What I want to do is if I add data into B7 or F7 then the current date will appear in J7. I also don't want the date to change every time the project is opened.
Thus,
If I enter "withdraw or any word" into B7 or F7 - The current date (4-Dec) would appear in J7.
then if I close excel and I open it tomorrow, J7 would still read as 4-Dec, while if I enter "deposit or any word" into B8 or F8, the current date (5-Dec) would appear in J8.
- would need to be able to enter multiple entries on one day as well.
I would like to make a list of vehicles with auto servicing dates appearing in the next column. How can I do this, example would be say 30/11/2008 was the last service, next column would be next service due 30/02/ 2009 and then a column next to that to say when service was done.
Pretty simple but I can't seem to get it to auto bring up the next service date which would be in 3 months time or 90 days.
i try to lock cells in the area the VBA code affects. My goal is to actually have affected cells by this VBA code lock immediately after anything is entered in the affected cells. Area needing Debugging is in the If - Else portion. My worksheet will be protected.
Private Sub Worksheet_Change(ByVal Target As Range) Dim LLoop As Integer Dim LTargetRange1 As String Dim LDestRange1 As String LLoop = 10 While LLoop <= 1000 'Link column B to A LTargetRange1 = "B" & CStr(LLoop) LDestRange1 = "A" & CStr(LLoop) If Not Intersect(Range(LTargetRange1), Target) Is Nothing Then If Len(Range(LTargetRange1).Value) > 0 Then Range(LDestRange1).Value = Date Else Range(LDestRange1).Value = Null End If End If LLoop = LLoop + 1 Wend End Sub
On sheet 1, I have dates in column A, then numbers under LabA through C. On sheet 2, I would like the contents of columns B, C, D to autofill when entered. However, I would like to display only the last entry. For example, Lab A (column B) is currently showing "7" in cell B6, if I enter a number in B7, I would like for sheet 2 to autoupdate cell B3 and display that new entry instead of the "7".
I am trying to get excel to auto populate the current date and time each time I make an entry, however, each time i make an additional entry the current date and time populates but it changes all the prior entry's with that current date and time.I am trying to keep a log of all the times I make a new entry. Correct formula that will work?
We're trying to use one template to enter data with users being able to start entry from a number of different starting points. this changes they way the look-ups have to work. The attached sample explains it a whole lot better.
If given columns B and C, is there a VBA code that will look to those columns and auto-enter the payments across the week matrix based on that criteria?
I am attaching the example where I need to lock H2 to H1000, note that sheet is locked "anixter12 and I have also given range to user for modification I simply want to lock cells in H once date is entered.
I'm trying to create a rental data base. The Items in question have 2 details, a Pokemon and a Gender. Each item also has a location but this changes.
So far the search formula works nicely, but there needs to be some way to know what items have been removed from their locations.
There needs to be some way to change the location on the 'database' sheet layer to "OUT" from the 'search' sheet layer.
E.g. (on the example file attached)
In a perfect world I would like to be able to search for a couple of pokemon, then to click on "pokeball GO!!!" and for this to change the location to "out" on the 'database' sheet layer.
I am looking to create a macro that will create a new sheet when data is added on a summary sheet. Example.
1. Summary sheet called "Variations" contains columns that will contain the information needed for new sheet (Columns A to D)
2. When data is entered on "Variations" sheet: Column B, then macro automatically creates new sheet renamed to e.g. VO1 (Number used on "Variations" tab) and is a copy of "Master" tab.
3. Data entered in Column A to D on "Variations" tab is automatically entered onto new sheet created (e.g VO1). Shown is blue on attached file. Additional data is updated on "VO1" sheet and this then links back to "Variations" tab
I have 13 columns - 12 representing each month of the year and then a total. I start in F15 with Jan and end in R15 with the total - this is the heading row.
Below that I have my numbers for each month. Here's what I need to do: Anytime the total changes (by updating the monthly numbers), I need the day's date to be automatically entered into F14. This way I know the last time the data was changed.
I use the same number as a lookup value in several sheets(say 1-10). The number can only be changed in sheet 1, the others referring to it. So if you want to use a different value in say sheet 9 you have to return to sheet 1 and change it, then back to sheet 9. Is there any way that a number can be inputted into ANY of the sheets and change ALL of them, without using macros? I've searched long and hard for the solution to this, I'm sure it's either a trivial answer or a trivial question that doesn't deserve an answer.
On Sheet1 I want a macro that looks for the last used cell in Column D and then put tomorrow's date into column A, 2 cells below where the last used data was found in col D.
I then want to copy the entire contents of sheet2 and paste it into the cell below where we enter tomorrow's date.
I took an Excel course in college but am a bit rusty. I have a customer database that I created and I would like to see certain things after entering a date range that I specify. I uploaded a small excel sheet to show my database and what I'm looking to do. Basically I would like to enter a date range and see these answers:
Total Orders in that date range Total unique orders in that date range List of customers (name included) who ordered more than once in that date range
The only columns of data I need to use are: firstname, lastname and orderdate.
I have used data validation to colour rows in one of my spreadsheets at work. The column that uses the data validation is the first column and has a drop down list of 5 words. One of which is collected, which currently indicates when the card has been collected by the individual in question and no further attention is required. It colours the rest of the row green. There is also a column that is entitled 'Date Collected'. Instead of having to input this manually, is there a way to automatically enter the date to be the date that the 'Collected' value was selected?
The title is misleading, I realise there will need to be some sort of IF statement in the 'Date Collected' column. It's been a long day already.
I have a spreadsheet where a date is entered in column A with data in B-F. I am trying to write code to look in column A for a specific date and enter additional data into columns G-L on the same row. It needs to be able to skip the rows that are blank. So I have the dates of 12/1, 12/2 and 12/3 in column A rows 1,2 and 3 and I want to enter data for 12/2 on row 2 skipping the blank cells in row 1 for 12/1. Here is the code I have below.
VB:
Private Sub CBSecure_Click() Dim my_name As String Dim r As Variant Dim l As Long sFind = DockDoorCal.Value If Trim(sFind) = "" Then Exit Sub
Does anybody have a formula to use to auto enter an alphabet? With this formula I would like the last letter in the alphabet Z to be followed by AA, AB, etc. If I delete row 5 (letter E) I would need the letters to auto generate in order.
I really know nothing about vba so here goes. I would like to enter data in a row with 4 cells of info. then hit enter and return to the first cell and move the row down. all four cells must have data entered. and all four must move down. i tried some code as below i found and i modified but it did not work as expected. this moved the row down when returning the cursor to A2. It also should not copy the data style of the top row.
Private Sub Worksheet_SelectionChange(ByVal Target As Range) If Target.Column <> 1 Then Exit Sub Application.EnableEvents = False
I've exhausted my search engine skills and I'm about 99.9% sure Excel is incapable. This message board has been great over the years of figuring out even the trickiest of problems, but is there any functionality in 2003 or the slight possibility that after a user inputs a number in a cell (no tab, no enter) that it will move to the next cell.
After reading about this, most people say it is not possible even with VBA or Macro, and I certainly believe it, but the whiny, and horrible department that I work for are curious if this is possible. So, is it? If this is the wrong area for this questions, I apologize, I was considering putting this in the Macro/VBA area, but I gave up in deciding where to post this.
What could be the formula if i want a particular cell to auto sum the data input. For example if i click cell a1 and entered a number and again entered a number , the previous entry will be added to recent entry.
I have a very simple excel with three columns Name (column A), Date (column B), Hours (column C). I want the excel to autosort upon opening so the data is sorted by date. I right-clicked on Sheet 1 and put this in (I found it online):
Private Sub Worksheet_Activate() Application.ScreenUpdating = False Range("B1").CurrentRegion.Sort Key1:=Range("B1"), Order1:=xlDescending, Header:= _ xlGuess, OrderCustom:=1, Orientation:=xlTopToBottom, _ DataOption1:=xlSortNormal Application.ScreenUpdating = True End Sub
I'm running a macro to auto sort data and copy it to another page. One of the sort parameters is to only look at the data that has a blank in column 13. The code is as below:
If I have 3 fields: zip code, city and state; is there a way where I can have the user of my form enter their zip code and it will populate both city and state. I have the data, I just dont know exactly how to code it.
