I am calculating the length of time someone has worked for the company:
Column; Row A1,
Hire Date MM/DD/YYYY
Column; Row B1,
=DATEDIF(A1,NOW(),"y") & " years, " & DATEDIF(A1,NOW(),"ym") & " months, " & DATEDIF(A1,NOW(),"md") & " days"
Which gives me a result like: "4 years, 5 months, 10 days"
I want to be able to average the results from column B, thereby producing the average "years, months, and days" worked. Just not sure how to get there.
I have a DATEDIF column which I have used to calculate the age of a group of people from their dates of birth. This has produced results in cells which look like this: Age is 44 years, 1 Months and 28 Days
Where I am stuck is that I need to calculate the average of this column so I get the average of the total group. Is this possible?
I'm trying to do this:
=VLOOKUP((DATEDIF(A2,C2,"Y"),H1:I10,2))
It doesn't work, I have found. It's for a spreadsheet that tracks Paid Time Off which which accrues at a different rate depending on how long the employee has worked for the organization. I want to use the VLOOKUP table to list the 10 different accrual rates and hoped that the DATEDIF function could produce one of 10 results that would match the values in the first column of the table.
I have 2 dates..
09-feb-09
15-dec-09
Is therea way to calculate the number of years? this is equivalent to 0.27777 years.
Is there a way to get this with the datedif or another functiom?
why my datedif function is not working.
View 3 Replies View RelatedWhen using the following formula datedif will calculate completed intervals (years in this case): =DATEDIF(A1,TODAY(),"y") Is it possible to tweak the formula so that it will round up to the next intyerval? i.e. 16 years in stead of 15 years 3 months and 12 days
View 5 Replies View RelatedI have several cells that I use the "DATEDIF" function to added dates and display as, "1 M 2 D". I need to add the multiple results to get an sum of all of them.
Column C1 is the start date.
Column C2 is the finish date.
Column C3 is a separate start date.
Column C4 is a separate finish date.
I used the following formula to get the month/day count for each separate start/finish dates: =DATEDIF(C1,C2,"M")&"M"&DATEDIF(C1,C2,"MD")&"D". Both give me the result I need. I have blown a gasket trying to add all the start/finish into a single Month/Day number. Sample result should look like this:......
I'm using Excel 2000 and trying to use the datedif function. I've formated 2
columns as date m/dd/yyyy and left the formula column general I'm entering
dates
A1: 1/1/2002
B1: 1/1/2005
I'm entering the formula in C1
=datedif(b1,a1,"M")
I'm looking for the nmber of months between 2 dates
I get #NUM! for a result.
Im going insane trying to figure out how to Average out the data i've accumulated with the DATEDIF Formula...Can anyone please clarify if this is even possible ??
Here's the situation...
I've got a range of data that has been calculated by using the DATEDIF Function (below):
I am trying to subtract two dates to find out whether an invoice is 6 months past due (regardless of number of days). I use DATEDIF in my formula and it works fine until now. It seems the function takes number of days into account and won't return the desire result when there are 31 days. I want to find out whether the number of months between two date are greater than or equal to 6 months without considering the number of days. I am attaching a sample worksheet for better explanation. As you can see, October is not working right.
View 5 Replies View RelatedI need to calculate the date difference between two dates and get the result in the number of years and proportion of months ie;
20/09/99 to 01/02/02 is 2.33333333 years. I can use the DATEDIF function to get 2 years 4 months as the result but for the calc I'm doing I need it in the format of 2.33333333. Thinking I just need to tweak the DATEDIF a bit but just can't work it out!
I am creating a report and I am using the following Formula with condition.
(IN Q2 in the file attached)
=IF(P2="","Enter New to IMP check Date",DATEDIF(P2,C2,"d"))
Where in P2 is the START Date and C2End date.
P2 = 01 Jan 13
C2 = 10 Mar 14
When I apply the DATEIF formula its ignoring the year differ ace and give a result of 8 days not sure whats wrong here as the "Y" & "M" function works correctly and give proper result.
Sample attached : Book1.xlsx
I need to calculate the difference in Years, Months and Days between:
Date 1 = TODAY()
Date 2 = 4 years after a date in cell A1, which will always be earlier than today's date
(A bit of backround - I have certain risk management procedures that have a lifespan of 4 years. I want to calculate the time between now and 4 years after the date the procedure was completed, essentially to see how long before they have to be redone).
So far I have:
=DATEDIF(A1+4,TODAY(),"y")&"y "&DATEDIF(A1,TODAY(),"ym")&"m "&DATEDIF(A1,TODAY(),"md")&"d"
But that returns #NUM!.
Removing the +4 obviously just calculated the difference between the date in A1 and today, but I need the date in A1 PLUS 4 years and today.
I have also tried:
=(DATE(YEAR(A1)+4,MONTH(A1),DAY(A1))-TODAY())/365.25
which works in theory, however:
a) no consideration for leap years
b) does not return nY, nM, nD - only the decimal.
However I would be happy to use this method if I could convert it to Years Months Days.
I'm trying to calculate the number of days between dates in column A and B. I've looked at the examples in this site and thought I used the formula correctly, but the cell returns an error message when I type: =DATEDIF(A1,B1,"D")
View 7 Replies View RelatedE11 through E24 contains numbers and a few errors (#N/A) that need to persist (the errors need to show).
E10 needs to show the average of the numbers that are in E11 through E24, and just ignore the errors.
I have many columns like that - where the errors need to show and I need to show an average of the number/values that do appear, ignoring the errors.
i have two columns...a and b (a w/ names, and b w/grades). then i have the table lookup with names and grades all mixed up for many rows. i want to be able to average the grades with appropriate names.
=average(vlookup(name, table, column, false))?? i don't get it to work and how can i specify the grade to average?
TotHCInv.Value = WorksheetFunction. Sum(KRInv, PBLInv, CRInv, PVInv)
If i >= 34 Then CPSCtphRMA.Value = WorksheetFunction.Average("G" & (i - 30) & ":G" & i)
The first line runs properly, but the second line bugs out with the error message "Unable to get the Average property of the WorksheetFunction class". I can simply do the math, but I thought that using the worksheet function would be easier than summing and dividing. I'm curious, though, as to why I can't seem to use the Average function.
Can I get a minimum average and a maximum average, I have a worksheet with days of supply for 100 stores with about 100-200 products each, the dos resides in column D.
I was going to create a summary page and reference column d.
The following just gives me the min, I want the min average if possible:
I am attempting to calculate Grade point averages for my students for all classes. There are 5 columns of grades to be considered. I frist assign values of 0-5 to the grades then average the points. My problem is that I want the AVERAGE to ignore the zero but it calculates it as well. (I enter a 0 if I have no grade for that class.) I have tried the{ } to make it an array formula but this also did not work. Here is what I have, can anyone help?
=SUM(AVERAGE(IF(AND(L2>89,L2<100),5,IF(AND(L2<90,L2>79),4,IF(AND(L2>69,L2<80),3,IF(AND(L2<70,L2>59), 2,IF(AND(L2>0,L2<60),1,0))))),IF(AND(T2>89,T2<100),5,IF(AND(T2<90,T2>79),4,IF(AND(T2>69,T2<80),3,IF( AND(T2<70,T2>59),2,IF(AND(T2>0,T2<60),1,0))))),IF(AND(AB2>89,AB2<100),5,IF(AND(AB2<90,AB2>79),4,IF(A ND(AB2>69,AB2<80),3,IF(AND(AB2<70,AB2>59),2,IF(AND(AB2>0,AB2<60),1,0))))),IF(AND(AJ2>89,AJ2<100),5,I F(AND(AJ2<90,AJ2>79),4,IF(AND(AJ2>69,AJ2<80),3,IF(AND(AJ2<70,AJ2>59),2,IF(AND(AJ2>0,AJ2<60),1,0))))) ,IF(AND(AR2>89,AR2<100),5,IF(AND(AR2<90,AR2>79),4,IF(AND(AR2>69,AR2<80),3,IF(AND(AR2<70,AR2>59),2,IF (AND(AR2>0,AR2<60),1,0)))))),-1)
I know it is huge. The syntax is correct. It calculates the average, but always for all 5 columns. It will not ignore a 0 in a column.
I'm using the formula =AVERAGE(B16:L16) to give me the average.
However I have a couple of problems with this. Firstly I would like to exclude the value zero from the average. Secondly to also ignore the lowest and highest values.
Example, if the values in the cells are 0,1,2,3,4,5,6,7,8,9,10 then the current result shows 5, by ignoring the 0 and lowest value 1 and highest value 10 the average should be 4.5.
Ok, I for some reason just cant wrap my head around this. I need to to get the average time per call of two rows, but they are based on how many calls taken.
so in one column i have 50168 calls taken at 4:21 seconds per call. and in the next row i have 597 calls taken at 5:20 per call. I need to see what the new average will be with them combined, and I need it to display in m:ss form.
to formulate Excel formulas to obtain the average buy price and average sell price for me to do this futures trading. Thanks a lot. I downloaded the Htmlmaker to post the spreadsheet here to show the manual way to calcualte the average buy price and average sell price but when it is on html form, i clicked on the 'Please click this button to send the source into clipboard' button & then i paste into this thread. Is the way to make my spreadsheet appear here correct cause it cannot work.
View 9 Replies View RelatedI wish to average the best three values (highest) of the last 5 values ( excluding zeros ) in a row.
View 2 Replies View RelatedWhat I am trying to do is track a 10 week rolling average, where scores are entered weekly in row A6 thru W6. The formula needs to count back starting with W6 until it counts 10 scores then average them. Some cells may be blank.
View 14 Replies View RelatedI have a column with time data in HH:MM:SS format. I need to find the average and sum of the entire column. But the problem is it does not give me the sum or average...
If I press F2 and then Enter in each of the cellsthen I get the sum or average. However, as there are thousands of entries, it's not possible to manually do F2 and Enter in all the data.
Is there a way to do it (F2 & Enter).
I have a list of 16,000 numbers in a column. I need to average every 62 consecutive entries, i.e average of 1-62, 63-125, 126-188.......
View 2 Replies View RelatedI have a spreadsheet which has data in the format of:
Date
Sales
Monday, 8 July 2013
191
Tuesday, 9 July 2013
180
[Code] ....
I calculate the average of the last four weekdays individually with =Average(A1,A8,A14..) in a cell above them to get a four week average.
Each time I add a new weeks worth of data, I manually adjust the formula to remove the first cell, and include the latest cell with new data.
I'm looking to find out if there is a way I can automate adjusting the formula so it always grabs the last four Mondays (for example)? Either in VBA or a formula.
Here is my code as it is right now (With the correct range, and yes its a messy range :
[Code] ......
That is my range and thats the range I have to use (The stats are spread out in those rows. How I can get this to disregard 0's? Right now it seems to fail on the third rangevalue (For example in the range above it fails and highlights Y88), but if i remove that value it does the same on the next one instead, always the third.
I have tried =AVERAGEIFS(Range,">0") versions and also ones with /COUNTIF after and others but cant get this to work.
screenshot.jpg
Ok, so from the attached picture (screenshot.jpg), you will see a data export of staff losses.
On the table to the right, i need cell G2 to take the ID from cell F2 and then search column A and add up every time there is negative number in column B.
So if staff ID has -15 , -15, -10 and -10 in the first table, their summary on the right table will show -50
(PS, i know it says AVERAGE LOSS) but i just need it to be the total. So basically, from the loss log on the left, it just counts the total losses occurred by each individual staff member on the summary table to the right.
i m using this to get average
r4/s4 = result(t4)
r4 = 5
s4 = 517
Result(t4) = 517/5 = 103.4
now i use the roundup function to get the decimal less value
=Roundup(t4,0) = Result = 103
i want both function in one function to get result