Filter A List By The Criteria Selected In A Listbox, And Activated By A Command Button
Dec 14, 2009
I'm trying to Filter a list by the criteria selected in a listbox, and activated by a command button. My problem is the sort criteria. I have 11 regions, numbered 01EPS through 11EPS. Sorting by any of these criteria works just fine.
The problem is that I also want to be able to sort by ALL of the regions at once. I can do this by using a custom filter. I recorded a macro to see what the difference was, and it simply a matter of changing 01EPS to "=*EPS". However, adding that to my case list results in an error message of "Compile Error: Syntax Error".
I have two sheets and two listbox's(ColumnCount8) and one command button.
lstInYard rowsource is set to sheet1 lstMilled rowsorce is set to sheet3
Iam trying to cut and paste the selections in lstInYard to lstMilled as well as the corrosponding row values in sheet1 to sheet3 by using cmdMoveSelected click event.
I have 9 columns with various data and true/false checkboxes. Column 9 is labelled "Delete" and also contains a true/false checkbox. If column 9 is checked (True) and then a command button is pressed the corresponding row of data is deleted.what would the command button code be.
Sheet1 A2 = Name (chosen off sheet2) A3 = Job Title (chosen off sheet2) A4 = Department (chosen off sheet2)
Sheet2 Column A = List of names Column B = Corresponding Job Title Column C = Corresponding Department
I need to be able to choose a name off sheet2, click the command button and it send selected name, job title, and department to sheet1 to the respective cells.
Attached small application. Open the application and click on the LISTBOX button. Code for the Filter by Item button or the Filter by Representative button. I would like to select an item from either of those dropdowns in the search box, click on the relevant button and the list box will populate to show the results.
For example, if I were to select Chocolate Bars from the dropdown and click filter by item, I want to see only the three lines [i.e. line 2, 6 and 7] present in the listbox, and I want to be able to doubleclick on any of those lines to go to the record if I wish.
Similarly, if I select Robert from the other dropdown and click Filter by Representative, I want to see the relevant three lines [i.e. 4, 5 and 8] relating to Robert, present in the listbox, where I can again double click to go to the record [i.e. the data entry userform related to particular record selected.
I am creating a userform in Excel 2007 which requires a user to pick their name from a drop down box then press Ok, what i want to do is disable the Ok button until the user field has been selected.
How can i use a single command button to do multiple task in Excel 2010.
First Instance I click -- It filters only With Record "Yes" Second Instance I click -- It filters only With Record "No" Third Instance I click -- It removes filter.
I want to filter a list. Within the filter I want to copy a selection of cells and hard copy the formula in those cells (copy paste special values). It is possible to selected the cell and copy them but one cannot paste on a filtered range. The error message I get is "The command cannot be used on multiple selection".
I have a line that is commented out in the bottom - that is an example of what types of filters I want to do but dynamically. Users choose multiselection from a list box then it filters the sheet for them. It is pulling the data from the listboxes but when it is more than one item it is Putting the whole thing in as if I said text = "ABERTI", "AMALON", "BCASTE", "BGELLE", "CFRANC" - No I want to filter by each of these (it believes this is one long string)
I have made a list box and can see the data in it and make multiple choices. What I need to know how to do is put a small button and make the list box appear and make the selected choices, then hide the list box but the button visiable. I would to have check boxes and a scroll bar in the list box by the names but i am stumped. If you could show the code that will make this work that will be great!!! lets say cell B3 to B6 shows cat, dog, mouse, bird. I would check the box and choose cat and bird and have only these 2 show up in the cell B2 separated by a comma. So each line for about 100 lines down will need to have the same choices made but with equipment names, people ect. or is there something better that will work. I run Excel 2003 and windows xp.
I am trying to create a quiz for myself for studying a foreign language. and I am trying to create a command button, so that when clicked, it will randomly pick from a list of names (located in another sheet) and place the name in a desired cell.
Is there a way to provide filter with a list of criteria but when it doesnt match all of the criteria it still uses the filter on the criteria that it does match?
However sometimes for example B will be missing, or H or B H I will be missing etc... is there a way to provide all of the criteria and it will not error if the criteria is not all there?
I have an excel form with a command (submit) button that opens up Outlook when clicked. I am looking for a way to have this submit button disappear when the user selects a specific item in a drop down list to make sure they do not email the form when it is used for a promotion (Promotion would be selected in the drop down).
Is it possible that when you press a command button, that the first thing it does is to execute the code assigned to another command button (IE in another sub).
I'm trying to use an advanced filter to filter a large data set using several parameters. I had this worked out before but there have been some parameters added that have thrown my filter off balance and I'm struggling getting it back.
Here's the criteria I need to filter
Column 1: 85
Column 2: 3
Column 3: BU 1 BU 2 BU 3 BU 4
Column 4: BA 1 BA 2 BA 3 BA 4 BA 5 BA 6 BA 7
Since I have an uneven list of criteria, I'm struggling to figure out the layout with the 'AND' condition. I know I can copy the 85 and 3 figures to each line but when I have 4 figures in column 3 and 7 figures in column 4, how can I create the 'AND' condition for all these criteria?
I am getting a run time error 1004 during a copy-paste of a named range. I've read other posts and the help file and know it's related to defining an object, but I'm not clear on exactly what hasn't been defined.
Private Sub Worksheet_Activate()
Dim lCell As Range Set lCell = Worksheets("Sheet1").Range("C65536").End(xlUp).Offset(1, 0) ' find first blank cell in the column
With Worksheets("Sheet1").Range("AllDates") 'filter duplicate dates . AdvancedFilter Action:=xlFilterCopy, CopyToRange:=Range( _ "E7"), Unique:=True End With
Worksheets("Sheet1").Range("Dates_Filtered").Copy Destination:=Worksheets("Sheet1").Range("lCell") ' fails on this line Range("Dates_Filtered").Clear
I am using this code to hide or unhide rows of text on another sheet:
VB: Sub ProcessSheet1ChangeOnCellJ7(ByVal Target As Range)
Dim sAddress As String Dim sValue As String
'Get the address of the cell that changed without '$' signs sAddress = Target.Address(False, False)
[Code]....
When the "Not Pursuing" list box option is selected (in cell "J7" or "J8" in Sheet 1) I need to add (or over-write) "Not Pursuing" to the range of cells in column "B" (in the "Tasks" sheet), but only for that particular Goal, meaning a limited range of cells in column "B". If the "Pursuing - Show All Tasks" option is selected for a Goal then these same cells need to be blank so that the appropriate person can enter their name into the cell.
The purpose for adding "Not Pursuing" automatically to these yellow highlighted cells is that it will facilitate filtering of tasks by individual in the "Tasks" sheet..
Again I have tried several times to upload a sample file and am unable to, which I know makes it more difficult to solve. (Is there some common mistake people make? I know it's an allowed format and is very small in file size....)
Code solution can be entered directly beneath:
VB: If Target.Value = "Not Pursuing" Then ActiveWorkbook.Sheets("Tasks").Rows("29:29").EntireRow.Hidden = False ActiveWorkbook.Sheets("Tasks").Rows("30:48").EntireRow.Hidden = True
I have a workbook that has three worksheets. The ASU Database sheet contains part numbers and descriptions including specific details that are selected from pull down data validation lists that are named on the third worksheet. I want to have a front end on the first worksheet that has similar data validation lists for the user to select from to create a search criteria that will create a worksheet with only the rows that meet this criteria. I am not sure what method to use to accomplish this.
How can I return name of a command button on click? I want to create some sort buttons on a sheet I will use regularly to speed things up. I thought if I could call each sort button by the column letter the button sits in I can use this in a single sub for all buttons
e.g the button sitting in column A is called "A". when i click the button, it returns it's name to a variable which I can then use to sort column A. I know I could create a seperate routine for each button but I was just trying to think of something neater.
i want to create a save button in sheet 1, on clicking the same the data entered in the particluar cells of sheet 1 should get saved in sheet 2 in given format
This is probably really straight forward but cant see why it happens, the following macro works fine when called by a button created by the form toolbar but doesnt when called by a command button, get the runtime error 1004, "select method of range class failed"
I have read several articles saying using a command button as a toggle button can't be done but some articles have said it is possible using the state properties.
.State = msobuttondown .State = msobuttonup
Is there any way to combine this with the onaction property so that when you press the button, it stays down and activates a macro then when you press it again it pops back up and activates another macro.
I have a database in Excel 2013 and now I want that when a value (a person's name) is entered in a cell. That then the database sort of filters the list for me, so it's still possible to make changes in the entries.
[URL]
Picture above to specify the search, which I would therefore like to edit
Dashboard_Action Pool Team 7.2.xlsm
I have been all morning working on a simplified version of the tutorial from YouTube: Create your own Excel Search Pt. 4. But came back later so only then that I can not change the data:?
I have a userform where I can select multiple items in a listbox and add them to another. I also have the ability to filter the first listbox to make finding items easier. The issue I am having concerns the clear filter button. As currently designed, the clear filter button will reset the initial listbox back to its default values. Ideally, I would like it to reset to the default values excluding those values that currently in the second listbox.
The entire code is below for reference, but it's the sub ClearFilter_Click that I am struggling with.
I found a great bit of Advanced Filter code that works great, and fixed a problem of clearing a cell breaking the filter.
But if I want to increase the criteria from 1 row to 2, so you can start to include And , Or operations, it breaks the filter. Even an attempt at a manual one fails, until you put the criteria range back down to one row, then it's fine again.
I've tried changing the Target Row to >2 but that didn't work. how to make the criteria range bigger, and no problems of breakage if you clear the cells? It makes for a very useful automated Advanced Filter.
Here's the code :
[Code] .....
Database = the named area of raw data. DATA is the name of the raw data worksheet The criteria range should be AZ1:BC3, but of course royally breaks it...
