Auto Sort A Table As Data Is Changed In Another Worksheet
Jan 20, 2010
My problem this time is in regards to auto sorting a table as data is changed in another worksheet and is auto copied within the said table.
I.E. I need the Fax page (second last), the table has to auto sort based on column " C ". This is easily done using custom sort but can it be done automatically ? I want to lock the page so nobody modifies it.
I attached a copy of my work so far, using Excel 2007.
All the sheets are locked except " Player DATA " and " Fax ".
I have an excel WS1 set up as DB; I want to keep this sheet for data revision. WS2,3, 4, & 5 will be data that is filtered and sorted, using WS1 as source so I want to auto copy the WS1 data. Can I just auto copy WS1 (how do I do that?) then filter and sort in each WS?
I've written a fantasy football programme, however i'm having trouble getting the table to auto sort. alter one of the values in the wins tab, then goto the scores tab to see that they don't auto sort.
I have a adjusting table which auto sorts based on the latest weeks results.
If one of the results is an N/A (There is no data for the site that week, the table will auto sort this value to the top. How do i get it to move any errors to the button of the table?
I've attached a sample worksheet : Table example.xlsm
I have a football pontoon league that works on goals scored, what I am tring to do is to be able to auto-sort the league on the right of the document when I amend the numbers on the table on the left of the document.
Saw quite a few threads on auto sorting but nothing that solves my problem: Sheet 1 has two columns, column A has names and column B has numbers. These numbers are manually entered, and there are duplicate values.
Sheet 2 has to present the same names and numbers in ascending sort order. I cannot use macros due to security restrictions. I can accomplish it using a combination of functions LARGE and INDEX, if the values are not duplicated. But that technique fails when there are duplicate values.
In other words, Sheet 1 has:
NAME VALUE Bob 5 Joe 2 John 5 Sue 3
and Sheet 2 should auto sort these values and give us:
I have a worksheet in Excel which contains scores for a quiz I am organizing. The rows contain the team names, the columns the scores per round per team. I would like to have the worksheet automatically sort the columns in descending order (so that the winner will come out on top after the quiz has finished), everytime I change something (everytime a score is updated). I can't find anything in Excel which would allow me to do that, so I'm guessing it's only possible in VBA? Unfortunately, I don't know anything about VBA, so I'm stuck.
These are the ranges I would like to have sorted, in order of priority:
Row 1 is the row with the column titles (Round 1, Round 2,...). C2: C26 N2:N26 M2:M26 L2:L26 K2:K26 J2:J26 I2:I26 H2:H26 G2:G26 F2:F26 E2:E26 D2:D26
I'm using a total of 20 Rows and 2 Columns. Each row has Column A for Description and Column B for Score. There are total 10 subjects with 10 noneditable rows, and 10 editable rows.
I'd like to protect column A and B for rows 1 to 10 and unprotect only Column B for rows 11 to 20. When any cells from Column B, rows 11 to 20 updates, I'd like to automatically sort columns A+B for ONLY rows 1 to 10.
Therefore, rows 1 to 10 need to be sorted based on the scores on Column B, and since rows 11 to 20 are just input fields, they are never to be sorted.
Column B for Rows 1-10 will be formulas and are based on Column B values from rows 11-20.
When a value in any of the rows 11-20 of Column B is updated, Range A1:B10 will automatically sort from highest score to lowest score (Column B).
Since Column B for rows 1 to 10 contains formulas and not actual values, would it throw off the order of things when sorting formulas?
the macro coding to perform this task.
Here is just a visual of what the spreadsheet will look like
I have created a pivot table that is connected to an input sheet with data. The input sheet retrieves data automatically from a external source through an add-in to Excel. When updating data the fields expands, but only for the items which have been changed. I want the table to be updated automatically, but not the fields expand automatically. Is there any pivot options to prevent this problem?
It should be mentioned that the pivot table is not directly connected to the input sheet (which is updated from the external source), but from a "help-sheet" reflecting the input sheet with some additional columns. I use conditional formatting and name range in the pivot.
As you can see from the attached spreadsheet. I have a page called Pattern Etch where we enter the data for all the processing done in a single machine. Each device type is slightly different, and therefore has a different calculation fasctor for its etch time. This all weorks fine. What I had previously was another spreadsheet with the pages b and g in it. This is where the factors are calculated and updated from.
I'd like to make this update automatic, and suspect the easiest way is to combine the two spreadsheets, as in the attached version. Can the sorting of the data from the patternetch page to the apprpriate pages, b and g be done automatically? If so can it be done for many pages as I have cut down the spreadsheet, I actually have 50 variants, each will need its own page (as for b and g).
I need to use the Worksheet Change event in a particular sheet in a specified column which works fine if the data is already there in the sheet and then changed however,the data is in this sheet is actually a Sub-Set of a Main sheet i.e certain filtered records are being copied from Main Sheet and then copied to this IBSL Sheet.
After the data is copied I have to check each record manually and then categorize each record as Fresh , Rebooked , Cancelled , Tranch or On-Hold.....These 4 criterias are added in the Column 38 and the same thing has to be repeated in the column 40 , so when i change the data in the column 38 the same category has to be updated in the same row in the column 40..
But the problem is that the data is first copied from the Main Data Sheet into the IBSL Sheet using a Macro so then this even t gets fired and goes in the DEBUG MODE...
I need this to happen when i change the category manually..I am adding data validation at the same time while copying the data in to the TEMP sheet.
I am trying to combine rows of data, each 4 cells long from multiple worksheets into one master sheet. I need to know if there is an easy way to do this and also I would like to setup an Auto Sort if possible to automatically sort the rows by date.
The data that will be transferred is: Date, Amount, Description, and Company Billed. I have my workbook organized by a Vendor per worksheet and would like to have the data I enter inside the vendor worksheet to automatically transfer to the master sheet and sort by date.
I have a spreadsheet that I am running for world cup score predictions where people predict the result and depending on right users score sheet when I update the actual result workbook it gives them either 3 points for the right result or 1 point for the correct winner or draw of a different scoreline. All this data then feeds through to a league table of the current points.
How I would modify the macro below that when i enter the game scoreline it will automatically sort the league
This macro is currently on the league worksheet but I am guessing I need a macro on the results worksheet as well to activate this
Private Sub Worksheet_Change(ByVal Target As Range) If Target.Column = 2 Then Range("A2:D23").Sort _
I have a very simple excel with three columns Name (column A), Date (column B), Hours (column C). I want the excel to autosort upon opening so the data is sorted by date. I right-clicked on Sheet 1 and put this in (I found it online):
Private Sub Worksheet_Activate() Application.ScreenUpdating = False Range("B1").CurrentRegion.Sort Key1:=Range("B1"), Order1:=xlDescending, Header:= _ xlGuess, OrderCustom:=1, Orientation:=xlTopToBottom, _ DataOption1:=xlSortNormal Application.ScreenUpdating = True End Sub
I want to show which rows of data have been changed by incrementing a revision attribute. For example, if a user changes the contents of a cell anywhere between rows 2 and 13 and col 1 and 9 then the revision attribute in col 10 would increment from 1 to 2 (for the affected row). If another change affects the same row then the rev attribute would increment to 3, and so forth. I don't care which cell was changed only that something on that row was touched.
I thought the CHANGE event was a dead ringer for triggering some VBA code to control this but, since part of the change event code writes the revision value, this triggers another CHANGE event causing an endless loop until something (??) kicks in and stops it after 220 iterations. Is there a way to inhibit the change event just prior to updating the cell containing the version attribute?
Rather than post the code here I have submitted the workbook that includes the whole setup and code. I should also mention I looked at all the other worksheet events and I do not see any "triggers" that would fire each time a cell content is changed. As a side note, is there a way to step into the code of a change event? F8 does nothing.
I have created a table in Excel 2010 (pls see attached table named post.xlsx).
Then copied the above table into PowerPoint 2010, using "paste link" (I tried to attach the PowerPoint file but the system says "invalid file type" and I cannot attach it).
Question:
I have received income data for another month - the new month is 13 and the corresponding new income is 100. I typed 13 and 100 into the Excel table post.xlsx and thus extended the table by another column.
Then I went back to PowerPoint slide, then right clicked on the table there, then clicked "update link".
Specific Question:
The newly-typed column in Excel table is not get updated in PowerPoint table.
I have enable Refresh on Open for my excel pivot table, but user need to click "Enable Automatic Refresh" , only solution i came across is to change the registry setting. Which i dont have access to edit registry(admin disable the access).
Alternate solution i try to use Access macro to automate the process and use Outputto save it as a excel file A. Then use excel file B to update pivot table from excel file A.(as excel A data is always latest) The problem is i will get "....A file name already exist...do you want to overwrite.." prompt. Which defeat the automate process.
Any other solution to enable the automatic refresh on open the excel workbook?
Or Access can overwrite the exist file or save it as another file name with timestamp ?
Im am looking for a way of automatically sorting the data I have in column "C" (C2:C99 to be exact).
The data represents stock codes which are a mix of text and numbers, starting with 1 letter followed by numbers.
I would prefer something I can put in the sheet tab view code section, so that when any new data is added or altered it automatically sorts the stock codes in to alphabetical then numerical order
The # of days column will be a manual input. Then I have a larger table that will take those values and convert them to look like this: (Obviously the dollar values are pulled from somewhere else)
1 DTX $ 1,292.00
2 DTX $ 1,292.00
3 DTX $ 1,292.00
[code]....
I've been thinking of trying to use a macro but not sure that is the best way. Using a button or something doesn't seem very elegant either.
I used the "record macro" to record a simple sorting (high to low) of columns A-F based on values (0-3) in column A. Everything works when I initially institute the macro. However, when I change anything or add a new item at the end of the list, the order reverses and sorting goes from lowest to highest.?
Here is what ended up in the macro:
Code: Sub SortColumnA() ' SortColumnA Macro ActiveWorkbook.Worksheets("Sheet1").Sort.SortFields.Clear
[Code]....
I noticed that it only includes a fixed value for the length of the list (row 90). Is there a way to have it increase when anything new is added?
As of now I plan on just making an arbitrary large index (~200 ish) to automatically grab anything new.
I am copying data from worksheet "Microsoft" to another workbook and paste in sheet1, i want the cell G1 to auto input the worksheet name "Microsoft" where i copy the data from,
How to have G1 show the worksheet name after i copy and paste the data from worksheet name "Microsoft".
I have 3 pivot tables on the same page - they all have the same PAGE and ROW fields, just different column and data fields. (may seem weird, but I'm producing reports for non-Excel people and this seems the only way to display info in user-friendly way).
Problem: If a user changes the selection in a Page field, I need the other 2 pivot tables to automatically select the same Page field, so the pivot tables are still all like-for-like.
I've started writing a macro which I can run to do this - below - but
1) I need it to run automatically when any of the page or row fields are updated
2) my macro is probably far too basic for my needs - one of the page fields has 245 values, so the below isn't really going to cut it!...
I have a spreadsheet with 3 tables (all side-by-side). Table one has 8 rows of data; table two has 2 rows of data; table three has 3 rows of data. I am looking for assistance on how to sort each table in desceding order (by sales). Basically I want to do a sort everytime there is a change of values in any of the tables. I have attached a sample spreadsheet to clarify the table layout and the manner in which the values change within each table.
I need to format some information in an Excel file, before exporting it. All the pivot table information I have found online is primarily for account management, using counts and sums. The data is currently in this format:
am working on a spreadsheet that requires sorting a list of names and numbers. The numbers have a sum formula attached. I can set up the macro to sort the list fine by selecting the appropriate cells and creating the macro.
The code for this is below
Sub SurnameSort() ' ' SurnameSort Macro ' Sorts by mechanic surname '
' Range("A10:H13").Select Selection.Sort Key1:=Range("B10"), Order1:=xlAscending, Header:=xlGuess _ , OrderCustom:=1, MatchCase:=False, Orientation:=xlTopToBottom, _ DataOption1:=xlSortNormal End Sub
However, I want the macro to still be able to sort the data when I add new rows to the list later on. In other words, the code above in bold somehow needs to be modified so that "H13" extends as far down as needed.
I have Sheet1 "MASTER" and Sheet2 "Area1" and Sheet3 "Area2" etc...
My MASTER sheet has a list of employee names and the areas they work in. I have employees working in different areas, and I want to pull a list of employee names from the MASTER working in Area1 (sorted on the MASTER sheet) to column A on Sheet2, then pull a list of employee names working in Area2 to column A on Sheet3, etc...
I want it to do this in such a way that if I add an employee to Area1 on the MASTER data, it will populate that employee in the Area1 Sheet.
So basically, I'm looking at one column on the MASTER sheet to see if the area matches. Then looking at another column on the MASTER sheet to get the name. Then taking that name and transposing it to a new sheet corresponding to the area they work in.
I've attached a sample sheet. I want Column A in the Area1 sheet to reflect all names that show up on the Area1 LIST on the MASTER sheet, and nothing else. I'm using VLOOKUP to pull the rest of the data from the MASTER table.
There is a new sample workbook up now. Couldn't update it sooner due to site outage. I've removed irrelevant data to improve readability and focus on what I'm trying to achieve. Again, the main issue is scraping column E from the Master, and populating a list of all employees who match certain values in Column E on the Master in Column A of the other tabs.
