I am trying to delete part of a text string for a range of cells. The code I have so far deletes the first set of letters but is looking in every cell in the range.
Ideally I would like it to only look in the cells of col B where there is data then only delete the first 10 letters if the cell begins with "Service ID"
Sub DeleteServiceID()
Dim c As Range
For Each c In Range("B1:B1000")
c.Value = Right(c.Value, 10)
Next c
End Sub
I am looking for a formula to delete information from the middle of a text string. I have ~ 1,000 lines of data. Each text string is composed of the same way. The data I am looking for is two parts of the string (1) all the text up to and including the first “%” character (2) the last six characters.
Raw Data CARDINAL HEALTH 5.5%13CARDINAL 5.513 CARDINAL HLTH 5.5 061513 UST BILL 0%09US TREAS BILL 0%09 UST BILL 0.0 092409 WORLD SAVINGS 4.125%09WORLD 4.125%09 WORLD SVGS 4.125 121509 JP MORGAN 5.375%12JP 5.375%12 JPMORGAN CHS5.375 100112
Desired Result CARDINAL HEALTH 5.5% 061513 UST BILL 0% 092409 WORLD SAVINGS 4.125% 121509 JP MORGAN 5.375% 100112
I have a column of data with letters in each cell, no numerical, only alpha. Now, some of those cells contain the letters "adj sub" as part of the text string in each cell. "Adj sub" is always at the beginning of the text string. As an example, a cell will look like this - "adj sub mhm". I want to delete rows whose cell description does not contain "adj sub" as part of the text in the cell.
Is there any way to remove the first part of a string of text in a cell and save the second part?
The first part of the text string is a team code that has a variable number of numbers, capital letters and sometimes spaces. The second part of the text string is a variable number of words in a team name that all start with a capital letter and have lower case letters. Every line has a different team code and team name.
The original spreadsheet also has a column with just team code. Is there a way of using this column to "subtract" the team code from the text string to just leave the team name?
I have data sets on multiple worksheets within a workbook (over 70). Based on the begining of a string, I need to count all instances with that begining, and if there are fewer than 12 instances, delete the entire row.
Data set example:
In this example, I need to count each instance of rows starting with 1/* - 9/*, and delete rows as mentioned. In other data sets the string might start Gi1/*, and so on. In the following code, if I do not loop, and only test against 1 value type, and ONLY run it once, it works. As soone as I try to loop through all possibilities, or run the macro a second time, it blanks out the entire worksheet, starting at row 3.
Dim c As Long c = Worksheets(i).Range("A" & Rows.Count).End(xlUp).Row With Range("A3:A" & c) If Application.WorksheetFunction.CountIf(Worksheets(i).Columns(1), "1/*") < 12 Then . AutoFilter field:=1, Criteria1:="1/*" .Offset(1).Resize(.Rows.Count - 1, 1).EntireRow.Delete .AutoFilter
I have also tried to concatenate a variable with my CountIf criteria, but that fails miserably.
I belong to a fantasy cycling league and after every race, I copy the race results to award each rider their points for the day. The site I visit most frequently lists the riders results in this format:
1. Alberto Contador (Spa) Team Sax Bank Tinkoff 4:05:00 2. Lance Armstrong (USA) Team Livestrong etc... 4:06:00
I usually copy the results to my spreadsheet then calculate each riders points.
The'results end up looking like this in Excel:
1. Alberto Contador (Spa) Team Sax Bank Tinkoff 4:05:00 2. Lance Armstrong (USA) Team Livestrong 4:06:00
So, the data ends up in 3 cells. The position in one cell, the rider and their nationality and their team in another, and the time of arrival in another cell
Is there a way in Excel where I can get rid of or delete all the data after a rider's name?
I usually end up pasting the rider information to Word, then replacing the (***) with a tab symbol, then pasting back to Excel and get rid of the data that's after the name by deleting the cells to which that data was transferred.
Is there an easier way to do this in Excel, or a macro I can create?...
Is there any way I can Vlookup for just part of a text stiring in a cell. I am trying to vlook if a part number contains the letters “HFR” if it does I want It to refer to the comment I have made in the second column of my vlook table against HFR.
i have a data as above, i wanna to extract the 250ml from the column 1, only 250ml (basically i want to extract the size code like 150g, 100gm from the data above).
I am trying to reference a Name of a place from an order number. To illustrate, University Park, IL can have an order # of 6598641373. The only thing is, all I need to reference is the first four digits, 6598. The other worksheet does not have city and state names, they only have the order #s.
I have to sort list of thousands name (3000 names) and remove duplicates. My problem is majority of the names have their title (i.e) Prof. Dr. Ir. Sir. etc typed in, so I need to copy the title in different cell and have their name only. Here's what I expect:
Current List ----> Column A -->Column B Drs. H. A. Andrew Boston, MRE. ----> Drs. H. --> Andrew Boston, MRE Drs. H. Andrew Smith ----> Drs. H. --> Andrew Smith H. Abd. Mohammed Junus ----> H. --> Abd. Mohammed Junus Prof. DR. Jane Doe, MD ----> Prof. D --> Jane Doe, MD Prof. DR. Ir. H. Randy Wong, MBA --->Prof. DR. Ir. H. -> Randy Wong, MBA Dra. H. A. Karen Patel ----> Dra. H. --> Karen Patel Drs. H. A. M. Kangkong ----> Drs. H. A. --> M. Kangkong Prof. Drs. H. A. Kareem Saleh, Ph.D -> Prof. Drs. H. A. ->Kareem Saleh, Ph.D Dra. Hj. Nina Schorder ----> Dra. Hj. --> Nina Schorder Ir. Abdul Jabbar ----> Ir. --> Abdul Jabbar
Also I have a Userform with 2 ComboBoxes named "ComboBox1" and "ComboBox2". Values in ComboBox1 is "Pull my pants", "Eat my shorts", "Socks for everyone".
What I would like to do is to search though column A and look for any of these textstrings in my selection in ComboBox1 and return the value from column B in column C.
Example: "Pull my pants" is selected in ComboBox1 then the value "pants" should be found in column A and value in column B (25) should be entered in cell C2.
I am fairly new to VBA and have spend hours searching Google and found some formulas like InStr and VLookup. My problem is that I am not sure if these statements will do the job and how to combine them.
I am trying to move through the worksheets and delete all columns with "Accession" in contained in them. I have to do this with an external macro as the spreadsheet with the data is created from another program. I tried this and get an 'Object or With block variable not set' error and the debug highlights the Cells. Find line of the code.
Also, the number of columns could be variable within the spreadsheet as it is compiled by the other program.
Sub DelAccessionNum() Dim Wrkst As Worksheet For Each Wrkst In ActiveWorkbook.Worksheets Cells.Find(What:="Accession", After:=ActiveCell, LookIn:=xlFormulas, LookAt:= _ xlPart, SearchOrder:=xlByRows, SearchDirection:=xlPrevious, MatchCase:=False _ , SearchFormat:=False).Activate On Error Goto Completed: Selection.EntireColumn.Delete Shift:=xlToLeft Completed: Next End Sub
I have an excel file, and on some rows, the "B" column contains the text " Total:" (it does have a leading space). I would like to loop through the first 200 rows (maximum length of the file) and delete all the rows that contain " Total:" in column "B". I have tried:
For i = 1 To 200 range("B" & i).activate If range("B" & i).value = " Total:" Then rows(activecell.row).select selection.delete shift:=xlUp End If Next i
When I step through that code, it just skips over the IF function as if B1 does not equal " Witness:"
formula that will pull out the number preceding the * 60 in the text below? In this particular case I would be looking to get 5 as the result. That number could be any number but in the example below it happens to be a 5.
Channel Tune Duration in Seconds} (ID) >= (5 * 60))
What I want to do is sum all the values after the / for a particalur value before the /:
A 8 B 4
I already tried VLOOKUP, but this function wants you to point to a certain cell to return instead of a just a part of the cell. It should return 5 for the first row to be able to perform a sum for every value of A.
How can I perform such a calculation without having to copy the values to separate cells? Can I contain all of this in one function?
Im sure this cant be done because it defies the logic of the LOOKUP function but I know there are some clever people on here so i thought id ask!!
I have 2 workbooks containing similar data from 2 different sources; the one common data item in both is a clients address but have the age old problem of data quality, which needs sorting eventually but i need a quick fix!
In workbook one for example the address will be recorded as RUSKIN RD
In workbook two the address will be recorded as RUSKIN ROAD
A simple look up wont work obviously as the 2 values dont match, then i thought of using the LEFT function but again this goes against the logic of the VLOOKUP.
I have a list of data that populates B2:B2900 This data is often prefixed by a 'reference code' that I wish to be removed. Now rater than perform this manually aprox 3000 times is there a formula or some VB code that will complete this for me....
eg
The list of data is shown like:
SC7547-05 - Payne, Freda SC8706-08 - Rungren, Todd SC8714-05 - Travis, Randy SC7517-03 - Beach Boys, The Love Song Now You're Gone SC7512-01 - Horton, Johnny SC8721-15 - Journey
So I wish for the SC7547-05 - to be removed from the first example to just leave Payne, Freda and continue this throughout the list However if the data is found not to include this code (as in the 5th/6th examples above) leave it alone
So if the code of formula is run for the above the outcome would be....
Payne, Freda Rungren, Todd Travis, Randy Beach Boys, The Love Song Now You're Gone Horton, Johnny Journey
I'm trying to use this formula to lookup the value in the array that matches, however, the first 4 numbers aren't known (thus why I'm doing the lookup) =VLOOKUP("*"&C2, 'KLIF Data'!A:C,1,0)
The * is being interpreted as a character, is there a way to perform the Vlookup function using a wildcard? Or just ignoring the first 4 characters of the cells in the array would work.
I need to take out the number in the middle, from the period to the space. The number varies in length so just using the mid function doesn't work. Does anyone know how to modify the mid function to return all chars between the period and the space or is there some other function that may work?
If I have a store number (say 1234) and I am trying to search for something which contains 1234 (i.e. the whole string of ABCD1234, ABCD1235, ABCD1236 etc) is it possible to do this in one VLOOKUP formula?
One way of doing it would be to VLOOKUP("ABCD"&"1234",....) but I would rather do it the other way around, to prevent the formula from not working.
I have a conditional formula which gives a value based on what the User specifies.
Example of formula is:
=IF($B$1=0,"CONTACT PERSON - OPTIONAL",IF($B$1=5,"CONTACT PERSON (FINANCE ONLY) - MANDATORY",""))
If the result of the string is " CONTACT PERSON (FINANCE ONLY) - MANDATORY " then - word MANDATORY (not the whole string) should be in RED - words (FINANCE ONLY) should be in BLUE - remaining string should be left in BLANK
I am currently working on creating a dialogue which will allow the user to input a range of worksheets to use for a pivot table.
I want the user to be able to input a variable into the dialogue. For example, I want the input "n-5 - n-1" to mean the 6th from last to the 2nd from last sheets. I am trying to find n - ([0-9]+)? and replace it with Worksheets.Count - $1. In other words, if there are 10 sheets, I want to transform "n-5 - n-1" into "5 - 9".
Here is the code I have so far:
[Code] ....
This has been working for strings like "n" or "n-4" but not "4 - n-3" or "n-5 - n-1".
Here is the code I use afterwards to interpret the string once the n's have been replaced:
I have a worksheet that I need to filter on 8 columns. I need to do this in the form (Col A = Bob OR SAM) AND (Col B = Apple OR Pear OR Banana) AND... etc for 8 columns.
I started this thread and we reached the conclusion that I needed either a macro to list out all the possible combinations on separate lines, or a complex criteria formula.
I'm trying to put together the complex criteria, but I am further stumped by the fact that some of the columns contain multiple terms with comma delimiters, so I'm trying to match part of a string, rather than a whole string, so the usual = ISNUMBER(MATCH(Sheet1!A2,Sheet2!$A:$A,0)) won't work. I tried using =ISNUMBER(FIND(Sheet2!$A:$A,Sheet1!A2)) instead, but I think this fails because it should be an array formula. I tried normal entering and CSE entering, and neither work, so I think this is a dead end.
