed and some is added to NEW.xls. (Details in the attached Workbooks)
I need to make sure that the proper status is copied and inserted below the new date for the matching job between Workbooks. The variable in column C must be the same in both Workbooks.
I copied and pasted text (last names) from Website A into File A. Then did the same from Website B into File B. I wrote index match formulas to compare columns between files. I've done this literally hundreds of times, and it's always worked. This time, however, I get ZERO matches - even though there are lots of them. Troubleshooting was straight-forward: it has to be website B. (Strange thing is, I HAVE used text from website B before in similar applications with no problems.) Something in the way they present the data is preventing matches. (Everything works when I manually type over text from Website B.) It's not an upper case/lower case problem. I tried copy-pasting values only - to no avail.
dear friends when i am enter data manually this macro work fine.but same data I'm copy & paste macro not working.pls help me..
Sub REQD_KILOS() Dim c As Range, MyString As String Application.ScreenUpdating = False For Each c In Range("J3", Range("J" & Rows.Count).End(xlUp)) MyString = Cells(c.Row, 6) & Cells(c.Row, 7) & Cells(c.Row, 8) Select Case UCase(MyString) Case "5000MSSP40/2" c.Offset.Offset(, 1).FormulaR1C1 = "=IF(RC[-1]="""","""",RC[-1]*0.145)" Case "4000MSSP40/2" c.Offset.Offset(, 1).FormulaR1C1 = "=IF(RC[-1]="""","""",RC[-1]*0.115)" Case "2000MSSP40/2" End Select Next c Application.ScreenUpdating = True End Sub
I have a standard template worksheet called "Input" (the workbooks name is "Input Capture") which spans C12:U1100.
In addition I have a seperate worksheet which is based in an all entirely seperate workbook called "People Data" (the workbooks name is "Succession Planning") which again spans C12:U1100.
What I would ideally like is a macro which matches the value in column C and populates the entire row (much in the same way as a HLOOKUP, only pasting values) with the exception of columns M and Q.
I would like to copy all data from all workbooks stored in one particular folder and paste them into a masterlist. The masterlist and all other workbooks in that folder have the same table header. How do I write VBA codes do the following tasks?
Options (1 and 2 are mutually exclusive): 1. VBA will go to that folder, open all workbooks one by one, if the data is filtered, then deactivate filtermode, and copy all the data but not the header, and paste it into masterlist and loop to the next workbook.
2. Create an inputbox in masterlist that allows user to key in Week Number. Then VBA will take the value, go to the folder and open all the workbooks one by one, apply filtering using the InputBox value, and copy the related data excluding the header into masterlist and loop to the next workbook. (*If the workbook in the folder is filtered, deactivate filter and then only filter using the InputBox value).
I have around 200 excel spreadsheets/workbooks with identical ranges but each with different data. There is a total of 5 columns and 225 rows in each spreadsheet/workbook. Looks something like this:
Workbook 1:
Title 1 Title 2 Title 3 Title 4 Title 5
A2 B2 C2 D2 E2
[Code] ....
The Cells I need to copy are in BOLD. I am trying to paste them onto another workbook as follows
Main Workbook:
Workbook # File 2 File 3 File 4 A2 Title 5 A3 Title 5
[Code] ....
As you can see, each workbook has identical A2 and Title 5 columns, so they only need to be copied once onto the Main workbook where data from the B and E columns are different for each Workbook. So not only I need to copy and paste from a Workbook onto the Main Workbook, but the code has be able to paste it onto a new row in the Main Workbook (where each row in the Main Workbook will correspond to the data copied from Workbooks 1-200.
I am new to VBA but I tried a code where I would copy and paste one cell at a time onto the same workbook and not onto the Main Workbook, and then how to copy and paste from one workbook to another, but as you can imagine that would take a long time:
It seems like I need some kind of loop, where it would copy and paste a set of cells and repeat the entire process until it reaches the end of the Workbook 1 while making sure when doing same thing for workbook 2, that the data pastes onto a new row onto the Main Workbook. I feel I have the logic down, but its in the syntax where I am failing.
I had to copy data from child woekbooks (*.xls) and paste it to the master workbook with same page to page every time when a macro is executed i had done the copy and paste part
But I'm Facing the problem in which i had to deal with
Validations as on both master and child sheet validation (column based combo box is activated ) one is worktype 2ns is time type
i jst had to copy data to the master macro works perfectly fine but the problem is that a msg box appears which signifies that i had to change the name (version ) for both types when i click yes 2 times it pastes the data
I'm attaching my macro as well as pic of that msg box with this attachment
how to loop through workbooks in a certain directory and copy the rows in sheet1 where column B contains numbers greater than zero, and then pasting them into a new master workbook. The sheets will be named differently each week but will always be in the same directory.
I get 'x' number of workbooks(with one sheet only) everyweek from which I need to copy data and paste to a master worksheet. (SCREEN CAPTURE BELOW)
I am unable to write the code myself as I have never worked on VBA and am only a beginner.
Part I:
The data I need to copy starts from the 19th row (A19:H19). The end point is determined by the row just before the row that has the words "Calibration Request" in it.
Part II: Just below the data that was pasted from Part I, the data from 2 rows below the words "Calibration Request" needs to be pasted. The end point for this would be a blank row encounter.
Dim strLoan As String Dim longCat As Long Dim rHere As Range Range("A1").Select [Code] .....
I can see the cursor move to all the desired cells when this macro executes; it just isn't dropping any data where it should be. I have been working at this stage for the last five hours with no success. I don't know whether my copy-paste methodology is broken or if it is my selection criteria
I have created a workbook with vb code that include 4 modules, 1 userform. These all work in the original workbook. When I copy and paste the workbook onto another laptop, none of the scripts work? Both laptops run the same os plus office 2003.
I tried all failed.We have about 160 different workbooks (one for each business unit) stored online. Staff enters information about their weekly revenue and expenses and here at head office I collect that information and consolidate them.What I am trying to do is that;1.) Create a master Workbook with ~160 worksheets (One worksheet for each unit) named exactly the same with other workbooks2.) And macro can pull the information from related files stored in a certain folderIt is very much like another members problem but I am not sure why I cant get that code working for me? [URL]
Copy over data from different workbooks and using paste special values to paste it into a new workbook using a macro. Here is what I have and what I am looking for:
My file path is
C:Documents and SettingsMy DocumentsProjectCostsDecember12
I also have a workbook called DecMonthlyTotal in the same folder with the same named worksheets.
I am looking for a macro to be placed in the DecMonthlyTotal that will pull the data from the Cashable12-13 worksheets from Function1, Function2 and Function3 and paste special the values into workbook DecMonthlyTotal, worksheet name Cashable12-13, it will also pull the data from the NonCashable12-13 worksheets from Function1, Function2 and Function3 and paste special the values into workbook DecMonthlyTotal, worksheet name NonCashable12-13
Both the Cashable12-13 and the NonCashable12-13 have Columns A - G The row that the macro should start the copying from is Row 3 for each of the workbooks; however I don't have an end row for the workbooks as this will vary.
I have a column "g" with this conditional formatting:- =A2<>A3 Format Bottom Border. However I will pass this workbook onto someone else who will fill in the text in column "g". They will use copy/paste text from other cells or columns even other workbooks that will not have the conditional formatting.
I have used Cells > Projection > Locked unchecked then used Tools > Protection > Protect Sheet and checked all. There does not seem to be a way to unlock the cell but protect Conditional formatting. Each time I copy and paste from other non formatted cells it wipes out my formatting.
In fristWB i have UserForm in which their is TextBox_1 & Transfer_btn-->cmdbutton ..with transfer_btn i want anything written in TextBox_1 should always paste new row in secondWB workbook I am trying to do this with USERFORM
Below is a code which I added to my 'Quick access toolbar' (and which is based off a hidden workbook). I use this macro to fulfill tasks to regular excel spreadsheets that are not macro enabled, however, I can't seem to get this macro to work for other workbooks. How to modify my code to work for other spreadsheets.
i can use application.username to get activeuser name and have excel check this and close the workbook if its not me, what i want to do is have excel check lets say cell A1 in workbook SECURITY.xls stored in C: and if it says Craig Shippey leave workbook open if not close the workbook, why i said working with closed workbooks is i dont want to have any indication on where its checking from,
1. i have a workbook in which i want an Workbook_open macro lets call this workbook staff.xls 2. the staff.xls should read cell A1 from C:security.xls into a variable called Check 3 if check craig shippey close workbook without any prompt
all this should be done without anyone knowing that a macro opens another workbook, i know if the user disables macros then it will still open, but i will just set their Macro Security level to low so they wont be prompted, i will also remove that item from their menu bar, if they cant see it they wont be able to alter it back
I've been developing a form in excel (not userforms, just the usual conditional formatting, validation and macros to show/hide rows etc). It all works fine now except one thing was noticed when a colleague was testing it. If she opens the form from the email, and she already has excel open, then the form will not work when she makes a selection from the dropdown list, which unhides the rest of the form. If she closes down all of excel and opens the form from fresh, it works fine.
in simple terms im trying to cross reference a name list with registers from another wrokbook. so basically the desired result is. i press my button and it loads the second workbook up, it then uses the a name list in the new book and searches for that names maches in the registers (a group of sheets) on the previous workbook then if a match is found it colours the background in green. I am however getting errors e.g. "run time error: '424': Object required"
with this line then highlighted in yellow: u = ShtNm.Sheets("Sheet1").Cells(1, "C").Value
Sub Macro1() Dim u As Integer Workbooks.Open FileName:= _ "S:HR TrainingO2 Operational TrainingRetentions and CollectionsUpgrades ames 18th june onwards.xls" ShtNm = ActiveWorkbook.Name...............
I am trying to create a timekeeping workbook that will track the time I spend on certain tasks. I have created the attached worksheet including macros that correctly allows me switch between tasks but I cannot run this set of macros in one workbook and work in another.
Windows 7 . How do i open multiple instances of excel? even when im working with two workbooks rather than both appearing as the active book in excel only one can be on top. id ideally like to have both appear side by side on my desktop, vertically not horizontally.
1. Copy cells B5 to V-First blank row in Strength Tests worksheet 2. Paste cells into Racks worksheet in cell C5 3. Change font size to 6 4. Sort by Column T descending then by Column C ascending 5. Copy one row (A5-W5 (1Rx23C)) from Racks worksheet 6. Paste row into M1 worksheet in cell D4 7. Print M1 8. Drop down one row on the Racks worksheet 9. Repeat steps 5-8 until there's a blank row.
I have 25 files with certain worksheets that I need to move to 25 other files.
Worksheet 1, 2, 3 and 4 in Workbook A needs to be moved to Workbook A-2014 Worksheet 1, 2, 3 and 4 in Workbook B needs to be moved to Workbook B-2014 Worksheet 1, 2, 3 and 4 in Workbook C needs to be moved to Workbook C-2014 etc....
Is there a way to do this with a macro? Preferably I would like to do this automaticly - i.e. runing the macro from a master file that
1. Opens Workbook A copies the worksheets 2. Open Workbook A-2014 paste the sheets 3. Save and close Workbook A-2014 4. Close workbook A without saving
I'm working on a sheet which references a sheet in another workbook. I want to refer to the other workbook simply by it's filename (Forecast.xls) but whenever I save and reopen Excel has replaced the filename with the full path (C:Documents and SettingskoconnorMy DocumentsAuto-sheet project[Forecast.xls])
This is quite inconvinient as I am eventually going to want to move both workbooks together to a different location. Is there a way to make Excel stop working out full file paths and just look for the filename in whichever folder the active sheet is sitting in?
