How To Compare Date And Time Value Against Date Only Value
Aug 24, 2014
I have two tables (sheets) that I am working with. One has only the date and the other has date and time in the same column. Here are examples:
Date
Count
8/22/2014
8/23/2014
8/24/2014
Date
Data
8/22/2014 20:05
1
[Code]...
I need to count all of the entries for each day. If I use the following formula it returns a zero because the one sheet only uses date while the other includes time as well:
[Code] ......
However, if I go to Sheet2, insert a new column and use the follow formula to only pull the date from the date/time cell.
[Code] .....
(I drag this down so that each row now has a value with only the date value in it), and compare against this new column, it works like a charm.
However, my goal is to be able to not create this additional column and just add the INT formula into the COUNTIF formula. For example, if I try doing this:
[Code] ......
I get a nondiscript formula error.
How I can compare the date column to the date/time column without having to create a new column on sheet2 using the INT formula?
Attached File : temp.xlsx
View 11 Replies
ADVERTISEMENT
Jan 18, 2007
I need to compare the date from the user input and the date listed on excel. How can I compare it? Is it correct? lngCmp = Val( Cells(I, 31))
Dim lngBegin As Long, lngEnd As Long, lngCmp As Date, lngResults As Long
lngBegin = 9 'beggining of data
lngEnd = 232 'end of data
lngCmp = InputBox("Please enter the date", "Begining of the week")
Lngcmp1 = DateAdd("d", 1, lngCmp)
lngCmp2 = DateAdd("d", 2, lngCmp)
lngCmp3 = DateAdd("d", 3, lngCmp)
lngCmp4 = DateAdd("d", 4, lngCmp)
lngCmp5 = DateAdd("d", 5, lngCmp)
'lngCmp1 = lngCmp + 1
'lngCmp2 = lngCmp + 2
'lngCmp3 = lngCmp + 3
'lngCmp4 = lngCmp + 4
'lngCmp5 = lngCmp + 5
lngResults = 0
lngResults1 = 0
lngResults2 = 0..................................
View 2 Replies
View Related
Mar 12, 2014
I get a downloaded report from one of my application. Two columns have date and time data. I need to compare these two columns (subtract) and come up with a value in another column next to it to do some analysis on an ongoing basis.
So I know how to compare date and time in two cells but the problem I have is second set of date / time have other text mixed with it and there is some character that Find/Replace can not find (it looks like the "pipe" | character) and I can't replace or delete that character. Additionally when I click on that cell (B1 in attachment) I don't see this pipe character in the top formula section (fx) but I do see this character in the cell itself.
how I can either get rid of this character or extract just the date / time information from cell B1 to be able to compare cell A1 easily?
View 8 Replies
View Related
Oct 10, 2007
I have two identical web query's on the same sheet. One from column A to column I and the other one from column K to column S, and both have 404 rows. The one on the left (from column A to I) autorefreshes every 60 minutes and the one on the right (from column K to S) autorefreshes every 4 minutes. I want to subtract the numbers in column Q from column G and the ones in column R from column H, and in both cases if the result is bigger than 0 to place a timestamp in column Y(for Q-G), and in column Z (for R-H). I tried with NOW formula, but the timestamp changed every time the web query from the right autorefreshed, no matter of the result. I guess that I have to use VBA codes...but I'm not good at that .
View 9 Replies
View Related
Jun 17, 2006
I am attempting to pick up a date with time entry on a worksheet and place it into a TextBox on a UserForm. Format on the sheet is mm/dd/yyyy h:mm AM/PM. The UserForm is placing the value as mm/dd/yyyy 12:00 AM. here is the
Private Sub UserForm_Initialize()
If Not Range("dDate").Value = "" Then
TextBox2.Value = Range("dDate").Value
TextBox2.Text = Format(DateValue(TextBox2.Text), "mm/dd/yy h:mm AM/PM")
Else
TextBox2.Value = ""
TextBox2.SetFocus
End If
End Sub
"dDate" is the named range where the date is sitting. The format is also set on the TextBox2 exit event. Can anyone see why only the date portion is being transfered with the default 12:00 AM for no time component of the value?
View 3 Replies
View Related
Jul 1, 2008
I need to compare three cells of random dates shown in Column E, F,& G with Row's H5:AK5, H7:AK7, H9:AK7 (the Dates to these rows is Static on row H3:AK3.) EX: ROW 5 has Start Date, End Date (1) and End Date (2). Compare Cell H3 between Start Date & End Date (1). If H3 falls between or equal to Start and End Date(1) then highlight cell H5. Proceed till AK3 (higlighting only the cells H5:AK5). Then compare cell H3 between or equal to End Date (1) and End Date (2) (higlighting only the cells H5:AK5). Then do the same for ROW 7 and ROW 9.
To make things a bit more difficult I need to have " WK#" in Row 14 (these WK# is on another tab called "Task" of the workbook) needs to be displayed in Row's H4:AK4, H6:AK6, & H8:AK8. EX: Compare Date in D15 between or equal to Start Date & End Date (1) then display Wk# in D14 in H4. Continue till all dates in
D15:Z15 are compared to Start Date & End Date (1) and WK#'s in Row D14:Z14 are inputted if applicable in Row H4:AK4, H6:AK6, H8:AK8. I hope this is not confusing. I can't seem to use the upload option so here is alink to download a jpg of the sheet
View 2 Replies
View Related
Jan 2, 2013
I have loaded a .csv file in which the first column contains date/times, e.g. 01/12/2012 00:00. How do I now tell Excel (2010) that this is in fact a date/time format? If I select one or more of the cells, click on the Number dialog box launcher and try to pick a suitable format tghe cells resolutely refuse to budge from being text (i.e. left-justified, still allows me to edit the 'seconds' component to a number > 60). Also which data type should I be using? The only one that appears to have a full date/time format listed is Custom (not Date or Time).
View 4 Replies
View Related
Oct 24, 2007
I have a column of values resulting from subtracting a static date and time from the current date and time.
This means it is constantly updating, which makes it impossible to sort.
All my work depends on sorting those values, though.
View 12 Replies
View Related
Feb 21, 2013
I import data from a program that exports dates and times as text. I have been successful using "text to columns" to separate the time from the date and then using =text(A1,"00:00")+0 to get the time to show as serial time but I'd love to be able to do the whole date/time string in one step. In cell A1 there is data that is general format and is in this format:
01/01/13 00001
No matter how you try to format it, it is not a date or time. For this project I need the serial number for the date/time. Any formula that will format it as date/time and then allow it to show as a serial date/time?
View 3 Replies
View Related
Apr 22, 2008
I have 04/02/08 12:00:01 AM (mm/dd/yy hh:mm:ss AM/PM) in text format in a cell. I need to convert this to date/time custom format as given above so that I can make comparisons with NOW() output.
View 2 Replies
View Related
Jun 18, 2009
way to have the vehicle registration date compared to todays date and have it return either due next month, due or over due.
Todays date is in format month/day/year, registration is only by month/year. Todays date is in fixed location in worksheet updated by function Today()
Basically a formula that resembles =If(registration date < todays date, overdue, If( registration date = todays date, due, If(registration date = todays date+1month, next month, If( registration date > todays date + 1 month, 0))))
View 9 Replies
View Related
Sep 7, 2006
With the expiry date as currently set, the code should show the second message box but it shows the first instead.
Sub datechange()
Dim expiry As Date
Dim now As Date
'This line sets the expiry date as 1/5/2006
expiry = DateSerial(2006, 5, 1)
If now < expiry Then
MsgBox "Your subscription will expire in May 2007"
Else
MsgBox "Your subscription has expired"
End If
End Sub
View 4 Replies
View Related
Jul 19, 2014
I am using Excel 2013. Anyway, the first issue is that I need to pull a date and a time period from text. So, for example, if I see something like Sunday Prime Time 7/6/14 8:37PM, I would want to pull ONLY the "7/6/14 8:37PM" out of it. Each text box could potentially be different, so it might not always be in the same format as "Sunday Prime Time 7/6/14 8:37PM" it might only show just the date and/or the time without all the extra text i.e. 7/6/14 8:37PM. Some of the cells will have text, others might only have just the time or even just the date and the time. The only thing that I am worrying about in each cell is extracting just the date and time. If this is too much to ask of excel, I would be ok with extracting ONLY the time - 8:37PM and not the date, but I would much rather be able to get both the time and date.
THEN, onto part two of my question. After I would pull the dates and times, I need to compare them with each other. So, when I have the same date with two separate times on that date, I need to write a formula to show if those times on that date are less than 30 minutes apart. So, if I have 6 times on 7/6/14, I need to know if any of them are less than 30 minutes apart.
I would need to have the formula say something like "Problem" if the times on 7/6/14 would be 5:30PM, 5:48PM, 7:00PM, 8:00PM, 8:15PM, and 9:00Pm for example. I would like to see the word "Problem" since 5:30PM and 5:48Pm is only 18 minutes apart, and "Problem" after 8:15PM since that is only 15 minutes past the 8:00PM which is obviously under 30 minutes. The times that are more than 30 minutes apart such as 7:00PM and 9:00PM for example are more than 30 minutes apart from any of the other times that were extracted.
View 7 Replies
View Related
Oct 20, 2009
What is the code i need to use to assign a macro to a command button which inserts the current date and time in the selected cell regardless of where that cell is?
View 5 Replies
View Related
Mar 1, 2007
I want to have a new macro/button to redo the chart cells based on the dates in cols T and U (abt 400 entries). T has the start date and U has the end date.
Row 9 - X9: CJ9 have dates for about 10 months (weekdays only)
Column J have either of these two values: A or B
Column C has either of these two values: C or blank
I would envisage it going through each row, checking:
If date at top of that col was between the dates in cols T & U
then
if col J = 'A' then set cell to black block
else if col J = 'B'
then
if col C = C (closed) then set cell to red block
else set cell to blue block
View 2 Replies
View Related
Apr 2, 2008
DONNAS [Single cell, 1st row] 09/08/2003 15:34 [Single cell ( date and time combined) 2nd row]. Do you know of any way that I can move the name, date and time from the above cells to three separate columns on the same row?
View 4 Replies
View Related
Oct 13, 2009
I'm trying to write a VBA code for converting the date/time as text to a date/time value.
The scenario is, I have three different types of text :
ddmmmyy
HH:MM
ddmmmyy:HHMM
I could have the code working fine with the first two types, but not the last one.
View 4 Replies
View Related
May 21, 2008
I have a sheet with a list of dates in it that I wish to format to show the day as well as date and time. I am trying to do this automatically with a macro, below is the before and the desired after.
Before
Format - dd/mm/yyyy hh:mm
Appearance - 29/03/2009 00:30
After
Format - ddd dd/mm/yyyy hh:mm
Appearance - Sun 29/03/2009 00:30
This works fine when I format the cells manually, but when I try to format them via macro '29/03/2009 00:30' becomes 'Sun 29/03/2009 12:30' which is obviously a totally different time! Has anyone got ay idea why it might be doing this?
View 6 Replies
View Related
Oct 19, 2012
I have a spread sheet with a date colume that reads: 2012-06-27-19 I need to have this read like 06/27/2012 but nothing I do is working I have tried to go to the formatting process and backing the hr:mm out and that doesn't work. I really don't want to go line by line to manually correct this issue.. HENCE ... over 2000 lines
Second question: If I have a column that reads 02/15/2012 and another column that reads 3/27/2012 how to a format a 3rd column to make it read total number of days between 1st date and 2nd date?
View 1 Replies
View Related
Apr 30, 2014
I have only one column (A) with thousands of cell entries. Each Cell contains a date and time. (x/xx/xxxx 12:34:56)
For example, Cell A1 = 1/24/13 18:45:22
I want the new cells to only have the time, but have the seconds removed (and not simply hide the seconds). This is because I'll need to run Conditional Formatting to find every cell with a similar time - but I only need similar times within the same minute...it doesn't matter if the seconds are off.
The new cell should just be A1 = 18:45
The real reason I need this is because I need to find every entry that has the same time (with hour and minutes), which I figure I'd use conditional formatting for. My problem is that many entries have the same time but the seconds are off.
Example:
1/22/13 12:23:11
1/24/13 18:45:22
1/24/13 18:45:36
1/26/13 22:33:41
In this example, I'd want Conditional Formatting to highlight cell A2 and A3 because they have the same time of 18:45 (not including the seconds). I figured the best way to go about this would be to remove the date and remove the seconds, and run the search that way. However, any way to accomplish goal without deleting the date and seconds would be just as useful.
View 4 Replies
View Related
Jun 9, 2014
I have a list of dates stored via the following :
20100101 how can I convert this to date/time format to show 01/01/2010?
View 4 Replies
View Related
Aug 16, 2008
I have several hundred rows of date/times which I need to modify just the date (for example 08/23/2007 11:00 to 08/15/2008 11:00). Each row may have a different time so it is just the date I'm targeting for change.
If I manually use the replace dialog, replacing 08/23/2007 with 08/15/2008 works just fine. However, if in code I attempt to use the Cells.Replace function, it does not locate any data to change.
I have found that if I search for the string 8/23/2007, the dates are located and changed. Only when I attempt to find the fully formatted date 08/23/2007 does the function fail.
View 6 Replies
View Related
Feb 2, 2012
I inserted the Date & Time picker Control into my worksheet. I have it linked to a cell. When I change the date, the new date goes into the cell, but it does not appear to be a "date" . The date formulas that use that cell do not evaluate properly. It looks different than when I type a date directly in to the cell (it is left justified). I tried formatting the cell as a date and the format property of the control is set to shortDate.
View 2 Replies
View Related
Sep 8, 2009
I am attempting to create a Spreadsheet which, when double clicking on a cell, loads up a Userform, has some times entered, calculates the difference and submits any overtime done.
I've had no problems doing the userform and the related coding to do the calculations. However, when I want to enter a time without the date (For example 0900), no matter how I do this the date always appears at the top in the formula bar.
I have tried http://www.cpearson.com/excel/DateTimeEntry.htm
to no avail, even when I just used this code in a blank workbook it still returns the date when I enter 1700 for example. And I have made sure the cell is formatted in "hh:mm:ss".
So, what is driving me stir crazy is why on earth my Excel is not letting me just enter times without colons and returning a date, no matter the formatting.
View 9 Replies
View Related
Jan 9, 2010
In Cell A1 = 01/12/2008 12:00:00 AM
I am trying to extract in cell A2 = 01/12/2008 and A3 = 12:00:00 AM.
But I will end up having a string of numbers each time I try to right (A1,11).
My end result is I will use the values in A3 if between 12am to 5am, assign a value in A4 as "Night Shift"
A1 = 01/12/2008 12:00:00AM
A2 = 01/12/2008
A3 = 12:00:00Am
A4 = if(And(A3>12,A3<5),"Night Shift","Day Shift")
View 7 Replies
View Related
Sep 9, 2009
In B7 i have 10/09/2009 19:30:00. In C7 i have 11/09/2009 21:30:00. What i want is C7-B7 and give the number of hours in between which should be 26 hours. I've used this:
View 5 Replies
View Related
Apr 18, 2014
I am working on an Inventory Spreadsheet. I have need it to date time stamp that willpopulate a different cell /field when text are entered in a different cell/field and will not change all the previous dates entered on the spreadsheetevery time I re-open the spreadsheet. I formula I am using is =IF(E3<>"",IF(D15="",NOW(),D15),"")and it changes each time I open thesheet to do the inventory so I do not know the date of the last inventory. Iwant to capture the actual date that the inventory was completed in thesecond/different cell?
View 9 Replies
View Related
Mar 13, 2007
I have this It compares a date from a listbox(myTime) to the date on a sheet
If y have my mouse above the code, they look like they are the same value
But it evaluates to false?? If CDate(rngFind. Offset(0, 1)) = CDate(myTime) Then...do something or could this be the best solution:
If timevalue(CDate(rngFind.Offset(0, 1))) = timevalue(CDate(myTime))Then...do something
View 8 Replies
View Related
Dec 7, 2013
I'm looking for a formula which compare total sales or customer count by date and It should automatically get updated daily.
For an example In my historic Data I have details of the sales from 1st to 31st of December 2012. Also I'm updating the present details day by day. Is it possible to compare the total sales from 1st to 7th of december 2012 to the total sales from 1st to 7th of 2013 automatically and then tomorrow it will compare from 1st to 8th 2012 to 1st to 8th in 2013 and will go on until the end of the month?
View 8 Replies
View Related
Mar 11, 2012
I have problem comparing dates in two columns. In these columns, with dates, there can be instead of date letter "X". When I try to compare dates I don't get good results. I have to see that date in column P has been before date in column Q (example 22.02.2012 (P), 23.02.2012(Q), OK).
Code:
Sub test()
For Each oneCell In Range("Q2:Q60001")
Select Case oneCell.Value
Case Is "X"
If oneCell.Offset(0, -1) "X" Then
[Code] ........
View 4 Replies
View Related
