I throw darts and have made a excel scoresheet for Cricket and '01. It adds and subtracts the points for you and in '01 it gives you and average of your points. I am looking for a way to input the 3 dart or 2 dart out when they get to that number. So say if they have 170 left, in the cell below it will say T20-T20-DB, or if they have 151 left it can say T17-T20-D20.
View 9 RepliesI am captain of a Dart Team in 2 different leagues. I have a excel spreadsheet that does some calculation for me (Wins, Losses, Percentage) when I manually enter the numbers. I have just created a workbook with multiple worksheets for each week of the season, including playoffs, and a sheet for overall and print. I want to be able to input the data for each week and have it auto calculate on the overall page and auto populate the print page. The overall page will have all the stats, wins singles games, wins doubles games and wins 3 man games, along with percentage in each category. I am pretty sure I can accomplish this task. The problems I am having is:
1. Adding wins and losses based on player number, I have one cell with a players number and I will put a 1 or 0 in that cell based on a win or loss. Off to the side I have the player roster with card numbers and a win column and loss column. I would like excel to see the 1 or 0 in the main column and add the appropriate to the roster column, calculating total for the night. Then adding that to the overall page.
2. The print page, I want a easy to read page that displays each players, wins and losses for each category described earlier and averages through each week displayed nicely to distribute each week. Would I have to export that page to word? I want to display wins and losses as 14-7 without it calculating it.
If someone can point me in the right direction that would be awesome. I can do simple stuff in excel, never had to do anything like this before, wanted to do it for a while and just didn't know where to start. What formulas to look up, not familiar enough with the nomenclature to look for the correct functions to accomplish this task, or if it's even possible.
I'm creating a basic Dart scoring spreadsheet, and its been going absolutely fantastic, but then I was asked to create the Sets and Legs, thats when I got stuck.
I'm looking for a formula (or anything) that will add a Set when the Legs reach the number 3, and then again but make it 2 if that player gets another 3 legs. If you know darts you will understand what I mean.
How do I paste the first chart into the second chart but maintain the format of the second chart?
View 2 Replies View RelatedI need to plot various data on top of stock charts.
This data could be irregular in date: it could be weekly, or simply random.
To plot this data by itself requires a Scatter Chart.
From what I know so far, you CANNOT DO THIS.
However, I suspect this could be done if I build a Stock Chart from scratch using a Scatter Chart.
Error bars can be used to make the tails, however, I don't know how they built the body bar which has the characteristics of a bar (border, and interior.)
But since I don't really need those two characteristics, I just need a wider error bar line that is provided in the chart edit window. I'm guess through a macro, there are wider line widths assignable.
I know this has been discussed a number of times, but here is my problem
I have three charts in my workbook. I want to attach a macro so that when the chart is clicked it returns to Sheet - Home. I have using the following:
worksheets("Home").activate. But after I protect each chart and the workbook, and save and exit. When I reload the Workbook it has forgotten the assigned macros and nothing happens.
I am looking for a creative way to display a pie chart within a data point marker of a line chart.
My database has 3 value columns, Type1, Type2 and the Total (Type1 + Type2)
these are recorded per day (Date, in Column A)
I have a line chart that displays the total by date, but I want to find a way to display the percentage split of a particular day by type.
I was thinking to load the chart image into the Data point marker, but i don't think that is the best way as the data is updated daily and I would have to do it each day for a few line charts.
The other way I was thinking about was to have a generic Pie chat in the Line chart (Maybe in a corner) and the pie would update depending on way date series was selected or Mouseover'd)
the way that I am approaching it at the movement (Not the best way and by far not the coolest way. Is to have a list of all the dates in a column next to the Line chart and using some VBA, what ever date is selected in the column the pie chart displays the corresponding data. But eh challenge is that when there is alot of dates, I am going to be scrolling up and down.
I am using Excel 2010, but I cant not use the slicer's as the other users do not have 2010, they have 2007.
I have a spreadsheet created in Excel 2003 (which is what we use at work, unfortunately).
My employees periodically take a test to ensure they have certain items memorized (or are making progress to that end). The spreadsheet rows show all 46 of my employees, and their test scores. The columns are the dates that the tests are administered. I can create a line graph based on the chart data, and interpolate these data with no problems.
The problem is that there are 46 employees! 46 lines on the same graph make for a very cluttered, hard to understand visual. I want to simplify the view by "filtering out" some of the data.
I have an additional column in my spreadsheet for each employee's work area (Area 1, Area 2, etc), and another column with data based on first letter of last name (the values here could be "A-G", "H-M", "N-S" and "T-Z", for example). I figure i could filter my line graph based on these two columns. For example, somehow select just Area 1, and reduce the number of lines on the graph to 16. Or better yet, Choose "Area 2" AND "A-M" and end up with 7 employees (and therefore 7 lines on the graph).
Here's what i have tried:
1) Select the work area column, and use the Filter, which created a drop-down list at the column heading. When i use this drop-down list, i can easily filter the data in the worksheet by Work Area, but this is not reflected in the line graph, which still shows all 46 lines. The problem was that i forgot that i had set the Calculation Options to "Manual". Setting this to "Automatic" (or leaving it on Manual and pressing F9) solved the problem, as the chart now updates when i use the filters. Calculation options are under the "Formula" tab in 2007, or in Tools -> Options -> [either calculation or formula, i forget what it's called] in 2003.
2) Create several separate line graphs in several separate sheets. I wouldn't want to assign someone else the task of maintaining a spreadsheet of such inefficient design.
I have created a population pyramid and want to add another chart on the secondary axis which I can do. The part which I seem not to be able to complete is getting the line chart secondary axis to read from the primary y axis. It seems to add a new axis, even when I delete this the line chart does not read correctly.
View 1 Replies View RelatedHow can I add missing values to the axis in a pivot chart line chart? I have a numerical X-axis with values such as 0,1,5,8,14, etc. I have another set of Y values that correspond to the X values. If this was an XY-scatter plot I'd be able to plot X vs. Y and connect the dots for "gaps" in the X values. Since it's a pivot chart I cannot use an XY-scatter plot, I can only use a line chart. The line chart doesn't give me the ability to add the "missing" values, so it gives the impression that my data is more closely packed than it is. The data source is external to my spreadsheet, so I cannot add the values before creating the pivot table/chart.
View 1 Replies View RelatedI am trying to combine data from multiple worksheets and make a chart. I have about 200 keywords in every worksheet (about 50), and some of them repeat themselves through worksheets and some don't. For every keyword, I have an associated value in the next column that I want to portray over time (each worksheet is for a different period).
So what I need to figure out is how to be able to pick any 10 keywords from the worksheets and put them in a line chart where I can see the associated value for each period for every worksheet so I can compare my keywords' efficiency. The tricky part is that some worksheets do not contain the keyword and other worksheets contain the keyword in a different cell than the previous wsheet.
I would like combine (overlay) a bubble chart with a connected point scatter chart. I understand that, without VBA, this is not possible. However, I understand that, by using VBA, the markers of a scatter chart can be configured as circles with their size proportional to values in a specified column. This pseudo-bubble chart can then easily be combined with a connected point scatter chart.
My question is: does anyone have any VBA code to share that shows how to configure a scatter chart as the type of pseudo-bubble chart described above.
I am trying to overlay a line chart on top of a stacked column chart. The stacked column chart is a chart where the x axis is dates and the y axis is amount. The line chart is a projected amount that I will reach in few years; the x axis is the date while the y axis is an amount. I can get a chart that has a line and stacked columns, but ever time, the dates get messed up. The line has an extremely wide date range while the columns only have about a month of data.
View 9 Replies View RelatedIs there a way to display only the current month and the past 11 months in a Line Chart in Excel? So if I was to print Jan 2008 Excel graph, it would only display Feb 2007 - Jan 2008 data charting.
The spreadsheet of the data contains data for Jan 2005 - Jan 2008 so far, but only the current month with the past 11 months should display in the line chart depending on what is the current month.
My question is regarding changing properties in a chart without activating it. My current example is with adding data labels, but there are many other instances I could use this information in. Here is my current code:
VB: ActiveChart.SeriesCollection(2).ApplyDataLabels
However, I was hoping to replace it with something like this:
VB: Sheets("Dashboard").ChartObjects("Chart 1").SeriesCollection(2).ApplyDataLabels
I get the "Object doesn't support this property/method" error. Is there a way to do this? It just seems inefficient to have to activate the chart in order to make changes.
In the attached file I have the data which shows me the market size in value, my market share in value & I did a calculation to get the percentage. What I need is a chart that shows me the market size in column graph, my market share in line graph and I want the percentages to be showing also.
View 3 Replies View Related I have created a pie chart showing top 10 best selling categories. However, on this pie chart, I want %age of overall sales to be shown.
At the moment say I put in the following
Catalogue 1 100
Catalogue 2 98
Catalogue 3 92
Catalogue 4 85
Catalogue 5 84
Catalogue 6 75
[Code]....
I add Data Labels and select the percentages. This shows at Cat 1 having 12.5% of the sales (100 of 800 sales), Cat 2 having 12.25%, and so on..... However, what you don't see is the following data:
Catalogue 11 60
Catalogue 12 58
Catalogue 13 57
Catalogue 14 57
Catalogue 15 56
So based on 1,088 sales, Cat 1 at 100 is actually only 9.19% of TOTAL sales.
I understand what is happening, the chart is giving the percentage based on the data inputted into the chart.
I did consider adding an 11th category to the chart, which was the total of Catalogues 11-15. Whilst this does give a more accurate percentage figure (as now all sales have been inputted), it makes the chart look ****
Is there a way of either adding the 11th category, and then "hiding" it, so that the chart doesn't display it, but uses it's value to calculate Catalogues 1-10s percentage?
BTW: The reason I ask is that I could be dealing with anywhere from 30 to over 100 catalogues. So it's not ideal showing the others in 1 chart.
I have a pareto chart(Bar & Cumulative Line Chart) that I would like to have the line orginate at x = 0 & y = 0 without changing the position of the other points on the line chart.
Basically this is for better visual appearance. When I add a 0 to the table, it skews the alignment of the line chart with the corresponding bar chart.
I would like to combine / overlay a bubble chart and scatter chart with straight connectors.
I understand that, without VBA, it is not possible to combine a bubble chart with a scatter chart.
Unfortunately, I am a VBA newbie, and so I cannot write my own code (though I can usually adapt code to my specific environment).
My question is: does anyone have VBA code to share that will convert a scatter chart series (x,y data in 2 columns) to a bubble-style chart (bubble radius in 3rd column)?
Attached is the sample data worksheet. Chart 1 is XY type chart using Seconds (2nd column of sample sheet as x-axis from 42510 to 42530). How do I change it to Line chart using Time (1st column of sample sheet as the X-axis) retaining same data from 42510 to 42530 on both primary and secondary axis?. And how do I again change it back to XY chart?
View 3 Replies View RelatedI have a chart with 3 data series. The series are located in columns A, B and C respectively. Series I is a general number anywhere from 0 to 100,000. Series 2 is also a number, but is is devided by series 1. So, if series 1 was 100,000 then series two would be 25,000/100,000 which is 0.25. Series three will always be numerator of series 2 or 25,000 in this example. The numerator, or the 25,000 will never change, so, in my example, series three will be a straight line across the chart because it is always 25,000.
In my example, the .25 is plotted on the left value axes, and series one is plotted on the right value acccess (secondary axis). Series three is just a line in the middle.
My problem is that sometimes the line, series 3, doesn't match the values in both the right and left values axes. So, if series one is 48,000, then series two would be 48,000/48,000 = 1, and series three would be 48000 - the straight line. The third series should be a line touching the 48,000 on the right and the number 1 on the left. It does touch the 48000 on the left, but is below the number 1 on the left.
I'm looking for the excel model object chart and class diagram. I find the model object's description in the microsoft page, however i'm liked to have the object model and the class diagram in chart or picture.
View 5 Replies View RelatedI got a set of data which is only 2 colums collecting data problems. The output i get is a time stamp and a fault. Im looking to set a chart up with the time been on the X - axis and number of problems per hour on the Y - axis.
View 7 Replies View RelatedI want to use a macro to change attributes of a series in a chart. Unbelievably, if the series has been pasted into the chart from another chart, and although the macro can address the series and even return values (eg name) correctly, the selection simply cycles to one of the original series on the chart.
View 3 Replies View RelatedI have a two bar chart (red and blue) I'm trying to turn into a stacked chart. It has total cars and broken cars. There are a 100 total cars (10 broken). But when I stack them, it shows 110 total cars (it's adding instead of merging them). Once stacked, there should still be 100 total cars....but the tip of it should be red to show what amount is broken. It's adding the two together but it shouldn't....the number of broken cars is still part of the total.
View 1 Replies View RelatedI'll attempt to explain what I'm hoping to do. I have a column of data that I want to plot out into a chart. For example the data points might run from -1.50 to 2.5.
Let's say there are 20 data points in the column and they are spaced thruout the range shown above. They tend to cluster amoung themselves into 2 or 3 distict groups.
I want to first produce one horizontal bar that runs from the -1.50 to 2.5 overall range and secondly, I want to overlay a scatter chart horizontally over the bar showing where the data points lie within the range and also so I can visually see the clusters of points.
With the data residing in a column, when I generate the scatter chart, the points are laying verticle within the chart and spreadout horizontally. I can manually get what I want by narrowing the chart down to the point that the points lie on a straight vertical line, but I haven't been able to figure out how to "rotate" the chart 90 deg to overlay the scatter points within the bar chart.
Naturally, the optimum solution would be such that I could generate the charts originally and then allow the spreadsheet to generate the new charts as we modify the data values, etc.
I can create a column chart in excel comparing sales in 06 v's 07 for each month in 07, what I'm aiming to show on the chart is how sales have grown or not over a comparative period. A simple enough graph, I end up with about 24 columns (2 for each month and then a gap between each month).
I now want a line chart to show the performance of an index over the same time period, lets say the FTSE100.
I don't know how to get the line chart under the columns on the same graph, using the same x-axis with a small y-axis to the left. I could propably figure out the y-axis bit if I could only get the line chart below the columns.
Please look at the sample workbook below. The chart you see below is fine BUT I would like in a pivot table chart, so I could select any days on the pivot chart. I have tried it to do it myself but for some reason the time is not displaying on the pivot chart correctly. Any help please ?
P.S. If not possible then can we add a scroll bar or something?
I have created a pivot table and chart. The pivot chart consists of three sets of data from the pivot table. Two of the data sets are lines and the third data set is displayed as columns. I made the third data set into columns by right clicking on the data series line and selecting chart type. I change the chart type for that data set to a column and it worked great. The only problem is that when data is refreshed in the associated pivot table, the entire chart turns into columns with completely different formatting. Does anyone know how I can maintain the graph with the two lines and one column data set when I refresh the data?
View 4 Replies View RelatedI am trying to graph the following data in an area chart with line charts superimposed on the area chart. I have a lot of data (and a lot going on) so I'm trying to figure out the best way to show this in excel from a functional standpoing (i can't get this to work in excel!!) to also an asthetic standpoint (dont want it to look terrible or illegible). This is what I'm trying to chart:
1) Weather data (temperature) by region:
So one region, would be: Northwest
I would like the "area" (so a shaded region) to be the min/max of the temperature data for each month.
2) I would like to show the temperature for each year as a line graph on the chart - so you can see if a year falls in or out of the shaded region.
3) I would like to show a company's sales increases across the same months per year as separate line charts. I may choose to just show the biggest outlier year in the end... or to show 2006 (the latest data).
What I am trying to convery with the chart is that the company's sales is or is not tied to weather deviations. I have attached an excel file with the data. I haven't been able to use the area chart or get a two axis chart to work or get it to look even remotely professional.