I have been trying to see if I can peform the following, I want to be able to have Day 1 (Col B) by using the Start and Finisg Columns Place a 1 in column H for every hour between the Start and Finish times.
This needs to be done for each of the Day in column B, ie 7 Days.
Coulmn's FGH is repeated for the 7 days....
I have a long column of info as below. I want to extract (the name changes)- "SEAPORT TWN" etc and also "01.30" and place into separate columns say G and H at the next available cell.
**
SWITCHLIST FOR TRAIN---Grain Spec -East
DEPARTURE TIME from WESTTOWN is 01:00
TOWN STOP---SEAPRT TWN Arriving at 01:30
PICKUPS
Terminal Shipping Burl North 460020 GRAINCAR empty Elevator Co. Ltd.
Terminal Shipping Sante Fe 100396 GRAINCAR empty Elevator Co. Ltd.
Train should leave this town with 2 car(s)
TOWN STOP---PRARIE TWN Arriving at 02:00
SETOUTS
Elevator Co. Ltd. Burl North 460020 GRAINCAR Grn w/Wht Lttrs -4 Bay
Elevator Co. Ltd. Sante Fe 100396 GRAINCAR Maroon w/Wht Ltr -3 Bay
1/05/2007 8:57:52 a.m. ...............................
I want to compare two columns. I would like to see if the contents of column B appear anywhere in column A, for any amount of rows, and if it does, to place the match in col C.
So in the example below, red in B1 would be checked in A1 through A1000 or however long A is. When any row has red, place that match in that row for C.
This would be repeated until all rows in B are complete.
Example
Col A: red
Col B: red
Col C: red
Col A: red
Col B: blue
Col C: not found
Is it possible to use numbers for columns in place of letters? If so, can you specify the starting number?
View 2 Replies View Related******** ******************** ************************************************************************>Microsoft Excel - Win_calc.xls___Running: 11.0 : OS = Windows XP (F)ile (E)dit (V)iew (I)nsert (O)ptions (T)ools (D)ata (W)indow (H)elp (A)boutQ21=
QRSTUVWX21TickerLowestLowest*NameBOALEHBEARSecond*priceSecond*name22AT*US95/BEAR10210095**23ARW*US50/LEH605070**24BSX*US65/LEH666567**25CBS*US53/BEAR/MS555453**HVOL8*
[HtmlMaker 2.42] To see the formula in the cells just click on the cells hyperlink or click the Name box
PLEASE DO NOT QUOTE THIS TABLE IMAGE ON SAME PAGE! OTHEWISE, ERROR OF JavaScript OCCUR.
This is my general template. I get prices from BOA, LEH AND BEAR on the four companies listed. Then I use the Min function to tell me the best price (I'm buying). Then I use some IF statements to tell me who's the "Lowest Name" (lowest price):
=IF($G2=$C2,"/"&$G$1,"")&IF($H2=$C2,"/"&$H$1,"")&IF($I2=$C2,"/"&$I$1,"")&IF($J2=$C2,"/"&$J$1,"")&IF($K2=$C2,"/"&$K$1,"")&IF($L2=C2,"/"&L$1,"")&IF($M2=$C2,"/"&$M$1,"")
It checks if a cell is = the lowest cell value, then returns the header. This formula refers to different columns than my displayed sheet because Im hiding so cells and I just copied this to another section of my sheet. There's probably a better way to do this but this is what I have do far. I use this for 50 company names and 5 or six dealer banks (BOA, LEH, etc)
I'd like column that gives me the Second Place price and one that gives me the associated dealer (BOA, LEH).
I have a database with 2 un identical columns: A, and B. Each cell in Column A should have an equivelant cell somewhere in column B. I want a code that could compare each cell in column A with each cell in Column B. Cells in A that don't have equivelant in B should have their values printed in column C.
View 4 Replies View Relatedusing code to take raw data from one workbook <book1> tab <Phase1RawData> and pasting to summary workbook <book2> onto <SummarySheet>. New data is available with each Phase (14 in all) and will eventually fill all cells as indicated in the Summary Sheet Page. However raw data has in any one Phase only the columns up to the Phase its currently at. So Phase 1 will only have Phase 1 column, Phase two will have columns for Phase 1 and 2, Phase 3 will have 1,2,3 and so on (the example Book1 has two example sheets for phase 1 and phase 2 data - so each phase has a column added with the previous columns remaining.)
The problem is in having the summary sheet always show all 14 phases colmns (as in the example attached) irrespective of which Phase is being updated. So if up to Phase 3, insert the raw data available will be colmns for Phase 1, 2 and 3 - but I need ensure after that has been updated only the remaining Phase colums to 14 show. That is, if Phase 1, 2 or 3 etc are now in place, insert the remaining blank Phase columns to, and including Phase 14. Need to do this at end of each phase until 14 is met. The data up to column S is all from the raw data original sheet - Items from Column T I insert independantly as the data is transferred.
the traditional count if statement doesnt return what I need. I have an array of values that need to be checked.
Column: A B C D E
Data: .25 .49 .18 (Criteria 1 Result) (Criteria 2 Result)
What I need to do is check the data for the following conditions and if it meets the crirteria I need excel to place a 1 in column D or E.
Criteria 1
If any of the coulmn data contains a value less than .5 I need a 1 placed in column D
Criteria 2
If any of the column data contains a value greater than .5 but less than 1.0, I need a 1 placed in Column E. I tried using an IF/ Count If statement, but cant seem to get it to return the result I need.
I am after a macro to do the following, my visual basic skills are very limited (non existant):- Look at the date in cell A1 on Sheet 'Live Report' and err 'remember it' Copy a range of cells from A3 to A10 on 'Live Report' Go to sheet 'Monthly Summary' and find the date that had been remembered previously (this date will be in column A on 'Monthly Summary' which will probably be a mixture of values and formulas). After the date has been found paste special and transpose the 'values only' copied range from 'Live Report' (A3 to A10) in column B on 'Monthly Summary' next to the date that has been found in Column A.
View 2 Replies View RelatedI have a pivot that includes customer data and I need to create an average for each row based on the first populated column for each customer. After one month of units appears for the customer, I need to calculate the average going forward, and if there are blanks after that they should be treated as 0 in the average. Below is an example of my description of the pivot.
Jan Feb Mar Apr
Customer #1 1 1 3
Customer #2 1 3
Customer #3 2 2
So, the average for customer #1 would be calculated from Column B to Column E, and factor column D as a 0 in that calculation. Customer 2's average would start in Column C and go to Column E, and factor column E as a 0 in that calculation. Customer 3's average would start in column D to column E.
I recently installed 'windows 7 ultimates' , and after i insalled Excel 2007 .. the columns start from right to lfet (..., C, B, A), I want to reverse it to start from left to right (A, B, C, ...), I don't know whether the new ystem 'windows 7 ultimates' has some effect on it to be modified like this. moreover, the language of system is English. so how to solve it
View 3 Replies View RelatedI have a column that has dates in it in this format:
Friday 07/03/2014
Friday 07/03/2014
Friday 07/03/2014
Friday 07/03/2014
Saturday 08/03/14
Saturday 08/03/14
It lives on Google Docs as well, there are multiple people putting dates in and sometimes people will use just CAPS for the day name.
What I would like to achieve is that if someone puts another Friday 07/03/2014 under the Saturdays in the list, I want it to automatically sort itself under the Friday 07/03/2014 ones.
Whole row would need to move those spots up, not just the one cell.
Column B values are the average of the most recent five values in column A.
The formula in Cell C1 is “=B7” so that the value in C1 is 1.17. My question is: When I place a value in cell A8, which will result in the average of the five numbers in column A4-A8 being placed in cell B8 how do I make the value in C1 change to be the value which is in cell B8 rather than the value which is in cell B7?
Note: I just want to be able to pick up the most recent average value – the
method whereby it is done is of no consequence. However I cannot think
of an alternative. Example:.....
The first five columns of my table contain row titles. I'd like to keep these columns stationary while I scroll horizontally through the remainder of the columns.
As it is now, only the row number remains stationary, but I really don't need the numbers, just the row titles.
Is there any way to do this? And would this also be possible with column headings (so I can scroll down without them moving up)?
I have a table as follows: [URL] - note: cells containing times and temperatures are numeric values, I've used custom formatting to add " mins" and "°C" on the end
In one cell, a user can input a time period (in mins), and in another cell, I would like to output the start and end columns (in letter/s) for the chosen time.
For example, in the link above, if the value inputted '30' then the start column is 'C' and the end column is 'G'. If the user had inputted '60', then the results would be 'H' and 'K', etc.
I am able to find the start column with the following equation:
=SUBSTITUTE(ADDRESS(1,MATCH(VALUE,C2:P2,0)+2,4),"1","")
I am struggling, however, to find the end column for the chosen time.
If each time had the same number of temperatures then it would be a simple case of adding the number of temperatures per time, minus 1, after the "+2".
My first idea was to copy the above function, but to change the "0" in the MATCH function to "-1", in order to find the next greatest time value. However, it appears that using "-1" in the MATCH function only works if the range is in descending order - my times are always in ascending order.
I have a further problem in that the time periods are not always the same values (i.e. it won't always be 30-60-90-120, it could for example be 30-45-60-75). So as far as I know, there is no way in advance of knowing the next time period up (and then subsequently taking one column to the left).
One possible workaround I have considered involves the following:
- Add a new row between rows 2 and 3, which has the time values in each cell (i.e. from column C, values of 30-30-30-30-30-60-60-60-60-90-90-90-120-120) - effectively duplicating the time row, but not merging cells
- Use the COUNTIF function to find the number of cells in that row containing the chosen time
- Add this value, minus 1, after the "+2" in the above formula, i.e. =SUBSTITUTE(ADDRESS(1,MATCH(VALUE,C2:P2,0)+2+COUNTIF(C3:P3,"="&VALUE")-1,4),"1","")
In Column A, anytime a specific "text" appears, I want to concatenate the information in the row, and place it into worksheet Data-list under a specific heading.
[URL]
The formula I would use (not vba) is =IF(A3="FN",B3,""), then I just copy it all the way down. However there are 27K cells, which is why I want a VBA Code
What I would like to do is if a string e.g. "*12/18/09*" is found in column A, then place "1" in column B. There are many rows that I would like to search. Either a formula or VBA would be fine.
View 6 Replies View RelatedHow do you make a column automatically place items in alphabetical order?
Also, how do you make a column automatically put dates in order?
I am trying to place the contents of an array into a column on the sheet. I can enter the array into 1 cell (which strings the values), but I can't seem to make range(1)=array(1).
View 9 Replies View RelatedI have a macro that imputs data from an external database and puts it into a temporary worksheet. This data has 3 columns (ID, Date, Amount). I am then making another sheet which has X number of tables (one for each ID), with the years being the column headings, and months being the row headings. ie.
| ID X
| +------+------+------+--->
| | 1999 | 2000 | 2001 |
+------+------+------+------+--->
| Jan | $100 | $250 | $300 |
+------+------+------+------+--->
| Feb | $200 | $300 | $200 |
+------+------+------+------+--->
| Mar | $300 | $250 | $100 |
+------+------+------+------+--->
| Sum | $600 | $800 | $600 |
| +------+------+------+--->
| ID Y
| +------+------+------+--->
| | 1999 | 2000 | 2001 |
+------+------+------+------+--->
| Jan | $100 | $250 | $300 |
+------+------+------+------+--->
| Feb | $200 | $300 | $200 |
+------+------+------+------+--->
| Mar | $300 | $250 | $100 |
+------+------+------+------+--->
| Sum | $600 | $800 | $600 |
| +------+------+------+--->
Currently I have a few hidden fields for the DSUM Criteria. I start making the tables. And then filling in table based off of the month and year. Doing so I need 3 criteria:
>= First Day of the Month
<= Last Day of the Month
= ID #
The problem is it takes Excel too long to fill in the 3 criteria fields, calculate the result, copy the result, and place it into the correct place on the table. Is there another way to get this data into the correct tables faster? Instead of using DSUM?
I am trying to make a macro that will query a column J4 for a date, if the date is found say "Wednesday, July 4, 2012" (J8) get the text from Column K8 "Independence Day" and insert the text in Cell (H1).
The Macro Prints sign in sheets with the date in H2, it only prints Monday through friday. Then skips the weekend and the next date will start the following Monday.
The Federal Holiday schedule is in column range J (Date) and K (Holiday)
This is where I am stuck ....
EmployeeTimeSheet_2012.xlsm
I am using the below code to sum from "L2" to LastRow2
Code:
LastRow2 = ActiveSheet.Range("L6500").End(xlUp).row
LastRow3 = ActiveSheet.Range("L6500").End(xlUp).End(xlUp).row
Cells(LastRow2 + 3, 16).Formula = "=SUM(L2:L" & LastRow2 & ")"
How can I replace “L2” with “LastRow3” which is a dynamic starting point for the range sum?
I have a sheet of data from a SQL server in Sheet1 that will be updated periodically. The data is basically structured in a date (column A), and value (column B) format.
I'm trying to create some graph functionality so that it would be possible to graph desired ranges of the data by only entering start and end dates.
That is, in Sheet 2, I enter, say, 12/31/1990 in A1, and 12/10/2006, in A2, and a column is created in SHEET3 that represents this data. The request is similar to 'datebetween' in a pivot table. It would be ok if the data created is a pivot table, however, I've struggled to find a way to do this. It seems that any range you name cannot use variables.
If this question is misleading, I'm trying to use the code
Sheet2.Range("A1:A10").CopySheet1.Range("A2")
However, I want "A1:A10" to be variables. Something like:
Sheet1.Range("Range("F6").Value:Range("F9").Value").Copy Sheet2.Range("A2")***Note: this doesn't work b/c of range object.
I have a large spreadsheet converted from pdf whose data still appears in A4 reading format.
I need to move part columns of data from 6 columns to form 1 large column in column A.
For example, move range B8 to B76 beneath range A8 to A76 and range C8 to C76 beneath that etc, page by page working through all 270 pages !
Also need to delete unnecessary 'page headers' throughout as in rows 2-6
I have a column that is listing steps in multiple processes. I have each step 1 marked with a number 1 and would like to have a macro run that will read the column and when it sees a 1 move down to the next row and insert a 2, 3, 4, etc. until it hits the next 1 and then repeat the process. I am unsure how to build this as I am just starting to learn some VERY basic VB scripting.
View 5 Replies View RelatedIn my attachment I am trying to identify rows within Table 2 that do not fit in with Table 1. For example in Table 2, Row 16 has a Start Date of 17.11.2010 and an End Date of 13.11.2011 for ID number 151. This record has to be shown as "OK" because it fits into the date range of Row 103 of Table 1 i.e. Table 1 Row 103 has a Start Date of 01.01.2010 and an End Date of 28.02.2013 for ID 15. In other words the Start Date of Table 2 Row 16 is GE the Start date of Table 1 Row 103, and the End Date of Table 2 Row 16 is LE the End Date of the same Row 103 of Table 1, therefore this reocrd is OK.
Row 14 of Table 2 needs to be shown as "NOT OK" because it has a Start Date of 12.01.2013 and an End Date of 31.03.2013 for ID 15 and this doesn't fit any date range of any Row in Table 1 for ID 15.
I want to search for a word in column A and when I find it I want to copy it to column B.
Column A is a description that can be 6 or 7 words long. Column B is a single word.
Example:
Col A
Engine Kit, V-8, 306, forged.
I need to copy the word Kit to column B.
I have a excelsheet that looks like this:
Column A | Column B | Column C
Los Angeles | Fire Dept | 3
Los Angeles | Health Services | 12
New York | Fire Dept | 8
New York | Health Services | 22
New York | Internal Services | 100
New York | Public Works | 7
Chicago | Health Services | 15
Chicago | Public Works | 56
Chicago | Social Services | 4
And I am trying to make it look like this:
Fire Dept
Health Services
Internal Services
Public Works
Social Services
Los Angeles
3
12
New York
8
22
100
7
Chicago
15
56
4
When I hide columns in a column chart the different fill colors I used on specific columns no longer show up with the colors I originally had. Is there a way to maintain the proper sequence of column fill colors even when some columns are hidden?
View 1 Replies View RelatedWhat I have is a long list of about 100 items. I would like to set up an excel sheet that allows me to place checkboxes in each row and then whatever checkboxes have been checked, to simply collate and print out ONLY the check boxes that have been checked.
I have gotten as far as to create and rename the checkboxes but my skill ends there. I also need to know how to get each checkbox to correspond to a row.
I appreciate ANY help that you can give me.
EDIT: this doesnt NEED to be checkboxes, it can be optionbuttons if that is easier... simply something to select/deselect and print.
1.1 a blah
1.1 b blah
2.1 a blah
2.1b blah
3.1a blah
3.1b blah
3.3.a blah
etc blah
etc