Dart Stats Sheet

Jan 20, 2009

I am captain of a Dart Team in 2 different leagues. I have a excel spreadsheet that does some calculation for me (Wins, Losses, Percentage) when I manually enter the numbers. I have just created a workbook with multiple worksheets for each week of the season, including playoffs, and a sheet for overall and print. I want to be able to input the data for each week and have it auto calculate on the overall page and auto populate the print page. The overall page will have all the stats, wins singles games, wins doubles games and wins 3 man games, along with percentage in each category. I am pretty sure I can accomplish this task. The problems I am having is:

1. Adding wins and losses based on player number, I have one cell with a players number and I will put a 1 or 0 in that cell based on a win or loss. Off to the side I have the player roster with card numbers and a win column and loss column. I would like excel to see the 1 or 0 in the main column and add the appropriate to the roster column, calculating total for the night. Then adding that to the overall page.

2. The print page, I want a easy to read page that displays each players, wins and losses for each category described earlier and averages through each week displayed nicely to distribute each week. Would I have to export that page to word? I want to display wins and losses as 14-7 without it calculating it.

If someone can point me in the right direction that would be awesome. I can do simple stuff in excel, never had to do anything like this before, wanted to do it for a while and just didn't know where to start. What formulas to look up, not familiar enough with the nomenclature to look for the correct functions to accomplish this task, or if it's even possible.

View 10 Replies


ADVERTISEMENT

Dart Out Chart

May 7, 2007

I throw darts and have made a excel scoresheet for Cricket and '01. It adds and subtracts the points for you and in '01 it gives you and average of your points. I am looking for a way to input the 3 dart or 2 dart out when they get to that number. So say if they have 170 left, in the cell below it will say T20-T20-DB, or if they have 151 left it can say T17-T20-D20.

View 9 Replies View Related

Basic Dart Scoring Spreadsheet

Jan 15, 2010

I'm creating a basic Dart scoring spreadsheet, and its been going absolutely fantastic, but then I was asked to create the Sets and Legs, thats when I got stuck.

I'm looking for a formula (or anything) that will add a Set when the Legs reach the number 3, and then again but make it 2 if that player gets another 3 legs. If you know darts you will understand what I mean.

View 9 Replies View Related

Looking Up Sports Stats From Web Data

Jun 22, 2009

I have many spreadsheets with sports stats. I pulled the information from the web. So on one page I have the stats. The next page I want to be able to type the teams name and have excel pull out all the stats I want. Makes it easy to compare teams stats that are playing each other. Is this possible I tried to use most of the lookup functions but I just cant figure this out.

I will attach the sheets.

View 9 Replies View Related

Low And High Numbers With Stats

Jun 6, 2009

I seem to find myself stuff on this project yet again, JBeaucaire was able to help me to get this far im hoping you will be able to help me with the next step of this project
The doc iv attached is able to give me the differnece between low and high numbers with this example low numbers being between 1-18 and 19 – 36 high numbers and 0 being a break if u test the project u will understand im now trying to create a pattern of 3s were im abe to get stat hits on for example the patterns of 3s are the following(numbers) low,low,low-low,low,high-low,high,high-low,high,low every time I type in the numbers 3 times in a row on the 3rd one I want it to show as a hit(success) if the 3 numbers I type in are not a hit like high,high,high I want it to show me a miss if it is a pattern I want it to show a if theres a 0 it must rest like from 0miss,4hits,o breaks to 0miss,0hits,1break and so forth im also wondering if at another part of the form it can keep the total stats like iv added In the doc

View 14 Replies View Related

Automatically Update Stats From Web

Sep 17, 2013

Is there a way to automatically update football stats from a website. I want to update many different stats each week of player and team performances. Can I specify a website to go to update the info and prefer to do it each Tuesday. Let me know if more details are needed.

View 1 Replies View Related

Fiscal Year Stats

May 2, 2007

I have a spreadsheet full to the gills of patient information. I have a separate sheet with information from the first spreadsheet like counts of a certain type of tests or diagnosis codes using a 'countif' function. This is based on all the info in that first sheet. I want to make a second sheet with the same basic setup, but only from the patients who visited during this fiscal year. Is there a code I can use to make this happen?

Let's say the date of the visit is in column A and the test type is in column N. The code I'm already using is =COUNTIF(Info!N:N,"*TestName*") How do I get this to return results only if the date of visit was within the fiscal year?

View 9 Replies View Related

Building Stats From Pivot Table

Jan 10, 2014

I am new to pivot tables and charts and to build.... I heard that the best is to use pivot tables but no clue how to do it I have tried but no luck....

How can I see the following information in chart?

-Non con close out time by person- so who is failing to close out on time in this case is completion date
-Frequency of reports by area/ shift
-Number of reports by month, split into critical/major/minor
-Main reasons for reports so trend of type of record

View 3 Replies View Related

Formula For Stats Table In Percentages?

Aug 25, 2014

I use a workbook that records data centered around course referrals.

The workbook also has a stats page. It records Instructor stats but needs to be in the form mostly of percentages.

In Column D within the page Stats I need the cells to show the total number of "YES" that each Instructor has achieved from their number of pupils in the Sheet Data.

Column E and F in Stats need to show the percentage of Yes and No of each Instructor from Column D in the Sheet Data.

Column G In Stats needs to show the number in total of Referrals made by Indivisual Instructors taken from Sheet Data.

Columns H,I and J in Stats need to show the percentage of referrals to OBT,Kaya and HWal made by the Individual Instructors taken from Sheet Data.

Finally in Stats, Columns K,L and M need to show the percentages for each Instructor of their Leave Reason again Taken from Sheet Data.

Usually there are several hundred entries and at the moment I do this manually with a calculator.

View 2 Replies View Related

Being Able To Type A Code And Search Stats

Mar 20, 2009

i made another thread about this but this one is more detailed.

all my questions are in the attachment excel thing, on the main page.

View 9 Replies View Related

Stats Page Querrying Data

Aug 24, 2009

I having trouble trying to find the right formula to display statistics onto a 'Stats' page for my horse racing results from each month.

On the Stats page I have a summary of each month where I can view winners loosers, profit and loss, and the different types of racing (eg Flat and Jumps,Sprint, Non-Sprint).

For January I have two rows on a column for Sprints and Non-Sprints here I want to diplays the results (selections,won,lost) for each. The infomation on the January is all in date order and sprint races and non-sprints are all mingled in together. How do I display the infomation for sprints and non-sprints seperately on my stats page??

layout so far: (how it should be)

Stats page


racetype|selections|won|lost|placed
Sprints | 2 | 1 | 0 | 1
Non-Sprints | 3 | 1 | 2 | 0
Jumps | 1 | 0 | 1 | 0

January Page

RaceType|Result
Sprint |placed
NoneSprt |won
Jumps |lost
NoneSprt |lost
NoneSprt |lost
Sprint |won

View 11 Replies View Related

Sort Each Time The Stats Are Modified

Jan 30, 2007

I have used the "sort" function on many occasion, and I am now stumped as to why it wont work

I have a table with 9 columns: Team, Games played, Games won, Games tied, games lost, goas for, goals against, diff and points.

Each of the collums and rows have different calculators in them.

I want to sort each time the stats are modified, to show who is is first place, second etc. Thus the sort is by Points first, then Diff.

View 9 Replies View Related

Querying Baseball Stats From Espn

Apr 16, 2007

I'm struggling to find a way to index data in an array that meets certain matching criteria. I am looking for an employee's rate on a given day by searching a database that lists the dates that an employee's rate was changed. I was hoping to solve it with a crafty index and match array formula but have been unable to find something that works so far. I have attached a simplified example of what I am trying to do.

View 2 Replies View Related

Running And Copying Descriptive Stats Values

Jan 4, 2010

What I would like to do is for each worksheet run "descriptive statistics" in data analysis on the data in column Q, which varies in length, and then copy the "mean, median, SD, and skewness" in the results down columns T:W to the last row based off of a count in Column Q. Finally, calculate the "zscore" in column S based off of the formula in cell S2 in the attached workbook.

View 8 Replies View Related

Copying Cells From One Sheet To Multiple Sheet And Naming Sheet As Copy Text?

Dec 24, 2013

I want to do a loop where you can copy say A3 worksheet 1 then add another sheet naming the work sheet "A3" then copying A3 worksheet 1 to A1 "A3". After that looping to A4 to a new work sheet naming the work sheet "A4"copying the value to A1 "A4", etc...

Is there a simply way of doing this loop? I can probably fit my other coding into the structure.

View 4 Replies View Related

Creating New Sheet From Template Sheet & Filling In Summary Sheet - Userform

Oct 22, 2007

I have some experience with excel, but until now have not ventured into VBA and macros.

I have a workbook which will have the following sheets:

1.Absence Summary sheet - Summarises data from each employee's individual sheet.

2. Template Sheet - A sheet formatted as an absence record sheet, but without data.

3. Individual employee Absence record sheets - Based on the Template sheet.

I have read with interest the various posts and help files on User Forms & Macros, but have got a bit stuck.

My Aim: ....

View 11 Replies View Related

Copy Data From One Sheet (Fixed Cells And Sheet) To Another Sheet

Apr 18, 2009

I want to be able to copy a name from one sheet (Available Players), paste it to a cell in another sheet (Round 1 through Round 20). The cell that will be copied is fixed but the place where it will be pasted will be different and may be on a different sheet.

also i would like to change the color of the copied cell to "greyed" out or cut if it can not be greyed out. I have created a button and put in a macro that i created but have been having problems with it, generic 1004 errors that i can not figure out. i am attaching the document.

View 8 Replies View Related

Copy Sheet & Create New Monthly Sheet From Present Sheet

Jan 12, 2010

I want to create a macro button that can create copy, insert, paste and rename the new sheet in next month's name, like if the active sheet's name is January, I want to copy the whole sheet of January, insert new sheet, paste the new sheet and rename the new sheet to next month like February?

Also rename the new sheet (February) cell B3 the same as new sheet's name (February)

So if month of February is near end, the macro button in February will create the same way as Jan did which means the next sheet will be named March and so on.

View 9 Replies View Related

Comparing Sheet 1 With Sheet 2 / Moving Any Duplicates To Sheet 3

Feb 28, 2014

Is there a way I can compare sheet 1 Column A, with sheet 2 Column A, and then move any duplicates from sheet 2 over to sheet 3.

For instance,

Employee Numbers that match in both sheet 1 and 2, remove that row from sheet 2 to and insert it into sheet 3.

View 5 Replies View Related

Copy Data And Sheet Name To New Sheet And Delete The Old Sheet?

Mar 30, 2014

Example, I have a sheet named DATA1, I want to add a new worksheet, copy a certain range from the DATA1 sheet to the new sheet and rename it the same name DATA1 and delete the old DATA1 sheet.

Also, the sheetname will be unknown, the macro must get the sheet name first.

View 2 Replies View Related

Comparing Data Between One Sheet To Another Sheet And Paste To Different Sheet?

May 14, 2014

This work is challenging for me, now am doing Comparing the Data between One Sheet to Another Sheet, and Paste into Different Sheet.

I am Manually Comparing the Data between two different sheet, If the Data is matching, or Not matching, those data i have document in other sheet, So i have lots of records available. so manually doing its very difficult, but macro can compare the data. I will give the details of my process and example sheet is attached here....

Data 1.xls == This sheet have multiple tab with data and different order no.(Multiple Tab with thousands of records available)
orderNumberModified.xls == Modified data available. (Compare the OrderNumber to Data1.xls)

Now we have to compare the modified.xls and Data1.xls... For modified.xls have ORDERNUMBER available, that Numbers match with all tabs from Data 1.xls sheet.

If ORDERNUMBERS are matching, Need to copy the entire row from modified.xls To AVAILABLE TAB from Comparedata.xls sheet
If ORDERNUMBERS is not matching, copy the entire row from modified.xls To NOTAVAILABLE DATA tab from comparedata.xls sheet

View 5 Replies View Related

Merge All Sheet In Workbook In Last Sheet With Sheet Name For Each Entry?

Mar 25, 2012

I have workbook having around 25 sheets and i want macro to merge all sheets except first (summary) in to last sheet ( mergedata ) inpute data will be start from cell A17 in all sheet. also sheets may be add or delete as per requirement. after merge data from sheet name should add after each entry .

attached sample file for your reference.

[URL]

View 4 Replies View Related

Look At The Item ID Column On Sheet1 Compare It To SS# On Sheet Two And Copy Any Rows From Sheet1 To The End Of The Sheet In Sheet 2

Feb 26, 2009

I have I workbook that contains 2 sheets. The first sheet "Business Objects" is the master list. The second sheet "Gene" contains similar data but is incomplete. There is a unique identifer for both sheets and that is item ID. what I would like to do is look at the Item ID column on sheet1 compare it to SS# on sheet two and copy any rows from sheet1 to the end of the sheet in sheet 2. I have found in my searches on this forum a bit of code that identifies the ones in sheet1 that are not in Sheet2 and highlights them red(which is not neccessary for me, but I am struggling to figure out how to take that and paste it to sheet2.

View 3 Replies View Related

Macro To Copy Current Sheet, Create, & Rename New Sheet From Current Open Sheet

Oct 27, 2008

EXAMPLE: Complete Sheet called "Day1". When day1 is complete you click on button and it then copies itself and creates and renames new sheet to "Day2", then when "Day2" is complete you click on button and it then copies itself and creates and renames new sheet to "Day3", and so on and so forth to "Day30".

View 9 Replies View Related

Data From Sheet A To Appear In Sheet B Based On Data Posted In A Column In Sheet A?

Jan 1, 2014

I have a workbook where Sheet A is a Master Order Form. Employees will input the quantities they need in Column C. The sheet will be otherwise protected. Sheet B is a "printable" order form that only contains the rows from Sheet A where the Quantity on Sheet A is not blank and is >=1. This will allow me to print sheet B with no blank rows for the items I don't need.

I found the following formula which claims to be able to do what I want:

=IF(ROWS($1:1)>MAX(C:C),"",INDEX(A:A,MATCH(ROWS($1:1),C:C,0)))

I can't get it to work correctly across two sheets.

I've attached Sample of spreadsheet for review : HDForm_Test01.xlsx

View 6 Replies View Related

Conditional Formatting - Change Bottom Sheet Number Color If It Exists On Top Sheet

May 25, 2014

First off I have an excel sheet that I have split into two windows. excel sheet.jpg

I am looking for a formula that will change the bottom sheet number a color if it exists on the top sheet.

View 8 Replies View Related

Excel 2003 :: Conditional Format - Highlight Cell In Sheet 2 If Duplicated From Sheet 1

Mar 25, 2014

I have two Sheets, first is Service Data, the second is Log Sheet. In the Service Data sheet I have a column of serial numbers in column A. I also have a column of serial numbers in the Log Sheet, column A.

I'm looking for a conditional format whereas I enter numbers into column A on the Log sheet it will auto highlight the cell if I duplicate a serial number from row A in the Service Data sheet. I would like it to highlight the Duplicated number on the Log sheet. I know new versions of excel make it easier to do this but unfortunately I have Excel 2003.

View 3 Replies View Related

That Takes From Manual Sheet The Number In Specific Column And Multiply It By The Percentage In Sheet

May 29, 2009

I'm trying to create a formula that takes from "Manual" Sheet the number from colume G2 and multiply it by the percentage in sheet "AllocationRule".

My formula currently is =Manual!$G$2*AllocationRule!$B5.

What needs to happen is that the total number in "Manual" needs to be distributed evenly in 4 rows by the percentages allocated in "AllocationRule".

Right now I can't copy my formula over to the sheet because the "AllocationRule" should stop at B5 and not go further and the G2 from "Manual" should not change for the percentage allocation but should change to the next row for the next month.

And then after I've done the calculation I want the LOB in "AllocationRule" to be displayed in the LOB in "H1913_H1914" but I'm not sure what formula to use.

View 7 Replies View Related

Update Table On Another Sheet With Information On ACTIVE SHEET Based On Column Search?

May 14, 2014

What I have is a sheet that is copied periodically from some source sheet, and on this sheet is a table. This sheet is called "Onsite Checklist Template" and it's table is titled "Checklist". I also have another sheet called "Loggers and Initial Notes" which has a tabled titled "Record", and then finally a title sheet call "Proj Details".

To clear this intro up - The sheets, in their order, is: "Proj Details", "Loggers and Initial Notes", "Onsite Checklist Template". The tables: "Record" on "Loggers..." and "Checklist" on "Onsite..."

When the user wants to make a new site visit, he/she fills in the requested date and then selects a button on "Proj...". When this button is selected, it copies the table data on "Record" and puts it on "Checklist", then inserts a new worksheet tab, always in the 3rd position (the title is based on the site visit date in which the user entered), which is a copy of "Onsite...". Now we have another sheet with a table called "Checklist1", and upon another new site visit, there will be another worksheet with "Checklist2", and so on.

On the "Onsite..." worksheet, there is a button on it which also gets copied with the worksheet so that every new worksheet has this copied "Checklist ???" and this button. I'm looking for a macro that, when the button is selected, will bounce the active sheet's table "Checklist ???" off of "Record" and make changes as needed.

"Checklist ???" data range is B11:M20 (the header is on row 10); "Record" data range is B29:Q78 (the header is on row 28); Column headers are titled the same, just that "Record" has 4 extra columns, 3 in the middle and 1 on the end. "Checklist ???" columns 1-12 to "Record" columns 1-7, 10-12, 14-15. The search criteria is the 4th column in both tables ("Trk #").

I need the macro to do the following:If it finds a match, then update "Record" as needed with data from "Checklist ???", changing whatever cell is different in the row that contains the matching "Trk #", so long as the cell on "Checklist ???" is populated (i.e, if a cell on the target row of "Record" has a value, but it's blank on "Checklist ???", then "Record" wins; if it's blank on "Record", but populated on "Checklist ???", the Checklist wins. If both populated but different, then Checklist wins.If a "Trk #" exists on "Checklist ???" but is not on "Record" then add the line to "Record" (the 1st empty row, table size remains)I see no need for any "delete" at this time.

My concerns: The last column on record (column #16) is the filtering column for the worksheet copy event and needs to be left alone (it's formulated to produce a "Yes" or "No")I would like the ability to adjust table sizes if needed without modifying the macroThe table rows on "Checklist ???" will not be changed, deleted, or altered in any way by the macro.

View 2 Replies View Related

Macro To Copy Data From Sheet 1 To Multiple Pages On Sheet 2 In Correct Cells

Jan 15, 2009

I have attached a 97-2003 .xls file with data for multiple store locations on sheet 1, and the desired result on sheet 2. I am actually using excel 2007, but I dont think I need any special features that it provides.

I will try to explain the issue here without opening the attachment.

Here is an example of the Data on Sheet1

View 13 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved