I'm trying to delete rows which has columns that appears to be blank. Below code worked fine but it took about 15 min for the macro to work through the spreadsheet.
View 2 RepliesI am trying to delete rows that do not have values in column B. This is a quote form that takes up over 1000 rows but not all are needed (ie lines that do not have any value in B "qty"). Is there a way do have excel delete these without doing it manually?
View 3 Replies View RelatedI have data input in a particular column, say Column C.
I would like to have a macro that deletes the rows where the corresponding entry in Column C are blank.
In addition, there are multiple worksheets with the same data format in the same spreadsheet, but the number of row varies. It would be great if the macro can delete the row with blank cell in that column across all worksheet.
i want to delete entire blank row from column C2:C300 i mean if i have data c2:c100 then c101:c300 delete entire blank rows
View 4 Replies View RelatedI need a code that will delete an entire column (J) if J6 is blank.
View 3 Replies View Relatedway to find blank cells in a column(s) and delete the rows corresponding to the cell number. I found this code in one of the previous threads on ozgrid but it just doesnt work for me because it is slowing me down. Please help (I am working on around 60000 rows in Excel 2007)
Sub DeleteBlankARows()
With Application
.Calculation = xlCalculationManual
. ScreenUpdating = False
Dim r As Long
For r = Cells(Rows.Count, 11).End(xlUp).Row To 1 Step -1
If Cells(r, 11) = "" Then Rows(r).Delete
Next r
.Calculation = xlCalculationAutomatic
.ScreenUpdating = True
End With
End Sub
a way to do the reverse viz. for a particular column, I'd like to delete the row corresponding to the non-blank cell in the column.
Yes thats exactly what I am looking for. deleting rows if a cell in a particular column is not empty/has data.
View 7 Replies View RelatedI have this sheet(sheet2) with some data , I have 2 macro, my problems at this time is that I am looking for macro that delete only the blank rows that under the rows with {SELECT ....} and the under the blank rows with {CELL-ENTER......} and all the rest blank leave in place , I am also looking for option to integrate the new macro with the existing one and come up with one macro that I can refer to click button , in case that it is unfeasible , it's ok with me , I just will call the other macro at the from the first macro that I have.
View 4 Replies View RelatedIs there a way to delete or clear a row on exit if no end date has gone into it. i.e. if the user clicks on the X button in the top right hand corner.
Every time the user clicks on start the date goes into the next empty row, if finish is clicked then the end date will go into the cell next to it. See example below. Here the user has started and ended correctly
column
AB
StartEnd
24/10/09 24/10/09
24/10/09 24/10/09
In the example below the user has forgotten to click on the finish button when they first clicked on start, they exited excel instead and no end date was inputted. When the user clicked on start again the start date went to the row below, however as there was no end date the last time, this time when they clicked on end button, then end date went to the first BLANK CELL
column
AB
StartEnd
24/10/09 24/10/09
24/10/09
I would want the delete row or clear row option, which ever would work best, to happen if the user clicked on the X in top right and corner or Exited excel via File.
Ideally I would like the row cleared and not deleted, I have read Clare Watts thread and we both seems to be having a similar problem, I have used some of the examples from her thread but non seem to work. So I now wish to go with a delete or clear row option on exit, if possible.
The row changes every time. The column for deleting or clearing would be A to AB. The end date goes in to Column B
So if the user clicked on start but did not click on the Finish Button then the last row with no end date would be deleted or cleared on exit from column A to AB
column
AB
StartEnd
24/10/09 24/10/09
24/10/09(This is deleted or Cleared of exit via X top right hand corner)
If cells in column A3:A10000 are blank / unpopulated I would like to delete the blank rows.
View 6 Replies View RelatedI have multiple tables like the one in the picture and have to duplicate this code for different known ranges.
View 11 Replies View RelatedWhat I have are invoices that span an entire month that I need to convert into a format for the billing department. The columns I have right now are: "Invoice Number"Cost CenterAccountFundType of Service" Date of Completion"Unit PriceQty Total Price
I need to generate a file with the headings as: Cost CenterFund"Date of Completion"Account Total Price. Since Total Price only appears on the rows that have the final information I need, I want to have a script that grabs every line in which the Total Price column has data, generate a file of the summary lines, then throw that through another macro to reformat it into the final format, or just do it in one step. In summary I need to grab rows where Column I is not empty, whats the best way to do this?
I have the following codes to delete all blank rows in column A
Dim lastrow As Long
lastrow = Sheet1.Range("A" & Rows.Count).End(xlUp).Row
MsgBox lastrow
With Sheet1
For t = 1 To lastrow
If Cells(t, 1) = "" Then
Rows(t).Delete
End If
Next t
End With
End Sub
Although it is working , it is not deleting all the blank rows at once, I have to keep pressing on the macro button running the macro several times, until all blank rows are completely deleted.
I have an imported report in a spreadsheet. It imports to three columns. I need to check each row in column A for three seperate criteria and delete the rows I don't need. I need to delete blank rows and check next row for page header info. Delete these and next rows to next blank cell. Check next row for page header and not delete if not page header. Several rows down will be a cell with 23 blank spaces before the word Reg: and sometimes other words past this but always this first. This row is to be kept. I looked at the FAQ's example of Deleting but I don't think it will work. I also need to put a key word in column A at a point where I want to stop. This report is a couple thousand rows long so a VBA procedure would really save time. I have a procedure I use to check for two zero's in two cells that hide these rows but I couldn't modify it to work on this report.
View 9 Replies View RelatedI have a spreadsheet that is updated daily with data that falls into one of two categories: a) completely new to the sheet or b) existing from the day before but not taken care of yet. The items which fall into category a are evaluated, and notes added to the sheet. The items in category b must be compared to the new data, and duplicated lines deleted but notes from previous evaluation must be kept on the sheet. In addition, anything on the sheet that is not included in the new information needs to be deleted. I've set up a sheet with all old and new data with dates the data showed up as well as the notes associated with the old data, and have concatenated all the info from each row into column V (from another suggestion I got on a similar but not exactly the same problem which I also still haven't figured out). The sheet has been sorted by col V so any matching rows should be within 3 or 4 rows of the original. The problem is that my code does absolutely zilch!
Sub DeleteRepeatedRows()
' goes through coord. sheet and identifies duplicated lines, copies the date from the old row
' copies it into the new line, then deletes the old line
Dim rCell As Range
For Each rCell In Selection
If rCell.Value = rCell.Offset(1, 0).Value Then
rCell.EntireRow.Delete
End If
If rCell.Value = rCell.Offset(2, 0).Value Then
rCell.EntireRow.Delete
End If.........................................
I have a excel doc with 8000 names I need to delete the people who are listed on 7 rows.
There are no blank rows and Colume A has the names sorted.
I am building a template ("Table") that will import data from 4 other spreadsheets and then format the data once its all in the template. I need to delete all rows where a name didn't import. The names are landing in column B (starting with B22), so I set up my code using an active cell loop macro to examine each cell to see if it was empty, and then to delete the row if it were. I've tried 4-5 iterations of code but nothing is working correctly.
Apparently when the fields are copied over from the other spreadsheets, some empty cells actually have something in them such that they are not completely blank. What syntax I can use so that I capture every instance of a blank/empty cell and delete that corresponding row? Some of the code I've tried is below.
[Code] .....
I have a excel file which contains dublicate rows. The duplicate rows can be identified based on few cell/column values. I need a macro to delete the duplicate rows when the below condition is satisfied: let us consider row 5 and row 6:
If column 7,12,13,16,17,18,19,23,24,27,28,29,30 in row 5 = row 6 then row 6 has to be deleted. This condition has to be followed for all other rows in the excel used range. Have attached the sample workbook.
I have been trying to delete about 86k rows in my table in a worksheet. It has been over 5 hours now and it is still running to delete. any better solution? or how long do i need to wait for the system to finish its work?
View 1 Replies View RelatedI have a real problem with a file I'm working on. It has invoice numbers in one column, followed by payment milestones. In the row underneath, there is an 'x' to mark if payment was made in a particular zone, e.g.:
6010136113221/06/201005/07/201022/07/201016/09/2010XXX6010136113313/07/201030/07/201013/08/201014/10/2010XXX
The problem is that there are two rows with data, a blank row, then another two rows with data. I have thousands of rows and need a quick-fix to delete the blanks.
a VBA code to delete blank rows.
The current worksheet has data which is retrieved from other worksheets.
For example:
Current worksheet A1= Sheet1!A1
Current worksheet A10= Sheet2!A1
Current worksheet A20= Sheet13!A1
The range of this current worksheet is A1:F1287 and inbetween there are blank rows. The cells in the current worksheet are not technically blank, because each cell (A1:F1287) retrieves the information from the respective worksheet.
I would like to know of a VBA code to delete a whole blank row/-s (all columns of this row is blank) inbetween the range. Therefore, if there is a whole blank row, this row to be deleted and to go to the next row that shows information . In other words, instead of me manually searching and deleting whole empty rows; a VBA code for this task.
modified my code to have the data continue to the next row where it left off before jump to other sheets. The code below creates too many blank rows of all sheets (9213, 9316, 9501 and 9601).
After the code stops execute, I have to delete all the blank rows. This takes too long, approximately 5 minutes for each sheet...
I am trying to write a macro that will check from 1 to 143 columns..and if all the columns are empty then it has to delete that entire line. Totals rows are over 35000. I am using excel 2007. I have written the below code. Could someone pl help me in enhancing this.. or a better way as this is taking about an hour to complete.
Sub Costa()
Dim i As Long
Dim j As Integer
j = 2
For i = 2 To 37735
loop1: For j = j To 143
If Cells(i, j) = "" Then
j = j + 1
GoTo loop1
Cells(i, j).EntireRow.Delete
Else
j = 2
GoTo loop3
End If
Next j
Cells(i, j).EntireRow.Delete
loop3: Next i
End Sub
I have 2 columns of data E and F. Column E has 11 different words that randomly repeat, Column F has 10 years of dates, about 1,000 entries (10/11/12 format). Both columns values come from formulas.
I am trying to copy cells E & F to columns K & L starting in row 2 only if there is is data in column E (one of the 11 words) and skipping all others rows. Both the E & F values of tthe row must be copied together, i.e if text is in E45, then copy E45 and F45 into column K and L starting with K2 & L2. This is a task which will be repeated multiple times as data is replaced in columns A-D.
I am trying to delete a rows that contains a certain value. When I run the command from VB, it works. When I run the command from the tools menu in Excel, it works. When I run the command by clicking the command button located on the spreadsheet, it returns an error message "Delete method of range class failed" and highlights the line
Cells(x, 2).EntireRow.Delete
Private Sub CommandButton1_Click()
'Deletes expired coupons
x = 9
Do
If (Cells(x, 7).Value < Cells(2, 3).Value) Then
Cells(x, 2).EntireRow.Delete
Else
x = x + 1
End If
Loop Until Cells(x, 2).Value = ""
End Sub
I need to detect blank rows and then delete them but for the formula not be be affected
In the example attached there are 4 components but i may only need to use 3 so row 4 would be blank
i need to find the blank rows and delete them and for the formula in cells G12:H14 to be update as necessary
at the moment if i delete the rows i get a REF# in place of the cell which has been deleted
i have tried this on a simple formula and when you delete a row the formula changes as required
I've got a code that generates some worksheets in a fairly large workbook. The code is run monthly and replaces the already existing worksheets.
The problem is that each newly generated worksheets contains more than 1 million rows, which means that the size of each worksheet is around 5MB.
I need a code which allows me to delete all blank rows starting with row 1000 in those worksheets.
I have created a file where I use the Subtotal function. Once I collapse the information to only give me the Total, I would like to copy the Total rows into another worksheet. However, when I do this I get blank lines in between. I am trying to find a way to delete the blank rows in between the Total rows I need. Is there a way to do this with the auto filter function?
View 1 Replies View RelatedI would like VBA code to delete all rows where there are blanks in Col B
View 2 Replies View RelatedI need to loop through data when it finds a blank it need to delete that row and 15 rows down and loop through whole data set find blank row and delete 15 rows down.
It's been years since I did any VBA, and I forgot. Do I need to use offset to acheive this task?