i have two column of dates A & B as shown below.Among these two columns i want to check the existence of a date range 21/08/2009 to 25/08/2009.I want to check where-2 this date range is existing in the given column ....
View 9 Replies
I d like to test for the existence of text in range D5 to D10000 for example
I may have this 49000897890VGN21SP. VGN21SP is text so I d like to spot it
it may also exist on its own VGN21SP can you suggest me with a macro?
like this one
Sub DeleteNAs()
Dim C As Range
For Each C In ActiveCell.CurrentRegion
If C.Text = "#N/A" Then C.ClearContents
Next C
End Sub
if there's a way I can verify that a custom add-in is active? My company uses an add-in to allow end users to construct several types of API calls. My program depends on that add-in to be installed. I'd like to try to detect the add-in and halt the program if it's not there.
View 3 Replies View RelatedI have a macro tht deletes sheets from my workbook. How do I check if these sheets exist before deleteing them? Thus so that
Worksheets("MySheetName").Delete
Does not generate an error if "MySheetName" doesnt exist?
i am using VBA to handle a pivottable in excel. i am using pt.PivotFields("Position Status").Orientation = xlHidden to hide a field. but what if this field is not there in the first place? how should i put a "if" clause so that if this field is not there, i can skip this and go to next action?
View 2 Replies View RelatedI have a worksheet with a several pivot tables on it and this number can vary. I want to do, is check if a table with a given name exists, and if it doesn't create it, but if it does, to just .RefreshTable. I tried to use
View 2 Replies View RelatedThe workbook will consist of at least two pages:
1. A user input page
2. A records page
On the user input page, there will be two fields to enter information in... one for an exact address (ex: 600 n. nowhere) and one for a casual address (ex: On Nowhere street south of Anywhere Blvd). On the records page, I'm going to keep all the addresses and their corresponding casual addresses so that in the future, I don't have to keep inputting both.
What I'm looking to do is have a formula/function/vba code check the exact address against my records for it already existing -- and if so, pulls the corresponding casual address. For example, if last week I entered 600 n. nowhere and then transferred it into my records and then this week, I again entered 600 n. nowhere, the workbook would find the record and place the casual address for me.
I am trying to check for the existence of a record in an access table and do one of the following:
1. If the record exists, overwrite it in the table.
2. If the record doesn't exist, add it to the table.
I'm having real difficulty with the VBA code to check an Access table for the existence of a specific record, and then overwrite. I can do it with dates, but I'm looking for a unique record ID "300112_1_II" and it's trowing up a "Type mismatch" error.
For testing purposes, I'm using the following parameters:
Field = Field_1
Table = TBL_1
Record ID = Test_Record
Basically, I want to check Field_1 for the existence of Test_Record and then either edit the other fields in the record or add a new record, depending upon what it finds.
I need to perform a lookup with multiple criteria.
I am attaching a sample file.
Sheet 1 contains 3 columns
A - Report
B - Name
C - Date
Sheet 2 contains 2 columns
A - Name
B - Date (where results are to be placed)
Basically, I would like column B, Sheet 2 to be populated with the Date from Sheet 1, column c if . . . .
2 criteria
1) column A, sheet 2 matches column B, sheet 1 and
2) column A, sheet 1 = ABC
I keep getting a FALSE or #N/A results.
I use the code below to check and see if a sheet exists or not when a workbook is opened. If it does not, continue. If it does I need to run a different sub on it.
Twist, I need to check for a hidden sheet. How would I chg the code to do this?
Private Sub Workbook_Open()
'Also need to check the code in the userform. Has On.Time command.
'SplashForm.Show
Sub Sheet_Test_1()
Dim sh As Worksheet
On Error Resume Next
Set sh = ActiveWorkbook.Sheets(" total")
If Err.Number <> 0 Then
MsgBox "The sheet doesn't exist"
Err.Clear
On Error Goto 0
Else
MsgBox "The sheet exist"
End If
End Sub
I am now trying to create a excel macro to auto populate all the dates with reference to a start date and end date. The catch is that only working days are required in the range. My reference cells (start and end date) are in Sheet 1 while the destination cell range are in Sheet 2. The reason for creating a macro instead of a function is that the intervals between the start date and end date changes frequently (annual, semi-annual and quarterly) Best case scenario would be a button which I can just press after i input the dates to generate the range of dates in another sheet.
View 1 Replies View RelatedI have a employee travel spreadsheet with air travel dates in two columns. I want to be able to create a rule that will highlight all the cells in a row if the date range on that row fall includes today's date. if someone is traveling in the event there is an emergency and I need to know if they are traveling that particular day. I have attached a sample spreadsheet.
View 3 Replies View RelatedI need to create formulas that reference a single date and output date ranges. The objective is to have a person input a Monday date in any given month and receive a four weeks out worth of dates and ranges. For example: In a lone cell, the person inputs 10/13/08. Automatically, the sheet produces the next full week range: October 19 – October 25 in a single cell and also produces a cell for each date. Example: Sunday 19, Monday 20, Tuesday 21, etc…. It should look like:
Monday Date:
10/13/08
October 19 – October 25
Sunday 19
Monday 20
Tuesday 21
Wednesday 22
Thursday 23
Friday 24
Saturday 25
and then repeat for three more weeks. I thought I had it figured out until the month changed. The dates continued in October instead of adding a month. This report will be ran weekly, so simply adding a +1MONTH to some cells will not benefit me as I’ll have to change the formula every week. I want the formula to compute the data without any manipulation over the next several years. The only change will be the Monday date.
I have a table that looks like this (its basically a historical data of a stock exchange):
Date
Index
January 4, 2010
[Code]....
The List continues till the current Date.
I want to calculate Average Index Values of a Date of each month within a Date Range.
Example: Calculate Average Index Values for 3rd of Each month from 1st Feb 2010 to 3rd Jan 2011. Formula should calculate Average of the Index Values for 3rd Feb 2010, 3rd March 2010, 3rd April 2010, 3rd May 2010, 3rd June 2010, 3rd July 2010, 3rd Aug 2010, 3rd Sept 2010, 3rd Oct 2010, 3rd Nov 2010, 3rd Dec 2010, 3rd Jan 2011.
Both the Date and the Date Range is variable. Also, the Index Value for selected Date of one or more month may not be available as that being a holiday. In that case, the formula needs to use the last available Index Value before that Date. e.g. If Index Value for 3rd Oct 2010 is not available, system will use the Index Value of 2nd Oct 2010.
based on user date ranges entered on sheet1, I'm trying to write code that will write each month of the date range on other sheets across the 2nd row. at this point I'm getting "object required" error at "Set DateStart = Cells(2, 6)"
I also want the date format to be mmm-yy (Mar 14) on the sheets even if sheet1 has a different format. I tried using sourcerange instead of DateStart, but that didnt work either.
Code:
Dim projStartDate As Date
Dim projEndDate As Date
Dim DateStart As Date[code]....
i am trying to create a excel macro to auto populate all the dates with reference to a start date and end date. The catch is that only working days are required in the range. My reference cells (start and end date) are in Sheet 1 while the destination cell range are in Sheet 2. The reason for creating a macro instead of a function is that the intervals between the start date and end date changes frequently (annual, semi-annual and quarterly) Best case scenario would be a button which I can just press after i input the dates to generate the range of dates in another sheet.
View 4 Replies View RelatedLet's say I have thousands of employees, but I need to determine who worked for me during a particular date range, and all I have to go on is their start date in one column and their end date in another column.
If:
A1 contains beginning date of employment
B1 contains ending date of employment
C1 contains specified beginning date (criteria)
D1 contains specified ending date (criteria)
I need to compare three cells of random dates shown in Column E, F,& G with Row's H5:AK5, H7:AK7, H9:AK7 (the Dates to these rows is Static on row H3:AK3.) EX: ROW 5 has Start Date, End Date (1) and End Date (2). Compare Cell H3 between Start Date & End Date (1). If H3 falls between or equal to Start and End Date(1) then highlight cell H5. Proceed till AK3 (higlighting only the cells H5:AK5). Then compare cell H3 between or equal to End Date (1) and End Date (2) (higlighting only the cells H5:AK5). Then do the same for ROW 7 and ROW 9.
To make things a bit more difficult I need to have " WK#" in Row 14 (these WK# is on another tab called "Task" of the workbook) needs to be displayed in Row's H4:AK4, H6:AK6, & H8:AK8. EX: Compare Date in D15 between or equal to Start Date & End Date (1) then display Wk# in D14 in H4. Continue till all dates in
D15:Z15 are compared to Start Date & End Date (1) and WK#'s in Row D14:Z14 are inputted if applicable in Row H4:AK4, H6:AK6, H8:AK8. I hope this is not confusing. I can't seem to use the upload option so here is alink to download a jpg of the sheet
I'm trying to combine the hours that a employee worked on a single date, with one of multiple time periods that exist for that employee.
I have two sets of data.
Set 1 (hours)
Employee number, date, hours
12345, 1-2-2014, 6
12345, 1-3-2014, 8
12345, 1-10-2014, 8
Set 2 (periods)
Employee number, start date, end date
12345, 1-1-2014, 4-1-2014
12345, 6-1-2014, 1-2-2014
What I'd like to do is to add the start and end date of Set 2 to Set 1 for every row in Set 1
In above example the result should be like this.
12345, 1-2-2014, 6, 1-1-2014, 4-1-2014
12345, 1-2-2014, 8, 1-1-2014, 4-1-2014
12345, 1-10-2014, 8, 6-1-2014, 1-2-2014
I created a basic excel weekly budget and would like to know how much money I have as of todays date. on the top row I have a date range from Sunday to Saturday, so it looks like this:
09-15 16-22 23-29
with the month manually put in above it.
then below I have income and expenses with a Overall below that, so basically what I want to is see the Overall value based on todays date, not sure how to do this with the weekly range and automatic current date(which is =TODAY() as far as I know) I have attached a photo as a reference.
Budget Picture.jpg
way to search and display a date from a range of cells based on less than or greater than criteria. For example I have following dates in column A:
A1: 2011/01/04
A2: 2011/02/01
A3: 2011/03/01
A4: 2011/04/01
I want to search for the date which is less than 2011/02/01 from the A column and display that date in B1 cell for example. How do I do that?
I want to do this without using any macros.
I have an 'existing results table' as per my attached sample.
I have had help previously from this forum to create lists of 'sold' stock within date ranges (tax year periods) and these are represented as 'sold list' in my attached sample.
I now need to create a list of 'unsold stock' for each annual tax year end date; i.e. populate my table with items that have been created before the end of the date range and that have not been sold by the end of the date range.
Please can someone show me the formula on my attached sample?
Please see my example in red.
I am working with Excel07 however my attached sample is in Excel03 because I couldn't upload an XLSX file.
Is there a UDF that can determine the number of weeks for a date range specific that is not relative to the week number for the year but for the date range itself. i am aware of the weeknum function but this is for week number relative to the year. eg. date range 01/03/2008 - 31/05/2008 has approx 12 weeks and 14/05/2008 will be week number 10 for the range.
View 4 Replies View RelatedI've found similar queries on the site, but none seem to handle multiple dates, and my attempts so far have been futile!
Requirement:
I press a button on Sheet1 and am prompted to enter a start date and an end date.
Depending on the dates I enter, all rows on Sheet2 which fall outside the Start/End date range will be deleted.
All dates to be checked against on Sheet2 are in a single column, and all rows are populated, there are no blanks. Dates are in the format dd/mm/yy
I'm having a problem with data validation. I set an entire column so that it could only be a date between the first date in the list and the current date. I tested a few cells to make sure that it was working the way I wanted and I noticed that it allows a random number like 3 or 5 to be input after row 50. This would create a date in the 1900s. Why is this happening and how can I stop it.
I am trying the following:
I have sheet1 where column A has dates.
I have sheet2 which has specific dates in range AX3:AZ300
I am trying to have a formula ( Index) to match sheet1 dates to sheet2 dates. and if they match then it will return as True or 1 if not False or 0. Therefore avoiding any errors
I have done following formula but it does not work
[Code].....
I am working in excel 2010. I have a tracking document that lists free tickets and their expiry dates. In the adjacent columns we track redemption details of these free tickets. What I want to do is return the oldest expiration date from A only if the ticket has not been used (i.e. B is empty). This will allow me to see the date the upcoming tickets about to expire so we can make sure they are used.
A________________B
Expiry Date________Redeemed by
15/08/2014
15/02/2014
15/08/2014________John
15/02/2010________Marc
15/02/2011________Bob
I have a column of data that keeps getting new information in it. what i need is a named range that i can use for a chart, first point in the named range will be the first value in the column, second point will be avg. of point 1 and 2, then 3rd point will be avg. of 1,2,3 etc.
View 1 Replies View RelatedI like to create "templates" for files that I work with on a reoccuring basis, just to make things simpler. The current template I am working on tracks items processed by day and is used for two reporting purposes; 1 totals the pay ending items processed so I have the dates laid out based on the 2 week period with formulas for that. The 2nd way it is reported is by the month. Since this is a template, only the first day of the first pay period for a calendar year needs to be entered and the rest of the dates populate based on that date. What I would now like to do is add columns for January - December monthly totals using a formula that will read something like "if column A (where the date is) contains 1/1/2014 - 1/31/2014, then sum up column L" and than copy that formula for the remaining months.
View 8 Replies View RelatedI need to be able to query a large date range by a small beginning and end date range and return a count when the value is = each search criteria. i.e. - Search one year of dates from a table by Beg: 7/23/2012 to End: 10/21/2012 and return a count. The beginning and end dates are dynamic and I will need to reference the cells, i.e. B102 "Beg" B102 "End" and not a static date.
View 7 Replies View Related
