i'm excel macro now at the stage where i could already deleted duplicates data from column A to H. But i need to keep data in column J onwards.(column I i leave it blank to separate the data). currently i'm using these for deletion. (i put [] as i was unable to upload my question)
Delete_DuplicateReferences()
Dim LLoop As Integer
Dim LTestLoop As Integer
Dim Lrows As Integer
Dim LRange As String
Dim LCnt As Integer
'Column values
Dim LColA_1, LColB_1, LColC_1, LColD_1, LColE_1, LColF_1, LColG_1, LColH_1 As String
Dim LColA_2, LColB_2, LColC_2, LColD_2, LColE_2, LColF_2, LColG_2, LColH_2 As String
'Test first 2000 rows in spreadsheet for duplicates (delete any duplicates found)
Lrows = 2000.................
Column B on the spredsheet gets the Part Description vaules, we copy and paste from Customers excel and unfortunatly some descriptions contain 3asteriks in a row (***) and I need to import this into Access later on and Access will not except asteriks. Find and replace doesnt seem to work like i hoped , it replaces everything in cell not just part of it . If someone has a Formula that will work that would be ok too, it does not have ot be VBA
EXAMPLE Part Descriptions: RADIAL TIE DOWN LUG (4/500's) *** Formed FINES V-PLOW/ SCRAPER MOUNT ANGLE; Rev. A ***Formed
I am trying to delete part of a text string for a range of cells. The code I have so far deletes the first set of letters but is looking in every cell in the range.
Ideally I would like it to only look in the cells of col B where there is data then only delete the first 10 letters if the cell begins with "Service ID"
Sub DeleteServiceID() Dim c As Range For Each c In Range("B1:B1000") c.Value = Right(c.Value, 10) Next c End Sub
I am looking for a formula to delete information from the middle of a text string. I have ~ 1,000 lines of data. Each text string is composed of the same way. The data I am looking for is two parts of the string (1) all the text up to and including the first “%” character (2) the last six characters.
Raw Data CARDINAL HEALTH 5.5%13CARDINAL 5.513 CARDINAL HLTH 5.5 061513 UST BILL 0%09US TREAS BILL 0%09 UST BILL 0.0 092409 WORLD SAVINGS 4.125%09WORLD 4.125%09 WORLD SVGS 4.125 121509 JP MORGAN 5.375%12JP 5.375%12 JPMORGAN CHS5.375 100112
Desired Result CARDINAL HEALTH 5.5% 061513 UST BILL 0% 092409 WORLD SAVINGS 4.125% 121509 JP MORGAN 5.375% 100112
Can you cut out part of a number and replace it in another cell. For example
A1 come in as ###+### and it will not always be a three digts all the time but I would like to keep the number in front of the "+" in A1 and the number behind the "+" into A2 cell.
I am trying to move through the worksheets and delete all columns with "Accession" in contained in them. I have to do this with an external macro as the spreadsheet with the data is created from another program. I tried this and get an 'Object or With block variable not set' error and the debug highlights the Cells. Find line of the code.
Also, the number of columns could be variable within the spreadsheet as it is compiled by the other program.
Sub DelAccessionNum() Dim Wrkst As Worksheet For Each Wrkst In ActiveWorkbook.Worksheets Cells.Find(What:="Accession", After:=ActiveCell, LookIn:=xlFormulas, LookAt:= _ xlPart, SearchOrder:=xlByRows, SearchDirection:=xlPrevious, MatchCase:=False _ , SearchFormat:=False).Activate On Error Goto Completed: Selection.EntireColumn.Delete Shift:=xlToLeft Completed: Next End Sub
I have data sets on multiple worksheets within a workbook (over 70). Based on the begining of a string, I need to count all instances with that begining, and if there are fewer than 12 instances, delete the entire row.
Data set example:
In this example, I need to count each instance of rows starting with 1/* - 9/*, and delete rows as mentioned. In other data sets the string might start Gi1/*, and so on. In the following code, if I do not loop, and only test against 1 value type, and ONLY run it once, it works. As soone as I try to loop through all possibilities, or run the macro a second time, it blanks out the entire worksheet, starting at row 3.
Dim c As Long c = Worksheets(i).Range("A" & Rows.Count).End(xlUp).Row With Range("A3:A" & c) If Application.WorksheetFunction.CountIf(Worksheets(i).Columns(1), "1/*") < 12 Then . AutoFilter field:=1, Criteria1:="1/*" .Offset(1).Resize(.Rows.Count - 1, 1).EntireRow.Delete .AutoFilter
I have also tried to concatenate a variable with my CountIf criteria, but that fails miserably.
so this gives a part number depending on what number is placed in O6. What I need to do know is look at 2 different cells and for each combination of numbers give a different part number. so if A1 is 2 and B1 is 3 give a certain result.
I have a column of data with letters in each cell, no numerical, only alpha. Now, some of those cells contain the letters "adj sub" as part of the text string in each cell. "Adj sub" is always at the beginning of the text string. As an example, a cell will look like this - "adj sub mhm". I want to delete rows whose cell description does not contain "adj sub" as part of the text in the cell.
Is there any way to remove the first part of a string of text in a cell and save the second part?
The first part of the text string is a team code that has a variable number of numbers, capital letters and sometimes spaces. The second part of the text string is a variable number of words in a team name that all start with a capital letter and have lower case letters. Every line has a different team code and team name.
The original spreadsheet also has a column with just team code. Is there a way of using this column to "subtract" the team code from the text string to just leave the team name?
I have a spreadsheet with 2 worksheets. On the first "active parts" I have a list of active part numbers and on the second "All Parts" I have all of the parts available.
I want to compare every part in the All Parts worksheet to see if the part number exists on the Active Parts sheet - if it's there, I would like it to return the value "Active" in column B in All Parts. I have a formula in column B in All Parts that seems to work for the first few, but as soon as it finds one that is active, the rest of the cells below all return "Active".
I have 2 basic parts to a Macro which need to be separated by a pause of 1 second, before proceeding to the next part of the macro. Then pause for 1 second, and loop.
Application.Wait is no good to me as the spreadsheet must remain live, editable, and receiving updates from an external program linked via DDE. Below is the ...
I have an excel file having part code,name,vendor and Qty ( Quantity ).
My problem is that I want to apply an excel formula to pick up that vendor code who have highest Qty of a part code.The condition is that S.No.should not be disturbed.This file is so large,but here I have taken an example,
What I am trying to do is automatically move the date received and the total qty received from the Rcvg. Log sheet to the RFMs Release sheet.
The problem is:
1) I don't know what I'm doing
2) On the Rcvg. Log several part numbers that are the same with different Qtys.
3) on the Rcvg. Log the are several part numbers that are the same using different programs.
What I would like to do is combine all the same part numbers with the same program add the total Qty received and paste the date received and total Qty into the RFMs Release sheet in the proper part numbers row.
Is this possible?
Attached is a shortened copy of the spreadsheet normally there about 3000 entries.
I would like a macro to find the columns named "apple" and "peach" and delete them. These would always be in row 1 but would always be in different column letters which is why I want the macro to simply find these columns by their name and not by their column letter.
And yes, I do mean the entire column altogether, shifting entire columns to the left. Wipe it off the face of the earth
In one cell I have multiple value:09/16/2013, 09/16/2013, 09/16/2013, 10/15/2013
I want to use the first read which is 08/22/2013. Not always i have multiple dates in my table.This is part of code that I am working on.What I usually do, to get the last value when I have multiple reads is:
I have select the cell C1, the multiple reads(dates) are in the cell B1, so i need the last read(10/15/2013) ;i use this code:
ActiveCell.FormulaR1C1 = "=RIGHT(RC[-1],10)+1"
SO now I want use the same logic but i want to take the first read/date. Also here the cell from where I want to get the value is selected.
Above the multiple reads were in the cell B1 and cell C1 was selected before performing the code, now the code is in the cell B1 and B1 is also selected.
I tried to do ActiveCell.FormulaR1C1 = "=Left(RC[-1],10)" but I rich the value in the cell on left which is A1. I want this for tomorrow since I have something to present.
I have an formula if statement that returns "deletethisrow" if the test is true.
For every occurence of "deletethisrow" I want to delete the row. The number instances will be variable each time I run the file. So maybe it will find that string, maybe it will find 10 instances. I want to do some kind of loop that won't error out when it cannot find "deletethisrow", but will delete the rows for each instance where it does find this string.
I know it was verbose, but if I just do a loop for a fixed number of loops it will error out if it runs out of rows to delete.
formula that will pull out the number preceding the * 60 in the text below? In this particular case I would be looking to get 5 as the result. That number could be any number but in the example below it happens to be a 5.
Channel Tune Duration in Seconds} (ID) >= (5 * 60))
If I have some data in a cell (let's say D1) such as "m-3,s-2,xl-4", what formula can I use in say cell D2 so that if I find the characters "s-" in Cell D1, then it will return the value "2".
Similarly, in say in Cell D3, I would then want to use the same formula but modify it so that if the characters "xl-" are contained within Cell D1, the formula will return "4"
Just "upgraded" my Excel to the 2007 version. In the old Excel, I could superscript part of a cell by highlighting the part I want, then going to "Format" and "Superscript."
In Excel 2007, it doesn't work. Yes, I can highlight the part of the cell I want to superscript, I can right-click and select "format" and "Superscript", and it even then shows as superscripted in the cell. That is, until I hit enter or move to a new cell. Then the superscript is no longer there. The cell is in "general" number format.
By the way, it did work in another cell: mg/l3 (3 superscripted) works. 742 (2 superscripted) doesn't work.
