I have a very simple excel with three columns Name (column A), Date (column B), Hours (column C). I want the excel to autosort upon opening so the data is sorted by date. I right-clicked on Sheet 1 and put this in (I found it online):
Private Sub Worksheet_Activate()
Application.ScreenUpdating = False
Range("B1").CurrentRegion.Sort Key1:=Range("B1"), Order1:=xlDescending, Header:= _
xlGuess, OrderCustom:=1, Orientation:=xlTopToBottom, _
DataOption1:=xlSortNormal
Application.ScreenUpdating = True
End Sub
I am looking for a way to auto sort the info in column A based on the numerical account number. The auto sort also should move the rest of the info in the row along with column a. I want this auto sort to happen once a new entry has been entered with all the information in columns A -L.
Basically the goal is someone with very little knowledge about excel or computers in general can enter information in all 12 columns and then the table will auto sort itself based on the account number.
As you can see from the attached spreadsheet. I have a page called Pattern Etch where we enter the data for all the processing done in a single machine. Each device type is slightly different, and therefore has a different calculation fasctor for its etch time. This all weorks fine. What I had previously was another spreadsheet with the pages b and g in it. This is where the factors are calculated and updated from.
I'd like to make this update automatic, and suspect the easiest way is to combine the two spreadsheets, as in the attached version. Can the sorting of the data from the patternetch page to the apprpriate pages, b and g be done automatically? If so can it be done for many pages as I have cut down the spreadsheet, I actually have 50 variants, each will need its own page (as for b and g).
I have an excel WS1 set up as DB; I want to keep this sheet for data revision. WS2,3, 4, & 5 will be data that is filtered and sorted, using WS1 as source so I want to auto copy the WS1 data. Can I just auto copy WS1 (how do I do that?) then filter and sort in each WS?
I am trying to combine rows of data, each 4 cells long from multiple worksheets into one master sheet. I need to know if there is an easy way to do this and also I would like to setup an Auto Sort if possible to automatically sort the rows by date.
The data that will be transferred is: Date, Amount, Description, and Company Billed. I have my workbook organized by a Vendor per worksheet and would like to have the data I enter inside the vendor worksheet to automatically transfer to the master sheet and sort by date.
I have a spreadsheet that I am running for world cup score predictions where people predict the result and depending on right users score sheet when I update the actual result workbook it gives them either 3 points for the right result or 1 point for the correct winner or draw of a different scoreline. All this data then feeds through to a league table of the current points.
How I would modify the macro below that when i enter the game scoreline it will automatically sort the league
This macro is currently on the league worksheet but I am guessing I need a macro on the results worksheet as well to activate this
Private Sub Worksheet_Change(ByVal Target As Range) If Target.Column = 2 Then Range("A2:D23").Sort _
Im am looking for a way of automatically sorting the data I have in column "C" (C2:C99 to be exact).
The data represents stock codes which are a mix of text and numbers, starting with 1 letter followed by numbers.
I would prefer something I can put in the sheet tab view code section, so that when any new data is added or altered it automatically sorts the stock codes in to alphabetical then numerical order
My problem this time is in regards to auto sorting a table as data is changed in another worksheet and is auto copied within the said table.
I.E. I need the Fax page (second last), the table has to auto sort based on column " C ". This is easily done using custom sort but can it be done automatically ? I want to lock the page so nobody modifies it.
I attached a copy of my work so far, using Excel 2007.
All the sheets are locked except " Player DATA " and " Fax ".
I need to sort my data by the oldest date first in colum L (NEED_DATE), but I need to keep the rows grouped by colum A (Material No). See example of data.
Material No Tool No Prodn Ordr No Curr Oper No Curr Workcenter Cd Next Oper No Next Workcenter Cd
A1 - Header - "Holidays in XXXX' B1 - Header - "Holidays in YYYY' C1 - Header - "Leaves by YOU"
A2:B11 have static dates consisting of 10 dates in each column. C2:C11 - the user may enter any date at any point of time.
I would like to auto-merge the dates in all the 3 columns (A2:C11) in a single column say D2:D31 and then the system should auto-sort the column based on dates in any one order. So as soon as the user enters a value in say cell C2, all the 10+10+1 dates should get sorted.
Also the constraint here is a user may not apply all 10 leaves at in a year. So many of the cells may have blank values.
What I want to do is if I add data into B7 or F7 then the current date will appear in J7. I also don't want the date to change every time the project is opened.
Thus,
If I enter "withdraw or any word" into B7 or F7 - The current date (4-Dec) would appear in J7.
then if I close excel and I open it tomorrow, J7 would still read as 4-Dec, while if I enter "deposit or any word" into B8 or F8, the current date (5-Dec) would appear in J8.
- would need to be able to enter multiple entries on one day as well.
I am building a budget spreadsheet and would like the date to automatically populate in column H when data is entered into rows J through AN, or alternately update column H when a sum total is populated in column I
I need to repeat this for rows 4 through 63
I was trying to use the following code, but cannot get it tweaked right.
There are only 3 columns, A, B, C and only 10 rows but I would like it to sort automaticaly. I enter data on other sheets and it is loaded automaticaly back to sheet 1 after some calculations are made. I would like the data on sheet 1 to sort automaticaly on column C keeping the rows of data intact.
I am trying to figure out how to auto sort information on a spreadsheet so that when update notes are added by date at the bottom of the list, they are automatically sorted (moved) to the top of the list so the latest update is shown first. I am pretty clueless when it comes to macros although I have given it some attempts after reading other posts without success. I am including a copy of the spreadsheet. The info that I need sorted starts at B43:E43 and goes to B104:E104. That same sort info would then be used for the similar info to the right of this one. For example everything on the line B43:E43 would move together.
I have data going in to a small table which has some empty rows as that data is not yet available... My problem is, I need to sort this table in date order but with the date nearest to today's date at the top...
The sort function puts oldest at the top or oldest at the bottom which is no good for what I need...
For some reason I have a worksheet that won't sort stuff by Autofilter any more. I built it as a customer database but for some reason today I just can't get the names to ascend or descend. there is something simple I can check for, I can post an empety sheet if needed but right now I can't really post a list of all my customers info.
Is it possible for a column of "sums" to auto sort from largest to smallest? I have a dashboard with 20 charts and I want them to show in the order of largest to smallest but its rolling data so it changes daily.
I'm trying to learn how to do auto sort. I Know how to do the custom manual sort but it is taking to long to do my spreadsheet every night. I love to play the greyhounds but to manually sort 18 columns a race with 15 races each night takes a while there has to be a easier way.
here a sample of what I'm trying to do. The columns are in two C-D E-F G-H I-J and so on. The rows here are 7-14 as you see I have to sort some high and some low. Is this possible to do a auto sort for each set of columns
Need to add an auto sort code to the end of this worksheet module 2, so that after all the dates are figured, it will sort by this date, no matter how many dates there are.
I have created a spreadsheet using columns A to G with row one as the following headings Surname, Middle Name, First Name, Alias, Offences, Temp# and CRO#.
The thing is I tried writing a VBA code to let the Surname(column A) automatically sort in ascending order but it doesn't work.
where sorting begins in Column A with the range A2:A5000 and at the same time row one being frozen.
I have the below small code which auto sorts information in column A & B but I am having trouble trying to get it to sort from row 3 and not sort the first 2 rows. The first row is the column header the second row I want left blank and then sort after that.
Plus at the moment after I enter something into column A it auto sorts itself but what I would really like to do is have it commence the auto sort after I have entered information in column B and pressed "enter". Because at the moment I enter info in column A then it auto sorts itself then I must then find it and then enter the info into column B.
Private Sub Worksheet_Change(ByVal Target As Range) Dim rg As Range Set rg = Columns("A") 'Column containing names to sort If Intersect(Target, rg) Is Nothing Then Exit Sub Range("A:B").Sort key1:=rg.Cells(1, 1), order1:=xlAscending, header:=xlGuess End Sub
I have a worksheet in Excel which contains scores for a quiz I am organizing. The rows contain the team names, the columns the scores per round per team. I would like to have the worksheet automatically sort the columns in descending order (so that the winner will come out on top after the quiz has finished), everytime I change something (everytime a score is updated). I can't find anything in Excel which would allow me to do that, so I'm guessing it's only possible in VBA? Unfortunately, I don't know anything about VBA, so I'm stuck.
These are the ranges I would like to have sorted, in order of priority:
Row 1 is the row with the column titles (Round 1, Round 2,...). C2: C26 N2:N26 M2:M26 L2:L26 K2:K26 J2:J26 I2:I26 H2:H26 G2:G26 F2:F26 E2:E26 D2:D26
I know that I could just click sort, decending, "points" etc but I figure there must be a way of it auto updating.....
Please see the attached file - I have attempted doing it with Ranking Formula but forgot that it would just give me error messages when two have the same points so I got rid of that.
Have tried doing it with other formula found on this website and others, however I appear to be stuck. I might be doing it wrong but as I'm not manually putting in the "points", they are being worked out with =( SUMPRODUCT((H4:H16={"W","D","L"})*({3,1,0}))+58) for example, it does not move their position.
What I would like it to do:
1. People select from drop down list whether they think the team will W, D, L 2. The Table to the right should automatically change the points dependant on the result 3. The Teams position should change automatically in line with their new points total.
I've written a fantasy football programme, however i'm having trouble getting the table to auto sort. alter one of the values in the wins tab, then goto the scores tab to see that they don't auto sort.
I am trying to create a VBA macro that autosorts a selection of columns by column A. I currently have the below already written which gives the desired effect. I was just wondering if there was a way i could have this script constantly running on the sheet so it is always sorted correctly without me having to click Run Macro everytime.
Sub Macro1() Columns("A:F").Select Selection.Sort Key1:= Range("A1"), Order1:=xlDescending, Header:=xlGuess, _ OrderCustom:=1, MatchCase:=False, Orientation:=xlTopToBottom End Sub
I am now trying to create a excel macro to auto populate all the dates with reference to a start date and end date. The catch is that only working days are required in the range. My reference cells (start and end date) are in Sheet 1 while the destination cell range are in Sheet 2. The reason for creating a macro instead of a function is that the intervals between the start date and end date changes frequently (annual, semi-annual and quarterly) Best case scenario would be a button which I can just press after i input the dates to generate the range of dates in another sheet.
