I am using the below code to sum from "L2" to LastRow2
Code:
LastRow2 = ActiveSheet.Range("L6500").End(xlUp).row
LastRow3 = ActiveSheet.Range("L6500").End(xlUp).End(xlUp).row
Cells(LastRow2 + 3, 16).Formula = "=SUM(L2:L" & LastRow2 & ")"
How can I replace “L2” with “LastRow3” which is a dynamic starting point for the range sum?
I would like to create a dynamic range of numeric type in a single column. Only the precise position of one middle cell is known, let's say $A$20, but the range is supposed to extend above and below $A$20 and to finally include all adjunctive, positive and negative numbers in that very column.
Having read the ozgrid-resources on dynamic ranges let me experiment with the following line, however, it seems to include all entries in the column disregarding the format type or the fact that they should all be adjunctive (meaning that wherever there's a text entry it should be seen as the natural end of it): ....
I have a sheet of data from a SQL server in Sheet1 that will be updated periodically. The data is basically structured in a date (column A), and value (column B) format.
I'm trying to create some graph functionality so that it would be possible to graph desired ranges of the data by only entering start and end dates.
That is, in Sheet 2, I enter, say, 12/31/1990 in A1, and 12/10/2006, in A2, and a column is created in SHEET3 that represents this data. The request is similar to 'datebetween' in a pivot table. It would be ok if the data created is a pivot table, however, I've struggled to find a way to do this. It seems that any range you name cannot use variables.
If this question is misleading, I'm trying to use the code
Sheet2.Range("A1:A10").CopySheet1.Range("A2")
However, I want "A1:A10" to be variables. Something like:
Sheet1.Range("Range("F6").Value:Range("F9").Value").Copy Sheet2.Range("A2")***Note: this doesn't work b/c of range object.
Of course you can make a Range like this
View 3 Replies View RelatedI need a Text to Column VBA code that will find a dynamic range. Example: I will be sorting range B1:X20. After it has been sorted, I need a VBA Text to Columns code to be applied to dynamic range H1:H20. I can write VBA language that will identify H1 as Range1 and H20 as Range2. How do I get the VBA to identify Range1:Range2 for Text to Column to be applied? Can "Dim" languace assist in locating the dynamic range?
View 5 Replies View RelatedI'm trying to define a dynamic column range call 'Cost'
If it starts in Column C, row 4 [C4]. I want the range that to go down to the Row I have defined as 'subtotal'
The user will be able to insert new rows above 'subtotal'
How can I define Column C4 so that any new row added will be including in the defined row range 'Cost'?
I need to create a validated list of month choices, and the list needs to be filled with the names (Month and year, I.E. Feb-07) of the last 13 months for which we have data.
(We get our data about 8 weeks late, so being that it is mid april now I only have data now up to the end of Feb-08. I have created a chart in which the viewer can change the month to view but up to now it has only been for the current year, now they want to see the past 13 months, obviously I don't want to go in and change this every time the next months' data is entered.
So, what offset formula do I use to reference the month-year names which are spread across Row 1, presently in columns C thru N, and the next months data (March) will go in column O, then April's in column, P, etc
I have tried several variations of this; =OFFSET(C1,0,0,0, COUNTA($1:$!)) but how do I get only the last 13 months?
I was wondering if there was a way to create a two cell dynamic range that doesn't expand, but instead shifts.
The cells that I'm interested in are always at the bottom of the column of data. For example, the first two cells I want as my range are C13 and D13. Then, for my next use of the range, I would like it to include C14 and D14.
I want to refer to columns by column order (i.e. A=1, B=2, etc.)
I want to sum a range for dynamic columns and fixed widths (i.e. B2:B5 or F2:F5, etc).
i have C_N as variant and i am trying to write the formula but desperately getting syntax error.
Code:
Range("M5") = WorksheetFunction.Sum(Range(C_N& "2" : C_N&"5")))
i tried before to make another easier formula like
Code:
=Range("N5:N" & LastRow)
and it worked.
Can you use Row & Column numbers in a Formula the way you can in VBA?
I want to do the same as Range(Cells(5,2)) in VBA EXCEPT in a Formula
because I want to use named ranges for the Row & column entries. (And I don't want to have to run a macro every time a change is made. The spreadsheet is huge enough already. It's slow on my machine & I have the biggets baddest PC in the company!)
Using Formulas only, (not VBA) I would like to create a Dynamic Named Range, LastUsedRow, which is the ROW NUMBER of the Last Used Cell in Column C
(it would = 470)
Also I have an existing Named Range HeaderRowNum (it = 16)
Currently I have a LOT of formulas like:
=SUMPRODUCT(($E17:$E470)*(--(CO17:CO470>0)))
problem is any new data must be added between Rows 17 & 470
So I would like to create dynamic new forumlas to read like:
SUMPRODUCT( (Cells(HeaderRowNum+1,5) : (LastUsed Row,5)) * (--(Cells(HeaderRowNum+1,93) : (LastUsed Row,93))>0) )...............
I have a long (~42,000) list of dates and times (some including zeros). I would like to name these ranges and use a formula to find the last entry in each column. I know the lists will never go over 45,000.
The data is in this format:
1/31/14
23:58:00
1/30/14
[Code]....
The data will not always be consecutive, so I imagine the criteria would be something like (if there were such a thing) "ISDATE" or something of the sort.
How would I write a formula to dynamically calculate the row number of the last date or time in the column? (In this case, it would be 6.)
I've got two pivot table reports working off one dataset.
I've named the range Recharge with the formula as below..
=OFFSET('Recharge'!$A$1,0,0,COUNTA('ABC Recharge'!$A:$A),16)
But this uses column A as the longest column... but sometimes it will be column I - how can the formula be adapted ? or can it be ? i've been looking at the Max function and trying to incorporate that but my limited brainpower has gone to mush.
How would I select a dynamic range in VBA without using name a range in Excel. I have searched for possible answers, however they use xldown, or xlup which works great for non-empty cells. My problem need to select the area where there are empty cells. Here is a snap shot of the data looks like:
Trade Date A B C D E
2008-Feb-11 450,432
2008-Feb-13
2008-Feb-15
The cell with number is where I got the formulas. Now i wish to fill that formula with the rest of the area. However, the problem is the number of rows and number of columns may change in the future. So I need to select those empty areas in a dynamic way.
I want to define a dynamic named range based on the last date in a range (AE4 down). Unfortunately there are gaps in this range where no date is in a cell.
View 5 Replies View RelatedSelecting the range from Multiple Column data.
Currently, it is:
[Code]....
I have data from columns A:E
I have a range which will change in size & in content, & I want this to be a Named Range at whatever size it is.
Reason I want to is because I want to make a Validation List with this dynamic range. I also want a Validation list which lists the content of 2 or more dynamic ranges which may or may not be on the same worksheet - is this possible?
i.e.
First dynamic range: called "Milestones" at A11
Second dynamic range: called "Activities" at A25
& make a Validation list that will list content of both
I have a pivot that includes customer data and I need to create an average for each row based on the first populated column for each customer. After one month of units appears for the customer, I need to calculate the average going forward, and if there are blanks after that they should be treated as 0 in the average. Below is an example of my description of the pivot.
Jan Feb Mar Apr
Customer #1 1 1 3
Customer #2 1 3
Customer #3 2 2
So, the average for customer #1 would be calculated from Column B to Column E, and factor column D as a 0 in that calculation. Customer 2's average would start in Column C and go to Column E, and factor column E as a 0 in that calculation. Customer 3's average would start in column D to column E.
How to sum using variable start and end points?
For example,
Column A is the list of start dates, and Column B is the list of end dates to be used at the variables.
Column C is a list of dates, and Column D is the corresponding temperature data to Column C.
What I would like to do is create a new column (E) that sums the temperature data from Column D based on the start and end dates from Column A and B respectively (these dates to be used to match the dates in Column C).
2012PlayerStats.sample1.xlsx
I have a list of players and the team they play for in Columns A and B.
In column E I have created a list of only unique names and in F I need the Team the played for last. However with Vlookup I am only getting the team they played for first. How can I get the team they played for last?
I have tried vlookup and index/match and get the same.
can anyone help me how to create a macro which will copy range of data based on a criteria? I have a worksheet which contains dates on column C rows C30:C64, dates would start from march 29 to may 2. how can I copy the range of data from April 1 to April 30? the criteria which will be copied will always be the start of the of the month up to the end of the month...meaning if the dates placed is like April 26 to June 6, it would automatically extract the range for May 1 to May 31 and place this on another sheet.
View 6 Replies View RelatedI have a daily collection of data based on half hour meter readings. Responsibility for this data is to be split between core and non-core hours so for example core hours would be from 6:00 to 18:30.
What i would like to do is have a combobox for both the start time and end time allowing the user to change these as appropriate.
Where i'm struggling is using these comboboxes to select the data between these two times and total the values per row.
My data is currently arranged with the times (staring at 00:00) running horizontally on row 14.
I'm trying to write a bit of code that will allow me to clear some sheets. One of the sheets has formula for x number of rows, and these need to be left intact. Under these forumla there is an area where data is pasted, and this needs to be cleared becfore starting the process.
Colum A is blank, apart from cell A1 (the column heading) and another cell (variable row) with the value 'Paste here'. I've used this variable cell in other macros on the sheet as a marker, so need this to stay. I was going to use this code below, but I don't know how to tell it to select from the current active cell to the bottom of the spreadsheet.
Any macro or a VB script to fill the numbers in between the "start" and "end" range . The only input that will be provided is the start and end of the range.
For example if the start = 100 000 and end = 100 010.
The output should be
100 000
100 001
100 002
100 003
100 004
100 005
100 006
100 007
100 008
100 009
100 010
I need help in simulating the functionality of the OFFSET function with some of standard Excel functions which are shown at this webpage (I will be using this converter to generate the webpage from the sheet):
Spreadsheet Converter Supported Functions
I ask this because I need to create an interactive online calculator which absolutely needs to have the ability to allow the user to select the RANGE of the data to be analyzed. I included an example sheet with the offset function in the pink cellDo you think any other standard excel function can be used to simulate its functionality?
I need to create a range of cells in Column A. I know the first cell, A2. The final occupied cell will vary. Once I have the range object I would like to step through and analyse each cell in turn using a For/Each loop.
The code I have so far is:
Public all_structures As Range 'Range required for for/each loop Column
Public last_structure As Range 'Last cell in Column
Public molcell As Range 'Current cell in range
' Establish range of cells in Column A
Set last_structure = Range("A2").End(xlDown)
Set all_structures = Range(Range("A2"), Range(last_structure)) ***
' Loop through each structure in turn
For Each molcell In all_structures
Loop code In here
Next molcell
When I run I get an error message of "Run-time error '1004': Method 'Range' of object '_Global' failed". It does not like the line marked ***.
Within range Sheet1!D4:D423, how can I have a macro called RestartClock start any time the Enter key is selected within a cell for that range?
View 7 Replies View RelatedIs there a way to start match from a relative position?
Say a match I have in column "A" returns 344. Is it possible to start a new match for column "B" from that spot, instead of having it return a match starting at the top?
I have a column that is listing steps in multiple processes. I have each step 1 marked with a number 1 and would like to have a macro run that will read the column and when it sees a 1 move down to the next row and insert a 2, 3, 4, etc. until it hits the next 1 and then repeat the process. I am unsure how to build this as I am just starting to learn some VERY basic VB scripting.
View 5 Replies View RelatedI have been trying to see if I can peform the following, I want to be able to have Day 1 (Col B) by using the Start and Finisg Columns Place a 1 in column H for every hour between the Start and Finish times.
This needs to be done for each of the Day in column B, ie 7 Days.
Coulmn's FGH is repeated for the 7 days....
I am looking to have the data ranges in tab 'Type' update automatically in 'Output' for a particular start date. So for example if I enter LBO into cell E3 in the 'Output' tab it will input the data range for LBO from tab 'Type' but from a specific start date.
I know I can achieve part of this via LookUp functions but it is the start date that has me stumped.