I'm trying to do this:
=VLOOKUP((DATEDIF(A2,C2,"Y"),H1:I10,2))
It doesn't work, I have found. It's for a spreadsheet that tracks Paid Time Off which which accrues at a different rate depending on how long the employee has worked for the organization. I want to use the VLOOKUP table to list the 10 different accrual rates and hoped that the DATEDIF function could produce one of 10 results that would match the values in the first column of the table.
I am calculating the length of time someone has worked for the company:
Column; Row A1,
Hire Date MM/DD/YYYY
Column; Row B1,
=DATEDIF(A1,NOW(),"y") & " years, " & DATEDIF(A1,NOW(),"ym") & " months, " & DATEDIF(A1,NOW(),"md") & " days"
Which gives me a result like: "4 years, 5 months, 10 days"
I want to be able to average the results from column B, thereby producing the average "years, months, and days" worked. Just not sure how to get there.
I have 2 dates..
09-feb-09
15-dec-09
Is therea way to calculate the number of years? this is equivalent to 0.27777 years.
Is there a way to get this with the datedif or another functiom?
why my datedif function is not working.
View 3 Replies View RelatedWhen using the following formula datedif will calculate completed intervals (years in this case): =DATEDIF(A1,TODAY(),"y") Is it possible to tweak the formula so that it will round up to the next intyerval? i.e. 16 years in stead of 15 years 3 months and 12 days
View 5 Replies View RelatedI have several cells that I use the "DATEDIF" function to added dates and display as, "1 M 2 D". I need to add the multiple results to get an sum of all of them.
Column C1 is the start date.
Column C2 is the finish date.
Column C3 is a separate start date.
Column C4 is a separate finish date.
I used the following formula to get the month/day count for each separate start/finish dates: =DATEDIF(C1,C2,"M")&"M"&DATEDIF(C1,C2,"MD")&"D". Both give me the result I need. I have blown a gasket trying to add all the start/finish into a single Month/Day number. Sample result should look like this:......
I'm using Excel 2000 and trying to use the datedif function. I've formated 2
columns as date m/dd/yyyy and left the formula column general I'm entering
dates
A1: 1/1/2002
B1: 1/1/2005
I'm entering the formula in C1
=datedif(b1,a1,"M")
I'm looking for the nmber of months between 2 dates
I get #NUM! for a result.
Im going insane trying to figure out how to Average out the data i've accumulated with the DATEDIF Formula...Can anyone please clarify if this is even possible ??
Here's the situation...
I've got a range of data that has been calculated by using the DATEDIF Function (below):
I have a DATEDIF column which I have used to calculate the age of a group of people from their dates of birth. This has produced results in cells which look like this: Age is 44 years, 1 Months and 28 Days
Where I am stuck is that I need to calculate the average of this column so I get the average of the total group. Is this possible?
I am trying to subtract two dates to find out whether an invoice is 6 months past due (regardless of number of days). I use DATEDIF in my formula and it works fine until now. It seems the function takes number of days into account and won't return the desire result when there are 31 days. I want to find out whether the number of months between two date are greater than or equal to 6 months without considering the number of days. I am attaching a sample worksheet for better explanation. As you can see, October is not working right.
View 5 Replies View RelatedI need to calculate the date difference between two dates and get the result in the number of years and proportion of months ie;
20/09/99 to 01/02/02 is 2.33333333 years. I can use the DATEDIF function to get 2 years 4 months as the result but for the calc I'm doing I need it in the format of 2.33333333. Thinking I just need to tweak the DATEDIF a bit but just can't work it out!
I am creating a report and I am using the following Formula with condition.
(IN Q2 in the file attached)
=IF(P2="","Enter New to IMP check Date",DATEDIF(P2,C2,"d"))
Where in P2 is the START Date and C2End date.
P2 = 01 Jan 13
C2 = 10 Mar 14
When I apply the DATEIF formula its ignoring the year differ ace and give a result of 8 days not sure whats wrong here as the "Y" & "M" function works correctly and give proper result.
Sample attached : Book1.xlsx
I need to calculate the difference in Years, Months and Days between:
Date 1 = TODAY()
Date 2 = 4 years after a date in cell A1, which will always be earlier than today's date
(A bit of backround - I have certain risk management procedures that have a lifespan of 4 years. I want to calculate the time between now and 4 years after the date the procedure was completed, essentially to see how long before they have to be redone).
So far I have:
=DATEDIF(A1+4,TODAY(),"y")&"y "&DATEDIF(A1,TODAY(),"ym")&"m "&DATEDIF(A1,TODAY(),"md")&"d"
But that returns #NUM!.
Removing the +4 obviously just calculated the difference between the date in A1 and today, but I need the date in A1 PLUS 4 years and today.
I have also tried:
=(DATE(YEAR(A1)+4,MONTH(A1),DAY(A1))-TODAY())/365.25
which works in theory, however:
a) no consideration for leap years
b) does not return nY, nM, nD - only the decimal.
However I would be happy to use this method if I could convert it to Years Months Days.
I'm trying to calculate the number of days between dates in column A and B. I've looked at the examples in this site and thought I used the formula correctly, but the cell returns an error message when I type: =DATEDIF(A1,B1,"D")
View 7 Replies View RelatedI have a Vlookup which I want to modify so that it can become dynamic as the table array part of the vlookup will change.
So the basic vlookup is as follows:
=VLOOKUP($R$3,ATTRIBUTION_FACTSET!$M$60:$P$73,2,0)
but the data I am looking for wont always be in the range M60:P73.
So I tried to make it dynamic by doing the following:
=VLOOKUP($R$3,INDIRECT("ATTRIBUTION_FACTSET"&"!M"&U1&":P"&V1),2,FALSE)
The idea being that U1 and V1 would be numbers that can change so in this case U1 would equal 60 and V1 would equal 73
This vlookup is giving me #N/A and no matter how I modify it I cannot get it to work.
I have a sheet using VLookup to find EMail and Web addresses. I can get the address to show up but not as an active URL address. Is it possible to have the address "active" so I can click on it and activate the EMail or Web Site?
View 5 Replies View RelatedI'm trying to do a Vlookup on a file that gets automatically downloaded to the computer from a website. The data is in lots of different data sets, like so:
Loans to countries
Mar
Apr
May
Jun
Loans to banks
Mar
Apr
May
Jun
Every month a new row of data gets added to each table, meaning the start and end cells of the array also shift each time.
I'm currently trying to vlookup the same data from 2 different sheets. Here is the code i've tried.
View 4 Replies View RelatedI’m trying to develop a workbook which holds monthly data on loan information. It tracks the interest and balance on the loan. I want the first page to have a table displaying the interest payments for every individual tab. When I was brainstorming the idea, I was considering a sort of Vlookup function to find the tab the account is on and then a further function, possibly another vlookup which connects the month to that month’s interest payment. Can anyone help me figure this out?
The attached spreadsheet is obviously simplified, there are well over 30 tabs. But I would like it to, ideally, search the account number column, search the workbook for that account number, and then when on that page use the month at the top of the first page and retrieve the interest payment and put it back in the cell. It’d also be great if the formula can be transferred between workbooks. I’m not sure if that makes sense; basically if I were to copy that worksheet into the next months book, I would like that the formula read those tabs instead of becoming obsolete due to references from the first workbook.
I have data in a pivottable which I want to compare with another table. The lastcolumn+1 of the pivottable needs to get data from another table. I have this for an example:
View 5 Replies View RelatedI have a spreadsheet (Need Data.xls) that needs to be filled out with a couple columns of data.
This data lays within 338 spreadsheets which have many items and may only have 2, or 3, or 50 that belong on my Need Data.xls spreadsheet.
I have a tab in Need Data.xls named "DIR" which has a list of 336 excel files that need to vlookup'd into.(not a separate file) They're all setup with this format:
I am receiving a run-time error with following code. The error message is "unable to get the VLookup property of the WorksheetFunction class". I only receive the message when the lookup value is not found in the table.
I thought adding the "False" command at the end would return an "N/A" but it didn't. Is there anything I can add to avoid this error?
I'm taking a spreadsheet that I produce each month and creating a year to date spreadsheet in the same format. I'm using a vlookup to find the campaign name in each sheet and add up the totals. This works fine but sometimes a camapign ends and so the vlookup for that month will produce an #n/a value so will reduce the whole sum to #n/a.
The VLOOKUP + VLOOKUP + VLOOKUP I was using that produced an #n/a is shown below.
=VLOOKUP($A6,'[Margin by Site Net April 2008.xls]Brighton'!$A$5:$F$26,2,FALSE)+VLOOKUP($A6,'[Margin by Site Net May 2008.xls]Brighton'!$A$5:$F$26,2,FALSE)+VLOOKUP($A6,'[Margin by Site Net June 2008.xls]Brighton'!$A$5:$F$26,2,FALSE)
To get round it I've added in an IF statement combined with ISERROR as shown below. It works but is looking quite messy. Is there an easier way to do this ? (the formula below is from the cell below the one above so the look up value is one cell down)
I am trying to use Vlookup to find out the min and max sales of the products shown in the spreadsheet. I have used Vlookup before but only by itself and with 2 columns.
View 5 Replies View RelatedI am trying to create cell to calulate the total cost from a column is a pivot table. I thought i had done it but then realised that it doesn't account for dupliate suites that occur.
I thought that using VLOOKUP might work for this but not sure how to do it.
What I am looking for is to say (for pivot table sheet) if cloumn b contains arable then total cost =395, however if column b contains arable and forestry then total cost = 395, however if column b contains arable and urban then total cost = 420..... but for all possible cases.
At the moment if column b contains arable and forestry total cost = 520
Example:..............
I want column B to be populated with the details from Sheet1, Column B if A = A and if not found populate with the text "NO ID". However for valid results, I'm getting #REF! The formula I'm using is:
=IF(ISNA(VLOOKUP(A1,Sheet1!A:A,Sheet1!B:B,FALSE)),"No APW ID",VLOOKUP(A1,Sheet1!A:A,Sheet1!B:B,FALSE))
I'm assuming this is because the value of Column A is text and not a numerical value but am having a real blonde moment as to how I can solve this.
I added the roundup column because i thought that might be the problem.
=VLOOKUP(0.18,B4:C2819,2,FALSE) result=#N/A
A B C D
GP%roundup profit price
0.350.36 $635.00 $1,800.00
0.350.36 $630.00 $1,795.00
0.350.35 $625.00 $1,790.00
continues
0.190.19 $265.00 $1,430.00
0.180.19 $260.00 $1,425.00
0.180.18 $255.00 $1,420.00
0.180.18 $250.00 $1,415.00
0.170.18 $245.00 $1,410.00
0.170.18 $240.00 $1,405.00
im trying to created a worksheet that adds the number of days people are off in a year, i have come up with this formula as people can chage teams and therefore position in the worksheet,
View 4 Replies View RelatedHey experts.
I have a data source that I am trying pull data from as a roll up and I am having a difficult time with a solution.
I am basically trying to pull data directly below the cell of a VLOOKUP. Please see the attached.
This is just a small example of the actual data. The solution for the gross scores is very simple using VLOOKUP. However, I need assistance with the net scores. Hoping this makes sense once you see the file.
Thanks,
Mike
I have used Vlookup in a situation where the user selects the customer short code from a dropdown list and then it will display the customer address details in the 6 rows below the search area.
There can be 3 or 4 different contacts for each customer that I would like a dropdown list where the user can select the contacts just for that customer based on the vlookup criteria from above.
I tried assigning each customer a code, then making a new list of contacts, and naming the contacts based on the customer code, but got lost in what i was doing and not fully understanding what I was doing.