I have a list box that shows a range of cells (called emailrange). I want to add a Delete button that enables a selected value in the Listbox to be deleted if necessary (just the cell value not the row).
The code I have thus far is below: ...
Here I have a listbox, but I would like to know if it's possible to be able to sort each header on the userform when clicking on the header?
Also, how should I also delete some entries with a button?
listbox.xlsm
I have two sheets and two listbox's(ColumnCount8) and one command button.
lstInYard rowsource is set to sheet1
lstMilled rowsorce is set to sheet3
Iam trying to cut and paste the selections in lstInYard to lstMilled as well as the corrosponding row values in sheet1 to sheet3 by using cmdMoveSelected click event.
I have two listboxes where I can move tickers from left to right. This is synced with a sheet, such that the tickers also are pasted there too.
But if I use the remove button, I can remove tickers from the listbox, but I cannet delete them from the sheet. If I understand right the listbox only refer to what row the selected is, not what the text is...
And then its a bit tricky. I have tried a code where it just add the list one more time, after the itmes has been removed. And that could work if it hadn't been for the second column which also has a text, this column is updated after every ticker has been moved from left to right.
What I would like to have is a function that would know what the text in the row that I delete, or remove.
This is what I have so far:
Code:
Private Sub cmdMoveToLeft_Click()
Dim i As Integer, j As Integer, k As Integer
Dim RowsStart As Integer
Dim LastRow As Long
Dim Rows As Integer
RowsStart = Me.ListBoxX.ListCount
[Code] .......
I need to create a formula that will remove / delete the last zero from a cell, but only if there is a . in the string and then delete the .
Example
A1
175FP2T12123050079301001 - Leave unchanged
A2
175FP2T12123050079302001.1 - result should be 175FP2T12123050079302011
is it possible to delete/remove all non use cells
for example if i only want the cells A1 THROUGH TO O31
all the rest removed??
On the form, I have a button to add files to a listbox (the box is bound to a worksheet). how to program a button to remove a line from the listbox and the worksheet? here is the code
View 3 Replies View RelatedColumn A has values increasing by 1 but not necessarily each row, i.e.
1 1 1 2 2 2 3 3 3 4 4 4 4 5 5 5 5 7 7 7 8 8 9 10 10 11 11 11 11 12 13 13 14 14 14
I have a listbox which I want to Initialize by listing these values but not duplicating them (so in this case it would contain 1-14). Here is the mindblowingly complicated code I currently have:
[Code].....
This gives me the list as it appears on the sheet but doesn't get rid of the duplicates for me.
I can add an item from one list box to another using the following...
[Code].....
But I want to be able to remove the item from the listbox by clicking it. Tried this but doesn't work!
[Code] ......
I'm trying to loop through each row in a listbox on a userform and remove the value if it isn't equal to the year shown in a CBYear. i can't sem to figure out what to use in my for statement to point the VBA to the Row as it were
View 2 Replies View RelatedSorry, should be a simple one...
I can add an item from one list box to another using the following...
I have 10 checkboxes,
When the checkbox is checked, add the cell next to it to t a listbox in another sheet. (in the sample, the result ,must appear in sheet "relatorio", inside the yellow cells)
When the checkbox is unchecked , remove that item from the listbox.
I have listbox with 1 column source range B6:B25
Some time I want to remove some items before print is there possible to remove such item from listbox as well as corresponding cell without deleting row
I want to be able to have a listbox on a sheet (whether this is already on the sheet or created by a macro I don't care), and have a button next to it. Once the list box has been filled in (with multiple selections) I want the user to press the button, the list box and button disappears and the items selected in the list box are placed into consecutive cells underneath each other.
First problem: To start with I have tried to create the listbox and button using VB
Sub lbtest()
Dim lb As Object, ButCon As Object
Set lb = Sheets("Sheet1").Shapes.AddFormControl(xlListBox, 100, 100, 150, 100)
lb.ControlFormat.MultiSelect = xlSimple
lb.ControlFormat.ListFillRange = "M1:M8"
Set ButCon = Sheets("Sheet1").Shapes.AddFormControl(xlButtonControl, 255, 100, 100, 25)
With ButCon
.OnAction = "Inactive"
.PrintObject = False
End With
i have a multi select listbox that i want to be able to remove the selected items in one hit.
i have not been able to convert code for removing single selected items and could not find a working example.
this is probley the closest though cos its removing items it plays havoc with the listcount
Using Excel 10, Win 7, a User Form with list box control, I only need one column about 7 characters long. (At this point my horizontal scroll bar is taking up more room than the list box window so I'd really like to lose it). I don't see any property options for scroll bars to set.
View 2 Replies View RelatedI need a listbox or combobox in an excel form whos list is created from 2 ranges. for example first name is range a2:a500 second name is rangne b2:b500. the list box should list both coloums in a single list and return the row number. better still if it does not list blank ranges. i have never used a list or combo box before so please explain in terms a simplton can undrstand
View 7 Replies View RelatedAttached small application. Open the application and click on the LISTBOX button. Code for the Filter by Item button or the Filter by Representative button. I would like to select an item from either of those dropdowns in the search box, click on the relevant button and the list box will populate to show the results.
For example, if I were to select Chocolate Bars from the dropdown and click filter by item, I want to see only the three lines [i.e. line 2, 6 and 7] present in the listbox, and I want to be able to doubleclick on any of those lines to go to the record if I wish.
Similarly, if I select Robert from the other dropdown and click Filter by Representative, I want to see the relevant three lines [i.e. 4, 5 and 8] relating to Robert, present in the listbox, where I can again double click to go to the record [i.e. the data entry userform related to particular record selected.
I have attached a file : Form.xlsm
I have a userform that adds and deletes employees. The add button works but im not sure how to get the delete button to work. I have a defined name of "Employee" that is row "A". What I would like to happen is that when a employee is selected from a userform list and the delete button is pressed the employee is deleted and the form is updated.
View 14 Replies View RelatedI would like to add a Command Button that will remove a row from a database. The user will perform a search, which will find the row associated with an employee name, and click a Command Button to remove that row. How can this be done, and are there any issues that might arise from something like this (in terms of formulas)?
Here is the code for the SEARCH:
[Code] .....
I have an option button control on a spreadsheet and I can't seem to remove it from the sheet. I can't right click on it, I can't delete the rows it is in.
View 3 Replies View RelatedI have been using the following but hope there is something a little better to assure that all occurances of a particular command bar button is removed:
View 3 Replies View RelatedI have put a command button on one of my excel sheets and can't remove it. It will not highlight on both left or right clicks. Cant even change the text. how i can remove it.
View 9 Replies View RelatedI have spreadsheet with some very basic formulas that work out sale prices based on people entering buy prices. (It works out the % margin). There are certain areas where the user enters the data - and does not touch any other part of the sheet.
What I am trying to do is add a button which will remove the data from these cells. Almost - a start again button or refresh button. This way it will remove previously entered data - without removing formulas from the cells where the calculation happens. So basically there are cells that a user will enter data - and it is these cells I would like to be able to clear with a button or similar without affecting other cells.
I have a worksheet (attached) that lists various clients in columan C. Column E lists whether each of the clients listed in Column C are 'Existing Business' or 'New Business'. I require a user form that has three radio buttons (one to select 'New Business', another for 'Existing Business' & one for 'All').
When Selecting a radio button, (e.g. 'Existing Business'), I need all clients listed in Column C of the worksheet that also have 'Existing Business' in Column E to be listed in a ListBox on the UserForm (with the second radio button allowing the text box to list 'New Business' and the third to list both Existing and New).
I'm trying to Filter a list by the criteria selected in a listbox, and activated by a command button. My problem is the sort criteria. I have 11 regions, numbered 01EPS through 11EPS. Sorting by any of these criteria works just fine.
The problem is that I also want to be able to sort by ALL of the regions at once. I can do this by using a custom filter. I recorded a macro to see what the difference was, and it simply a matter of changing 01EPS to "=*EPS". However, adding that to my case list results in an error message of "Compile Error: Syntax Error".
Im creating a form with a spin box option - however when i run it in test I always get a black border around the arrows. Its anoying because I want to make the spinbox small and it overtakes the arrows. I looked everywhere in the properties but can't find where to turn it off. I saw the arrorw and background color but nothing about the border.
I attached 2 pictures for reference.
I have created a questionnaire with multiple answers in a userform with multipage.
Everything works fine except on about 10 out of my 30 questions, one of the four answers (all opition buttuns) has a fine dotted line around it.
I really have no clue as to where this line comes from. I have tried deleting the option button and replacing it with a new one. This helped for the concerned button but now the dotted line appeared on another answer of the same question! I have done it several times and each time the dotted line simply shifts from one answer to another but never dissapears! The odd thing is that this only concerns 10 questions, the other 20 are fine...
I have a listbox which brings up my bets for todays horseracing. If say one of my selections is a non-runner, would I be able to add a command button to delete that selection from the source data.
The source range is "AL10:AN24". So all I would want to do is select the selection if it isn't running and click on the command button to delete the selection.
I already have code to sort the source data and would like to add this code to the new code, so once a selection has been deleted the source is also resorted.
Here is that code, in case it is needed:
Private Sub CommandButton1_Click()
Range("SYSTEMS!AL10:AN24").Sort Key1:=Range("SYSTEMS!AL27:AO41"), Order1:=xlAscending
End Sub
I have a listbox in my user form and it has a Rowsource of A1:A225, I need to be able to select a value in the list box and hit Command_Button4 to delete it.
Private Sub CommandButton4_Click()
DeleteName
End Sub
Sub DeleteName()
ListBox1.Value.Select
Selection.ClearContents
End Sub
Also, is there anyway to ignore blank cells in the listbox?