I have two columns, salesman and date. This workbook tracks quotes by salesman. I need to know how many quotes for each salesman by the month. So what I need to know is how quotes salesman 'a' had in January and February and so on. I have several worksheets in this workbook that are all formatted the same.
View 9 Replies
how to Chk the text string in particular cell, compare it with a super set column and get the full from of the text string from another corresponsing column and the output will be corresponsing full form of the chked text string?
View 6 Replies View RelatedI have problem comparing dates in two columns. In these columns, with dates, there can be instead of date letter "X". When I try to compare dates I don't get good results. I have to see that date in column P has been before date in column Q (example 22.02.2012 (P), 23.02.2012(Q), OK).
Code:
Sub test()
For Each oneCell In Range("Q2:Q60001")
Select Case oneCell.Value
Case Is "X"
If oneCell.Offset(0, -1) "X" Then
[Code] ........
I am trying to find out what formula I would need to use in order to have two columns compared. If the two columns have the same information I want the information from column 3 to be place in another particular cell.
View 2 Replies View RelatedI recently posted a similar thread which was very well supported but I couldn’t get a solution because my requirements were not clear enough. I would like to try again with a slightly easier and clearer requirement.
I would like a spreadsheet that compares and searches columns for text and returns true if a duplicate is found.
It is similar to a lottery checker except the lines being checked could be a string instead of a single character.
I have attached a spreadsheet which helps explain what I’m trying to achieve.
Basically, a user can sequentially enter a single character to cells F1:F5. These values are then compared to columns A:C. If one of the columns contain the values in column F then return true to G1.
macro to compare 4 columns of text (first and last names) then add a checkmark in separate columns if they match and don't match?
For example I have this kind of data to compare and the results required:
Sheet 1
Last Name First Name
Smith Mike
Johnson Bruce
Hendrick Fred
Shaffer Kerry
Sheet 2
Last Name First Name Match No Match
Klee Pierre X
Verge Kerry X
Smith Mike X
Wright David X
Hendrick Fred X
I need the macro to mark an X in the Match column if the first and last names match only and if they do not match exactly a X in the No Match column.
I have two columns containing dates (Date1 and Date2). Date1 is like a long date and Date 2 is a short date. I need a macro to compare these two dates and delete rows where Date1 <> Date2. Please find attached the before and after file which also contains the date formats for these two dates.
View 8 Replies View RelatedI have two identical web query's on the same sheet. One from column A to column I and the other one from column K to column S, and both have 404 rows. The one on the left (from column A to I) autorefreshes every 60 minutes and the one on the right (from column K to S) autorefreshes every 4 minutes. I want to subtract the numbers in column Q from column G and the ones in column R from column H, and in both cases if the result is bigger than 0 to place a timestamp in column Y(for Q-G), and in column Z (for R-H). I tried with NOW formula, but the timestamp changed every time the web query from the right autorefreshed, no matter of the result. I guess that I have to use VBA codes...but I'm not good at that .
View 9 Replies View RelatedI need to compare the date from the user input and the date listed on excel. How can I compare it? Is it correct? lngCmp = Val( Cells(I, 31))
Dim lngBegin As Long, lngEnd As Long, lngCmp As Date, lngResults As Long
lngBegin = 9 'beggining of data
lngEnd = 232 'end of data
lngCmp = InputBox("Please enter the date", "Begining of the week")
Lngcmp1 = DateAdd("d", 1, lngCmp)
lngCmp2 = DateAdd("d", 2, lngCmp)
lngCmp3 = DateAdd("d", 3, lngCmp)
lngCmp4 = DateAdd("d", 4, lngCmp)
lngCmp5 = DateAdd("d", 5, lngCmp)
'lngCmp1 = lngCmp + 1
'lngCmp2 = lngCmp + 2
'lngCmp3 = lngCmp + 3
'lngCmp4 = lngCmp + 4
'lngCmp5 = lngCmp + 5
lngResults = 0
lngResults1 = 0
lngResults2 = 0..................................
I need to compare two colums by number decription for example m344 in one column and fsh344-1 in another. All I want to match is 344. In column a I want to indcate the match by placing an X by each match. View my attachment for reference. I don't know if it makes a difference but the columns are centered in my original spreadsheet.
View 8 Replies View RelatedI'm trying to compare values in 2 separate columns to see how many times the same value appears in both columns. Ideally I would be able to insert a range function to compare the values in the column "ID 1" against the values in column "ID 2" and return the count of times that a value appears in both columns. For example 2122, 1112 and 1718 appear in both columns and I would like the formula to return a count of 3.
ID 1ID 2
12342122
45671112
89101718
11122678
13144544
15162324
17189987
19201215
21221928
1976
2576
2345
4678
In my actual project I'm comparing 2 columns in the same worksheet. The column are column B with data in cells B2:B10266 against column C with data in cells C2:C18560.
what I'm after is a macro to check the contents of Column 'A' against column 'B' and display any duplicates in Columns 'C' & 'D'.
N.B. The headings of Columns C & D are :-
C = Value Found in Column A
D = Value Found in Column B
Any duplicate entries logged in columns C & D should be listed in C2,C3,C4....C20 and D2,D3,D4......D20 etc (in effect creating two new lists)
I need to compare three cells of random dates shown in Column E, F,& G with Row's H5:AK5, H7:AK7, H9:AK7 (the Dates to these rows is Static on row H3:AK3.) EX: ROW 5 has Start Date, End Date (1) and End Date (2). Compare Cell H3 between Start Date & End Date (1). If H3 falls between or equal to Start and End Date(1) then highlight cell H5. Proceed till AK3 (higlighting only the cells H5:AK5). Then compare cell H3 between or equal to End Date (1) and End Date (2) (higlighting only the cells H5:AK5). Then do the same for ROW 7 and ROW 9.
To make things a bit more difficult I need to have " WK#" in Row 14 (these WK# is on another tab called "Task" of the workbook) needs to be displayed in Row's H4:AK4, H6:AK6, & H8:AK8. EX: Compare Date in D15 between or equal to Start Date & End Date (1) then display Wk# in D14 in H4. Continue till all dates in
D15:Z15 are compared to Start Date & End Date (1) and WK#'s in Row D14:Z14 are inputted if applicable in Row H4:AK4, H6:AK6, H8:AK8. I hope this is not confusing. I can't seem to use the upload option so here is alink to download a jpg of the sheet
I am trying to write a function that will compare the text of cell "A2" to the text of cell "B2" and display cell "A2"'s text characters that didnt match from cell "B2" in column C. Can anyone help me out with writing this formula?
EX: ....
I have a dataset of shifts and want to compare each shift that needs to be filled to a list of requests for time off (vacation, etc).
For one cell the code is: =IF(ISERROR(SEARCH(B1, A1), 0,1)
Where A1 is the column of requests in comma delimited forme (ie: "AB,CD,EF").
Where B1 is the column containing the person assigned to shift 1 (ie: "AB")
In this case, would return a "1" as no error was returned, as AB was found in the list. Here "1" would represent a schedule conflict.
Without creating many cells for each shift- there are 20 shifts- can I create an array or string together this type of "SEARCH" function?
way to have the vehicle registration date compared to todays date and have it return either due next month, due or over due.
Todays date is in format month/day/year, registration is only by month/year. Todays date is in fixed location in worksheet updated by function Today()
Basically a formula that resembles =If(registration date < todays date, overdue, If( registration date = todays date, due, If(registration date = todays date+1month, next month, If( registration date > todays date + 1 month, 0))))
With the expiry date as currently set, the code should show the second message box but it shows the first instead.
Sub datechange()
Dim expiry As Date
Dim now As Date
'This line sets the expiry date as 1/5/2006
expiry = DateSerial(2006, 5, 1)
If now < expiry Then
MsgBox "Your subscription will expire in May 2007"
Else
MsgBox "Your subscription has expired"
End If
End Sub
2014-07-30_16-52-23.png
Fist I want to compare ColB=ColH, if TRUE, compare colA=colG, if TRUE, again compare colC=colI, IF all this conditions true, then give (colD-colJ) on colL.
all the unmatched rows in 2 tables to populate with different for each table
I need to compare add Column A&B in sheet1 and column A&B in sheet two and compare the two result for the difference(like vlookup).
formula to merge two cells in two sheet and compare.
i've check the other threads on how to compare two columns but for some reason it is still not working for me.
I have 2 columns. Column A is the master column and column B is the comparing list. If the company that is listed in Column B (Anywhere in column B) matches exactly with the company name in column A, I would like it to say "check" in column C.
I have two diffrent sets of columns of data on a spreadsheet one column set is A,B the other is D,E I want a formula or makro that will check columns A,B and compare it to D,E and if it finds a match will paste it in G,H is that possible and how would I do this?
View 9 Replies View RelatedI have two worksheets but have a same column named "Admin No.". I will need to compare the 2 "admin no." column.
Example:
Worksheet 1
Admin No.Name
1111Ali
2222James
3333Janet
4444Lihua
5555Ting Ting
6666Jasmine
Worksheet 2
Admin No.Name
1100Alvin
2200John
3300Mavis
4411Haoyi
5555Ting Ting
6677Jason
I will ike to compare both "admin no." column and when worksheet 1 5555 can be find in worksheet 2, it will return True. 6666 cannot find in worksheet 2 then it will return false.
I have two tables (sheets) that I am working with. One has only the date and the other has date and time in the same column. Here are examples:
Date
Count
8/22/2014
8/23/2014
8/24/2014
Date
Data
8/22/2014 20:05
1
[Code]...
I need to count all of the entries for each day. If I use the following formula it returns a zero because the one sheet only uses date while the other includes time as well:
[Code] ......
However, if I go to Sheet2, insert a new column and use the follow formula to only pull the date from the date/time cell.
[Code] .....
(I drag this down so that each row now has a value with only the date value in it), and compare against this new column, it works like a charm.
However, my goal is to be able to not create this additional column and just add the INT formula into the COUNTIF formula. For example, if I try doing this:
[Code] ......
I get a nondiscript formula error.
How I can compare the date column to the date/time column without having to create a new column on sheet2 using the INT formula?
Attached File : temp.xlsx‎
I want to have a new macro/button to redo the chart cells based on the dates in cols T and U (abt 400 entries). T has the start date and U has the end date.
Row 9 - X9: CJ9 have dates for about 10 months (weekdays only)
Column J have either of these two values: A or B
Column C has either of these two values: C or blank
I would envisage it going through each row, checking:
If date at top of that col was between the dates in cols T & U
then
if col J = 'A' then set cell to black block
else if col J = 'B'
then
if col C = C (closed) then set cell to red block
else set cell to blue block
I have numeric value in columns B, D, F, H.
I want to compare the values of these four cells in each row and update columns M (with the minimum value) and N (with the column of minimum value).
How can I manage this comparison?
I need to compare two columns A and B with a result in column E. BUT I don't want the result to be added together. ( since it's receipt numbers ) SO my formula is incorrect I need a formula that will show the receipt numbers next to each other divided by a comma or forward slash...
View 7 Replies View RelatedI have column A with 228 rows and column D with 314 rows. Both columns have the same data except that D has different data. I would like to line up everything that is the same in A and D and everything else in column D that is not the same move to G. Is there a quick way to do this?
View 5 Replies View RelatedI can find lots of ways to compare two lists with single columns, but I need a very basic guide to comparing multiple ones across two sets of data and then highlighting or extracting the unique records. I would prefer to keep the data in the existing columns for later sorting and other purposes.
I currently have the two datasets as two separate worksheets in an Excel 2003 file. The two datasets consist of the same three columns containing strings of text, but there is quite a difference in the number of rows. Dataset One is c. 3550 records, Dataset 2 is c. 1600. There are no duplicate records within each dataset, but there are duplications across the datasets and the records are in a different order, so it's not a matter of comparing Row 1 to Row 1 and so on. The data look a bit like this (semi-colons to show columns):
DATASET 1
Group;Family;Name
PM;Smith;Mary Anne
PM;Jones;Fred Henry
PD;Wilson;Peter John
PG;Green;William Laurence
...............
I need a Vlookup to look at two columns when searching. here is an example:
Sheet 1 is my report grid to hand out to the employees, A1 has a drop-down list with my employees names and A2 one for the month, when you click an employee name the vlookup formula fills in the information from sheet 2 (data sheet).
Sheet 2 has data like: Col 1= Month, col 2=employee L-name, col 3= production etc...
currently the vlookup formula messes up because the employee name is in there multiple times because of the months column, i have to delete all months except the one i need. formula is: =vlookup(A1,'sheet2'!,B:C,2,false)
this formula will pull the data in sheet two column 3 (production) for the employee that matches.
how can i make it compare first to col 1 (month) and then col 2 (employee).
I want to compare Columns A and B and Insert value in C.
So if Column A is null, then place value of column B in C, otherwise place Value of A in C.
